License check error in sap solution manager

Hi All
I m planing to configure sap solution manager.bt when i ltried to login to sap solution mager with user other than sap* it gives license check error.and whrn i checked in solution with tcode slicense its showing red and validity date is upto 2007.and in command prompt when i checked with command saplicense - show it shows license expired.plzz suggest me what to do now.
Edited by: pranav kumar on Sep 7, 2009 2:19 PM

>>The license is expired.should i reinstall the license or update the license.plz do the needful
This is a forum. We can only suggest you but this doesnot sounds good "plz do the needful"
You need to install a new license. Go to Service marketplace and apply a new license for your system and when you will receive a new license as a text file, then install the license via SLICENSE
Regards,
Subhash

Similar Messages

Error installing SAP Solution Manager 4.0 (SP13) End to End Diagnostic Agen

Hi,
I'm installing SMD Agent on Solaris SPARC 10 64 bits/Oracle. Software version SMDAGENT13_0-20001428.SAR.
The problem appears when I type in the sceen:
SMD Agent User: smdadm
SMD Agent User ID: 8000
SMD Agent Group: sapsys
Pwd SMD Agent: six characters( I've used pwd of different length, but the error follows so I think the problem isn't pwd)
When I type unix command:
>id
uid=0(root) gid=0(root)
The error that appears is:
FSL-01002 Unable to create account user="smdadm" uid="8000". UX: Usr/sbin/useradd: ERROR:Unable to create home directory
Please could you help me?
Thanks

Hi Rahul,
Are you still getting same error? did you solve it? I'm getting the same error. Please help me if you know the solution. I really appreciate your help.
Thanks,
INFO[E]    2008-03-20 15:45:30.484 [syuxcuser.cpp:1932]
           *CSyUserImpl_getOsInfos(ILogBook m_logBook, iastring sName, iastring sID, tSyUserInfo& msUserinfo)
FSH-00006 Return value of function getpwnam(smdadm) is NULL.
ERROR      2008-03-20 15:45:30.727 [syuxcuser.cpp:1704]
           CSyUserImpl::addToOS(const CUserData& data, ISyProgressObserver )*
FSL-01002 Unable to create account user="smdadm". UX: /usr/sbin/useradd: ERROR: Unable to create the home directory: Operation not applicable. (return code 12)

EWA: error message in CRM check for SAP Solution Manager system

Hello!
In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
Queue Name                                Status     Date of first entry             Entries
CSABUPA0000000070           READY     03.12.2007                          45
CSABUPA0000000934           READY     07.05.2008                          45
CSAIBASE0000000000           READY     23.11.2007                          36
CSA_ORDER_8000000000      READY     22.11.2007     5
CSA_ORDER_8000000001      READY     22.11.2007     3
and others.
I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AM

Hi,
Usually problems with hanaging CSA* queues are caused because too many
indiviaual queues are created for the qRFC resources to handle. You can
limit the number of queues as described in note 763680.
Note 763680 would be useful if all of your qRFC resourcesa are in use
when you have a great number of queues. With a large number of dialog
WPs on the system it would probably make sense to reduce the amount
as described in the note.
the casue when you have this problem would be to check SMQR -> GOTO ->
qRFC resources. You can also see if most of your dailog WPs are in use
in SM50.
Also refer to note 758677.
Please schedule report RSQIWKEX (Inbound) to run as described in the
note.
And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
When you replicate lots of data from CRM to R/3, there could be a qRFC
resource problem. In this case, the numebr of queues created can be
reduced by implementing the attached note 356228, particularly solution
2.
For CSA* queues is slightly different from the one decribed in note;
this is because the CSA queues exchange data within the CRM system.
The steps described should be followed, except that table SMOFQFIND
must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
respectively. It should be possible to follow the solution 2 in the
note as long as you use SMOFQFIND instead of CRMQNAMES.
Hope this helps
Cheers,
SH

Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"

I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
Edited by: amirsd on Aug 3, 2011 5:53 PM

Hi,
Please check the below
1) ip/host entries should be in /etc/hosts
2) patch the latest kernel for 2008 R2
and re run installation
Regards,
Ram

Error in Import Java Dump phase while installing SAP solution Manager 7.1

Hi,
While installing SAP solution manager 7.1 I am getting the below error during the phase "Import Java Dump".
An error occurred while processing option SAP Solution Manager 7.1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step : Execution of JLoad tool 'C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx1024m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/sharedlib;D:/usr/sap/SPT/SYS/exe/uc/NTAMD64/mssjdbc/sqljdbc.jar" -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir "D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP" -job "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1. SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/jload.java.log' for more information.
JLOAD.JAVA log details below
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Jload R 7.12 V 0 A 0
Jload -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP -job C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML -log jload.log
Connecting to database
Couldn't connect to DB
com.sap.inst.common.exception.DBConnectionException: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
     at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:157)
     at com.sap.inst.jload.Jload.main(Jload.java:222)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
     at com.sap.inst.common.db.DBConnection.connectViaSecureStore(DBConnection.java:111)
     at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:151)
     ... 6 more
An error occured during execution. Please consult SAP note 942766 for first steps on troubleshooting the problem.
I have gone thru with the notes and it didn't help me much.
I have used J2SDK 1.4.2_17 nad JCE_Policy-1.4.2 files.
Please let me know where IO went wrong.
Thanks in advance.
Sai

Hi,
1. Did you select java path (Export CD/DVD) while intsallation? Check once again.
2. Add JAVA_HOME = Java path in environment variable.
3. What is the exact error, you got it, post error here.
Regards,
Srini Nookala

Error accessing transaction SOLMAN_WORKCENTER in SAP Solution Manager

I get the error below when I try to access workcenters in SAP solution Manager ehp1 via transaction SOLMAN_WORKCENTER
Error while processing your query
What has happened?
The URL call http://sol.test.com:8000/sap/bc/webdynpro/sap/ags_workcenter was terminated because of an error.
Note
The followin error text was processed in smc the systm: Syntax error in program CL_POWL_UTIL==================CP .
The error occurred on the application server sol_smc_00 and in the work process. 0
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_QUERIES of program CL_POWL_QUERY_API=============CP
Method: GET_WORKLISTS of program CL_CONTROL_CENTER_API_FOR_POWLCP
Method: IF_AGS_CONTROL_CENTER_API~GET_WORKLISTS of program CL_AGS_POWL_BASIC=============CP
Method: GET_WORK_LIST of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: IF_COMPONENTCONTROLLER~GET_WORK_LIST of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: HANDLEDEFAULT of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
What can you do?
With the termination type RABAX_STATE you will find in the system smc in transaction ST22 more information on the cause of the termination.
With termination type ABORT_MESSAGE_STATE you will findon the application server sol_smc_00 in transaction SM21 more information on the cause of the termination.
With termination type ERROR_MESSAGE_STATE you can scan for further information in the trace file for the work process 0 in transaction ST11 on the application server. sol_smc_00 It is possible that an analysis of the trace files for the other work processes is necessary.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 001 -u: lolli -l: E -s: smc -i: sol_smc_00 -w: 0 -d: 20110415 -t: 165748 -v: RABAX_STATE -e: SYNTAX_ERROR -X: 00235AB4EF731EE099F78539B74CB1A5_00235AB4EF731EE099F78537687251A5_1 -x: 29BC67E0BACDF16BB1A500235AB4EF73
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
How do I resolve this error?

Hi Mateus,
Thanks for your keen interest in assisting.
This is an excerpt from ST22....even though i am not an ABAP person.
Error in the ABAP Application Program
The current ABAP program "CL_POWL_QUERY_API===========CP" had to be terminated becuase it has come accross a statement that
unfortunately cannot be executed.
The following syntax error occured in program
"CL_POWL_UTIL===========CP" in include
"CL_POWL_UTIL===========CM007" IN
line 48:
"Incorrect logical expression: ")" without preceding "("."
The include has been created and last changed by:
Created by "SAP"
Last changed by: "BODE"
Error in the ABAP Application Program
The currect ABAP Program "CL_POWL_QUERY_API=============CP" had to be terminated becuase it has come accross
a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_POWL_UTIL===========CP".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look at and manag termination messages.
and you can also keep them for a long time.
When i clicked on the ABAP Editor in ST22, I have the code below
method GET_QUERIES.
data: ls_authorities type powl_authorities_sty,
 lt_vistypes type powl_type_tty,
 lt_visqueries type powl_query_tty,
 ls_api_query type powl_query_asty.
field-symbols: <fs_query> type powl_query_sty.
cl_powl_util=>do_authority_checks_for_user(
 exporting
 i_applid = i_applid
 i_user = i_user
 changing
 c_authorities = ls_authorities
lt_vistypes = cl_powl_type_accessor=>get_visible_types(
 i_applid = i_applid
 i_langu = sy-langu
 i_username = i_user
lt_visqueries = cl_powl_query_accessor=>get_visible_queries(
 i_applid = i_applid
 i_authorities = ls_authorities
 i_langu = sy-langu
 i_username = i_user
 i_vistypes = lt_vistypes
loop at lt_visqueries assigning <fs_query>.
 move-corresponding <fs_query> to ls_api_query.
 insert ls_api_query into table result.
endloop.
endmethod.
The cursor is on this line containing the statement below
"cl_powl_util=>do_authority_checks_for_user("

SAP EHP 1 for SAP Solution Manager 7.0 configuration check

Hi All,
I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.

SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
Thanks
SM

Error with install Solution manager on step: check DDIC password.

Iu2019m installing SAP Solution Manager 7.0. ABAP and JAVA instance. OC SLES 10.2. БД Oracle 10.2, update 10.2.0.4. At step 28 out error:
Test logon to SAP System UST failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.
Error of sapinst_dev.6.log
WARNING[E] 2010-07-01 11:30:00.166 [iaxxrfcimp.cpp:433]
           CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE      2010-07-01 11:30:00.167 [iaxxrfcimp.cpp:434]
           CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE      2010-07-01 11:30:00.167 [iaxxrfcimp.cpp:436]
           CAbRfcImpl::openRfcConn
DB-Error -          0
Error of /usr/sap/UST/DVEBMGS03/work/dev_rfc.trc
u2026.
ERROR file opened at 20100701 124301 YEKST, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '10.10.8.240:3303' not reached
I have tried to change password DDIC at 19920706. Error could not be fixed. In the SAP GUI can connect SAP *. When Iu2019m trying to connect DDIC out DB-Error u2013 0.

suse102:/usr/sap/UST/DVEBMGS03/work # cat dev_rfc.trc
ERROR file opened at 20060102 052456 YEKT, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '10.10.8.240:3303' not reached
TIME        Mon Jan 2 05:24:56 2006
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       111
ERRNO TEXT Connection refused
COUNTER     2
T:1115703616 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.UST, GWHOST=suse102, GWSERV=3303
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '10.10.8.240:3303' not reached
TIME        Mon Jan 2 05:24:56 2006
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       111
ERRNO TEXT Connection refused
COUNTER     4
ERROR file opened at 20100706 142541 YEKST, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION    CPIC (TCP/IP) on local host
ERROR       service '/tmp/.sapstream40300' in use
TIME        Tue Jul 6 14:25:41 2010
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -4
MODULE      nixxi.cpp
LINE        3148
DETAIL      NiIBindSocket: could not delete file '/tmp/.sapstream40300'
            for hdl 2
SYSTEM CALL unlink
ERRNO       1
ERRNO TEXT Operation not permitted
COUNTER     4
T:1115703616 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.UST, GWHOST=suse102, GWSERV=3303
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '10.10.8.240:3303' not reached
TIME        Tue Jul 6 14:25:41 2010
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       111
ERRNO TEXT Connection refused
COUNTER     6

Error in installation of Sap Solution Manager - AIX / Oracle

Hello,
We are installing SAP Solution Manager in Operating System is AIX 5.3 and Database System is Oracle 10.2
After the Oracle Installation, in the phase of Abap Import (16 of 44), we are
receiving the follow error message:
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
ERROR 2007-04-12 15:27:41
CJS-30022 Program 'Migration Monitor' exits with error code 2. For
details see log file(s) import_monitor.java.log, import_monitor.log.

The installation export DVD was copied to local machine (the directory
list is attached in zip file). We get this DVD from
service.sap.com/swdc.
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20061222 (ifix 113727: SR7 + 112603) (JIT enabled: jitc))
IMPORT_MONITOR.JAVA shows this message:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20061222 (JIT enabled)
J9VM - 20061220_10521_BHdSMr
JIT - 20061026_1805_r8
GC - 200612_20)
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
And the directory is OK
/oracle/install/51032524
ls -l
total 160
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.ASC
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.EBC
-rwxrwxrwx 1 root system 9093 Apr 12 09:54 COPY_TM.HTM
-rwxrwxrwx 1 root system 5787 Apr 12 09:54 COPY_TM.TXT
-rwxrwxrwx 1 root system 8559 Apr 12 09:54 CRCFILE.DAT
drwxrwxrwx 4 root system 256 Apr 12 10:03 EXP1
drwxrwxrwx 4 root system 256 Apr 12 10:11 EXP2
drwxrwxrwx 4 root system 256 Apr 12 10:14 EXP3
drwxrwxrwx 4 root system 256 Apr 12 10:16 EXP4
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.ASC
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.EBC
-rwxrwxrwx 1 root system 20 Apr 12 09:54 LABELIDX.ASC
-rwxrwxrwx 1 root system 22361 Apr 12 09:54 SHAFILE.DAT
-rwxrwxrwx 1 root system 22 Apr 12 09:54 VERSION.ASC
Please, anybody have any idea?
Thanks for help,
Carlos Nogueira

Hi Carlos, can you resolve this ? because i have the same problem, but with sql and win 2003.
java version "1.4.2_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_15-b02)
Java HotSpot(TM) Client VM (build 1.4.2_15-b02, mixed mode)
Required system resources are missing or not available:
Import directory sapinst\saptrans\D51032007\EXP1' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP2' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP3' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP4' does not exist.
thanks in avance.

Error when installing sap solution manager

Dear all,
When i am installing SAP solution manager (SAP SOLMAN 7.0 EHP1SR1 WINDOWS_X86_64), I meet the following error:
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step: ABAP processes of instance S01/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS.
Do anyone meet the same error before? Please help...
Thanks.

I had a similar issue because the size of the pagiing file, after increase the size of paging file to 20Gb, I solved the issue in my system. The instance wasn't up because the size of paging file.

License for Java stack in SAP Solution Manager

Hello!
I installed SAP Solution Manager (ABAP+Java), have ordered the SAP License and applied the license for ABAP part (Tcode: slicense).
Do I also need to update/license the Java Part of my system in Visual Administration?
(Server 0 0_30826 .. --> Licensing Adapter --> choose Tab "Installed Licenses")
Thank you very much!
regards
Thom

Extract from OSS note 953302
In a double-stack installation, only the license keys in WebAS ABAP is relevant. You do not require a license key for WebAS Java for a double-stack installation.
If a license key was installed in WebAS Java, it does not have an effect on the function of the system. You can ignore warnings about expired or soon to expire license keys in WebAS Java.

Installing SAP solution manager error

Hi all,
I install SAP solution manager on a distributed system with Oracle database. I am installing "database instance" step. I found a error in second step "install common file"of installation. And the log file is
INFO 2009-07-21 18:46:46.454
Removed environment variable SAPDATA_HOME from current process environment.
INFO[E] 2009-07-21 18:46:46.460
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-07-21 18:46:46.530
FCO-00011 The step createDefaultProfile with step key |NW_Doublestack_DB|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createDefaultProfile was executed with status ERROR .
Please help me..
Thanks
Duypm

Hi all,
This is my new logfile
INFO 2009-07-24 14:11:07.403
Removed environment variable DIR_LIBRARY from current process environment.
INFO 2009-07-24 14:11:07.403
Removed environment variable THREAD from current process environment.
INFO 2009-07-24 14:11:07.403
Removed environment variable dbms_type from current process environment.
INFO 2009-07-24 14:11:07.404
Removed environment variable dbs_ora_tnsname from current process environment.
INFO 2009-07-24 14:11:07.404
Removed environment variable dbs_ora_schema from current process environment.
INFO 2009-07-24 14:11:07.404
Removed environment variable ORACLE_SID from current process environment.
INFO 2009-07-24 14:11:07.405
Removed environment variable DB_SID from current process environment.
INFO 2009-07-24 14:11:07.405
Removed environment variable ORACLE_BASE from current process environment.
INFO 2009-07-24 14:11:07.405
Removed environment variable TNS_ADMIN from current process environment.
INFO 2009-07-24 14:11:07.406
Removed environment variable NLS_LANG from current process environment.
INFO 2009-07-24 14:11:07.406
Removed environment variable SAPDATA_HOME from current process environment.
ERROR 2009-07-24 14:11:07.413
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-07-24 14:11:07.475
FCO-00011 The step createDefaultProfile with step key |NW_Doublestack_DB|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createDefaultProfile was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
Please help me....
Thanks
Duypm

Authorization check For Test plan in SAP Solution Manager test management

Hi experts,
I need to allow only selected user to view their test package and the list of transaction so i need to have a authorization check by using enhancement i got struck since i am not able to find any badi for this ..kindly looking back your suggestion

Hi Namrata,
Yes, you can create project structure before using solar01 tcode. later once your test cases (either manual or automatic) are ready then you can upload them using solar02 on test cases tab,
refer Link Test Case to Transactions/Reports - Configuration - SAP Library
Assignments - SAP Solution Manager - SAP Library
Thanks
Jansi

Error while installing SOLUTION MANAGER 7.0 EHP 1

Hi Experts.
I face this problem while installing SOLMAN 7.0 EHP1 for MAXDB on Windows 2003 . DO you have any idea what happens with my installation?*
*(Before installing this, I have more than 80GB hard disk and 4Gb RAM on Server)*An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > MaxDB > Central System > Central System( Last error reported by the step: Execution of JLoad tool 'C:\j2sdk1.4.2\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ADA\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/install/sharedlib/jload.jar;C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/install/sharedlib/antlr.jar;C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/install/sharedlib/exception.jar;C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/install/sharedlib/jddi.jar;C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/install/sharedlib/logging.jar;C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/install/sharedlib/offlineconfiguration.jar;C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/install/sharedlib/opensqlsta.jar;C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar;C:\sapdb\programs\runtime\jar\sapdbc.jar" -sec TST,jdbc/pool/TST,
SAPDEMO/sapmnt/TST/SYS/global/security/data/SecStore.properties,
SAPDEMO/sapmnt/TST/SYS/global/security/data/SecStore.key -dataDir "C:\Documents and Settings\Administrator\Desktop\SOLMAN\SOLMAN JAVA Component\51040439\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP" -job "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ADA\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1. SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/jload.java.log' for more information.
Once I went and check jload.java.log and jload.log, there's something relate to space disk. Here are the log for the 2 files:
Jun 8, 2011 10:21:42 AM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
Jun 8, 2011 10:21:42 AM com.sap.inst.jload.Jload logStackTrace
SEVERE: com.sap.dbtech.jdbc.exceptions.DatabaseException: [-907]: Space for user session exhausted
 at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:65)
 at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:1061)
 at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:689)
 at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:563)
 at com.sap.dbtech.util.security.AuthenticationManager.<init>(AuthenticationManager.java:78)
 at com.sap.dbtech.jdbc.ConnectionSapDB.doConnect(ConnectionSapDB.java:405)
 at com.sap.dbtech.jdbc.ConnectionSapDB.<init>(ConnectionSapDB.java:136)
 at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:246)
 at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
 at com.sap.inst.jload.db.DBConnection.connectViaSecureStore(DBConnection.java:105)
 at com.sap.inst.jload.db.DBConnection.connect(DBConnection.java:149)
 at com.sap.inst.jload.Jload.main(Jload.java:583)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:331)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
And this's jload.log:
8.06.11 10:21:42 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
08.06.11 10:21:42 com.sap.inst.jload.Jload logStackTrace
SEVERE: com.sap.dbtech.jdbc.exceptions.DatabaseException: [-907]: Space for user session exhausted
 at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:65)
 at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:1061)
 at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:689)
 at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:563)
 at com.sap.dbtech.util.security.AuthenticationManager.<init>(AuthenticationManager.java:78)
 at com.sap.dbtech.jdbc.ConnectionSapDB.doConnect(ConnectionSapDB.java:405)
 at com.sap.dbtech.jdbc.ConnectionSapDB.<init>(ConnectionSapDB.java:136)
 at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:246)
 at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
 at com.sap.inst.jload.db.DBConnection.connectViaSecureStore(DBConnection.java:105)
 at com.sap.inst.jload.db.DBConnection.connect(DBConnection.java:149)
 at com.sap.inst.jload.Jload.main(Jload.java:583)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:331)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Edited by: Bui Tony on Jun 8, 2011 5:06 AM

> I face this problem while installing SOLMAN 7.0 EHP1 for MAXDB on Windows 2003 . DO you have any idea what happens with my installation?*
I HIGHLY recommend not using a 32bit operating system for Solution Manager, you will run into lots of problems and issues concerning memory usage and limitations of the 32bit platform.> 08.06.11 10:21:42 com.sap.inst.jload.Jload logStackTrace
> SEVERE: com.sap.dbtech.jdbc.exceptions.DatabaseException: [-907]: Space for user session exhausted
It seems that the maximum memory on 32bit is reached already. Decrase the CACHESIZE of the database, restart the database and press "retry" in sapinst.
This will not be the only problem you will get, use a 64bit server and at least 8 GB memory for Solution Manager.
Markus

Error on install Solution Manager : Jcmon(error 4). No space left on device

Hi
I am having a problem installing Solution Manager 7.0 EHP1- AIX 6.1 DB2 9.7
During the unpacking phase error:
FCO-00011 The step unpack with step key was executed with status ERROR (Last error Reported by the step: Execution of the command "/ tmp/sapinst_exe.4325530.1325543592/SAPCAR-x-v-i-r / usr / sap / SMG / SYS / exe / run-f / MidiasInstall / IMKernel/DATA_UNITS/K_701_U_AIX_PPC64/DBINDEP/SAPEXE.SAR, "finished with return code 4. Output
<html> <head> </ head> <body> An error occurred while processing option EhP1 SAP Solution Manager 7.0> SAP Systems> IBM DB2 for Linux, UNIX, and Windows> Central System> Central System (Reported by the last step error: Execution of the command "/ tmp/sapinst_exe.4325530.1325543592/SAPCAR-x-v-i-r / usr / sap / SMG / SYS / exe / run-f / MidiasInstall/IMKernel/DATA_UNITS/K_701_U_AIX_PPC64 / DBINDEP / SAPEXE.SAR, "finished with return code 4. Output:
Sapce: processing archive / MidiasInstall/IMKernel/DATA_UNITS/K_701_U_AIX_PPC64/DBINDEP/SAPEXE.SAR (version 2.01)
x jcmon
Sapce: error writing to / usr / sap / SMG / SYS / exe / run / jcmon (error 4). No space left on device).
Note: I downloaded the newest sapinst but not resolved.
SAPinst build information:
abi version: 722
make variant: 720_REL
build: 1296039
compile time: 26 Dec 2011 02:46:25
Media used:
51041320 - DB2 9.7 - Client
51041317_1 DB2 9.7 - RDBMS
51040438 - Export
51040437 - Installation Master
51040439 - Java SW Comp
51040584 - Kernel
Filesystem GB blocks Free% Used Iused% Iused Mounted on
/ dev/hd2 5:00 49 709 2.76 45% 8% / usr
/ dev/fslv00 15:00 15:00 15 1% 1% / usr / sap / SMG
any idea ?

Hi,
The /usr/sap file system looks fine.
Could you also check the file space on the /tmp file system? This is usually less and SAPInst can fill this up very quickly.
Ideal to create a seperate SAPInst directory rather than use the default /tmp/sapinst_instdir.
Regards,
Srikishan

License check error in sap solution manager

Similar Messages

Maybe you are looking for