License Activation After Installation of an Windows 7 Image

I have a volume license installed on a image that I am deploying to machines in my office.  After installation of the image on the computer I have to reactive the license.  Is this normal procedure of is there someway I can ensure that the license
is activated after deployment so I can skip this step of the setup process?

It is required that license activation occurs on each machine, after Windows is installed on each machine.
Every Windows license is individuated for every machine (a unique CMID is generated).
This is especially important for imaged/cloned machines. Are you using sysprep? Are you performing a rearm prior to image capture?
You can have the activation occur automatically. Are you using MAK or KMS ?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

  • Windows 7 professional backup and restore stop working after installation of acronis true image 2010

    HI,
    windows 7 professional backup and restore stop working after installation of acronis true image 2010. it generates a error code 0x81000019. please help.
    thanks
    Song

    Sankalp,
    I too have the error 0x81000033 when running the full system image backup.  I could not assign a drive letter to my 100mb drive with the Disk Management.  So, I went into the diskpart and ran the following commands:
    diskpart
    list disk
    DISKPART> list par
      Partition ###  Type              Size     Offset
      Partition 1    System             100 MB  1024 KB           ( 78.2 of 96.0MB free )
      Partition 2    Reserved           128 MB   101 MB
      Partition 3    Primary             73 GB   229 MB
      Partition 4    Recovery           423 MB    74 GB
    sel dis 0
    list par
    select partition 1
    assign letter=q
    fsutil usn queryjournal q:
    fsutil usn deletejournal /D q:
    After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free.  Despite that, I ran these commands on the new q: drive:
    C:\Windows\System32>q:
    Q:\>fsutil usn queryjournal q:
    Error:  The parameter is incorrect.
    The FSUTIL utility requires a local NTFS volume.
    Q:\>fsutil usn deletejournal /D q:
    Error:  The parameter is incorrect.
    The FSUTIL utility requires a local NTFS volume.
    Q:\>
    Any help is appreciated.

  • Mac Book Air 13 (october 2013) under Maverick /Flash Player 11 not active after installation

    I live in France and installed Flash Player 11 (last update) on my brand new Book Air.  Several times. Installation apparently succeeds, but it seems that nothing is effectively installed (I checked on the Adobe help site which confirms that). Indeed, I have nothing active and cant't hear audios, read graphics.... on web sites. I have messages saying " module manquant" (missing plug).
    I have checked Safari which correctly admits java and other plugs (security).
    Would my Book air be too weak for Flash Player (I have Intel 1,3 Mgz Core I5 processor). Would an older version of Player then help under Maverick ?
    Thank you !

    How to perform a "clean install" of Flash Player in Mac OS X

  • Corporate license full, after machine upgrade to Windows 7

    Hello,
    We had a computer upgraded from Windows XP to Windows 7. (Physicallty it stayed the same)
    But we did not deactivate the license before removing XP, how can we deactivate this now?
    Have called to local number, have been on the chat but found no way to deal with my problem.
    As we have a user that eneds Adobe Illustrator and now can only use a trail of 30 days.
    Is there no way to remove the machine from the key, and if so how.
    *was forwarded here from an other section*
    Kind regards,
    Michel

    After sending yet another message no response again, is there nothing we can do about this?
    -Been on the Phone
    -Chat
    -Forums
    -Send a private Message (which does not turn up anywhere in the system)
    -Send a direct e-mail
    What more do i need to do to get some help, it has been 3 weeks now.
    I try to be patient and wait for a response but this is not good as in a few days the trail will run out and the program can not be start anymore.

  • Keyboard inoperable after installation of BootCamp & PC image

    I've reinstalled the OS, then used the BootCamp Assistant for my pc partition. I then copy my XP image onto the new partition. Once I boot into the PC side and the login window appears, I've discovered the keyboard is not responding. Keyboard is dead. Mouse is operable. Not sure how I can add a driver if the system won't let me in. Any suggestions? Please help.

    I'd try using a USB keyboard to see if that works.
    ~Lyssa

  • Can't open oracle functions after installation R12 On windows 2008 64 bit

    Hi guys
    i am installed oracle R12.1.1 on windows server 2008 R2 64 bit,then the application is opening but all oracle forms functions can't open,the message appear frm-92101 ,i am try the solutions in net but no effect,and i am getting another message from windows that and this appear when try to open another oracle functions
    aprogram running on this computer is trying to display a message ,then
    message title:
    E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin\java "-serv
    This problem accours when a program is not fully compatible with windows
    This message appear when starting windows also but the java path inside oracle apps files,please help me if oracle r12.1.1 compatible with win 2008 64 bit or not???

    os :WINDOWS SERVER 2008-32 BIT,explorer: IE 7,
    FRM-92101: There was a failure in the Forms Server during startup. This could happened due to invalid configruation. Please look into the web-server log file for details.
    Details...
    Java Exception:
    oracle.forms.net.ConnectionException: Forms session (1) aborted: unable to communicate with runtime process
    at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
    at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
    at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
    at oracle.forms.net.HTTPNStream.flush(Unknown Source)
    at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
    at java.io.DataOutputStream.flush(Unkown Source)
    at oracle.forms.net.HTTPConnection.connet(Unknown Source)
    at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
    at oracle.forms.egnine.FormsDispatcher.init(Unknown Source)
    at oracle.forms.egnine.Runform.initConnection(Unknown Source)
    at oracle.forms.egnine.Runform.startRunform(Unknown Source)
    at oracle.forms.egnine.Main.createRunform(Unknown Source)
    at oracle.forms.egnine.Main.start(Unknown Source)
    at sun.plugin2Applet.Panel.Plugin2Manager$.AppletExcecutionRunnable.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)

  • Problems with System Update 3.14.0019 after installation SP2

    Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
     After this upgrade I view  this error: "An error occurred while gathering user information."
    Thanks for the help

    A known issue.  It wasn't supposed to be supported until SP2 is RTM.  However, look at the stickied post in the forum for some bad news about SU.
    x61s

  • Windows Server 2008 R2 Std Evaluation Copy showing 'License Expiry' message in just 2 weeks after installation

    I have downloaded an 'Evaluation' version of Win Server 2008 R2 Std.
    just 2 weeks back. This is a 180
    days evaluation copy. This has been installed on the Virtual box.
    Now after just 2 weeks, it is showing the message  - 'Windows License is expired'. It is getting automatically
    shutting down (that
    too an abrupt shutdown) after every hour or so without asking to save any work that is already in progress. As this is an 180 days' copy it should run at least for 180 days. Can anyone help me out to get this fixed? Thanks in advance.
    Regards,
    Nilesh

    Hi Nilesh,
    Just addition. Please also refer to following similar thread and check if can help you.
    Windows
    Server 2008 Trial Version License expired after 15 days
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu

  • License keys after imaging

    I have to deploy an image on nearly 100 computers, the image is Win7 x64 Pro. The image that is on the current test PC was taking about 4 months ago and deployed to those same computers. Now there have been upgrades and changes to that image on the test
    PC creating a new one image to be deployed to those . Office was already installed on the syspreped image before, and it is the same again. That image was installed on locally (they were not on a domain) and all that was done after the installation of the
    image was just open Word and go through the activation steps. All of the computers would be using the same license key and everything- just like the image on there currently. So we use volume licensing for Office 2010 and I was told that I would need to delete
    Office off of each computer before installing the new image because of licensing limitations. The belief is that if you create an image and install it on top of another image already there (without uninstalling office) then basically the license key would
    be used twice. Does office need to be completely deleted before I install a new image? I don't want to use 200 license keys for 100 computers. If I do install over top of the existing installation, with no hardware changes, with the new image will it over
    ride the currently installed key and replace it? I need to know before I deploy the new images. Thank you in advance as your knowledge is appreciated!!

    Hi Aron,
    I would have to completely uninstall and re-install SQL Anywhere 16. Is that correct?
    No, you don't have to do this in SQL Anywhere 16 - you can change SQL Anywhere editions by changing the license key on the accompanying server executable license file (e.g. dbsrv16.lic) with the Server Licensing Utility (dblic). You can use the "-k" switch in order to specify a new key:
    dblic -k <reg_key> dbsrv16.lic
    Regards,
    Jeff Albion
    SAP Active Global Support

  • While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

    Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
    == Today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Activating PSE 4.0 After Installation

    Hi, I'm trying to package Photoshop Elements 4.0 to be pushed out with Microsoft SCCM but don't want to activate it until after installation.  Is there any way to skip activation until the first time PSE is run?
    Any help would be greatly appreciated.

    The above should have said like pse8 and pse 9 use.
    I believe there were two versions of pse 4 for windows, one was the try and buy version
    that you would get if one downloaded pse 4 from adobe and the other was the cd
    version, which doesn't have a trial period, so i'm guessing there's not a way to install
    without a serial number or delay putting the serial number in until after installation.
    You can still download the try and buy version, but i couldn't tell you whether or
    not it would accept your serial number.
    MTSTUNER

  • Installing Sybase SQL Anywhere license keys after initial installation.

    Hi,
    I installed Sybase SQL Anywhere 16 before I actually received the valid License Key. So during the installation I've used the license key provided by the instructions.  Afterwards, I've received the purchase license key.  Do i need to reinstall SQL Anywhere all over?  Or can it just continue to function on that license key?  From what i understand, I can not change the license key after the installation was complete.  I would have to completely uninstall and re-install SQL Anywhere 16. Is that correct?
    Thanks
    Aron

    Hi Aron,
    I would have to completely uninstall and re-install SQL Anywhere 16. Is that correct?
    No, you don't have to do this in SQL Anywhere 16 - you can change SQL Anywhere editions by changing the license key on the accompanying server executable license file (e.g. dbsrv16.lic) with the Server Licensing Utility (dblic). You can use the "-k" switch in order to specify a new key:
    dblic -k <reg_key> dbsrv16.lic
    Regards,
    Jeff Albion
    SAP Active Global Support

  • The product key entered does not match any of the Windows images available for installation. Enter a different product key.

    how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "

    That's a really helpful answer and not smug at all, thanks Carey.
    I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
    Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
    a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
    Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
    edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
    http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

  • I can't get imovie to open after trying to shift the image to my TV by clicking fn F3.  If I hold the mouse on the imovie icon for a few seconds the imovie window opens but if I click anywhere on the window it disappears

    I can't get imovie to open after trying to shift the image from my macbook pro to the tv screen like I have done many times before.  If I double click on the imovie icon, imovie doesn't open, but the strip across the top shows iMovie, file, edit , clip, view, text share window help tabs across the top.  The iMovie window will appear if I click on the iMovie icon on the dock for a few seconds, or if I do control F3 at the same time, but when I click on the window it disappears.  When I hover the mouse over the iMovie window that appears the window has a blue border around it.  when I move the mouse outside the iMovie window the blue border goes away.  If I sweep 4 fingers from the top of the screen down, the screen dims a little but the iMovie window doesn't appear. If I click play under the view tab I can hear audio, but still no iMovie window.  It's as if the window is being blocked by the desk top somehow.

    Similar issues here.
    I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

  • HT4623 Hi,        There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be ac

    Hi,
        There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
    after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.

    That is usually a symptom thet the phone was hacked or jailbroken. Was it?

Maybe you are looking for

  • Question regarding generics and collections

    Hi, I am stuying the Sierra and Bates book for SCJP. One particular answer to a question in it is puzzling me at the moment: Given a method as public static <E extends Number> List<E> process(List<E> nums) A programmer wants to use this method like t

  • Server side include problem in DW design mode

    I am having issues with one computer out of three...Using DW 8 on Mac OS 10.4 Intel.... I have a server-side include set up to contain my navigation (nav.shtml) inside of a DW template, and normally, the editable regions can be worked in and the SSI

  • Binary word control?

    I've come across this more than one time, so I thought I'd ask if there was a simple way to do it. I have old test software that used binary word inputs in the procedures to access memory registers, input control words, etc. for processor based opera

  • N8 using bookmarks on shortcuts widget

    HI, you can on the homescreen use the widget to put 4 links too applications or bookmarks or folders.  Now i encountered the problem that i wanted to put in 4 bookmarks on in that widget. But the problem is it shows exactly the same icon for every bo

  • Photo Stream on iPhone 5.

    My dad, brother, and I share my apple ID and we all have the iCloud thing. And if there are photos and I delete all of them, will the photos delete on their devices too?