License 06A not showing 2012 SQL

Hello,
My apologies if this isn't correct forum. I'm currently running SCCM 2012 R2 and when I run the License 06A report, I get all my versions of SQL except for 2012. Is there a hotfix or this intended for a reason I'm unsure of with 2012 licensing of SQL?
Thank you for your time.
Joshua
For every question, the answer is PowerShell.

Hi,
Because of the limitations described in the following article, you'd better verify your license in another way. Especially when we encounter an issue.
http://technet.microsoft.com/en-us/library/cc431386.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

SQL Server Usage Summary page, the count of user/device: does not show for SQL Server 2008

Does MAP tool capture User Summary (count of users, their details) for SQL Server 2008?
At my end, its working for SQL Server 2012 but not showing User Summary for SQL Server 2008..
Does the User Summary only works for SQL Server 2008 Enterprise edition as one of the thread points out?

This is from the
Wiki article:
SQL Server 2008 Enterprise and Datacenter Editions introduced audit event configuration for Windows security logging, which enabled SQL Server 2008 to log logon events to the Windows Security log. The table below shows which versions and editions have the Audit
feature that is needed to record the logon events. MAP cannot obtain user and device access information for any other editions or any older versions of SQL Server.
Datacenter
Enterprise
Business Intelligence
Standard
Workgroup
Web
Express
SQL Server 2008
N/A
Yes
N/A
No
No
No
No
SQL Server 2008 R2
Yes
Yes
N/A
No
No
No
No
SQL Server 2012
N/A
Yes
Yes
Yes
N/A
Yes
Yes
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

View log not showing physical SQL generated in OBIEE 11.1.1.6.7

Hi,
I am currently using OBIEE 11.1.1.6.7 version. In this version I am unable to view the physical SQL generated by OBIEE under Administration --> Manage Marketing Jobs --> Select a Job --> Click on View SQL OR Administration --> Manage Sessions--> Select a Job --> Click on View SQL. It is not showing the physical SQL generated by OBIEE for a report or segment which I have executed.
It was available in previous version i.e. OBIEE 10.1.3.4.2.
I have searched in metalink and it has been suggested to use the following <Filters> section into instanceconfig.xml file. I have added the following details into existing instanceconfig.xml file and then restarted the BI services. Still the problem persist.
<Filters>
<FilterRecord writerClassGroup="Console" path="saw" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="File" path="saw" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="Marketing" path="saw.mktgsqlsubsystem.joblog" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="File" path="saw.httpserver.request" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="File" path="saw.httpserver.response" information="16" warning="31" error="31" trace="32" incident_error="1"/>
</Filters>
Thanks,
Prasanta

Hi,
Thanks for the reply.
We used to view the log details (physical SQL) using Manage Marketing Jobs in OBIEE10g.
In OBIEE11g we can see the job details and when selecting a job (under Action column Details link) there is an option in left pane as 'View Log'. If I click on 'View Log' it is showing as 'No Logs Found'.
Just wanted to confirm if this is an issue in OBIEE11g.
Also, I believe there is a limitation in 'Manage Session' to view the number of job details whereas in 'Manage Marketing Jobs' section we can increase the number of jobs to be displayed.
Thanks,
Prasanta

Variable value not showing in sql developer tool

HI,
I am using sql developer tool. when i take mouse in variable name at debugging its not showing variable value and instead showing variable name data type and owner. but in past i have used sql developer tool where when i take mouse on variable at debugging mode it shows the varable value. please tell me is there any issue in sql develper tool currently i am using.
sql developer version 2.1.0.63

Sorry - but I doubt if you will get much help for that ANCIENT version of Sql Developer.
My best suggestion is to download the current version and see if you still have the problem. There have been HUNDREDS of bug fixes since that version you are using.
Oracle SQL Developer Downloads
Take note that the current version REQUIRES a much higher JDK version than what you may be using. And do NOT try to install the new version on top of the old one.
Install the new version into a totally new folder. You will be ask if you want to import your settings from your current version.

UDF Value not showing in SQL

Dear Experts...
Here is a strange situation in my DB. I have some UDF on A/P Invoice for TAX details print preview.
UDF Values are properly showing in SAP but not in SQL in same table, Same document they are blank in SQL.
I can't understand why SQL does not showing me Value of UDF.
Regards,
Ravi

Hi Ravi,
Run below query in query generator for specific document number and check if udf values are shown or not?
SELECT T0.DocNum, T0.CardCode As 'Vendor Code',T0.CardName As 'Vendor Name', T0.NumAtCard As 'Vendor Ref. No.', T0.DocDate, T0.TaxDate, T0.DocTotal - T0.VatSum As 'Basic Value of Goods', T0.U_CENVAT As 'CENVAT', T0.U_ECess, T0.U_HSCess, T0.U_VAT_4, T0.U_Add_VAT1, T0.U_VAT_12,
T0.U_Add_VAT2, T0.U_CST2, T0.U_CST4, T0.U_CST5, T0.U_Service_Tax, T0.U_ST_ECess, T0.U_ST_HSCess,T0.TotalExpns As 'Others',T0.DocTotal - T0.VATSUM As 'Total' FROM OPCH T0 WHERE T0.docType = 'I' and T0.DocNum=[%0]
Thanks,
Neetu

Installed MySQL ODBC, system DSN configured and working, provider still not showing in SQL 2005 provider list

As per the title, really.
I need to fetch data periodically from a MySQL DB. Installed the 5.1 MySQL 32bit ODBC driver onto the SQL server, configured and tested the DSN, all fine.
Provider still not showing in the list in Management Studio.
Can anyone offer any advice? is it a simple case of restarting services? I haven't tried that due to the server being in production.

Hello,
Is this a 64 bit SQL Server? For a linked server you can only use OleDB data provider, have you also installed OleDB for MySQL? If not, then you have to use the ODBC OleDB provider together with a System DSN.
Olaf Helper
[ Blog] [ Xing] [ MVP]

SCOM 2012 Installation does not show the SQL Server Instance for reporting services

I have an issue when I try to install SCOM 2012 with the Reporting Server feature, so in the step that I have to select a SQL Server Instance I cannot do that, because as you can see in the picture no one option appears.
In my scenario I have a DCSERVER, SQLSERVER2008 R2, SCCMSERVER 2012 and in other server I are trying to install SCOM 2012. I are trying to use the same SQLSERVER to SCOM 2012.
Should I do other procedure on SQL Server before to continue? I will apreciate someone could say me what I need to do to resolve this issue.
Regards,
Paul Mendoza.

Hi Paul
Can you confirm that SQL Reporting Services is installed on the server that you are doing the install.
For a lab environment where you have SCOM Management Server, Web Server on one server and SQL Server on another you need to:
- run setup on the SCOM Server and choose NOT to install reporting. The install here will create the OperationsManager database and OperationsManagerDW (reporting) database.
- run setup on the SQL Server where SQL Reporting Services is installed. Then choose to install reporting. You should then see the SQL Reporting Services instance on the above window which is blank in your screenshot.
Take note of the warning in that window - SCOM uses its own role based security within SQL Reporting Services and this can break other reporting. E.g. you can't install SCOM and SCSM reporting (SQL RS component) together.
Cheers
Graham
New SCOM 2012 Blog! - http://www.systemcentersolutions.com/blog/
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

Susbscription Action not showing in SQL Server Reporting Services Web Part

I am trying to use the SQL Server Reporting Services Report Viewer Web Part in a Share Point site. Under the View section of the Web Part Properties, I am able to select "Show subscription menu item". However, it never shows up. Is
there something else I need to configure to allow this Action menu item to show up?
Thanks in advance!

Hi Gouranga,
According to your description, when you install the SQL Server 2012 Reporting Services Add-in for SharePoint 2013, you find the files are installed into the folder for sharepoint 2010(..../14). Right?
In Reporting Services, Not all features are supported in all combinations of report server, Reporting Services add-in for SharePoint, and SharePoint Products. Please see the linke below:
Supported Combinations of SharePoint and Reporting Services Server and Add-in (SQL Server 2012)
As you can see in the link, the SQL Server 2012 Reporting Services Add-in is only for Sharepoint 2010. This the reason why it's installed into the file for sharepoint 2010.
Reference:
Where to find the Reporting Services add-in for SharePoint Products (SharePoint 2010 and SharePoint 2013)
Install or Uninstall the Reporting Services Add-in for SharePoint
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Network protocols are not showing in sql server network configuration manager

Hi,
We are running 64 bit SQL server 2012 SP1 version. Everything was working fine but suddenly SQL server network configuration showing blank.
So please suggest how do I get it back.

Hello,
Could you please try to repair the installation?
http://technet.microsoft.com/en-us/library/cc646006(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

OBIEE Metadata utility export not showing view SQL

Kind of a random question, but want to make sure I am not missing something.
Using OBIEE 10.1.3.4, I run the Generate Metadata Dictionary utility. It gives me everything EXCEPT the SQL for views that we defined within the OBIEE admin tool. Instead it just calls them physical tables. Is there a way to see the SQL in the dictionary? I've combed through every file it generates, but it isn't there.

Hi,
Thanks for the reply.
We used to view the log details (physical SQL) using Manage Marketing Jobs in OBIEE10g.
In OBIEE11g we can see the job details and when selecting a job (under Action column Details link) there is an option in left pane as 'View Log'. If I click on 'View Log' it is showing as 'No Logs Found'.
Just wanted to confirm if this is an issue in OBIEE11g.
Also, I believe there is a limitation in 'Manage Session' to view the number of job details whereas in 'Manage Marketing Jobs' section we can increase the number of jobs to be displayed.
Thanks,
Prasanta

Default value of date picker not showing in sql query

Hi,
I have a tabular form page with a query similar to the following:
select emp_name, salary from emp_table where trunc(hire_date)=trunc(to_date(:P42_START_DATE))
where P42_START_DATE is the name of a date picker item.
I set the source type of the date picker to be "Only when current value in session state is null" and the value to be "select trunc(next_day(sysdate,'MON')-7) from dual;" - basically the monday of the current week. I set the sequence of the date picker to be 5, and the sequence of the region to be 10. Now, when I open this page, no data gets pulled. I checked the page source, and the value of the date picker input is being set to "17-NOV-2008", but it somehow isn't reflected in the sql query.
Data does get retrieved if I manually set the date in the date picker, but I'd like it to default to the monday of the current week. What am I doing wrong?
Thanks

nope, still same problem.
I used javascript alerts to help debug, and here might be some useful information.
The computation to set the value of :P42_START_DATE is set to run "before header", but when I put this following javascript in the header:
<script language="javascript">
var c = $v('P42_START_DATE');
alert(c);
</script>
the alert box is blank (ie :P42_START_DATE is empty). Putting the same exact script in the footer gives 24-Nov-2008 in the alert box. Now, the SQL query is run sometime after the first alert and before the second alert, I believe. Why would the value of :P42_START_DATE not be getting set at the correct time?
P42_START_DATE is a date picker item that belongs to the region SCHEDULE (which is where the sql query is). I set the sequence of the region to 10, and the sequence of the date picker and computation to be 5 and 6. Even so, does this mean that the sql query is executing before the call to the computation, because the region needs to be created before any items can be created that belong to the region?

Aperture license does not show owner name

I recently purchased Aperture 3 via the APP store. I noticed that the license information (via About Aperture) does not mention my name. Is this normal ?

Yes

Report License 01A not showing correct data

I have recently installed SCCM 2007 and have a good number of machines with agents installed.
When I run the above report, I get no Office 2003 numbers (though, I know it is installed on most of the machines). I instead get Office 2007 listed. Is it possible that SCCM is reading a key that is for 2007 but we have 2003 installed instead?
Also, in the same report, I am getting 30+ Windows 2008 servers, when we do not have any installed at that location
Any thoughts?

Yes, I know this is an old post, I’m trying to clean them up.
There are a number of Post SP2 AI fixes, I would suggest installed them and seeing if that fixes the problem, if not then you need to contact CSS directly for support as they are the only one that can fix this problem.
http://www.enhansoft.com/

Some tags are not showing in SQL when executing the script as per Date

A) When i am executing below script
Select ToP 10000 [T_idx],[T_Tag], [T_date], [T_counter] from dbo.[total] ORDER BY T_DATE desc
i am able to see all tags with respect to date except some tags prefix with ----PO, this 'PO' tags also present in the same table, with same time and date like other tags
B) When executing below script
Select top 10000 * FROM dbo.[total] where T_Tag like '%PO%' ORDER BY T_DATE DESC
i am able to see all tags related to PO
How i can all tags including 'PO' with one script. can any one help me ??
acmi

Venkat,
Select ToP 10000 [T_idx],[T_Tag], [T_date], [T_counter] from dbo.[total] ORDER BY T_DATE desc
The above query MAY or MAY NOT give the records with taag ---PO as they might belong to a later data which might not fit into the top 10,000 dates of the table. This shud be the problem.
If you want to see all the data irrespective of the number of rows, then below shud help:
Select
[T_idx],[T_Tag], [T_date], [T_counter]
from dbo.[total]
ORDER BY T_DATE desc
If you need the rows that CONTAIN --PO then folowing shud do it:
SELECT
[T_idx],[T_Tag], [T_date], [T_counter]
FROM dbo.[total]
WHERE T_Tag like '%PO%'
ORDER BY T_DATE desc
If you need just the top 10,000 rows of the above result, then just add a TOP clause as below:
SELECT
TOP 10000
[T_idx],[T_Tag], [T_date], [T_counter]
FROM dbo.[total]
WHERE T_Tag like '%PO%'
ORDER BY T_DATE desc
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

Acrobat XI Software License Agreement Not Showing Up

When I open Acrobat, downloaded through the APPS section of the Creative Cloud, the software license agreement box that pops up is blank and doesn't do anything when I press on Accept.

Known issue.
See http://forums.adobe.com/message/4835712

License 06A not showing 2012 SQL

Similar Messages

Maybe you are looking for