License ECC6

Hi,
==>ECC6 SR2 and Oracle 10.2
I SLICENSE installed in the new license.
SAP says success.
In saplicense -show, no license.
But when I try to launch an RFC connection. I get an error when checking license.
I can not configure my STMS for the same reason.

Hi Friend,
You have below details. Pls just check it then u can apply License.
SAPSYSTEM=IDS
HARDWARE-KEY=T1426372044
INSTNO=0020487924
BEGIN=20090520
EXPIRATION=99991231
SWPRODUCTNAME=NetWeaver_MSS
SWPRODUCTLIMIT=2147483647
SYSTEM-NR=000000000311201900
ALL THE BEST
Warm Regards
kesav

Similar Messages

ECC 6.0 IDES License Error

All,
I'm trying to license ECC6.0 IDES and I keep getting an error:
Error when importing the file "C:\E6I_WEBAS.txt" (sy-subrc = 7)
    Message no. SLIC303
Has anyone seen an error like this before? I've been unable to find any related notes. Also, I see this in one of the WP log ...
M *** ERROR => GetAllLicenses: malloc failed; errno=0 (Error 0) [slicch.c     1557]
M *** ERROR => GetAllLicenses: malloc failed; errno=0 (Error 0) [slicch.c     1390]
D *** ERROR => dySaveDataBindingValue: Abap-Field= >TEXT31< not found [dypbdatab.c 510]
D *** ERROR => dySaveDataBindingEntry: dySaveDataBindingValue() Rc=-1 Reference= >TEXT31< [dypbdatab.c 430]
D *** ERROR => dySaveDataBinding: dySaveDataBindingEntry() Rc= -1 Reference=>TEXT31< [dypbdatab.c 137]
Y *** ERROR => dyPbSaveDataBindingForField: dySaveDataBinding() Rc= 1 [dypropbag.c 641]
Y *** ERROR => ... Dynpro-Field= >LICENSE_TABLE-STATE< [dypropbag.c 642]
Y *** ERROR => ... Dynpro= >SAPMSLIC< >1000< [dypropbag.c 643]
I would appreciate any insight any of you might have, thank you.
~TJ

Hi TJ,
normally 75 should work - but I would strongly recommend to upgrade the kernel first ... 75 is the initial delivery and should be patched during installation ...
(even when the problem might persist)
You might want to try the command SAPLICENSE as follows:
(after that you copied the license to /tmp)
saplicense '-install ifile=/tmp/E6I_WEBAS.txt'
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Request License key for Install ECC6

Dear Sir:
I had installed the IDES mySAP ERP 2005, and willing to request a license key from the SAP web page,
but on the step 1 "Select Installation ", there is no ECC6 relative could be choose.
My question is if the installation should be registered by SAP? or should I do something else?
Sincerly need your help.
The information about installed machine is listed below:
Operating System: Windows Server 2003 with service pack 2
Database: Oracle 10g release 2
SAP product: IDES mySAP ERP 2005
Active Hardware Key is R0558308287
We also have an installed Solution Manager system for generating the install key.
Our company name is Everscience Information System Co.
Thanks and Best Regards

Hello Frank,
The first thing to do is make sure that you have an installation number for an ECC 6 system. If you have an installation number for this already then you can request a license for this system under this instalation number on the sap service market place.
http:
service.sap.com\licensekey
However you have said that your previous system was IDES mySAP ERP 2005. If so it is unlikely that the installation number you have for this system is valid for the license for the new system. In this case you need to contact your local contracts department and request the appropriate installation number.
Once you have the installation number you can request the license at the site above. Requesting a license is a self service on the market place.
Regards,
David

Find "System type" for License registration ecc6

Hi
how do i find the "System type" in ecc6?
i need to registration for License .
and if it relevant at all to the license?
thanks in advance

Dear Shani,
System type is nothing but role of your system.
like weather your system is development system, QA system or production system.
So if system is IDES then system type is Training system.
if system is Production system then system type is production system.
if system is QA system then system type is test system.
if system is development system then system type is development system.

How to find and install right java for ECC6 intstallation on AIX5.3

Hello
I wander how to find and install right java for ECC6 intstallation on AIX5.3. I went thruroughly thru note 723909 and underlying 716927, 1008311 and 1039948 notes but I still do not understand.
I guess I should logon to IBM site http://www.ibm.com/developerworks/java/jdk/aix/service.html
where I can choose :
" Java 1.4.2 64-bit "
and then :
"64-bit SDK 1.4.2 base images (at 1.4.2.0 level; in installp format) "->"Base SDK (required)
Java14_64.sdk.tar ((50001920)
then I assume (on AIX ) I should "tar xvf Java14_64.sdk.tar".
then I get extracted "Java14_64.sdk"
Is this ok?
I know on Linux(
from IBM site I downloaded "IBMJava2-amd64-142.rpm"
then I issued
"rpm -i IBMJava2-amd64-142.rpm "
and finally issued
"export JAVA_HOME=/opt/IBMJava2-amd64-142")
What in case of AIX5.3? Could you help me?

I was told to use smitty (just I am not familiar with it). furdermore i do not hace read.me file. the ziped files are:
Java14_64.ext
-rw-rr 1 202 bin    371712 Mar 2 2010 Java14_64.license
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.ja_JP
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.Ja_JP
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.ko_KR
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.zh_CN
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.Zh_CN
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.zh_TW
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.Zh_TW
-rw-rr 1 202 bin   4888576 Mar 2 2010 Java14_64.samples
-rw-r----- 1 root root 67190784 Oct 4 09:53 Java14_64.sdk
-rw-rr 1 root root 77370639 Nov 20 19:36 Java14_64.sdk.tar.gz
-rw-r----- 1 root root 12612608 Oct 4 09:53 Java14_64.source

How to do a Portal License count?

Hi All
We are currently running Portal 7.00 SP13 and it is that time of year where we have to perform our license count. In our ECC6 system we can just going into SU01 and get the information here, however I am not sure if this is the same process in the portal!
Can anyone help?
Thanks
Phil

Hi Phil,
I guess the Portal licences are free with the enterprise suite unless ofcourse you have ESS/MSS for which the count is defined in the SU01 ( licence tab, there is a different licence type for ESS users) in R3.
Regards
Jayesh

SAP License for ABAP

Dear all
We are using ECC6.0. We needed to some upgradation work on our development system. After this, we lost our credentials as hardware key and Expiry date with SLICENSE. It is showing an expired temporary license as Old license and two valid licenses as new licenses. But these valid licenses are not working, so I am only able to log on with SAP*, which cant work for gettin the Hardware key as desired credential. I am also not able to install temporary license as it has already expired.
So can anybody suggest me the way to install new temporary license or any other optional method to solve my issue.
With regards
Virender Sharma

hi,
you can log on to your OS using <sid>adm user if you are using UNIX.
run saplicense command.
>saplicense -get
this command will show you your hardware key. you can also install your new license key using this command.
For more information about how to use saplicense command, just type : >saplicense --help
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com

Connecting to R/3 source system from BI in ECC6.0

Hi all,
We have installed ECC6.0 system recently with two clients say 500 for R/3 and 600 for BI7.0.
we would like to know how to establish connection between these two clients?from BI7.0 >RSA1>Source Systems-->we do not have any source system assigned here(i.e. SAP folder has nothing under it).
Does anyone has documents on this?please share with me.
Regards,
Murali.

Hi Murali,
Following are the stpes to be performed
1)Before any developments create a user ALEREMOTE through transaction code SU01. This user name is to be created in both the BI system and the R/3 system
Enter the requisite details for the same like address, Logon date, defaults, parameters, roles, profiles, groups, personalization and license data. Remember to assign the SAP_ALL and R_RS_ALL in the profiles
You can create the system-generated password by clicking the wizard button.You can also choose the password of your choice. Its important to note that keep the password same for the user ALEREMOTE common for both the BI and the R/3 system.
2) In the same way create another user BWREMO
3) Define the logical system in BI
Click on SAP reference IMG in SPRO Transaction
For BI 7.0 the procedure is different. It is as follows. Click on SAP Netweaver Business intelligence Links to other source system General connection settings, then click on define logical systems.
For the earlier version BW 3.5 and earlier follow the following steps. Then drop down the BW customizing implementation guide. After that Business Information Warehouse Link to other systems  General connection settings then click on Define logical systems
Click on new entries and enter the logical system name and description
Press the New entries button
Enter the client, city, logical system name, currency, and client role. Select the radio button automatic recording of changes and the rest will remain the same. After that click on save and then back and then save again.
4) Define logical system in SAP R/3 in similar way
5)Go to R/3 connection in BW 3.5 or go to ABAP connection in BI 7.0. Then click create.
6)Now create two RFC destinations for BI, one for direct remote login and the other through the Dialog screen.
7Creating RFC destination for BIW.
a.     Create a RFC destination NB1CLNT500 with the name for logical systems. The other destination would This destination would be used for BW  BW interaction. The same would be for theNB1CLNT500_DIALOG.Now click on connection test and there should not be any error. Now check by clicking the Remote Login button and this will take you to the R/3 system.
8.     Creating RFC destination for Dialog
a.     Create a RFC destination with the name of and NB1CLNT500_DIALOG in BIW with the name for logical systems. This destination would be used for BW  SAP interaction.
9.     The process is finished now.
10.     Now your connectivity is successfully established with the R/3 system.
Please assign points if this helps
Thank you,
Regards,
Senoy

SAP GRC Access Control - Compliance Calibrator - License Cost

Dear all,
I have some questions on Compliance Calibrator implementation.
1. Do we have to pay additional cost for the license to implement Compliance Calibrator?
2. Since SAP GRC 5.3 is just released, which one do you recommend? SAP GRC 5.2 or 5.3?
3. What would be the major difference between Compliance Calibrator in GRC 5.2 and 5.3?
Best regards,
Rolando

Hi Rolando-
1. Yes, there lies some license cost and the amount should not as much as taking SAP R/3 license. I am not sure of exact amount but its nominal as compared to other SAP products.
2. SAP always recommend for the latest version available and why not one would go for latest version if you are paying something for that.
Also, it depends on your existing R/3 version and its compatibility. In short run, you can choose per your existing versions but in long run everyone has to move to latest version. Say for example whoever is using SAP R/3 technology with whatever version, they all need to upgrade to ECC6.0 by 2011 with extension upto 2013. I am not sure of any such information about GRC AC though.
3. Some enhancement have been done with CC 5.3. Those features include-
1. Risk analysis for SAP Enterprise Portal and UME
2. BI integration for custom reporting
3. Reporting enhancement features include additional auditor, business manager and IT reports
4. SOD management by exception. Can be integrated with workflow.
5. Import/Export of configuration data
6. Migration scripts
7. Download and print capability on every report.
Some performance improvements-
1. Concurrent risk analysis.
2. batch mode risk analysis
3. Improved memory mgmnt etc.
Hope it gives you now some more visibility.
Cheers!
Ashok

Help on setting up SAP LSO on ECC6 with EP

Hi fellow SAPians,
I would really appreciate if I can receive help on this.
We're currently exploring the SAP Discovery Server. I understand that
SAP Learning Solution has taken over Training Management. Can I ask if
the image provided comes with Learning Portal, Content Player and
Authoring Environment? If they do, may I know how I can activate them
so that they can be displayed in portal? Is there any complete and comprehensive Step by Step SAP LSO 600 documentation that helps? All I could find were for
versions 100, 200 and 300.
I've tried the below pages but they can't be displayed:
http://server:ITSport/sap/bc/bsp/sap/hcm_learning/leso.htm
- Prompted for user ID to Web Application Server (ERP)
http://server:j2eeport/lms/mediator/config
- Page not found
Also, may I know if Learning Portal, Content Player and Authoring
Environment comes as standard with ECC6 and EP7?
Thank you.
Regards,
Damien

Hi Damien,
I do not believe that SAP Discovery Server will have much on Learning Solution. You would not have the Content Player or Authoring Environment.
Much of the LSO 600 documentation is found in service.sap.com. Go to https://websmp202.sap-ag.de/support
Select Release & Upgrade Info/Installation & Upgrade Guide. Under Installation & Upgrade Guides select SAP Business Suite Applications-SAP ERP-SAP ERP 6.0---Installation.
You will find some guides for LSO Authoring Environment, Content Player & Offline Player.
Since LSO 6.00 is part of ERP 6.0 (or ERP 2005), there are additional information in the installation guides under there that you will need to consult.
Additionally, you should consult https://websmp202.sap-ag.de/learningsolution. Under media library, you will find information on the Training management portion of LSO, the Authoring Environment and Learning Portal. There is a Configuration Guide there that is also very useful.
The Learning Portal is included in ECC 6.0. The Content Player which is a Java application needs to be installed separately as well as the Authoring Environment which is a desktop (client) application. But you should confirm with your SAP Account Executive about licenses for using LSO (there is/was a user and author license).
The SAP Enterprise Portal is an optional component and is not part of LSO per say. Customers can run the Learning Portal in their own intranet as the Learning Portal pages are just BSPs that sit in ERP (ECC) and can be accesses via a URL.
You can include the Learning Portal page in the EP using a delivered iView which is really pretty much empty since the pages come from ERP.
If this helps, don't forget to allocate the points.
Cheers,
Danielle

License Type (Standard /NetWeaver)

We are requesting the Product License Key of mySAP ERP 2005 ECC 6 with the SAP Kernel Release 7, Database is MS-SQL 2005 and Windows Server 2003 64 bit.
When we are registering our Product on OSS Portal to request the Product License Key with the SAP Kernel 7 & selecting the Standard License, I am receiving the Product Key with the License Type NetWeaver but I had been selecting the Standard License. Product Key with the License Type NetWeaver is not accepting during the license installation.
Then I do request the additional Product Key with the SAP Kernel Release 6.40 (not our kernel version) with the License Type Standard which is generating the Standard License key and has been installed successfully.
SAP Kernel Release 7, which is our version, Product Key has been generating with the NetWeaver License Type is not able to install in the System.
SAP Kernel Release 6.40, which is not our version, Product Key has been generating with the Standard License Type and has been installed successfully.
We are using ERP 2005 ECC6 which is NetWeaver based might be problem in future,
Does NetWeaver component could be disabled ?
Does NetWeaver Component might not be ADD-ON ?
Does Patches might not be installed successfully ?
I have been obtained the Kernel information from System menu Status.Other Kernel Info where kernel and other information are displaying.
REgards
Anwer Waseem
SAP BASIS

Hi Anwer,
This issue should be handled by Support, not SDN. Please open a message with SAP Support.
Best Regards,
Matt

IDES ECC6 ord other product for consultant ?

Hello,
I would like to know if there is a way for freelance consultant to get a version of SAP ECC6 IDES and/or other SAP Products (SCM, SRM and so on) with something like a special license price ? I mean a legal way to get a complete SAP system for personal training purposes without paying as for a production system ? A kind of partnershp with freelance consultant ?
Thanks for your help,
Regards
Morgan

Hello Morgan,
have a look at http://www.sdn.sap.com/irj/sdn/saprac
Best Regards, Dirk

Duplicate Hardware Key when tried to request for new license key

Dear Experts,
Our SAP ECC6 license key is going expire in these few days. Therefore, I tried to request for new license key with the same Hardware key at SAP Support Portal, but it showed "Duplicate Hardware Key".
Should I wait for the current one to expire before I could request for new one?
Regards,
Abraham

Hi Nick,
It's not a temporary license.
It just when I tried to get a new license key 1 week ago, the installation number we had was just licensed for MaxDB as database server, therefore, it only gave 2 weeks validity of license key.
Now, we have changed our contract licensed to MS-SQL server.
Therefore, I need to get the new license key based on MS-SQL server. Since, I didn't do any reformating on the server, thus, the hardware key is still the same when I tried to get the new license key.
What should I do?
Regards,
Abraham

URJECT - License (Restart Problem in the development system)......

Hi All,
After successfully installing Licence in ECC6, then getting following error when we attempt to re-start.
Faulting application dispwork.exe, version 7000.146.14.41964, faulting module dispwork.exe, version 7000.146.14.41964, fault address 0x000000000003b6af.
The application, E:\usr\sap\SDF\SYS\exe\run\disp+work.exe, generated an application error The error occurred on 09/30/2008 @ 17:17:31.889 The exception generated was c0000005 at address 000000000043B6AF (disp_work!DpVmcCheckDebugProxy)
Please investigate AND let me know.....ASAP.
With Regards,
Lolla.

Hi Brahmankar,
After installing we can able to enter via sap* for installing license.
But after installing when we restart the system then only problem is coming as above.....
please help in this regard.
With Regards,
Lolla.

Do we need ABAP developer license?

Dear people,
we use SAP ECC6.05 and we need to ABAP some different thinks.
Now I wonder if we need a “developer license”? I thought that this license were include into the SAP ECC6.05.
Can someone have an answer about that?
Jan Maalderink

It depends, as always.
The standard case: you don't have an "SAP ECC 6.0" license but instead you have a license for each user. For each user type there are different user licenses for example "professional user" and "developer". For each developer you need developer licenses.
But maybe you have a different license model inhouse...

License ECC6

Similar Messages

Maybe you are looking for