License error connecting to Sap BW from BO InfoView

We installed succesfully the Sap Integration Kit Xi R2 , and the created the universe to connect to Sap BW.
But when we try to access from the BO InfoView to the Sap BW with a proper Sap user we recive an error like that :
"...Unknow user: all the 0 concurrent licenses are in use or the license code is invalid..."
We installed the proper license for the Sap Integration Kit, and the BO is in use and is working well.
We read note 1307794 but seems not usable in our case.
So we do not know wich is the error.
Regards

I'm reading a lot of post in intenernet, but it's difficult to find out wich kind of license is required on BO, if named if concurrent...
We installed the license coming with the Sap Inegration Kit, neverthless we have the error described before.
So we suspect there is something to do with BO licenses, but it's not clear what..
regards

Similar Messages

Host did not respond error in connecting the SAP Router from SERVICE PLACE

Dear Sir,
We renew the Router Certificate by October 2008. We are using broadband connection in our office with firewall (ISA) .
When we try to connect the sap router from SAP Service Market Place, It is connected and after some time, status is changing to Host did not respond due to timeout.
We checked the SAP Router Tab File also. It is correct. Guide us to solve this issue
With Regards
K.Natarajan

Hi
This type of error occurs maximum,only when there is no proper connection between the systems.So,my suggestion is to check with the connection between the systems with the help of Basis person.
regards
krishna

Error While connecting to SAP R3 from crystal reports

Hi Experts,
I am trying to connect to a SAP R3 from crystal reports, it gives below mentioned error.
Logon failed.
Details: CMALLC: rc= 27 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=10.11.12.13, GWSERV=SAPGW12, SYSNR= 12
Location SAP-gateway on host xyz/sapgw12
Error timeout during allocate
TIME Wed Nov 18..
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1872
Detail no connect of TP sapdb12 from host 10.11.12.13 after 20 sec
COUNTER 6
Please help me to solve this error.
Regards,
Ganesh

Hi
please ask your network admins if there is a firewall between your CR Designer installation and your SAP R/3 system.
I assume that you have imported the necessary trsansports in your SAP R/3 system.
Which kind of driver do you use for the connection to SAP R/3?
Regards,
Stratos

Best practice for connecting to SAP backend from JSPDynPage

Hi,
Can anyone help clear up some confusion I have over connecting to SAP from Java?
We have a number of JSPDynPage portal applications on EP7 Ehp1 that connect to SAP ECC6.
We currently use 2 methods to call remote functions on the ECC system.
1) Enterprise connector and JCo Client Service
This method has the advantage of automatically generated proxy classes and typed access to function module parameters. It is also more closely aligned to Web Dynpro from a design time point of view
However it also has a number of disadvantages in that it does not support table APPEND structures and requires regeneration for every change to the ABAP structures involved even if the field that has changed is not being referred to. In addition the use of the JCo client service means that the connection pooling must be handled ourselves explicitly
2) Connector Framework - SAP System Connector
This method has the advantage that connection management is handled by the framework. It also has the advantage that fields are referred to by name so if an ABAP structure changes then the remote call will not fall over as long as the named fields are still available.
However this method is more cumbersome because no proxy classes are generated and function module parameters are referred to generically so errors are not picked up by the complier.
Given the limitations of the above 2 methods, what is the recommended approach?
In the book u2018Inside Web Dynpro for Javau2019 Chris Whealy says the following about the Adaptive RFC Layer:
u2018Any Java program running in the AS Java u2013 not just Web Dynpro u2013 can make use of the Adaptive RFC layeru2019
Has anyone been able to use the Adaptive RFC layer from a NON-WebDynpro java application?
Any thoughts on the above would be most welcome.
Thanks,
Denis.

Hello,
The recommended way is with JCA Connector.
Adaptive RFC is included from NW7.1,
See "Creating an Adaptive RFC2 Sample Application without using Web Dynpro"
in the SAP HELP of NWCE7.1 or NWCE7.2.
Seems to be based in JCo 3.0 and Java5 so it will not work in NW70.
For older Versions like EP 5 there is also a JCo ClientService available.
Regards
Johannes

Error Connecting to TFS 2013 from Oracle PL/SQL using MSSCCI

Hi,
previously we were able to connect to TFS 2008 through MSSCCI.
we have MSSCCI 2013 provider, Teamexplorer 2013 andVersion Control Interface installed.
While trying to connect to TFS 2013 from ORacle PL/SQL Developer 10.5 through MSSCCI ; there is an error coming up when we enter the server url ... it is allowing us only until <tfs home url> without collection...
"The request failed with the error message
<head><title>Document moved></title></head>
<body><h1>Object Model</h1>This document may be found<aHREF=/<Collectionname>/Services/v1.0/ServerStatus.asmx>">http://<tfshome
url>/<Collectionname>/Services/v1.0/ServerStatus.asmx> But the plugin picks it up automatically.. Am i correct?
How to resolve the above error?
Thank you
Su

Hi Su,
Thanks for your post.
How do you manually build your PL/SQL/Oracle projects?
TFS Build invoke MSBuild command to build project/solution on build agent machine by default. If these projects can be built using MSBuild command line manually, then we can use TFS Build(default build process template) to build these projects.
If these projects need be built using another complier, and this compiler support run the command line to invoke it, so you can add the InvokeProcess activity(execute the command line) to invoke this compiler to build these projects in build process template,
then create build definition using this customized build process template.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Connecting to SAP DB from Oracle Database

Hi,
I need to connect to SAP Database which resides in AIX Server from Oracle Server resides in Windows 2003.
My Scenario is for every 15 mins I need to connect to the SAP Database and if Updates happened I need to update my Oracle Table. I need to Update the SAP Database if update is happened in Oracle Database. How do we need to proceed to achive this. We have provided with a SAP user and a Table with it.
Thanks & Regards,
Vijayaraghavan K

Hi,
My Scenario is for every 15 mins I need to connect to the SAP Database and if Updates happened I need to update my Oracle Table. I need to Update the SAP Database if update is happened in Oracle Database.
you need to connect to SAP DataBase and If Updates happened .. in which DB .. ?? SAP or your DB on windows
I need to update my Oracle Table .. In which DB.. ?? SAP or your DB on windows
Any how if it is related to one table in particular go for DB Links which will slove your problem, as per your requirement.
Refer : http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/ds_admin.htm#sthref4108
- Pavan Kumar N

Error Connecting to SAP server via JCO

Hi,
When i tried to connect SAP server using JCO its giving error "Fatal error User name or password incorrect" .But with the same username and password i'm able to login to the SAP system with SAP logon pad. My username contains only numeric,does this have any significance?
Thanks,
Bala

Bala
type of username is not significant if it is correctly entered as same as entered in SAP Logon Tool.
U should configure the JCO Interface properly with connection details
SAP Server
SAP Client
SAP System Number
SAP User Name
SAP Password
Execution - True
Also every fields are very case sensitive, so hv deep look at every field with correction.
Pls tell me the LastErrorMessage using Tracer as follows SAPJCOInterface_0.LastErrorMessage
Regards
Som

Error connecting to planning server from EAS

We implemented Hyperion Planning about 1 month ago. We are having this intermittent issue with connecting to Planning servers. When the users attempt to add a Business Rule, they select an outline, and browse to the planning servers. When they click one of the two servers they get the message "Error connecting to Planning server <<Server A>>". The message only happens on Server A.
I check the planning service, it is running. I login directly to the planning application (http://<<Server A>>:8300/HyperionPlanning/) , it works fine. However I still get the error. The problem comes and goes, but once is happens the only solution seems to be restart all of the services on the Planning server.
Is anyone experiencing this issue?
If so is there a resolution? Is this a common thing with Hyperion Planning?
I opened a TAR, but because the issue is only happening occasionally (1 day in 5) I thought I would try the forums. Any help or suggestions would be appreciated.

Hi,
What version of planning are you running, there was patch 9.3.1.1.1 that addressed
6636367 (8-665086601) When the Business Rules connection to the relational database is lost, Business Rules does not reconnect to it. To solve this problem, an optional property, HBR_CONNECTION_VALIDATE_TIME, was added to HBRServer.properties. This property specifies a time interval for checking the connection between Business Rules and the relational database. If the connection is not valid, a new connection is established. The time interval is specified in milliseconds and defaults to 300,000 (five minutes).
This maybe the same sort of issue you are experiencing.
Cheers
John
http://john-goodwin.blogspot.com/

Restrictive connection to SAP system from J2EE

Hi,
I am using NW04s SP15. I have a webservice defined in stateless session bean. In my web service I am connecting to SAP system and doing some processing. If there are too many invocations of this webservice all DIA workprocesses of backend system gets used up and CPU runs into 100%. Is there a way I can restrict the number of connections to backend specifically for my application? This has to be configurable at customer end. It should be such that if configured number of DIA workprocesses is exceeded then application should wait and connect again. It should not throw any exception.
I do not want something generic for the J2EE engine, but something specific for my application which is deployed on the server.
Any hints/suggestions would be highly appreciated.
Best Regards,
Suparna

Kumar, in addition to the technical connectivity that Sushma is talking about, if you have security considerations SAP GUI supports SNC, which needs to be configured at both the GUI and server to connect securely. I believe this only secures GUI communication, so if you have other connections between the systems you'll need to have additional security.
There are many hardware routers available, at all cost levels, that will allow you to establish a dedicated VPN (virtual private network) and encrypt all communication. On the extremely low-cost end you can also set up SSL port forwarding for all SAP services (ports 32XX, 80XX, etc), but SSL services have to be enabled on both the front-end and back-end servers.
If you're using web services or other HTTP services, SAP supports the use of HTTPS. Those services need to be set up in ICM control (tcode SICF or SMICM, I can't remember off the top of my head).

Error while connecting to SAP Server from Windows XP Client.

Hi,
I am facing the problem while i am trying to connect my Windows XP Clients( With Service Pack 3, DI-API Installed and Microsoft SQL Server Native Client Installed) to SAP server i got follwoing Error.
Connection Failed :
SQL State : '08001'
SQL Server Error : 233
[Microsoft][SQL Native Client]Named Pipe Provider Could not open the connection SQL Server [233].
Connection Failed :
SQL State : "HYT00"
SQL Server Error : 0
[Microsoft][SQL Native Client]Login Timeout Expired
Connection Failed:
SQL State :'08001'
SQL Server Error : 233
[Microsoft][SQL Native Client]An Error has occured while establishing new connection to the server.
When connecting SQL Server 2005, this failure may caused by the fact that under the default setting SQL Server does not allow remote connection.
Regards,
Arpit Shah

Hi Arpit,
Solution of Error in starting B1 after installation should help here too.
Kind regards
Mario
SAP Business One Forums team

Getting Logon Failed error connecting to SAP R/3 with Crystal

I have Crystal Reports 2008 and also the SAP Integration Kit installed on my desktop. I've imported the transports into my DEV and QAS systems and am trying to connect directly to R/3 from Crystal using the SAP Table, Cluster or Function choice.
I receive the error:
Logon failed. Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
I'm using a logon that has full rights within SAP. It recognizes my password because when I try a password that I know is wrong I get a different error message: Logon failed. Detail: Name or password is incorrect. I receive the same error in PRD even though I have not imported the transports into that client.
I have Crystal Server but am not trying to use that at the moment. Just Crystal Reports as a standalone product. If I've left something out please let me know.
Thank you,
Kevin Scheeler

Hi Kevin,
take a look at the Installation Guide for the SAP Integration Kit which includes a detailed list of authorizations per use case in the appendix
the documentation is available on help.sap.com
Ingo Hilgefort

Error connecting to websphere MQ from weblogic 10.3.0 :EndPointFinder

1)     We are in process of connection from weblogic 10.3.0 to websphere MQ series . We are trying connecting to the response queues using MQclient binding . I created .binding file using following configuration
DEFINE QCF(BBNMSRMSConnectionFactory2) QMGR(ESBMBJU2) CHAN(ESBMBJU2_SSL) HOST(bos69872.bst.bls.com) PORT(1414) TEMPMODEL(WEBLOGIC.MODEL.QUEUE) TRAN(CLIENT)
DEFINE QCF(BBNMSRMSConnectionFactory2) QMGR(ESBMBJU2) CHAN(ESBMBJU2_SSL) HOST(bos69874.bst.bls.com) PORT(1415) TEMPMODEL(WEBLOGIC.MODEL.QUEUE) TRAN(CLIENT)
DEFINE Q(BBNMSSERESPONSEQUEUE1) QUEUE(FUSIONQL.BBNMSE.BBNMSTORMS.1_0.D.JU.RSP) QMGR(ESBMBJU1) TARGCLIENT(MQ)
DEFINE Q(BBNMSSERESPONSEQUEUE2) QUEUE(FUSIONQL.BBNMSE.BBNMSTORMS.1_0.D.JU.RSP) QMGR(ESBMBJU2) TARGCLIENT(MQ)
DEFINE QCF(BBNMSRMSCF1) QMGR(ESBMBJU1) CHAN(ESBMBJU1_SSL) HOST(bos69872.bst.bls.com) PORT(1414) TEMPMODEL(WEBLOGIC.MODEL.QUEUE) TRAN(CLIENT)
ALTER QCF(BBNMSRMSConnectionFactory1) CHAN(ESBMBJU1_SSL) SSLCIPHERSUITE(SSL_RSA_WITH_NULL_MD5)
ALTER QCF(BBNMSRMSConnectionFactory2) CHAN(ESBMBJU2_SSL) SSLCIPHERSUITE(SSL_RSA_WITH_NULL_MD5)
2)     The I created the foreign JMS-server as such :
<foreign-server name="ForeignRmsServer-1">
<default-targeting-enabled>true</default-targeting-enabled>
<foreign-destination name="RmsFusionBusRequestQueue1">
<local-jndi-name>RmsResponseQueue1</local-jndi-name>
<remote-jndi-name>BBNMSSERESPONSEQUEUE1</remote-jndi-name>
</foreign-destination>
<foreign-connection-factory name="RmsFusionBusFactory1">
<local-jndi-name>RmsFusionBusfactory1</local-jndi-name>
<remote-jndi-name>BBNMSRMSConnectionFactory1</remote-jndi-name>
<username>m66300d</username>
<password-encrypted xsi:nil="true"/>
</foreign-connection-factory>
<initial-context-factory>com.sun.jndi.fscontext.RefFSContextFactory</initial-context-factory>
<connection-url>file:/opt/mqm/java/bin/mqjndi</connection-url>
</foreign-server>
3)     Subsequently I use the JNDI names configured in foreign server(above) in weblogic-ejb-jar.xml .
<weblogic-ejb-jar xmlns="http://www.bea.com/ns/weblogic/10.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<weblogic-enterprise-bean>
<ejb-name>RMSRespMDB</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>10</max-beans-in-free-pool>
<initial-beans-in-free-pool>5</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>BBNMSSERESPONSEQUEUE1</destination-jndi-name>
<initial-context-factory>com.sun.jndi.fscontext.RefFSContextFactory</initial-context-factory>
<provider-url>file:/opt/mqm/java/bin/mqjndi</provider-url>
<connection-factory-jndi-name>BBNMSRMSConnectionFactory1</connection-factory-jndi-name>
</message-driven-descriptor>
<transaction-descriptor>
<trans-timeout-seconds>300</trans-timeout-seconds>
</transaction-descriptor>
<enable-call-by-reference>true</enable-call-by-reference>
<jndi-name>jms.RMSRespMDB</jndi-name>
<dispatch-policy>JbbosServicesServerXQ</dispatch-policy>
</weblogic-enterprise-bean>
<weblogic-compatibility>
<entity-always-uses-transaction>true</entity-always-uses-transaction>
</weblogic-compatibility>
</weblogic-ejb-jar>
4)     Now when my MDB comes up its giving following error
Mar 8, 2011 10:13:16 AM EST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application
'RMSRespMDB'.
weblogic.application.ModuleException: Exception activating module: EJBModule(RMSRespMDB)
Unable to deploy EJB: RMSRespMDB from RMSRespMDB.jar:
unable to find EndPointFinder for file:/opt/mqm/java/bin/mqjndi
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:493)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
Truncated. see log file for complete stacktrace
java.lang.AssertionError: unable to find EndPointFinder for file:/opt/mqm/java/bin/mqjndi
at weblogic.rmi.spi.RMIRuntime.getEndPointFinder(RMIRuntime.java:61)
at weblogic.rmi.spi.RMIRuntime.findOrCreateEndPoint(RMIRuntime.java:42)
at weblogic.rmi.extensions.server.RemoteDomainSecurityHelper.isRemoteDomain(RemoteDomainSecurityHelper.java:379)
at weblogic.jms.common.ServerCrossDomainSecurityUtil.isRemoteDomain(ServerCrossDomainSecurityUtil.java:319)
at weblogic.jms.common.ServerCrossDomainSecurityUtil.getRemoteSubject(ServerCrossDomainSecurityUtil.java:116)
Truncated. see log file for complete stacktrace
>
My binding file is correctly placed on the following location file:/opt/mqm/java/bin/mqjndi with appropriate permissions
Some info :
Our weblogic version is 10.3.0
I tracked this exception (unable to find EndPointFinder) to bug id 8168598
Can anyone please suggest what can be issue potentially
Thanks in advance

hi,
Even i want to connect webspere MQ 7 with weblogic 10.3, can u suggest me some document where i can follow step by step?
I have too tried using some binding file,but it is not reading the same.

Error connecting to BOBJ server from Power Query

I am getting this error when I try to connect to the BO server from Power Query;
DataSource.Error: SapBusinessObjects: Unable to connect to the remote server
Details:
here it lists my URL which this posts didn't allow me to have.
I know my server is otherwise up and running. No problem connecting to Launchpad or CMC or IDT.
This is the 1st time I am using Power Query. What is missing?
Abdul

Hi,
This is a generic error about not being able to reach the server.
You should make sure that there are no typos in the hostname and to include the port number, which is 6405 by default.
e.g: http://powerquerysap:6405/biprws
Tristan

Error connecting to 8i DB from Jdev 11g

Hi All-
I am trying to connect to 8.1.7 version Database from JDeveloper 11.1.1.4. Am getting error "Unsupported database version".
I google for this error and found the 11.1.1.4 JDBC driver does not support 8i DB, so we need to download the previous version JDBC driver and include it in Jdeveloper library.
Can you please let me know which version of JDBC driver supports connecting to 8i DB, the link to download that and also the steps that I should follow in jdeveloper configuration.
Thanks in advance.
Regards,
Ramesh

Hi All,
I have a similar problem. I need to connect to Oracle database 8i from weblogic server 10.3.5 (Jdev 11.1.1.5).
Where can the 8i compatible drivers be found?
Great thanks in advance.
Regards,
Ansh

How to connect to SAP Database from a Adobe flex application?

Hi
I am an intern currently working on designing an Adobe flex interface that interacts with an SAP Database, although im torn between methods of implementing the most efficient connection without over-complicating the problem. I believe the best approach would be to use SAPJCo but am unfamiliar with how to approach this method and am finding it hard to get detailed documentation or code examples which show connecting to a Database. Another approach would be using a web service but my problems again arise with my lack of knowledge to connect to the Database.
Any advice or help would be much appreciated.
Thanks,
Jonny

Hi Jonathan.
I believe webservice is the best approach, steps to create webservice is very simple.
1. create a webservice from a standard rfc or bapi.
2. release and activate webservice.
3. it will generate wsdl file which can be used in flex environment.
creating webservice.
http://help.sap.com/saphelp_nw04s/helpdata/en/0d/2eac5a56d7e345853fe9c935954ff1/frameset.htm
Consuming ABAP Web Services using Flex :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/emtech/consuming%2babap%2bweb%2bservices%2busing%2bflex
i hope this surely helps.
Venkat.

License error connecting to Sap BW from BO InfoView

Similar Messages

Maybe you are looking for