License definitions ...

Guys,
I have spent nearly two hours trying to find out what the difference is between, Student, Education and Commercial.
A reseller in NZ is saying that I can use an Education license for commercial purposes without academic proof. This doesn't sound right to me, there has to be a restriction.
You would think that this information would be blindingly obvious but I can not find it anywhere here.
Some posts say that it doesn't come with Font Software ... some posts say that it means there is no upgrade path. I could live without either of them if I can have it for commercial use.
Does anyone know for sure? Can anyone link to an Adobe article that details there.
Cheers Dave

I only know the rules in North America but they are as follows:
Student: Heavily discounted and usually sold directly through the
school. Once the software is received you must contact Adobe for a
serial number. Must be eligible to purchase. NO COMMERCIAL USE ALLOWED.
Academic: Steep discount but not as much as the student version. Must be
an eligible student or teacher to purchase. COMMERCIAL USE ALLOWED. Full
upgrade rights to commercial versions if academic eligibility ends.
Bob

Similar Messages

  • CPU license definition

    Hi there,
    Is it possible to do CMS clustering with CPU license*1 ?
    If not, is it possible to add report servers to multiple machine with CPU license*1?
    Thanks,
    Chris

    I don't think clustering and adding report servers are a function of the CPU license, if using crystal reports server of business objects edge then you cannot cluster. If using Business Objects Enterprise then it should be supported if the CMS's are on machines with only 1 CPU (or more based on the license) for more details on the ins and outs you will need to talk to your account rep about the CPU license.
    Regards,
    Tim

  • Please clarify the following license issue

    Hello
    Please clarify the following license issue
    Oracle 10g se license requirement while using a power 6 P520 machine with 2-core 4.2 GHz processor card,4 memory DIMM slots. Are we entitled for paying for one oracle 10g SE license?
    many thanks in advance

    When you read through that thread, did you see where I linked to and quoted the licensing definitions
    Processor: shall be defined as all processors where the Oracle programs are installed and/or running. Programs licensed on a processor basis may be accessed by your internal users (including agents and contractors) and by your third party users. For the purpose of counting the number of processors which require licensing for a Sun UltraSPARC T1 processor with 4, 6 or 8 cores at 1.0 gigahertz or 8 cores at 1.2 gigahertz for only those servers specified on the Sun Server Table which can be accessed at http://oracle.com/contracts , “n” cores shall be determined by multiplying the total number of cores by a factor of .25. For the purposes of counting the number of processors which require licensing for AMD and Intel multicore chips, “n” cores shall be determined by multiplying the total number of cores by a factor of .50. For the purposes of counting the number of processors which require licensing for all hardware platforms not otherwise specified in this section, a multicore chip with "n" cores shall be determined by multiplying "n" cores by a factor of .75. All cores on all multicore chips for each licensed program for each factor listed below are to be aggregated before multiplying by the appropriate factor and all fractions of a number are to be rounded up to the next whole number. When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket.
    It appears that you fall under the "not otherwise specified" category because you're not dealing with an UltraSPARC T1 (multiplier 0.25) or an AMD/ Intel chip (multiplier 0.5) so your multiplier would be 0.75.
    0.75 * 2 cores = 1.5 processors which would have to be rounded up to 2 processors. If you had 4 total cores, you would only need a 3 processor license.
    Justin

  • Active Data Guard Licensing

    I have no idea where to ask this question and if I'm asking in the wrong forum I'd appreciate it if someone can direct me to the right one.
    I have a physical standby server and I'd like add the Active Data Guard option to it to offload ETL processing. If I want to use named user plus licensing, how many named users to I need to pay for? There is only 1 server, 1 process, and 1 user that will be pulling data from this standby server into a SQL Server landing store database. Eventually the data will make it into a data warehouse (also SQL Server), SQL Server Reporting Services, and SQL Server Analysis Services. Between SSAS and SSRS there might be 100 distinct users on the front end, but they are all several levels removed from the standby server.
    So the question is how many named users do I need to buy? The definition of "named user plus" in the licensing definitions is about as clear mud. I think I only need 1. But it could be 25 based on minimum # of users for EE. And it could be 100 if every user of SSRS and SSAS is counted individually.
    I'm trying to avoid doing processor based licensing which is equally unclear but on initial impression seems to be much more expensive. The standby server in question has 2 dual core intel xeon processors, running on Windows 2008 R2. The version of Oracle is 11GR2 Enterprise Edition. If I've done the math right, processor licensing comes out to 23k.

    Hello;
    Active Data Guard does need a license and you are in the correct forum. But only your Oracle salesperson can answer this question.
    Was at Cloud Control class last month and several DBA's there thought everyone has a similar license agreement. Not true. So somebody here might guess at your answer, but in the end only Oracle's answer will count.
    Best Regards
    mseberg

  • Error During Installation of CE 7.1 SP1 Preview

    Hello,
    I've got problems installing Composition Environment 7.1 SP1 preview.
    Can anyone help?
    Kind regards
    Stefan
    Please see the log file:
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[1.5.7.1006]/>
    <!NAME[D:\usr\sap\CE1\insthome\primaryApplicationServer\work\install.log]/>
    <!PATTERN[install.log]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jul 16, 2007 11:28:53 AM [Info]: logfile is: D:\usr\sap\CE1\insthome\primaryApplicationServer\work/install.log
    Jul 16, 2007 11:28:53 AM [Info]: init controller started
    Jul 16, 2007 11:28:53 AM [Info]: variable file is: D:/usr/sap/CE1/insthome/primaryApplicationServer/INSTVARSRT.xml
    Jul 16, 2007 11:28:53 AM [Info]: steps file is: D:/usr/sap/CE1/insthome/primaryApplicationServer/steps.xml
    Jul 16, 2007 11:28:53 AM [Info]: my first task is to change to my working directory
    Jul 16, 2007 11:28:54 AM [Info]: my old working directory was C:\Dokumente und Einstellungen\swalter\Lokale Einstellungen\Temp\I1184578015\Windows, I will change back later
    Jul 16, 2007 11:28:54 AM [Info]: my new working directory is D:/usr/sap/CE1/insthome/primaryApplicationServer/work
    Jul 16, 2007 11:28:54 AM [Info]: TEST FILE C:\Dokumente und Einstellungen\swalter\Lokale Einstellungen\Temp\I1184578015\Windows\test
    Jul 16, 2007 11:28:54 AM [Info]: lib (DIR/LIB)directory is: D:/usr/sap/CE1/insthome/primaryApplicationServer/lib
    Jul 16, 2007 11:28:54 AM [Info]: step (DIR/STEPS) directory is: D:/usr/sap/CE1/insthome/primaryApplicationServer/steps
    Jul 16, 2007 11:28:54 AM [Info]: loading bootstrap xml: /com/sap/xpf/tasklib/win_bootstrap.xml
    Jul 16, 2007 11:28:54 AM [Info]: Adding to classpath: D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\fso.jar
    Jul 16, 2007 11:28:54 AM [Info]: loading ... D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\fso.jar
    Jul 16, 2007 11:28:54 AM [Info]: read ... C:\Dokumente und Einstellungen\swalter\Lokale Einstellungen\Temp\I1184578015\Windows\fso.xml
    Jul 16, 2007 11:28:54 AM [Info]: -
    TaskLibrary: fso
         description: This tasklibrary is for file system operation
              Task: extractArchive
                   description: extract and archive, nomatter what kind of archive (zip, jar, sar, ...)
                   definition(indep): com.sap.fso.extractArchive.xml
                   Paramter: ARCHIVE
                        description: the archive
                   Paramter: TARGET_DIR
                        description: the target directory
              Task: extractZipArchive
                   description: extract and archive, nomatter what kind of archive (zip, jar, sar, ...)
                   definition(indep): com.sap.fso.ExtractZipArchiveCommaList
                   Paramter: ARCHIVELIST
                        description: comma seperated zip arhcive list
                   Paramter: TARGET_DIR
                        description: the target directory
              Task: copyFile
                   description: copy a file to a target dorectory, if director not exists the directory will be created
                   definition(indep): com.sap.fso.copyFile.xml
                   Paramter: SOURCE
                        description: the surce file
                   Paramter: DIRECTORY/DESTINATION
                        description: the destination directory
                   Paramter: FILE/DESTINATION
                        description: the destination file
                   Paramter: MACROPROCESSING
                        description: with or without macroprocessing
                        defaultValue: false
              Task: deleteFile
                   description: deletes the file
                   definition(indep): com.sap.fso.deleteFile.xml
                   Paramter: FILENAME
                        description: the file to delete
              Task: deleteDirectory
                   description: deletes the directory
                   definition(indep): com.sap.fso.deleteDirectory.xml
                   Paramter: DIRECTORY/NAME
                        description: the directory to delete
              Task: deleteNode
                   description: delete a node
                   definition(indep): com.sap.fso.DeleteOrVersionizeNode
                   Paramter: node
                        description: the node name
                   Paramter: saveVersion
                        description: save a version of the node prior to deleting it
                        defaultValue: false
                   Paramter: breakOnError
                        description: abort in case of an error
                        defaultValue: false
              Task: createDirectory
                   description: creates a directory
                   definition(indep): com.sap.fso.createDirectory.xml
                   Paramter: DIRECTORY/NAME
                        description: cerates a directory
              Task: moveDirectory
                   description: moves a directory
                   definition(indep): com.sap.fso.moveDirectory.xml
                   Paramter: DIRECTORY/SOURCE/NAME
                        description: source directory
                   Paramter: DIRECTORY/TARGET/NAME
                        description: target directory
              Task: copyDirectory
                   description: moves a directory
                   definition(indep): com.sap.fso.copyDirectoy.xml
                   Paramter: DIRECTORY/SOURCE
                        description: source directory
                   Paramter: DIRECTORY/TARGET
                        description: target directory
              Task: copyDirectoryToDifferentDirectory
                   description: copy a directory to a different directory
                   definition(indep): com.sap.fso.CopyDirectoyToDifferentDirectory
                   Paramter: DIRECTORY/SOURCE
                        description: source directory
                   Paramter: DIRECTORY/TARGET
                        description: target directory
              Task: setFSPermissions
                   description: sets the file system permissions
                   definition(indep): com.sap.fso.unx.SetFSPermissions
                   Paramter: mod
                        description: the mod of the permissions
                   Paramter: node
                        description: the node to change (file or directory)
                   Paramter: recursive
                        description: recursive
                        defaultValue: false
                   Paramter: user
                        description: the new owner
                   Paramter: group
                        description: the new owner group
                   Paramter: followLinks
                        description: on unix you can follow links, default is false
                        defaultValue: false
              Task: setACLWin
                   description: sets the acls
                   definition(WIN): com.sap.fso.win.SetACLWin
                   Paramter: node
                        description: the node to change (file or directory)
                   Paramter: group
                        description: the group
                   Paramter: permission
                        description: FC,FCE,RW,RWE
              Task: createLink
                   description: create a link
                   definition(UNX): com.sap.fso.unx.CreateLink
                   definition(WIN): com.sap.fso.win.CreateLink
                   Paramter: linkPath
                        description: the path of the link
                   Paramter: targetPath
                        description: the name of the path where the link points to
              Task: createShare
                   description: creates a share
                   definition(WIN): com.sap.fso.win.CreateShare
                   Paramter: shareName
                        description: the name of the share
                   Paramter: targetPath
                        description: the name of the path where the share points to
                   Paramter: description
                        description: the description
                        defaultValue: share $(shareName) points to $(targetPath)
    Jul 16, 2007 11:28:54 AM [Info]: add task: extractArchive
    Jul 16, 2007 11:28:54 AM [Info]: add task: extractZipArchive
    Jul 16, 2007 11:28:54 AM [Info]: add task: copyFile
    Jul 16, 2007 11:28:54 AM [Info]: add task: deleteFile
    Jul 16, 2007 11:28:54 AM [Info]: add task: deleteDirectory
    Jul 16, 2007 11:28:54 AM [Info]: add task: deleteNode
    Jul 16, 2007 11:28:54 AM [Info]: add task: createDirectory
    Jul 16, 2007 11:28:54 AM [Info]: add task: moveDirectory
    Jul 16, 2007 11:28:54 AM [Info]: add task: copyDirectory
    Jul 16, 2007 11:28:54 AM [Info]: add task: copyDirectoryToDifferentDirectory
    Jul 16, 2007 11:28:54 AM [Info]: add task: setFSPermissions
    Jul 16, 2007 11:28:54 AM [Info]: add task: setACLWin
    Jul 16, 2007 11:28:54 AM [Info]: add task: createLink
    Jul 16, 2007 11:28:54 AM [Info]: add task: createShare
    Jul 16, 2007 11:28:54 AM [Info]: loaded
    Jul 16, 2007 11:28:54 AM [Info]: Adding to classpath: D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\initialconfig.jar
    Jul 16, 2007 11:28:55 AM [Info]: loading ... D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\initialconfig.jar
    Jul 16, 2007 11:28:55 AM [Info]: read ... C:\Dokumente und Einstellungen\swalter\Lokale Einstellungen\Temp\I1184578015\Windows\initialconfig.xml
    Jul 16, 2007 11:28:55 AM [Info]: -
    TaskLibrary: initialconfig
         description: This tasklibrary is for initial config
              Task: configureUME
                   description: configures the UME
                   definition(indep): com.sap.initialconfig.configureUME.xml
                   Paramter: DIR/WORKINGDIR
                        description: working directory
                   Paramter: JEEINSTALL/LIB
                        description: jee install libs
                   Paramter: USERNAME/ADMIN
                        description: name of the admin user
                        defaultValue: Administrator
                   Paramter: PWD/ADMIN
                        description: password of the admin user
                   Paramter: USERNAME/GUEST
                        description: name of the guest user
                        defaultValue: Guest
                   Paramter: PWD/GUEST
                        description: password of the guest user
                   Paramter: GROUP/ADMIN
                        description: name of the admin group
                        defaultValue: Administrators
                   Paramter: GROUP/GUEST
                        description: name of the guest group
                        defaultValue: Guests
                   Paramter: GROUP/ALL
                        description: name of the all group
                        defaultValue: Everyone
                   Paramter: UME/PROPERTIES
                        description: ume properties file
              Task: installFirstTempLicense
                   description: installs the first temprary license
                   definition(indep): com.sap.initialconfig.installFirstTempLicense.xml
                   Paramter: DIR/WORKINGDIR
                        description: working directory
                   Paramter: JEEINSTALL/LIB
                        description: jee install libs
                   Paramter: DB/JDBC_PATH
                        description: path to the jdbc driver
                   Paramter: LIC/PROPS
                        description: lic.properties
              Task: JLoadImport
                   description: import the jload dump file
                   definition(indep): com.sap.initialconfig.JLoadImport.xml
                   Paramter: DIR/WORKINGDIR
                        description: working directory
                   Paramter: JEEINSTALL/LIB
                        description: jee install libs
                   Paramter: DB/JDBC_PATH
                        description: path to the jdbc driver
                   Paramter: FILE/SECURESTORE
                        description: secure store file
                   Paramter: FILE/SECURESTOREKEY
                        description: secure store key
                   Paramter: SID
                        description: the name of the sid
                   Paramter: DIR/JLOAD
                        description: path to the jload import.xml + jload dump file
              Task: runBatchInstall
                   description: run the batch install tool
                   definition(indep): com.sap.initialconfig.runBatchInstall.xml
                   Paramter: DIR/WORKINGDIR
                        description: working directory
                   Paramter: JEEINSTALL/LIB
                        description: jee install libs
                   Paramter: DB/JDBC_PATH
                        description: the jdbc driver
                   Paramter: BATCHINSTALL/PROP
                        description: path to the batch install properties
              Task: runBatchConfig
                   description: run the batch config tool
                   definition(WIN): com.sap.initialconfig.win.runBatchConfig.xml
                   definition(UNX): com.sap.initialconfig.unx.runBatchConfig.xml
                   Paramter: DIR/WORKINGDIR
                        description: working directory
                   Paramter: JEEINSTALL/LIB
                        description: jee install libs
                   Paramter: DB/JDBC_PATH
                        description: the jdbc driver
                   Paramter: BATCHCONFIG/PROP
                        description: path to the batch config properties
              Task: runBatchUninstall
                   description: run the batch config tool
                   definition(WIN): com.sap.initialconfig.win.runBatchUninstall.xml
                   definition(UNX): com.sap.initialconfig.unx.runBatchUninstall.xml
                   Paramter: DIR/WORKINGDIR
                        description: working directory
                   Paramter: JEEINSTALL/LIB
                        description: jee install libs
                   Paramter: DB/JDBC_PATH
                        description: the jdbc driver
                   Paramter: BATCHUNINSTALL/PROP
                        description: path to the batch config properties
              Task: secureStorePropsCreate
                   description: import the jload dump file
                   definition(indep): com.sap.initialconfig.secureStorePropsCreate.xml
                   Paramter: DIR/WORKINGDIR
                        description: working directory
                   Paramter: JEEINSTALL/LIB
                        description: jee install libs
                   Paramter: SID
                        description: the name of the sid
                   Paramter: FILE/SECURESTORE
                        description: secure store file
                   Paramter: FILE/SECURESTOREKEY
                        description: secure store key
                   Paramter: KEYPHRASE
                        description: the keyphrase
              Task: secureStoreFSAddDBEntries
                   description: import the jload dump file
                   definition(indep): com.sap.initialconfig.secureStoreFSAddDBEntries.xml
                   Paramter: DIR/WORKINGDIR
                        description: working directory
                   Paramter: JEEINSTALL/LIB
                        description: jee install libs
                   Paramter: SID
                        description: the name of the sid
                   Paramter: FILE/SECURESTORE
                        description: secure store file
                   Paramter: FILE/SECURESTOREKEY
                        description: secure store key
                   Paramter: DB/DRIVER_CLASS_NAME
                        description: jdbc driver class name
                   Paramter: DB/CONNECT_URL
                        description: jdbc url connection string
                   Paramter: DB/PASSWORD
                        description: db password
              Task: CreateIcmonAuthenticationFile
                   description: creates the icmon authentication file, if it already exists it will be overwritten
                   definition(indep): com.sap.initialconfig.CreateIcmonAuthenticationFile
                   Paramter: adminUser
                        description: the admin user, default is webadm
                        defaultValue: webadm
                   Paramter: password
                        description: the password
                   Paramter: securityDataPath
                        description: the security data path
    Jul 16, 2007 11:28:55 AM [Info]: add task: configureUME
    Jul 16, 2007 11:28:55 AM [Info]: add task: installFirstTempLicense
    Jul 16, 2007 11:28:55 AM [Info]: add task: JLoadImport
    Jul 16, 2007 11:28:55 AM [Info]: add task: runBatchInstall
    Jul 16, 2007 11:28:55 AM [Info]: add task: runBatchConfig
    Jul 16, 2007 11:28:55 AM [Info]: add task: runBatchUninstall
    Jul 16, 2007 11:28:55 AM [Info]: add task: secureStorePropsCreate
    Jul 16, 2007 11:28:55 AM [Info]: add task: secureStoreFSAddDBEntries
    Jul 16, 2007 11:28:55 AM [Info]: add task: CreateIcmonAuthenticationFile
    Jul 16, 2007 11:28:55 AM [Info]: loaded
    Jul 16, 2007 11:28:55 AM [Info]: Adding to classpath: D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\instancemgt.jar
    Jul 16, 2007 11:28:55 AM [Info]: loading ... D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\instancemgt.jar
    Jul 16, 2007 11:28:55 AM [Info]: read ... C:\Dokumente und Einstellungen\swalter\Lokale Einstellungen\Temp\I1184578015\Windows\instancemgt.xml
    Jul 16, 2007 11:28:55 AM [Info]: -
    TaskLibrary: instancemgt
         description: This tasklibrary manages an SAP instance
              Task: RemoveSAPStreams
                   description: remove /tmp/.sapstreams* files (UNIX only)
                   definition(indep): com.sap.instancemgt.unx.RemoveTmpSAPStreams
                   Paramter: INSTANCE
                        description: instance number
                   Paramter: INSTANCE_TYPE
                        description: instance type(scs|java)
                        defaultValue:
              Task: RunCleanIPC
                   description: runs cleanipc (UNIX only)
                   definition(indep): com.sap.instancemgt.unx.RunCleanIPC
                   Paramter: DIR/GF/EXE
                        description: the path of the directory of cleanipc
                   Paramter: INSTANCE
                        description: instance number
              Task: SAPServiceCreate
                   description: creates a SAP service
                   definition(WIN): com.sap.instancemgt.win.SAPServiceCreateDEV
                   definition(UNX): com.sap.instancemgt.unx.SAPServiceCreate
                   Paramter: DIR/GF/EXE
                        description: the path to the sapstartsrv
                   Paramter: SID
                        description: the SID of the system
                   Paramter: PATH_TO_PROFILE
                        description: the path to (including the profile name)
                   Paramter: NR
                        description: the number of the instance
                   Paramter: USER
                        description: the user-only on unix
                        defaultValue:
                   Paramter: GROUP
                        description: the group-only on unix
                        defaultValue:
                   Paramter: SAPINIT
                        description: the sapini file
                   Paramter: INSTALL_SAPINIT_SH
                        description: the install sapini.sh
              Task: SAPServiceCreatePROD
                   description: creates a SAP service
                   definition(WIN): com.sap.instancemgt.win.SAPServiceCreatePROD.xml
                   definition(UNX): com.sap.instancemgt.unx.SAPServiceCreate
                   Paramter: DIR/GF/EXE
                        description: the path to the sapstartsrv
                   Paramter: SID
                        description: the SID of the system
                   Paramter: PATH_TO_PROFILE
                        description: the path to (including the profile name)
                   Paramter: NR
                        description: the number of the instance
                   Paramter: USER
                        description: the user-only on unix
                        defaultValue:
                   Paramter: GROUP
                        description: the group-only on unix
                        defaultValue:
                   Paramter: SAPINIT
                        description: the sapini file
                   Paramter: INSTALL_SAPINIT_SH
                        description: the install sapini.sh
                   Paramter: SAPSERVICE_USER
                        description: the sapservice user + domain
                        defaultValue: $(DOMAIN)\SAPService$(SID)
                   Paramter: SAPSERVICE_USER_PWD
                        description: the sapservice pwd
                   Paramter: SIDADM_USER
                        description: the sidadm + domain
              Task: SAPServiceRemove
                   description: removes a SAP service
                   definition(WIN): com.sap.instancemgt.win.SAPServiceRemove.xml
                   definition(UNX): com.sap.instancemgt.unx.SAPServiceRemove
                   Paramter: DIR/GF/EXE
                        description: the path to the sapstartsrv
                   Paramter: SID
                        description: the SID of the system
                   Paramter: PATH_TO_PROFILE
                        description: the path to (including the profile name)
                   Paramter: NR
                        description: the number of the instance
                   Paramter: USER
                        description: the user-only on unix
                        defaultValue:
              Task: SAPServiceStop
                   description: stops a SAP service
                   definition(WIN): com.sap.instancemgt.win.SAPServiceStop.xml
                   definition(UNX): com.sap.instancemgt.unx.SAPServiceStop
                   Paramter: DIR/GF/EXE
                        description: the path to the sapcontrol
                   Paramter: SID
                        description: the SID of the system
                   Paramter: NR
                        description: the number of the instance
                   Paramter: HOSTNAME
                        description: the hostname
                        defaultValue: .
              Task: SAPInstanceStart
                   description: starts a SAP instance
                   definition(WIN): com.sap.instancemgt.win.SAPInstanceStart.xml
                   definition(UNX): com.sap.instancemgt.unx.SAPInstanceStart
                   Paramter: DIR/GF/EXE
                        description: the path to the sapcontrol
                   Paramter: SID
                        description: the SID of the system
                   Paramter: NR
                        description: the number of the instance
                   Paramter: HOSTNAME
                        description: the hostname
                        defaultValue: .
                   Paramter: START
                        description: really start
                        defaultValue: true
              Task: SAPInstanceStop
                   description: starts a SAP instance
                   definition(WIN): com.sap.instancemgt.win.SAPInstanceStop.xml
                   definition(UNX): com.sap.instancemgt.unx.SAPInstanceStop
                   Paramter: DIR/GF/EXE
                        description: the path to the sapcontrol
                   Paramter: SID
                        description: the SID of the system
                   Paramter: NR
                        description: the number of the instance
                   Paramter: HOSTNAME
                        description: the hostname
                        defaultValue: .
                   Paramter: STOP
                        description: do you really want to start - this is a workaround
                        defaultValue: true
              Task: SAPInstanceStartDontWait
                   description: stops a SAP instance
                   definition(WIN): com.sap.instancemgt.win.SAPInstanceStartDontWait.xml
                   definition(UNX): com.sap.instancemgt.unx.SAPInstanceStartDontWait
                   Paramter: DIR/GF/EXE
                        description: the path to the sapcontrol
                   Paramter: SID
                        description: the SID of the system
                   Paramter: NR
                        description: the number of the instance
                   Paramter: HOSTNAME
                        description: the hostname
                        defaultValue: .
                   Paramter: START
                        description: do you really want to start - this is a workaround
                        defaultValue: true
              Task: callBootstrap
                   description: runs the bootstrap
                   definition(WIN): com.sap.instancemgt.win.callBootstrap.xml
                   definition(UNX): com.sap.instancemgt.unx.CallBootstrap
                   Paramter: DIR/GF/EXE
                        description: the path to the sapcontrol
                   Paramter: JEE_PROFILE
                        description: path to the jee profile
              Task: callSapcpe
                   description: runs the sapcpe
                   definition(indep): com.sap.instancemgt.CallSAPCPE
                   Paramter: DIR/GF/EXE
                        description: the path to the sapcontrol
                   Paramter: PROFILE
                        description: path to the jee profile
                   Paramter: LIST
                        description: the list to copy
                   Paramter: SOURCE
                        description: the source directory
                   Paramter: TARGET
                        description: the target directory
                        defaultValue:
    Jul 16, 2007 11:28:55 AM [Info]: add task: RemoveSAPStreams
    Jul 16, 2007 11:28:55 AM [Info]: add task: RunCleanIPC
    Jul 16, 2007 11:28:55 AM [Info]: add task: SAPServiceCreate
    Jul 16, 2007 11:28:55 AM [Info]: add task: SAPServiceCreatePROD
    Jul 16, 2007 11:28:55 AM [Info]: add task: SAPServiceRemove
    Jul 16, 2007 11:28:55 AM [Info]: add task: SAPServiceStop
    Jul 16, 2007 11:28:55 AM [Info]: add task: SAPInstanceStart
    Jul 16, 2007 11:28:55 AM [Info]: add task: SAPInstanceStop
    Jul 16, 2007 11:28:55 AM [Info]: add task: SAPInstanceStartDontWait
    Jul 16, 2007 11:28:55 AM [Info]: add task: callBootstrap
    Jul 16, 2007 11:28:55 AM [Info]: add task: callSapcpe
    Jul 16, 2007 11:28:55 AM [Info]: loaded
    Jul 16, 2007 11:28:55 AM [Info]: Adding to classpath: D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\iumaxdb.jar
    Jul 16, 2007 11:28:55 AM [Info]: Adding to classpath: D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\iumssql.jar
    Jul 16, 2007 11:28:55 AM [Info]: Adding to classpath: D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\runnerstarter.jar
    Jul 16, 2007 11:28:55 AM [Info]: Adding to classpath: D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\sapdbc.jar
    Jul 16, 2007 11:28:55 AM [Info]: Adding to classpath: D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\sltoolbox.jar
    Jul 16, 2007 11:28:56 AM [Info]: Adding to classpath: D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\sqljdbc.jar
    Jul 16, 2007 11:28:56 AM [Info]: Adding to classpath: D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\system.jar
    Jul 16, 2007 11:28:56 AM [Info]: loading ... D:\usr\sap\CE1\insthome\primaryApplicationServer\lib\system.jar
    Jul 16, 2007 11:28:56 AM [Info]: read ... C:\Dokumente und Einstellungen\swalter\Lokale Einstellungen\Temp\I1184578015\Windows\system.xml
    Jul 16, 2007 11:28:56 AM [Info]: -
    TaskLibrary: system
         description: This tasklibrary manage all operation on a os system
              Task: createOSUser
                   description: creates a os user
                   definition(indep): com.sap.os.usermgt.CreateUser
                   Paramter: name
                        description: the name of the user
                   Paramter: password
                        description: the password of the user
                   Paramter: primaryGroup
                        description: the primaryGroup of the user
                   Paramter: comment
                        description: the comment of the user
                        defaultValue: this is user $(name)
                   Paramter: homeDir
                        description: the homeDir of the user
                        defaultValue: /home/$(name)
                   Paramter: id
                        description: the id of the user
                        defaultValue:
                   Paramter: shell
                        description: the shell of the user
                        defaultValue: /bin/csh
              Task: createGroup
                   description: creates a group
                   definition(indep): com.sap.os.usermgt.CreateGroup
                   Paramter: gid
                        description: the group id
                   Paramter: name
                        description: the name of the group
                   Paramter: description
                        description: the description of the group
                        defaultValue: this is goup $(name)
              Task: addUserToGroup
                   description: adds a user to a group
                   definition(indep): com.sap.os.usermgt.AddUserToGroup
                   Paramter: uid
                        description: the user id of the user
                   Paramter: gid
                        description: the group id of the user
              Task: addGroupToGroup
                   description: adds a group to a group
                   definition(indep): com.sap.os.usermgt.AddGroupToGroup
                   Paramter: group
                        description: the group to add
                   Paramter: targetGroup
                        description: the target group
              Task: addUserPrivileges
                   description: gives user the Priviledges
                   definition(indep): com.sap.os.usermgt.AddUserPrivileges
                   Paramter: username
                        description: the  username
                   Paramter: privileges
                        description: comma seperated list of priviledge
              Task: addUserEnvRegEntry
                   description: gives user the Priviledges
                   definition(indep)

    Hello,
    I just had the same problem: the installation stopped with an ERROR while executing task "JLoadImport". In my case, the MaxDB:CE1 service was stopped in service configuration (eventually because of a previous error). After starting the MaxDB:CE1 service in service configuration, the setup can be started again and runs without any problems.
    Best Regards,
    Thilo Braeske

  • How many Oracle Licences required ?

    Hi,
    Can somebody help me in understanding the number of oracle licences required for the following server specifications :-
    Server is SUN V890 4x UltraSparc IV DualCore running Solaris 9.
    Please be elaborative , as I need to understand and learn, how is it being calculated.
    Regards
    Sumit

    If you go to http://store.oracle.com, choose your country, and then choose Licensing Definitions you will see text along the lines of
    sumitsingh3 wrote:
    Processor: shall be defined as all processors where the Oracle programs are installed and/or running. Programs licensed on a processor basis may be accessed by your internal users (including agents and contractors) and by your third party users. For the purpose of counting the number of processors which require licensing for a Sun UltraSPARC T1 processor with 4, 6 or 8 cores at 1.0 gigahertz or 8 cores at 1.2 gigahertz for only those servers specified on the Sun Server Table which can be accessed at http://oracle.com/contracts , “n” cores shall be determined by multiplying the total number of cores by a factor of .25. For the purposes of counting the number of processors which require licensing for AMD and Intel multicore chips, “n” cores shall be determined by multiplying the total number of cores by a factor of .50. For the purposes of counting the number of processors which require licensing for all hardware platforms not otherwise specified in this section, a multicore chip with "n" cores shall be determined by multiplying "n" cores by a factor of .75. All cores on all multicore chips for each licensed program for each factor listed below are to be aggregated before multiplying by the appropriate factor and all fractions of a number are to be rounded up to the next whole number. When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket.
    If you follow the link again and get to the Sun Server table, I don't see a V890 listed. I also don't believe the V890 is using the UltraSPARC T1 processor, so you would end up using the 0.75 multiplier rather than the 0.25 multiplier.
    Given that,
    4 sockets * 2 cores per socket * 0.75 = 8 * 0.75 = 6 processors
    Justin

  • Using definition in orcale binary code license agreement

    using definition in oracle binary code license agreement for java se platform products:
    G. COMMERCIAL FEATURES NOTICE. For purpose of complying with Supplemental Term Section C.(v)(b) and D.(v)(b), your license agreement shall include the following notice, where the notice is displayed in a manner that anyone using the Software will see the notice:
    Use of the Commercial Features for any commercial or production purpose requires a separate license from Oracle. “Commercial Features” means those features identified Table 1-1 (Commercial Features In Java SE Product Editions) of the Software documentation accessible at http://www.oracle.com/technetwork/java/javase/documentation/index.html
    anyone using the Software : What kind of using is meant? (For example installing?)

    hello,
    thanks for your comment. please can you help me to find the correct forum.
    perhaps as oracle employee you can put it there?

  • This Version of Lenovo ThinkVantage Toolbox is not licensed to run on this system (**bleep**)?

    I have a 3 week old W510, Windows 7 64-bit, i7 Thinkpad. Over the Chritmas holidays I was able to start exploring the software that came loaded on the machine. One of these was the ThinkVantage Toolbox which I accessed at least 2 or 3 times to explore the programs and what they had to offer. It worked fine and I was able to view the different offerings inside the toolbox.
    Two days ago I used the Lenovo ThinkVantage Tools "Update and Drivers" to find updates to the the machine. It found some updates (I'm not sure of each and everyone but they seemed reasonable) and downloaded them all to bring the system up-to-date.
    Today I tried to access the Toolbox and was greeted with a License Authentication Failed message box with this message:
    "This Version of Lenovo ThinkVantage Toolbox is not licensed to run on this system".
    I assume it was something in the recent updates that did this. I have only installed a couple other photo editing pieces of software since then that I doubt would have any effect on this.
    I certainly can do a system restore back to before I did the updates, but I'd rather not since a) the updates for the most part appeared to be needed and were successful, b) I'd rather not have to update those things that have auto-updated (like Norton and Super Anti-Spyware definitions), and c) I'm not sure restoring will help, not to mention re-installing the other pieces of software that successfully installed.
    I have been a good doo-bee poster and searched this forum and other web resources and while there is reference made to some solutions for this, I didn't fully understand them so I figured I would ask here for help before trying anything. I do have Lenovo phone support but trying here before calling them.
    Thoughts anyone? Should I simply download the latest ThinkVantage Toolbox software and install it? If so, should I uninstall the version I have now?
    Looking for any assistance anyone could render.
    Thank you.
    Jim
    Solved!
    Go to Solution.

    Hi again Jim,
    First of all you're welcome!
    I have another suggestion for you, it might successfully help you in updating Toolbox to the current version, but for this I'd suggest that you first create a restore point just in case the advice fails. Once created a restore point, launch ThinkVantage Toolbox, give it a minute to completely load/run quick tests etc, thereafter click the green colored question mark -> check for updates, once it finds the latest version, let it download and install, I'm hopeful you won't run into any issues via this approach.
    Keep us posted.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Adobe Presenter failed to open because either it is not licensed or there is an error.. Help!

    I have been using registered version of Adobe Presenter ( I have a serial number) for some time. Now I receive the following error message:
    "Adobe Presenter failed to open because either it is not licensed or there is an error in the licensing system. Please close and re-launch PowerPoint and enter
    serial number to license it. If this problem persists, reinstall this product and try again."
    The registration page pops up but just briefly--too fast to click the accept/decline buttons. I have tried deleting the Office and Adobe preference files under User as well as uninstalling/reinstalling but the error message persists making presenter unusable. I also tried to install just a a trial version but also receive the same error message.
    System is Win 7. As I said I have been using it for over a year successfully.
    What can I do to fix this?
    Thanks...Dave

    Thanks Nirupam.  Here are the answers.
    The hardware for recording audio is simple mini-phone plug to mini-phone jack in the back of the computer.  The driver is HD compatible (Microphone High Definition Audio Device)
    After recording, I am able to replay it, but Powerpoint crashes soonafter, and not predictably.
    So far I have added no markers or specified any actions.
    Specifically, I have taken enumerable actions-- some of these per suggestions made in this forum (to the letter).  Perhaps the most frequent action is to drill into Powerpoint options, and re-enable the Adobe Presenter add-in.
    I have been able to apply neither the 7.05 patch nor the 7.06 successfully.  Both failed (the error message said it wouldn't apply to this version of Presenter.  Again, it's Presenter_WWE.exe).
    I can see that you have ramped this up to known bug status.  I appreciate that and am sure you'll come up with a rock solid solution.
    As I've said earlier, one of Adobe's strengths, for me, is that they understand the needs and idiosyncracies of faculty.  Faculty cannot handle geek solutions (like changing registries).  After frustration, they will abandon and move on.
    Thanks,
    Glen

  • Font licensing and EULA: Adobe Type Basics OpenType Edition

    Hi all,
    I'm not necesarilly working with graphic design daily. However, I may have to replicate a design for a publication that uses Adobe Garamond Pro, which is why I got interested in Adobe - Fonts : Adobe Type Basics OpenType Edition.
    However, before I shell out the cash, I'd like to ask a few questions about related EULA's and font licensing issues - as the last thing I want to do is buy something, and then end up sued/financially destroyed/imprisoned anyways. (which is why I prefer with open fonts & software - at least no worries about prison, in case of misunderstanding the legalese)
    So, here are the questions:
    I am a Linux user, and I primarily intent to use the fonts with xelatex. On the download page, there are two options: "Win" and "Mac". Which one should I choose? Related question: Adobe Forums: Install a Mac font on a PC:Windows can use OpenType, Windows Type1 and Windows TrueType fonts. Windows cannot directly read Mac TrueType or Mac Type1 fonts.
    Macintosh can use OpenType, Mac Type1, Mac TrueType, and Win TrueType. Adobe products can read some Windows Type 1 fonts if installed in the correct folder.
    Versions - possibly unrelated, but I've found this old comment from 2003 for 'Adobe Type Basics 5.0 Mlp (CD-ROM)':Unfortunately, this product includes fonts in the older PostScript "Type 1" font format instead of the newer OpenType format. Adobe sells an OpenType edition of Adobe Type Basics, but this is a download-only product. I wish Adobe would sell the OpenType Edition on CD.... so just to make sure: I would definitely download the OpenType if I buy from the above  Adobe - Fonts : Adobe Type Basics OpenType Edition link, right?
    Re-download - the Adobe Type Basics page doesn't mention the file format of the download, nor its size. With bought fonts, I'd consider installing whatever I need for as long as project lasts, then deleting everything from my computer, since I don't like proprietary stuff sitting on it. Thus, I'd be interested in re-donwloading the Adobe Type Basics package. So is this package a zip file or similar, if so - how big is it? Can I download the file multiple times after purchase? Is the number of times I can redownload limited?
    I may have to do (in a role of page layouter for an academic institution) a document for a relatively big academic publisher (Springer); and I have little idea about how font licensing works there. Let's say I prepare a PDF which uses Adobe Garamond Pro, and embeds that font. Is it legal for me to just send that document to the publisher for printing, if I had purchased the Basics OpenType edition? I'm worried because I found in Adobe Forums: Install a Mac font on a PC:As I understand it, print service providers are required by the font EULA to own the font even though the customer provides it.
    I suggest you ask your customer to purchase the modern OpenType versions of the fonts. ... but then, Springer are "publishers", not "printers"? How worried should I be about this? Should I ask for confirmation in writing from them, that they own the particular embedded font? Then again, since in this case I'd be working for an academic institution as page layouter, should the academic institution also buy the font? If the academic institution already owns the font, am I legally obliged to own it as a page layouter (even if I'd use that font on the institutions computers with licensed fonts on them)? I'm pretty sure I'd be legally obliged to own it if I intend to prepare the layout on my own computer, is that correct?
    The download page mentions for "End User License": 5 computers. Say I install one Adobe Garamond Pro on one computer, use it there for the duration of a project, and then delete it from the computer. Is this computer then still counted towards the number of seats?
    Occasionally, I have my personal notes and such typeset in Latex, and here I send them to a printer (as in, "print service provider") to print 2-3 copies in softcover for personal use. As far as I understand it, this does not represent a "published" book (and so there isn't a "publisher" institution as in the Springer example above). So, in this case, again the same situation: let's say I prepare a PDF which uses Adobe Garamond Pro, and embeds that font. Is it legal for me to just send that document to the print house for printing, if I had purchased the Basics OpenType edition? How worried should I be about this?
    Other neat related links I found:
    Adobe Forums: Font EULA Question Re: Selling Logos;  
    Adobe Forums: font liscensing: upgrading from print to digital ...
    Well, I believe this is all I have for asking (for now) - thanks in advance for any answers!

    I am a Linux user, and I primarily intent to use the fonts with xelatex. On the download page, there are two options: "Win" and "Mac". Which one should I choose?
    Related question: Adobe Forums: Install a Mac font on a PC:Windows can use OpenType, Windows Type1 and Windows TrueType fonts. Windows cannot directly read Mac TrueType or Mac Type1 fonts.
    Macintosh can use OpenType, Mac Type1, Mac TrueType, and Win TrueType. Adobe products can read some Windows Type 1 fonts if installed in the correct folder.
    If you want Adobe Type Basics OpenType edition, then the fonts support multiple platforms.  OpenType fonts work on Mac, Win and Linux systems.
    Versions - possibly unrelated, but I've found this old comment from 2003 for 'Adobe Type Basics 5.0 Mlp (CD-ROM)':Unfortunately, this product includes fonts in the older PostScript "Type 1" font format instead of the newer OpenType format. Adobe sells an OpenType edition of Adobe Type Basics, but this is a download-only product. I wish Adobe would sell the OpenType Edition on CD.... so just to make sure: I would definitely download the OpenType if I buy from the above  Adobe - Fonts : Adobe Type Basics OpenType Edition link, right?
    Yes, the Adobe Type Basics Open Type Edition would provide you with OpenType versions of the fonts.  Sorry that we don’t offer all the different fonts, font families and variations on CD-ROM, but it would be cost-prohibitive to make all those versions, and font software is relatively small compared to application software.  That said, Our font EULA (End User License Agreement) which can be found at: http://www.adobe.com/type/browser/legal/pdfs/wf_EULA071111/EULA5seat_USEnglish07.11.11.htm l states: “2.5 Backup Copy. You may make a reasonable number of backup copies of the Software, provided your backup copies are not installed or used for other than archival purposes.” So you can make your own CD-ROM.
    Re-download - the Adobe Type Basics page doesn't mention the file format of the download, nor its size. With bought fonts, I'd consider installing whatever I need for as long as project lasts, then deleting everything from my computer, since I don't like proprietary stuff sitting on it. Thus, I'd be interested in re-donwloading the Adobe Type Basics package. So is this package a zip file or similar, if so - how big is it? Can I download the file multiple times after purchase? Is the number of times I can redownload limited?
    The file format is OpenType (CFF).  I would recommend making a backup copy of these fonts if you don’t want to keep them on your system.  Our Electronic Software Download service is not meant to be used for storage.
    I may have to do (in a role of page layouter for an academic institution) a document for a relatively big academic publisher (Springer); and I have little idea about how font licensing works there. Let's say I prepare a PDF which uses Adobe Garamond Pro, and embeds that font. Is it legal for me to just send that document to the publisher for printing, if I had purchased the Basics OpenType edition? I'm worried because I found in Adobe Forums: Install a Mac font on a PC:As I understand it, print service providers are required by the font EULA to own the font even though the customer provides it.
    I suggest you ask your customer to purchase the modern OpenType versions of the fonts. ... but then, Springer are "publishers", not "printers"? How worried should I be about this? Should I ask for confirmation in writing from them, that they own the particular embedded font? Then again, since in this case I'd be working for an academic institution as page layouter, should the academic institution also buy the font? If the academic institution already owns the font, am I legally obliged to own it as a page layouter (even if I'd use that font on the institutions computers with licensed fonts on them)? I'm pretty sure I'd be legally obliged to own it if I intend to prepare the layout on my own computer, is that correct?
    Wow!  Lots of questions here.  First of all, publishers publish.  Printing is just one form of publishing.  Embedding information for Adobe fonts can be found at the following:
    http://www.adobe.com/type/browser/legal/additional_licenses.html
    http://www.adobe.com/type/browser/info/embedding.html
    If you send a file to a print service provider and send a copy of the font along as well, then the printer needs to own a valid copy themselves.  If you send the print service provider a PDF version of the file, then you can embed the font in the PDF (but you would not send the a raw version of the font).  In this case, the printer doesn’t need the font, because it is embedded in the document.
    The download page mentions for "End User License": 5 computers. Say I install one Adobe Garamond Pro on one computer, use it there for the duration of a project, and then delete it from the computer. Is this computer then still counted towards the number of seats?
    If you buy a license for Adobe Garamond Pro, you have up to 5 seats.  So, it can be installed on a maximum of five computers at your company.  It is that simple to be in compliance.  If you were to obtain Adobe Garamond  Pro by purchasing Adobe Type Basics OpenType Edition, then you can install the entire set on up to five computers at your company.  You are licensing the set, and the fonts cannot be split up and used across multiple users at your company.
    Occasionally, I have my personal notes and such typeset in Latex, and here I send them to a printer (as in, "print service provider") to print 2-3 copies in softcover for personal use. As far as I understand it, this does not represent a "published" book (and so there isn't a "publisher" institution as in the Springer example above). So, in this case, again the same situation: let's say I prepare a PDF which uses Adobe Garamond Pro, and embeds that font. Is it legal for me to just send that document to the print house for printing, if I had purchased the Basics OpenType edition? How worried should I be about this?
    Yes.  It is legal to send the document to a print service provider with the font embedded in PDF.  You are printing a document, and your interpretation of what it means to “publish” or be a “publisher” is not relevant.  The words don’t even appear in our EULA.

  • Licensing problems installing JDriver for MS SQL Server

    I've been having problems for some time now creating a connection pool in WL 5.1 using the MS SQLServer4v70 JDriver. I am at wits end and haven't been able to find a solution or find anybody that could give me a solution. Below is a better description of the problem including exact error messages and configuration.
    There's some simple problem here, but I'm not an
    installation expert. Would you please post this to
    the support.install group? If you don't get help
    quickly from there, let me know.
    JoeAt 09:54 AM 10/31/00 -0800, you wrote:
    Here's the exact error message:
    Tue Oct 31 09:52:09 PST 2000:<I> <WebLogicServer> IIOP subsystem enabled.
    weblogic.common.LicenseNotFoundException: Could not find licensing file:
    Your WebLogic license file, named either WebLogicLicense.xml or
    WebLogicLicense.class must be located in a directory that is
    in your CLASSPATH. By default, your license file is located in the
    /license directory located in your WebLogic home directory
    (the root directory of your WebLogic installation).
    As of version 4.0 of WebLogic, a new XML-format license file has
    replaced the older, compiled class format license file.
    The WebLogic Server will recognize either format.
    For additional information on WebLogic licenses or on setting your
    classpath, see the i
    stallation instructions in the WebLogic Server documentation, available at
    http://e-docs.bea.com/
    my weblogic class path looks like:
    CLASSPATH Prefix c:\weblogic\mssqlserver4v70\classes
    CLASSPATH
    c:\weblogic\mssqlserver4v70\classes;c:\jdk1.3\lib\tools.jar;c:\jdk1.3\jre\li
    b\rt.jar;c:\jdk1.3\jre\lib\i18n.jar;C:\weblogic\license;C:\weblogic\classes\
    boot;C:\weblogic\cla
    sses;C:\weblogic\lib\weblogicaux.jar;C:\weblogic\eval\cloudscape\lib\cloudsc
    ape.jar
    JAVA_HOME c:\jdk1.3
    WEBLOGIC_LICENSEDIR C:\weblogic\license
    WEBLOGIC_HOME C:\weblogic
    system properties:
    java.security.manager
    java.security.policy==C:\weblogic\weblogic.policy
    weblogic.system.home=C:\weblogic
    java.compiler=symcjit
    weblogic.class.path=C:\weblogic\license;C:\weblogic\classes;C:\weblogic\myse
    rver\serverclasses;C:\weblogic\lib\weblogicaux.jar
    INITIAL_HEAP 64 MB
    MAX_HEAP 64 MB
    SERVERCLASSPATH
    c:\weblogic\mssqlserver4v70\classes;c:\jdk1.3\jre\lib\rt.jar;c:\jdk1.3\jre\l
    ib\i18n.jar;C:\weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudsc
    ape.jar
    Type "wlconfig -help" for program usage.
    The license file is attached:
    -Matt
    -----Original Message-----
    From: [email protected] [mailto:[email protected]]
    Sent: Tuesday, October 31, 2000 8:41 AM
    To: Matthew Heaton
    Subject: RE: Problems creating connection pool
    At 04:35 PM 10/30/00 -0800, you wrote:
    Still having problems with it not finding the licenseOk, what is the exact failure message? Does the server start fine?
    Then it's finding the server license in the weblogiclicense.xml file.
    Is it then failing to find the driver license? If so, show me your
    editted xml license file.
    Joe
    Currently nothing related to the driver is in my classpath and
    c:\weblogic\mssqlserver4v70\classes is in my weblogic classpath. I deleted
    the license folder for the driver after moving the guts of it into the main
    weblogic license file.
    -Matt
    -----Original Message-----
    From: [email protected] [mailto:[email protected]]
    Sent: Monday, October 30, 2000 3:46 PM
    To: Matthew Heaton
    Subject: Re: Problems creating connection pool
    Hi Matt.
    You did the right thing adding the driver to the weblogic.class.path.
    That's where it should be, not in the java.class.path. The current
    licensing issue is that the weblogic server has(had?) it's own copy of
    WebLogicLicense.xml, containing the server licenses. The one from thedriver
    is now in the path. It contains the driver license, but not the server
    stuff. Edit the server one, adding the guts of the driver one, and
    delete the driver xml license file from your path.
    Joe
    Matt Heaton wrote:
    This is a problem that has been a roadblock for me for a while, I'm usingWL 5.1 and trying to create a connection pool with the MS SQL server 4v70
    JDriver.
    Here is the code to create the connection pool:
    weblogic.jdbc.connectionPool.SQLPool=\
    url=jdbc:weblogic:mssqlserver4:MATTHEWH1:1433,\
    driver=weblogic.jdbc.mssqlserver4.Driver,\
    initialCapacity=1,\
    maxCapacity=2,\
    capacityIncrement=1,\
    props=user=AceUser;password=AceUser;server=MATTHEWH1
    I've addedc:\weblogic\mssqlserver4v70\classes;c:\weblogic\mssqlserver4v70\license to
    my class path, but I was getting a class not found exception when Weblogic
    tried to make the connection pool. I then added
    c:\weblogicmssqlserver4v70\classes to my Weblogic classpath and got the
    following error:
    weblogic.common.LicenseNotFoundException: Could not find licensing file:
    Your WebLogic license file, named either WebLogicLicense.xml or
    WebLogicLicense.class must be located in a directory that is
    in your CLASSPATH. By default, your license file is located in
    the
    /license directory located in your WebLogic home directory
    (the root directory of your WebLogic installation).
    As of version 4.0 of WebLogic, a new XML-format license file has
    replaced the older, compiled class format license file.
    The WebLogic Server will recognize either format.
    For additional information on WebLogic licenses or on settingyour
    classpath, see the in
    stallation instructions in the WebLogic Server documentation, available
    at
    http://e-docs.bea.com/
    So I tried adding c:\weblogic\mssqlserver4v70\license to the weblogicclasspath and got yet a different error:
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    Loaded License : C:/weblogic/license/WebLogicLicense.xml
    However Unable to start because :
    No License found for WebLogic
    As well as the fact that: No License found for Tengah
    As well as the fact that: No License found for WebLogic/JDBC
    As well as the fact that: No License found for Tengah/JDBC
    As well as the fact that: No License found for jdbcKona/T3
    WebLogic Server terminated with an abnormal condition of 1
    What do I do? I've tried everything I can think of, I was able to getthis to work the first time that I tried to do it but everytime I've tried
    since then this happens.
    -Matt--
    PS: Folks: BEA WebLogic is in S.F. with both entry and advanced positions
    for
    people who want to work with Java and E-Commerce infrastructure products.
    Send
    resumes to [email protected]
    The Weblogic Application Server from BEA
    JavaWorld Editor's Choice Award: Best Web Application Server
    Java Developer's Journal Editor's Choice Award: Best Web Application
    Server
    Crossroads A-List Award: Rapid Application Development Tools for Java
    Intelligent Enterprise RealWare: Best Application Using a Component
    Architecture
    http://www.bea.com/press/awards_weblogic.html
    The Weblogic Application Server from BEA
    JavaWorld Editor's Choice Award: Best Web Application Server
    Java Developer's Journal Editor's Choice Award: Best Web Application
    Server
    Crossroads A-List Award: Rapid Application Development Tools for Java
    Intelligent Enterprise RealWare: Best Application Using a Component
    Architecture
    http://www.bea.com/press/awards_weblogic.html
    Attachment Converted: "c:\eudora\attach\WebLogicLicense11.xml"
    The Weblogic Application Server from BEA
    JavaWorld Editor's Choice Award: Best Web Application Server
    Java Developer's Journal Editor's Choice Award: Best Web Application Server
    Crossroads A-List Award: Rapid Application Development Tools for Java
    Intelligent Enterprise RealWare: Best Application Using a Component Architecture
    http://www.bea.com/press/awards_weblogic.html

    Eric Ma wrote:
    Joe:
    Connection is a LOCAL variable declared in each method. DataSource is an instance
    variable.That sounds fine... let me see your code (main block plus finally block). How long does this
    take to reproduce? Show me your pool definition.
    thanks,
    Joe
    >
    >
    Eric
    Joseph Weinstein <[email protected]> wrote:
    Eric Ma wrote:
    I was given the unfortunate task :-) of getting data out of M$FT SQL6.5. I set
    up a JDBC connection pool using jDriver in mssqlserver4v65.jar, andcreated a
    JDBCDataSource for the pool. I am using a stateless session bean +JDBC (with
    the DAO pattern) to get data. In the DAO class I have an instancevariable for
    the datasource, which I look up in the constructor. In the DAO's businessmethod
    I RELIGIOUSLY call datasource.getConnect() first, and ALWAYS call connection.close()
    in the finally block. Now the initial requests are fine, but aftera while I
    got a weblogic.common.ResourceException telling me there were no moreconnection
    available in the pool. Is this a jDriver bug? I never run into sucha problem
    with an Oracle connection pool using the thin driver.
    Any insight will be greatly appreciated.
    Eric MaHi. Is the connection object an instance variable? That would be a problem.
    The connection object has to be a method variable to be safe from multithreading
    issues.
    Joe

  • Adobe Acrobat 9 Pro - License Agreement ACCEPT does not work

    Today I purchased a license for Adobe Acrobat 9 Pro, downloaded the software and installed. I execute the program and when I get to License Agreement I select accept and nothing happens. I can't get beyond this point.
    I called Adobe Tech Support and they weren't able to help. I've seen many posts about this and no definite answer.
    Before requesting a refund, does anybody know how to fix this problem?
    I installed on Windows 7 Pro.
    Thank you,

    I know this is an old posting, but for those like me who couldn't find the answer:
    Had the exact same problem and  tried all the previous tips to resolve, including registering the  jscript.dll.
    Thanks to the genius who posted the answer on another  'windows' forum (wish I could find that again).
    Create a new  local admin account (add that account to the administrator  group).
    Login to the new account and launch Acrobat. Then  (hopefully) you can click "Accept" to the license agreement.
    The  registry key it creates is: HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\Adobe  Acrobat\9.0\AdobeViewer\EULAAcceptedForBrowser (DWORD=0x00000001). Not  sure if you can just manually add the registry value as I had already  fixed it by creating the new local account.
    After it accepts the  license agreement, you can go back into your normal profile and run  acrobat. yea!.

  • Acrobat 9 Pro: Licensing issue prevents Acrobat from opening. What's the fix?

    OK - or i should say not OK!!
    I am running the licensed version of Acrobat 9 Pro on Mac OSX. It is installed on 2 of my MacBook Pro 17" laptops. These machines are respectively 1 month and 14 months old, and both are completely up-to-date software wise. 3 weeks ago Acrobat presented the error message "Licensing for this product has stopped working" and then quits. Searching through the error logs reveals the following: No matching processes were found. Shutting down licensing service ...
    I have meticulously, several times worked through all the recommended steps on the Adobe site to address this issue but to no avail. Booting up in safe mode makes no difference. In desperation I re-installed the OS, but to no avail. My several and extended communications with Adobe online help have left me chatting with what sounded like a couple of uni students from India who had insufficient understanding of English, Macs and Acrobat. After 3 weeks my case has been closed twice by Adobe who report that they believe my issue is resolved and have therefore closed my case. Great!!! What's more, occasionally Safari is presented online with a pdf file which it attempts to load, and then crashes.
    This issue has seriously affected my ability to work with and create pdf's which in my work as a medical researcher is essential. To add insult to injury, I have wasted too many precious hours attempting to rectify the situation.
    The bottom line is caveat emptor (buyer beware). Adobe it seems are committed to making a sale but not to follow-up, service or genuine concern for their customers. When some company produces a less buggy (and cheaper) alternative I will be definitely be buying their wares.
    In the interim, if anybody out there can advise me as to how to get Acrobat working again, I would be most grateful.
    Have a great day.
    David

    When you reinstalled Acrobat, did you use the uninstaller? Also the uninstaller still leaves some files not removed.
    If your using OSX.4.11 go to Find file and type in Acrobat, find any files (not .pdf's) that are in the Library > Application support and Preferences.  Remove all traces of any of these files. Look both in Main Library, and in Library in your User Folder (has name you gave computer when you installed system).
    It appears your have a corrupt file.
    Many problems can be traced down to corrupt file(s) in Application Support or Preferences. Preference file will regenerate though any customizations you did will be lost.
    Have you installed more than the two Copies allowed (by accident)?
    Also, if you have tied to a a common Server/Network and both have computers running at same time, might have caused this. (unless you bought at site license if Adobe sells such).

  • Trying to resolve license issue

    So I am pretty stumped on how to proceed here and hopefully someone can be of some guidance. I purchased Adobe Creative Suite 5.5 for Windows back in early 2012. I've had this installed on two of my computers for the past couple of years and had no problems at all. Everything was wonderful. This was purchased from SoftwareKing.com who I have previously purchased legitimate licenses for software and at a slightly discounted rate. I have never had any problems with them and have confirmed that other licenses I have are legit from them.
    I tried to purchase the Creative Cloud upgrade for $29.95 but it fails the upgrade saying I do not have a valid license. I contacted support and they found that my license is an educational license. I had another rep verify this and they confirmed it. Software King claims they definitely did not sell me an educational license. Per Adobe I should just buy an upgrade to resolve this. That doesn't make much sense. And they have not provided any support as who I can contact at Adobe to investigate the matter (whether anything helps me or not I figure they should investigate fraudulent purchases).
    SoftwareKing is hands off the issue at this time because it was purchased over 2 years ago. Any suggestions on what to do? I suppose at this point I can just go for the $49.95 bundle but it bothers me I spent that much money on software and have been illegally using it, without my knowledge.

    Actually I believe you misunderstand. I have purchased this software for $2,000 and it turns out now that it was an educational license. I don't intend anyone to help me recoup the money or anything - I simply was hoping someone would help and let me know who to contact at Adobe to report the vendor for selling licenses in this fashion. I figured some people would care that a vendor is illegally selling software but so far nobody from Adobe support I spoke to cared.

  • Acrobat Pro XI problem+Accept End User License Agreement when opening a PDF inside IE

    Hi folks, this issue has been challenging.
    Acrobat Pro CC install
    W7 X64
    Deployment went ok after the code was worked out, but.....
    We use Desire to Learn content management system at the community college where I maintain the student computers at. When running D2L and a PDF has been embedded in some course material, I am getting the message below and the PDF won't open.
    “Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement" .
    The only fix so far is to run up Acrobat Pro and run the program once. Fine and dandy, but we are looking at 700+ machines to clear in this fashion. The other part of this scenario we we also utilize Respondus Lockdown Browser to invigilate exams through D2L. Because of the "lock down" features, the student can't even get back to the desktop to run Acrobat and clear the message.
    I have tried a number of GPO entries to no avail. As well, disabled the IE PDF viewer add-on. I ran Procmon with no results either; .
    I have been scouring the Googlemachine and building on the GPO below to get around the issue with no results. I am hoping someone with a sharper eye than I can spot something or point me in the correct direction..
    Thanks eh.
    GPLabs-Acrobat Reader default .PDF file open
    Computer Configuration (Enabled)
    Policies
    Administrative Templates
    Policy definitions (ADMX files) retrieved from the central store.
    Adobe Acrobat XI/Preferences/General
    Policy         Setting       Comment
    Show messages when I launch Acrobat                                      Disabled
    Adobe Reader XI/Preferences/General
    Policy         Setting       Comment
    Show messages when I launch Reader                                      Disabled
    Adobe Reader XI/Preferences/Startup
    Policy         Setting       Comment
    Enable Protected Mode at startup                                                Disabled
    Preferences
    Windows Settings
    Registry
    ELUA=1 (Order: 1)
    General
    Action        Update
    Properties
    Hive  HKEY_CURRENT_USER (HKU\.DEFAULT)
    Key path    Software\Adobe\Acrobat Reader\11.0\AdobeViewer
    Value name        ELUA=1
    Value type           REG_DWORD
    Value data           0x1 (1)
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                No
    Remove this item when it is no longer applied                                                         No
    Apply once and do not reapply                                                                        No
    EULAAcceptedForBrowser (Order: 2)
    General
    Action                                                                  Update
    Properties
    Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
    Key path                                                              Software\Adobe\Adobe Acrobat\11.0\AdobeViewer
    Value name                                                        EULAAcceptedForBrowser
    Value type                                                           REG_DWORD
    Value data                                                           0x1 (1)
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                           No
    Remove this item when it is no longer applied                                                                 No
    Apply once and do not reapply                                                                                             No
    ELUA=1 (Order: 3)
    General
    Action                                                                  Update
    Properties
    Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
    Key path                                                              Software\Adobe\Acrobat Reader\10.0\AdobeViewer
    Value name                                                        ELUA=1
    Value type                                                           REG_DWORD
    Value data                                                           0x1 (1)
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                          No
    Remove this item when it is no longer applied                                                                   No
    Apply once and do not reapply                                                                                  No
    EULAAcceptedForBrowser (Order: 4)
    General
    Action                                                                  Update
    Properties
    Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
    Key path                                                              Software\Adobe\Adobe Acrobat\10.0\AdobeViewer
    Value name                                                        EULAAcceptedForBrowser
    Value type                                                           REG_DWORD
    Value data                                                           0x1 (1)
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                                   No
    Remove this item when it is no longer applied                                                                            No
    Apply once and do not reapply                                                                                             No
    bBrowserIntegration (Order: 5)
    General
    Action                                                                           Update
    Properties
    Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
    Key path                                                                       Software\Adobe\Acrobat Reader\11.0\Originals
    Value name                                                                  bBrowserIntegration
    Value type                                                                    REG_SZ
    Value data                                                                    00000000
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                                   No
    Remove this item when it is no longer applied                                                                            No
    Apply once and do not reapply                                                                                             No
    bBrowserIntegration (Order: 6)
    General
    Action                                                        Update
    Properties
    Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
    Key path                                                                       Software\Adobe\Acrobat Acrobat\11.0\Originals
    Value name                                                                  bBrowserIntegration
    Value type                                                                    REG_SZ
    Value data                                                                    00000000
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                                   No
    Remove this item when it is no longer applied                                                                            No
    Apply once and do not reapply                                                                                             No
    bBrowserIntegration (Order: 7)
    General
    Action                                                        Update
    Properties
    Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
    Key path                                                                       Software\Adobe\Acrobat Reader\10.0\Originals
    Value name                                                                  bBrowserIntegration
    Value type                                                                    REG_SZ
    Value data                                                                    00000000
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                                             No
    Remove this item when it is no longer applied                                                                                       No
    Apply once and do not reapply                                                                                                      No
    User Configuration (Enabled)
    Preferences
    Windows Settings
    Registry
    ELUA (Order: 1)
    General
    Action                                                        Update
    Properties
    Hive                                                                               HKEY_CURRENT_USER
    Key path                                                                       Software\Adobe\Acrobat Reader\11.0\AdobeViewer
    Value name                                                                  ELUA
    Value type                                                                    REG_DWORD
    Value data                                                                    0x1 (1)
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                                             No
    Run in logged-on user's security context (user policy option)                                                   No
    Remove this item when it is no longer applied                                                                                       No
    Apply once and do not reapply                                                                                                      No
    ELUA (Order: 2)
    General
    Action                                                                  Update
    Properties
    Hive                                                                               HKEY_CURRENT_USER
    Key path                                                                       Software\Adobe\Acrobat Reader\10.0\AdobeViewer
    Value name                                                                  ELUA
    Value type                                                                     REG_DWORD
    Value data                                                                    0x1 (1)
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                                             No
    Run in logged-on user's security context (user policy option)                                                   No
    Remove this item when it is no longer applied                                                                                       No
    Apply once and do not reapply                                                                                                      No
    .pdf (Order: 3)
    General
    Action                                              Update
    Properties
    Hive                                                  HKEY_CURRENT_USER
    Key path                                           software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.pdf
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                                   No
    Run in logged-on user's security context (user policy option)                                          No
    Remove this item when it is no longer applied                                                                            No
    Apply once and do not reapply                                                                                             No
    OpenWithList] (Order: 4)
    General
    Action                                                                                     Update
    Properties
    Hive                     HKEY_CURRENT_USER
    Key path              Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.PDF\OpenWithList]
    Value name        (Default)
    Value type           REG_SZ
    Value data           "AcroRd32.exe"
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                                   No
    Run in logged-on user's security context (user policy option)                                          No
    Remove this item when it is no longer applied                                                                            No
    Apply once and do not reapply                                                                                             No
    Control Panel Settings
    Folder Options
    Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe)
    pdf (Order: 1)
    General
    Action                                              Update
    Properties
    File Extension                                 pdf
    Associated Program                      C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
    Set as default                                  Enabled
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                                   No
    Run in logged-on user's security context (user policy option)                                          Yes
    Remove this item when it is no longer applied                                                                            No
    Apply once and do not reapply                                                                                             No
    Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe)
    pdf (Order: 2)
    General
    Action                                              Update
    Properties
    File Extension                                 pdf
    Associated Program                      C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe
    Set as default                                  Enabled
    Common
    Options
    Stop processing items on this extension if an error occurs on this item                                   No
    Run in logged-on user's security context (user policy option)                                          Yes
    Remove this item when it is no longer applied                                                                            No
    Apply once and do not reapply                                                                                             No

    Hi technobyte,
    Try using  APTEE to do EULA suppression and check.
    You might want to refer the docs:
    Creative Cloud Help | Using Adobe Provisioning Toolkit Enterprise Edition
    4   Installation Workflows — Enterprise Administration Guide
    Regards,
    Rave

Maybe you are looking for