License doesn't seem to have taken effect

I bought CF Builder back on 8/31. Installed it and I'm fairly certain I entered the serial number for it. But now it just told me that my trial period has expired and it is in limited-use mode. When I select the registration option from the Help menu, nothing happens. What's going on here?

When you start CFB, you'll be confronted with a screen that says your trial has expired (probably the one you mention in your post). On that very screen there's an option to put your registration number in. Put it in. That should sort it.
I dunno why the menu option doesn't work: I've never tried it, TBH.
Adam

Similar Messages

Setting mediaplayer.autoPlay doesn't seem to have any effect

Hi,
As topic says, setting the autoPlay property on MediaPlayer to false doesn't seem to have any effect on the VideoElement.
The MediaPlayer always auto play when assigning it a new VideoElement. I'm using OSMF 1.5
Thanks

Hi,
It looks ok. Can you provide the code for createVideoElement as well?
This is the snipet that works for me:
var resource:URLResource = new URLResource("http://mediapm.edgesuite.net/strobe/content/test/AFaerysTale_sylviaApostol_640_500_short.f lv");
// Create the MediaElement and add it to our container class.
var videoElement:VideoElement = new VideoElement(resource);
container.addMediaElement(videoElement);
var mediaPlayer:MediaPlayer = new MediaPlayer();
mediaPlayer.autoPlay = false;
mediaPlayer.media = videoElement;
Gelu

How do I sync contacts between my iMac and Nokia 5233? iSync doesn't seem to have an add-in for Nokia 5233.

How do I sync contacts between my iMac (10.6.8) & Nokia 5233? iSync doesn't seem to have an add-in for Nokia 5233. Any other way? Appreciate any help on this.

hayley7070 wrote:
How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply
What instructions?
In the source list click devices (so far so good) then click the entry for your iphone or ipod. that doesn't exist. HELP asap
You don't import photos from the iPhone to your computer using iTunes.
See this -> iOS: Importing personal photos and videos from iOS devices to your computer
Note this only applies to photos taken with the iPhone. Any photos you previously added to your iPhone using iTunes should be copied from old computer to new computer.

When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.

When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

10.6.2 combined update seems to have no effect

Hello all,
I recently upgraded to Snow Leopard (10.6.0) from Leopard (10.5.8) and everything looked pretty good. However, I've tried to install the "10.6.2 combined update" through Software Update two times now and it doesn't seem to have worked either time. I get no error message, but after my computer restarts the "About This Mac" window still shows a system version of 10.6. Can anyone suggest what might be going wrong and how to fix it?
Thanks!

K T wrote:
Combo update is not available via Software Update.
yes, it is if you are upgrading directly from 10.6. that's exactly what the OP got via software update.

Installed yosemite. CS5 no longer workers. Error message about Java SE 6. But SE 6 doesn't seem to have a MAC version. How can I resolve?

Installed Yosemite on my Mac. CS5 no longer workers. When I try to open Photoshop, I get an error message about needing a Java SE 6. This is different from the other Java update Yosemite required (I already installed that). I assumed the higher update would suffice for previous versions, but I guess it doesn't work that way. Went over to the Java site, but SE 6 doesn't seem to have a MAC version. How can I resolve this?

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

CC 2014 nik efex - My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either

My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either. Help with this?

BINGO !!!!
Thanks so much Woodsroad. I had the exact same problem with my Dell Windows 7 64 bit with AMD Radeon 6700 Video card.
All the video tests passed with flying colors.
The sniffer rename trick fixed the problem.
Thank goodness for the internet!

I have purchased an app from the app store and cannot seem to download it. I have tried restarting, and checked my connection but this seems to have no effect. I have also downloaded other (free) applications since then and some of these download

I have purchased an app from the app store and cannot seem to download it, the download statrs and then rapidly cuts out, it will not complete and seems to repeatedly go over the same few Mb. I have previously downloaded large files and not had a problem with them.
I have tried restarting, checked my hard disk (and repaired a sector of the disk) and checked my connection but this seems to have no effect. I have also disabled virus protection and my firewall to see if this has an effect. I have also downloaded other (free) applications to test it since then and some of these download but not the larger ones. Has anybody else encountered this? Does anyone know how to solve it?

Can you download large files from other places apart from the App store, wondering if it is the App store or your internet connection.
If it just the app store check this url http://www.apple.com/support/mac/app-store/contact/

My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page. I can't figure out the rename function either. Help?

My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page.
I do have a 2008 version of Microsoft Office installed to save money, but that shouldn't affect things. I can't figure out the "rename" function either. Help?

Oh, and I also reset my NVRAM, my computer hasn't frozen again yet, so I'm not sure if it has made a difference.

I'm trying to isolate skin with a secondary layer and am successful. I want to blur the skin to reduce blemishes but when doing so the blur and degrain sliders don't seem to have an effect. Can I apply a gaussian blur fx on just that secondary? Can't see

I'm trying to isolate skin with a secondary layer and am successful. I want to blur the skin to reduce blemishes but when doing so the blur and degrain sliders don't seem to have an effect. Can I apply a gaussian blur fx on just that secondary? Can't seem to figure this out. Is there a better way to smooth skin?

Here's an Adobe help page for isolating skin with suggestion on the use of the blur slider also:
https://helpx.adobe.com/speedgrade/using/apply-secondary-color-corrections.html
And here's one of the original creators of Iridas/SpeedGrade, Patrick Palmer, a six minute vid-tut on using secondaries (specifically in CS6 but this hasn't changed):
http://tv.adobe.com/watch/learn-speedgrade-cs6/secondary-color-correction-in-speedgrade-cs 6/
I'd note, the "blur" and "denoise" tools on the Secondary tab are more about smoothing the keying of the secondary ... they apply a bit of blur or de-noising to make the secondary smoother and cover over the odd pixel or three or four that don't "fit" the key of the secondary in the middle of something you're aiming for.
In current SpeedGrade, I'd try using the Guassian Blur (Range) effect, and sample a good range of the skin tones.
And a lot of people use Red Giant's "Cosmo" plug-in over in AfterEffects or Premiere Pro ... it's a tool designed specifically for working skin tones, dealing with blemishes, wrinkles, spots, and such.
Neil

My IPhone doesn't seem to have a sims card tray. Please help

My IPhone doesn't seem to have a sims card tray. I would like to change the sims card but I can not find the sims card tray. I have looked on the right side and on top of my phone but its not there. I have a Iphone4 and Verizon as my carrier. How do I change my sims? Or can I change my sims card? Please help me I would greatly apperciate it.

The Verizon iPhone 4 is a CDMA phone and as such has no SIM. Ergo there's no way to change a SIM and no way to use the phone with another carrier, if that's what you wanted to do.
Regards.

I bought Photoshop 12/premier package but all I get from premier is the Read Me bit on my computer. The download doesn't seemed to have worked

I bought PS Elements 12 and Premier as a package but the Premier does not seem to have downloaded...All I have is the "READ ME" pages and no programme

Noel elliot
What is your computer operating system, and is it 32 or 64 bit?
At this time, is Premiere Elements 12 listed in Control Panel/Programs as an installation product?
Where did you purchase this Photoshop Elements 12/Premiere Elements 12 bundle - from Adobe as an online download or from an authorized reseller offering the box packing with installation discs? From your "The download doesn't seemed to have worked", I am assuming that this was an online download from Adobe.
On your computer, you should have started with 4 installation files
Photoshop Elements 12. An .exe file and .7z file specific for Photoshop Elements 12...and file targeted appropriately for 32 or 64 bit computer.
Premiere Elements 12. An .exe file and .7z file specific for Premiere Elements 12...and file targeted appropriately for 32 or 64 bit computer.
You double click the .exe first and afterward as indicated .7z.
Each of these products will have its own serial number.
Do you now have those components. If not, then you need to start again with the download to get those files on your computer in order to start the product installation.
Please review and consider. Any questions or need further clarification, please do not hesitate to ask.
Thank you.
ATR

I have a MacBook Pro OS X v.10.9.1 that doesn't seem to have a DVD player installed. Any thoughts on what app would be best?

I have a MacBook Pro that doesn't seem to have a DVD player installed. Any ideas on what would be best for viewing?

Hi
I would try this - from Apple
To burn DVDs - You know that they come in two versions ?
Data-DVDs - to store files (even movie files) onto - Can not be played on any Video-DVD-player.
Video-DVDs - as commersial movie DVDs
Data-DVDs - can be burned directly from DeskTop/Finder (but only one time/DVD - no incremental storage)
Video-DVDs - needs a DVD-authoring program.
• iDVD - is the best possibly for most of us (not avail. from Apple any more)
• DVD Studio Pro - best ever made ? (not avail. from Apple any more)
• Roxio Toast™ - I like (I got, I use - rather often)
• Compressor - $50 from Apple
• Free DVD Creator.app - free from Apple Store (very simple - Quality ?? not sure - looked problematic reg. Interlacing)
• Burn - a free alternative from Internet. Very simple - Just for doing a plain Video-DVD
Burn http://www.digital-digest.com/software/Burn.html
My old note on this - same same:
If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
FinalCut Pro-X which also can burn to DVD but without any nice themes.
AppleMan1958
You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
Free solutions:
Burn - a free alternative from Internet. Very simple - Just for doing a plain Video-DVD
Burn http://www.digital-digest.com/software/Burn.html
Gives a fairly good resulting Video-DVD
Free DVD Creator.app - free from Apple Store
(very simple - Quality ?? not sure - looked problematic reg. Interlacing)
Yours Bengt W

HT1212 my itouch ,1st generation decided to not accept my password and after 3 attempts it told me ipod deactivated try again in 7,170,560,345 minutes any suggestions to something that seems to have taken on a life of its own ?

my itouch ,1st generation decided to not accept my password and after 3 attempts it told me ipod deactivated try again in 7,170,560,345 minutes any suggestions to something that seems to have taken on a life of its own ?

Read this.

SetChildIndex seems to have no effect

Hello, I've searched the googles and this forum extensivley but I can't seem to find what's wrong.
I am trying to set a Sprite's z-index to topmost on mouseOver. In my mouseOver event I am calling:
this.parent.setChildIndex(this, this.parent.numChildren - 1);
If I trace the index of this before and after the call, the index has changed but my sprite still appears to be behind it's siblings.
I am changing the scale of the object on mouseOver as well.
Is there any known issue regarding setChildIndex that prevents it from actually updating the display?

Thank you for the reply, It turns out I had an event listener on my parent object that was doing bad things.
Date: Thu, 21 Jan 2010 21:38:41 -0700
From: [email protected]
To: [email protected]
Subject: setChildIndex seems to have no effect
if all your sprites are within the same clip the easiest thing you could do would be add the eventListener to the contiainer and on the event
function handleOver(e:Event):void{
var do:DisplayObject= e.target as DisplayObject
addChild(do)
>

License doesn't seem to have taken effect

Similar Messages

Maybe you are looking for