License error on UBR10012

I am seeing the below error on a UBR10012. The card in use is aUBR-MC20X20V
SLOT 5/0: May 15 17:10:18: %LICENSE-6-VIOLATION: Feature DS_License 1.0 count violation - count = 20, usage count = 40.
SLOT 5/0: May 15 17:11:18: %LICENSE-6-VIOLATION: Feature DS_License 1.0 count violation - count = 20, usage count = 40.
SLOT 5/0: May 15 17:12:18: %LICENSE-6-VIOLATION: Feature DS_License 1.0 count violation - count = 20, usage count = 40.

Hi,
As you can see, the log message reports double amount of licenses in-use (40) compared to license count (20). This is a known issue tracked under CSCtl16221. The issue is still not resolved an the development team is working on it. However, the issue is cosmetic and a LC reload should clear the problem.
Best regards.

Similar Messages

App-V 5 Adobe Creative Cloud (CC) Enterprise Licensing Error 213:19

Hello, I've posted this on Adobe forums but also posting here to see if anyone else has experienced/overcome this issue.
I'm attempting to create an App-V 5 sequence for Adobe Creative Cloud Enterprise software, but I appear to be getting licensing errors when launching the App-V sequence.
From what I understand in Adobe Create Cloud Enterprise, the licensing restrictions which tie the license to the machine have now been removed so that the base packages can be created with serial numbers and can be included within build images etc as opposed
to creating a trial package and then using a serialization file at install/launch time.
To start with I've created a package using the Adobe Creative Cloud Packager tool (CCP) for just the Illustrator CC application which includes the serial number. I've then sequenced this package using App-V 5 SP1.
When I run this app-v sequence on a test machine , Illustrator loads but I end up with a 213:19 error. Looking in the amt3.log the full error is
09/24/13 16:58:35:478 | [ERROR] | | | | SLCoreService | | | 5624 | error deleting bad mkey:
09/24/13 16:58:35:478 | [ERROR] | | | | SLCoreService | | | 5624 | Could not load machine key
09/24/13 16:58:35:478 | [ERROR] | | | | SLCoreService | | | 5624 | License store synchronization took 14.6 ms and return "License Store Access Failure: Machine key cannot be deleted (213:19)".
09/24/13 16:58:35:539 | [INFO] | | | | ALM | | | 5624 | _time_: (func: ALM_License_SilentValidate, duration: 0.078 sec)
09/24/13 16:58:35:539 | [INFO] | | | | ALM | | | 5624 | _info_: ALM_License_SilentValidate return license status: Invalid and error: 213 : 19
09/24/13 16:58:35:539 | [ERROR] | | | | ALMService | | | 5624 | ERROR: License_Check error 213:19. (Errno = 2)
I've tested out modifying permissions on the following folders within the app-v package under root but this has no effect.
C:\Program Files\Common Files\Adobe\Adobe PCD\
C:\ProgramData\Adobe\SLStore
I've also tried creating a package using a trial licence and then using the adobe_prtk.exe tool to serialize the product at launch (startprocess event in userconfig file) with no success.
Anyone tried this or have any ideas?

Hello, thanks for the reply.
I have read those articles (multiple times :-)) I've installed the required c++ redistributables on the sequencer and also on the test machines.
I'm not getting any errors being reported in the App-V eventlogs.
I initially used the adobe_prtk.exe tool to serialize the app-v application at launch via startprocess in the userconfig file as shown. This runs but it doesn't work around this issue.
<UserScripts>
      <StartProcess RunInVirtualEnvironment="true">
        <Path>[{AppVPackageRoot}]\..\Scripts\adobe_prtk.exe</Path>
        <Arguments>--tool=VolumeSerialize --provfile=[{AppVPackageRoot}]\..\Scripts\prov.xml</Arguments>
        <Wait RollbackOnError="true"/>
<ApplicationId>[{AppVPackageRoot}]\Support Files\Contents\Windows\Illustrator.exe</ApplicationId>
      </StartProcess>
    </UserScripts>
Following that I read that AAMEE 3.1 removed the (http://blogs.adobe.com/oobe/2012/09/aamee-3-1or-why-puffer-fish-is-a-delicacy.html) machine to license issue
therefore allowing packages to be created using serial numbers and to be included within build images.
As I'm packaging Creative Cloud (not CS6), I'm assuming this has been carried into the Creative Cloud Packager for Enterprise which now must be used.
Any other ideas appreciated.

Licensing Error 6 After Clean Installing Mac OS 10.8.

I think it might have something to do with the fact that I forgot to back up the Photoshop Elements Library and Application Support files...I can't find any of the stuff they reference in the Licensing Error 6 Troubleshooting guide.
Is there way I can reinstall the application without having to buy it again? Do I need to give Adobe some information or something?
Thanks in advance for the help.

Okay, that never works. PSE isn't a tidy package like most mac apps. The installer strews stuff all over your hard drive like buckshot, most of it in places outside where apple says programs should install things. You will need to download and run this:
http://www.adobe.com/support/contact/cscleanertool.html
Then manually delete all the bits you can find. Don't just check applications, but also hard drive>library>application support, and your username>library>preferences. (Let me know if you don't know how to find these.)
You will need to do a complete install. If you are talking about PSE 10 (which version is this, by the way?), you can download the trial and enter your serial number into that.

Getting a License Error while installing UFT 12.01 trial version

Hi,
I am trying to install UFT 12.01 trial version but its throwing a License error. I am clicking on "Install License" and selecting "Seat License" and clicking on "Next" It says "License Type set successfully".
But next time when i click on UFT icon on the desktop (after restarting my machine) it throws same License Error.
Please find the attached screenshots. Please help me to get UFT installed properly.
Thanks in advance.
Asha

Asha,
You may want to try reposting your question on the forums specifically for the UFT product. Here's the link.
http://h30499.www3.hp.com/t5/Functional-Testing-QTP/ct-p/sws-Fun_Test

Licensing Errors after recovering from Time Machine to an external Hard Drive

My internal HD failed and I'm temporarily using an external drive as my primary HD. I loaded all my data from my time machine backup onto the external drive temporarily until my new mac arrives (next week). Now, I'm getting licensing error code 150:30 when I try to open Photoshop. It says rebooting can fix it. It has not fixed the issue. Any recommendations? I need to work on some files now and am stuck.
Thanks!

Yes. This is very common. Photoshop must never be migrated or transferred, because the license is tied to the Mac and moving it breaks the license.
The cure is simple. Reinstall using your discs and don't forget to apply the updates. You will be starting at 11.0.0.
Gene

I've just installed Mountain Lion 10.8.5, but now the CS programs are giving me a licensing error.

I've just installed Mountain Lion 10.8.5, but now the CS4 and CS5 programs are giving me a licensing error. I've restarted. Uninstalled, reinstalled. And still, they don't work. I need to stay at 10.8.5 and not go to Maverick, per a client's needs at this time. Help!

I've also tried this...that I found in another discussion...also did not work.
Solution 1: Delete the FlexNet Publisher preferences folder
- Quit all Adobe applications.
- On your startup disk, locate and delete the following folder:
[hard drive]/Library/Preferences/FlexNet Publisher/

Weblogic Commerce Server3.5 license Error

I have installed Weblogic Commerce Server3.5 on my Server today. I got the same
error message when i try to start the server.
Aug 21, 2003 10:19:22 AM CDT> <Error> <COMMERCE_SERVER_FRAMEWORK> <W646> <Admin>
<main> <> <> <000000> <LOG_FATAL: WebLogic Personalization Server: Core Server:
3.5 license error.>
I have got a temp license. i copied and pasted in the group of the license.bea
file. Is that the way i do?
Plz let me know what is the solution for this error.
I have installed Weblogic server6.1 with SP5 along with this server
Thanks,
Eshwer

Hello Muffy,
It looks like you do not have WLS 5.1 service pack 6 installed correctly. I
say this because I do not see the sp6 message at the top of your log and I saw
this message in your log:
org.xml.sax.SAXParseException: Element "weblogic-enterprise-bean" allows no
further input; "transaction-isolation" is not allowed
Ture Hoefner
BEA Systems, Inc.
2590 Pearl St.
Suite 110
Boulder, CO 80302
www.bea.com

Photoshop CS4 Licensing error

I'm using my Photoshop CS4 for a long time now but on Tuesday it suddenly crashed saying some Licensing error occured and I have to restart my computer to solve the problem. The restart didn't help. I've read, that there is a License Repair Tool, so firstly I've downloaded that one, trying to repair the product. Nothing has changed. The next step was to reinstall the whole product. I also had some difficulties to remove it, because the uninstaller didn't want to start. After removing it with the Creative Suite cleaning tool and removing the nessecary files the reinstalled progmam showed the same message. Also tried to remove the latest Windows updates installed that day without success. Is there any solution for my problem? I have a CS5 upgrade also installed and it's working, but I prefer the CS4 for some reasons.

I've cleand out, but it just showed me another error message (I think the error 6: configuration error) with both the CS4 and the CS5. So I removed all of them, deleted all Adobe files related to CS4 or CS5 and installed them again. The message is the same (Error 150:30), when I start the CS4, but the CS5 works fine. (I've tried it on another computer and it's working there) How can I make sure the service is running correctly or where can I start it manually?

Dreamweaver CS4 keeps showing a licensing error 150:30. Any ideas?

I am running Dreamweaver CS4 on a MacBook Pro. After a Mac OSX update earlier today Dreamweaver keeps showing a licensing error 150:30 and the only solution on line is not suitable for OS 10.9.5. Any ideas?

The terminal app option worked but after a restart I got the error message again. It worked a second time but then another restart brought me back to the beginnin. Have repaired permissions and tried the other potential solutions. I only use DW CS4 once in a while but I'd love a permanent solution.

CS4 Licensing Error 150:30

After re-installing OS X my CS4 applications are not working.
I keep getting message "Licensing Error 150:30"

The Licensing repair tool does work. OSX 10.7 and above:
Download and open LicenseRecovery111.dmg on your Desktop
Open Terminal and type sudo and leave a space. <do not press "Enter" yet>.
Open the License Folder on the opened LicenseRecovery111.dmg and drag
"LicenseRecover.py" file into the Terminal Window.
The sudo command and path to the .py file should look like the screenshot below.
Press Enter to begin
Type in your password, but know that you will not see dots or asterisks as you type.
Press Enter again, let the script run and finish. You should be able to run Photoshop now.
(If this answer solves it, mark it as "correct" or get back to me if it doesn't.)

Acrobat 9.0 Standard Licensing Errors

I have 11 copies of Adobe Acrobat 9.0 Standard installed in
our office. One of the installations keeps receiving a licensing
error - usually just after a Microsoft update. The error is
"Licensing for this product has stopped working 148:3". I have
uninstalled and reinstalled this product more than once but the
licensing error comes back in a few days. I'm the administrator.
What file keeps corrupting or how can I keep the licensing intact?
Full message text: You cannot use this product at this time.
You must repair the problem by uninstalling and then reinstalling
this product or contacting your IT administrator or Adobbe customer
support for help.

Hi BWhiteC,
Thank you for your post.
You should know that these forums are specific to the
Acrobat.com website and its set of hosted services, and do
not cover the Acrobat family of desktop products.
Any questions related to the Acrobat family of desktop
products would be best suited in the Acrobat Forums:
Link to
Acrobat Forums
Thanks!
Pete

Font licensing error when Saving?

I use Illustrator CC and get a licensing error when saving designs with downloaded fonts.
The designs look fine on my computer and fine when I open them from my drop box account.
The problem comes when others open the design, the fonts change to Arial in most cases, which is causing design issues.
This is even happening when the design is saved as a PDF.
How do I solve this problem?
Can I get licenced fonts?
Where are they available?
Many thanks for reading.

You can have your other contacts download and install the same fonts
or
you can select all the text in your document and create outlines of the fonts, printers often ask for this option.
or
You can purcahse fonts from say Adobe and if I am not mistaken you can have those installed on five work stations, I do not know if you are allowed to consider a colleague as legal user of the fonts. And I do no recall if the number of seats for the fonts have changed but it used to be five seats. As I recall.
or
you can purcahse from My Fonts as well http://www.myfonts.com but again the other contacts ave to have the fonts installed as well check out how many seats for the fonts ypoouare entitled to and if that includes remoe sites for the seats.

Adobe X Standard Licensing error

I am having trouble installing Adobe X Standard on windows 7 machines. I am putting it on a image. It is giving users the licensing error message and to uninstall and reinstall. After we uninstall and reinstall we don't get this message. I used the Adobe Customization wizard to create the install package. Anyone seen this issue before?

We are experiencing the same problem
1.       Acrobat Professional X
2.       Volume License
3.       Windows 7 (x86) Enterprise w/ SP1
4.       Adobe Customization Wizard X
a.       Volume Key
b.      Product registration
c.       Disable EULA
d.      Remove Desktop Icon
5.       Adobe Update 10.0.1
6.       Adobe Update 10.0.2
Create Image with MDT, Capture WIM, Deploy via SCCM OSD. (Note: Items installed via MDT use the SYSTEM account)
Replication Notes:
1)      If you are a local admin you do not experience the problem
2)      If you are a non-local admin and you open a PDF directly (without open Adobe and accepting the EULA first), you receive this error:
Configuration Error
                A problem has occurred with the licensing of this product. Restart your computer and re-launch the application.
                If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
                Error: 213:19
3)      If you login as a local admin, open adobe, accept the EULA, log off, login as user (non-admin), and open PDF file, everything then works correctly. (not an option on several thousand computers)
4)      It appears the transform isn’t applying the EULA portion correctly (on reference computer it definitely did), all other transform options are working correctly (Volume key, prod registration, and remove desktop icon) so the transform is being applied.
Let me know if I can provide any other information. We are able to replicate the issue consistently.
Thank you,
       Tony M.

Adobe 9 PRO Licensing Error

why am I getting licensing errors ever since I updated Adobe 9 pro

Hi TrevorONE,
You might want to refer to the KB Doc : http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html

Failure to Install PSE 7 after gettign licensing error (Vista machine)

Hi,
I was happily using PSE 7 for a few months and then got a licensing error. In a misguided attempt to fix that problem I uninstalled PSE 7 and tried to reinstall it (using the remove program app) and now I cannot install PSE 7 on my machine. When I run the installation program for it, it gets almost all the way through installation and then suddenly the last install screen says that it was unable to install and that my system has not been altered. All you can do is press "finish" and be bummed out that you still can't use PSE7.
Any advice? I think there is probably some artifact that PSE 7 has left on the machine that needs to be deleted to make for clean install environment but darned if I can find anything. If you go to the Adobe folder in Program Files, PSE 7 does not show up anymore. (I also had to remove PSE 6 because it stopped working in all of this, as well. PSE 5 is on my system but I haven't tried to open it).
Open to any and all good suggetions. Many thanks, Deb Whitman

Deb,
This Adobe tech note explains how to manually remove all (or at least most) traces of PSE:
http://www.adobe.com/go/kb405847
Then try reinstalling. If you still get a license error, see this FAQ:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice

License error on UBR10012

Similar Messages

Maybe you are looking for