License Exception Problem Encountered With CDs from Dev2Dev Conference

We just attended a great BEA Dev2Dev conference at which we were each provided
a complimentary BEA WebLogic Platform 8.1 CD with the one-year development license.
After the conference, we were all excited to install the CD and apply some of
the techniques we'd just been shown at the conference. The problem is that we
cannot get the installation to work correctly, as described. We continue to get
"LICENSE EXCEPTION" when we attempt to launch anything.
-- The instruction say the CD would provide the requisite "license.bea" (one-year)
file in our
BEA_HOME directory (c:\bea). However, no such file exists. In fact, that file
doesn't exist anywhere on the system. We tried this on three different computers,
using two different CDs that were provided. One one of the computers, a previous
version of WL7.0 was installed. It was fully de-installed. The third computer
has never had a BEA product on it, so there should not have been any conflict.
-- We used only default settings. OS is WinXP with more than enough RAM and disk
space to handle BEAWL8.1.
-- We used the SmartInstall program that comes with the BEA CD that was handed
out at the conference.
Can you tell us what we need to do to make this product work? Our enthusiasm
from the conference still continues, but frustration is starting to set in.
Thanks,
Doug

Well, as it turns out, the literature is a bit wrong, but the CD is correct.
The literature says the installation program will place a copy of "license.bea"
in the BEA_HOME folder (typically c:\bea). This is not the case. What is the
case is that after you run the installation program from the CD, there is a link
at the very bottom-left corner of the HTML page for you to go out an grap the
license specifically for the installs based on the CDs from Dev2Dev offerings.
"Douglas" <[email protected]> wrote:
>
We just attended a great BEA Dev2Dev conference at which we were each
provided
a complimentary BEA WebLogic Platform 8.1 CD with the one-year development
license.
After the conference, we were all excited to install the CD and apply
some of
the techniques we'd just been shown at the conference. The problem is
that we
cannot get the installation to work correctly, as described. We continue
to get
"LICENSE EXCEPTION" when we attempt to launch anything.
-- The instruction say the CD would provide the requisite "license.bea"
(one-year)
file in our
BEA_HOME directory (c:\bea). However, no such file exists. In fact,
that file
doesn't exist anywhere on the system. We tried this on three different
computers,
using two different CDs that were provided. One one of the computers,
a previous
version of WL7.0 was installed. It was fully de-installed. The third
computer
has never had a BEA product on it, so there should not have been any
conflict.
-- We used only default settings. OS is WinXP with more than enough
RAM and disk
space to handle BEAWL8.1.
-- We used the SmartInstall program that comes with the BEA CD that was
handed
out at the conference.
Can you tell us what we need to do to make this product work? Our enthusiasm
from the conference still continues, but frustration is starting to set
in.
Thanks,
Doug

Similar Messages

When I install itunes 10.5.3 i get a message " there is a problem encountered with your windows installer package ".... and i can't install it

When I install itunes 10.5.3 i get a message " there is a problem encountered with your windows installer package ".... and i can't install it

Have you completed all windows update including service Pack1? If not, please complete all the windows update then follow steps below to re-install all over.
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Does anyone have a link to common bugs/problems encountered with flex 3?

Hi,
does anyone have a link to common bugs/problems encountered
with flex 3, just so i can try and familarise myself before I go
asking etc? thanks folks!!

flex warnings:
http://livedocs.macromedia.com/flex/2/langref/compilerWarnings.html
flex errors
http://livedocs.macromedia.com/flex/2/langref/compilerErrors.html

Two Problems Encountered with FCE

As I was in the middle of editing a sequence, the following message appeared:
"Error: Out of Memory"
I know that ought to be self explanatory, but could someone please elaborate?
Another issue I run into is that on occasion, FCE will unexpectedly quit, whereby I will have to reopen and start from the point I last saved.
I'm curious as to whether these problems encountered are related to me working with multiple projects simultaneously--looking at my Mac's specs, am I operating beyond its capacity?
Thanks.
iMac 2.16GHz Intel Core 2 Duo Mac OS X (10.4.8) Final Cut Express

I often have Photoshop CS, LiveType, SoundTrack, and Safari open at the same time as FCE.
That would explain your out of memory problems. All of them are heavy users of memory, especially PhotoshopCS. Try not to have them running at the same time you're editing in FCE. You can't use all of them at the same time anyway. Photoshop+FCE ...or... FCE+LiveType ...or... FCE+SoundTrack I could see depending on what you're doing, but not all of them at once.

TS1363 Help with Problem encountered with iPod Touch 5th gen After performing Sync.

Hello Friends.
My name is Joaquin. I was wondering if anyone can help with a problem I have encountered with my iPod Touch 5th generation running under OS 7.0.4.
After performing a Sync, a lot of the song in my iPod showed a red icon beside the song. It is the same Circle with a square in the center icon that shows the download progress status that you see when updateing APPs, etc.
The songs play perfectly in my computer library and in an old iPod Classic but not in the iPod Touch. The only difference was that when I connected the iPod I got a message stating something like "Transfer purchases from iPod touch to computer" despite of the fact that I did not make purchases from my IPod.
I will really appreciate the help. I can´t survive without my music. Thank you in advance.
Regards,

Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network. Yes
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before? no
Try the following to rule out a software problem: (Not clear what you did)
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Since it connects to other networks that indicates a problem with your network
Apple Retail Store - Genius Bar

Problem Encountered with Latest (as of 8/2/08) Security Update

I just updated the latest security update both on my powerbook and Mac Pro. My Mac Pro went into an infinite loop upon restart. Powerbook did OK. Did anyone encounter the same problem. I had to power down my Mac Pro and restart again and it went well the second time.

Our household has three Macs, a Mac Pro G5, an old Mac Mini and a Macbook Pro G4, all running Leopard. Two out of the three machines would not work after taking Security Update 2008-005.
The Pro and the Mini would not restart and had to be turned off manually. When switching back on, the Mini kept restarting itself. The Pro would get as far as a flickering blue screen with a spinning daisy chain. Same update, two different problems. Neither could be started in safe mode or from an external hard drive.
The Pro's hard drive was restored using the Leopard install disk and a time machine backup, the Mini had a complete reinstall. They now work perfectly.
I am absolutely positive that the latest security update was the problem.

Problem encountered with Adobe premiere Element 4 et DVD sony Handicam

I have a sony Handycam DCR/DVD203E . Window Vista edition familiale premium service pack 1 .Adobe Première Elements 4 .
I take 10 rushes of 2 minutes each . I finalised the DVD for importing it on my computer under Adobe Elements 4 .
When i do " add médias " , I only get two files , one called VTS_01_1.VOB which is the total of my 10 rushes but it's only one rush of 20 minutes .I get also an error message " C:\users\Videos\20081125\VIDEO_TS... FORMAT ERROR or file correupted/a component needed is may be not installed .
I shoud get my 10 rushes of 2 minutes instead of one rush of 20 minutes film .

Just a few clarifications first. Rushes, are the quick (hence the name rush) optical prints made from cine negative film. Their intention is for viewing, quickly, the results of the previous day's filming. They are not color corrected, or manipulated in any way. They are also not edited, other than being spliced together, take after take, so the crew and decision-makers can see what was captured. These are usually discarded soon after selections are made and decisions are finalized. The original negatives are then cut in the editing process and, when complete, are printed to positive projection stock with color and density corrections. Now, the final output is more often some digital format for commercial distribution.
What we have are 2 min. Clips, in digital capture parlance. However, lets go back a moment to the first paragraph. Just like the negative film stock, this Sony camera shoots to DVD. Just like cine negative, with an editing workflow, something else has to be done. Unlike the negative film stock, the DVD can actually be viewed in an optically correct, albeit unedited, format.
The .VOB files on the DVD are part of the inherent file structure of that medium, the DVD-video and are made up of MPEG-2 (DVD-spec) compressed files with very specific criteria. Unfortunately, the aspects that go into creating an instantly viewable medium, add some problems to doing any editing with it - first there is the structure .VOB, next, the initial compression to MPEG-2. Neither is ideal, if one plans on using an NLE (Non-Linear Editing) workflow. The .VOB structure will have to be converted at some point, and the MPEG-2 compression will have to be decompressed into another format, and most likely, be re-compressed back to MPEG-2, if the final output will go to DVD. Substitute that second MPEG-2 re-compression with Flash, WMV, or whatever, should the intent be streaming media.
Steve has addressed the problem head-on, which is a good way to tackle it. This is intended to just add a bit, to what he has already written, not to correct anything, or change anything.
With the proliferation of more and more non-tape capture devices, i.e. cameras, on the market, one must make a conscious decision, as to what they will ultimately wish to do with the footage captured. While it CAN be edited, with certain limitations, it is first designed to be viewed in its raw form. It handles this last job well - just pop the DVD/mini-DVD into a player and view, or hook the camera directly to the TV (or through other devices attached to the TV) and view. Editing, however, becomes a bit more complex, and needs to be well-thought out, and planned for.
The FAQs, at the top of these pages, go a long way to helping make informed decisions, come editing time. The compromises are outlined pretty well. Yes, there
b WILL
be compromises, as the medium is not designed to be editable in the first place. It is a delivery/viewing medium. This should be a strong consideration, when shopping for a video, or still/video camera. What will I want to do with the material generated by that camera? Do I want to just record and view, or do I want to edit, before the final presentation of the material? If one is here, in the Adobe Premiere Elements (or Premiere Pro) forum, then it is likely that some editing is intended. If one has gone with a tape-based capture device, the editing path is clear - Capture, edit, Export. If one has gone with a HDD (hard drive), DVD, magnetic storage camera, decisions have to be made and some planning must go into the process of editing. Then is the time to learn the proper workflow (will differ dependant on the exact process of capture, that the device uses), and will pay dividends. Learning what compromises will have to be made and how best to keep these to a minimum, will be needed.
The ease, with which these non-tape devices capture the footage, does not belie what lies ahead, should one wish to later edit. They seem so simple - shoot, then view. However, there the simplicity ends. It is later editing, that must be heavily contemplated. These forums, and especially the FAQs (remember, they are at the top of the main pages) are a good place to learn what comes next. The simplicity quickly peels away and a lot of new techniques need to be learned. As Dorothy commented, were not in Kansas anymore, Toto... If one wishes to get good results from the editing of this type of material, they need to be ready to learn. This might also be an instance, where learning by reading (first), is far preferable to learning by doing. It is far less frustrating. One also needs to be ready to dig deeply into their toolbox, which might well contain a lot of extra programs, to accomplish the task, in the best manner. Even for tape-based editing, one can never have enough tools in that toolbox, i.e. 3rd party utilities and programs.
As an aside, I use PEs big brother, Premiere Pro, for my editing. However, I picked up PE as another tool in the process, as it does some things better than big brother does. Never be shy of using the right tools, even if it means that you have to go outside of PE and even Adobe.
Hunt

Problems connecting with database from java API

I've benn using XSQLRequest and I found a problem with
connections, because it can't connect from Java to database, but
if I access to a .xsql it works.
And also if I link to a .xsql first and after that I try to
access to Database form my servlet it works. So I think my
problem is to initialize the XSQLConfig.xml file in OC4J server.
Thanks in advance

Would you provide the way you deploy your XSQL app to OC4J and
how you get JDBC connection using JAVA? I execute the next code more or less:
miXSQLRequest = new XSQLRequest(XSQLQuery.getDOM
(),null);
miXSQLRequest.process(htParamsIn, pWriter, pErrors);
but and it's probabily my mistake I don't get any conecction
from the session or something similar because I thought that
it's made by XSQLRequest, and the XSQLRequest class takes the
default values of the connection pool from the file
XSQLConfig.xml (I put this file inside the lib directory of
OC4J) as the XSQLServlet.
Thanks for your help

Problem Printing onto CDs from Photoshop CS5 - Canon MG6150 printer

I cannot find a solution to this problem anywhere!! I have a Canon Pixma MG6150 printer and have designed a CD/DVD label using Photoshop CS5. The proportions are all correct, when printed on paper from within Photoshop I can cut out the label and it fits my printable media perfectly.
The problem is printing directly onto the CD or DVD using the printer's CD print tray. I cannot get the alignement correct -- the label will only print halfway off the media or more, so only a small section of my label appears on the CD. I have tried various settings from within Photoshop's print options and none work.
How can I get my label design to print onto the DVD or CD? Any help is HUGELY appreciated.
I am running Mac OSX 10.6.5.

I was testing other Imacs running the same photoshop CS5.1 with the new printer drivers from canon and it prints. They are running OSX10.6.8. My new computer is running 10.9.2 and it will not print from photoshop. Is the driver not compatible with the operating system? Is there something to try other than saying the driver is at fault. Do I complain to Canon to update their driver to work? What is a work around?
Thanks,

Problems burningCd with pictures from iPhoto

I am trying to transfer some picures from iPhoto into a CD but I have had probles. First the icons of each picture where one over the other. I do not know how to do transfer the pictures directly from iPhoto in a different way than dragging them into the folder of the new CD whioch also has some folders that should come with it.

Also what print product store are you trying to order from? Give this fix posted by another user a try:
Quit iPhoto.
From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
In your Utilities folder, open Keychain Access.
Find the "NetServices" entry in your Keychain Access window.
Select the "NetServices" entry and press the delete key.
Reopen iPhoto and attempt to place your order again.
You should be prompted to enter your account information if you deleted the Keychain entry successfully.
After entering your account information, you should be able to complete your order.
Also read this Apple document: iPhoto: Difficulty submitting a book, card, or calendar order
OT

WEIRD PROBLEM ENCOUNTERED WITH THE USER IN PRODUCTION

Hi All,
I have a bit weird issue out here to share with you guys also with the interest on the feedback.
In production & the specific user ID:
1. When User logs on with his/her credentials the output expected for the customised object is different with that of Q & D. Version comparison done no issues.
2. When user logs on & click on the display of program in SE38 or duble clicks the program to display in SE80 the entire SAP session logs off.
2. When user logs on with the same credentials on the other machine its OK & merry christmas.
3. When some other user logson the affected users machine its alrite.
4. The transaction which exists for other user throws the status message that it doesn't exists for the effected user on his/her machine.
any feedback/inputs on this?
Thanks & BR.
Vinay.

Hi Vinaya
I had this problem before, and the only way to fix it is, uninstall the entry SAPLogon and try to install it back. Try to install the same version that is working in the other computer.
Please let me know if this helped you!
Regards
Jesus Martinez

Problem Printing with iMac from XP Printer

Just got my iMac yesterday and it runs well. Using the iFelix website someone gave me hear, I set up my iMac to print from an HP Officejet 7310 connected to my windows XP machine. I was able to connect to my workgroup, and computer, and find the printer and connect to it. The driver, however for my computer is not there. I tried the Officejet 9100, and generic print device, and when I print I get the following:
%!PS-Adobe-3.0
%RBINumCopies: 1
%%Pages: (atend)
%APLDSCEncoding: UTFS
%%Title: (M
That prints out on the first sheet of paper, and then about 10 pages go through the printer totally blank, and then it will print that again. Not sure why it says Adobe, I do have Adobe CS 1 installed, could that be interferring maybe?
Anyways, I went to HP's site to download the driver. Here is the site I went to. http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&cc=us&dlc=en&produc t=391182&lang=en
I downloaded the first choice under driver, the "HP-All-in-one printing only web installer for Mac OSX." After I ran the file and it said it installed, I went back into my printer utility in the iMac and went to change printer model for the shown 7310. The officejet 7310 still does NOT show up in the list. I am unsure what to do and am totally lost, as this is my first iMac. Can someone please help me; I need to print quite frequently.

I think I might have figured it out. I went and downloaded something called ES-Ghost Script, Foomatic, and the HPIJS install files. After running ghost script and foomatic, I ran the HPIJS installer here on an iMac at work and when I go to printer utility and select the brand/model, I now see "HP OfficeJet 7300 Foomatic/HPIJS (recommended)" in my choice of model names. When I get home I will have to try this and I hope it works! I am still kind of confused as to why it printed out what it did using a different driver and saying Adobe. I hope CS1 didn't screw up something.

Problem with output from report to excel, calling the report from form 10g

Hi everyone, I'm having a problem generating a excel from a report, which is called from a form, I'm using Forms 10g. The problem is this: My report has a variable number of columns. These columns appear according to data obtained from the database, these columns are dates, In vesion 6 excel file generated shows the columns one after another starting in column A1 to column CP. I mean that the dates are correlative. But in version 10g the excel file generated shows the same report starting in column A to column T, only shows the 20 dates correlative corresponding to this columns, the rest of the dates are down the excel sheet in groups of 20 dates, it's something, the file in 6i grows across and in 10g grows down the excel sheet. The report (rdf file) is the same in 6i and 10g, I compiled the 6i version to obtain the 10g version. The excel sheet generated in 10g looks like the report was in pdf format, because PDF format, cuts the report in pages and the file grows down, if I generate the report in PDF format it has the same structure excel file in 10g has. I hope yo can help because I have days trying to solve this but I have no succes. If someone could help I could email the excel files generated in two versions. Here I put the code I use to generate the files in 6i and 10g. I have tried with DESFORMAT=SPREADSHEET in 10g but the result is the same. Thanks for your help. Greetings for all.
Code for version 6i (Works Very well)
PROCEDURE GUARDAREXCEL IS
pl_id ParamList;
nom_rep varchar2(20);
cla_rep varchar2(20);
cod_dis varchar2(4);
nom_arch varchar2(100);
fec date;
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
cod_dis := :BK_PARAMETROS.LI_COD_DIS;
END IF;
IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
ELSE
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
:BK_PARAMETROS.TI_COD_CLI:='%';
END IF;
IF :BK_PARAMETROS.CLAS_REP=1 THEN
cla_rep := '001';
ELSE
     IF :BK_PARAMETROS.CLAS_REP=2 THEN
          cla_rep := '002';
     ELSE
          IF :BK_PARAMETROS.CLAS_REP=3 THEN
          cla_rep := '003';
     ELSE
          cla_rep := '004';
     END IF;
     END IF;
END IF;
Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );
select sysdate into fec from dual;
IF :BK_PARAMETROS.TIPO_REP=1 THEN
     BEGIN
nom_rep := 'tdvenrli1577.rep';
nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
END;
ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
          BEGIN
          nom_rep := 'tdvenrli1578.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
     BEGIN
                    Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');
          nom_rep := 'tdvenrli1576.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
ELSE
          BEGIN
                    nom_rep := 'TDVENRLI1545.REP';
          nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
END IF;
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
standard.commit;
Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
EXCEPTION WHEN Run_Product_Failure THEN
message('Error');
END;
Code for version 10g
PROCEDURE GUARDAREXCEL IS
pl_id ParamList;
nom_rep varchar2(20);
cla_rep varchar2(20);
cod_dis varchar2(4);
nom_arch varchar2(100);
fec date;
--byt12122007.sn
repid REPORT_OBJECT;
     vURL VARCHAR2(500);
     rep_status VARCHAR2(20);
     vJobID VARCHAR2(100);
     v_rep VARCHAR2(100);
VAR NUMBER;
w_name_repserv VARCHAR2(30);
--byt1212007.en
BEGIN
     --w_name_repserv:=F_OBTIENE_SERVREP;
w_name_repserv:='repserv';
pl_id := Get_Parameter_List('mytmp_params');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('mytmp_params');
IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
     cod_dis := :BK_PARAMETROS.LI_COD_DIS;
END IF;
IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
ELSE
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
:BK_PARAMETROS.TI_COD_CLI:='%';
END IF;
IF :BK_PARAMETROS.CLAS_REP=1 THEN
cla_rep := '001';
ELSE
     IF :BK_PARAMETROS.CLAS_REP=2 THEN
          cla_rep := '002';
     ELSE
          IF :BK_PARAMETROS.CLAS_REP=3 THEN
          cla_rep := '003';
     ELSE
          cla_rep := '004';
     END IF;
     END IF;
END IF;
Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
/*Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );*/
select sysdate into fec from dual;
IF :BK_PARAMETROS.TIPO_REP=1 THEN
BEGIN
     repid := find_report_object('tdvenrli1577');
--nom_rep := 'tdvenrli1577.rep';
nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1577');
END;
ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
BEGIN
     repid := find_report_object('tdvenrli1578');
          --nom_rep := 'tdvenrli1578.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1578');
          END;
ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
BEGIN
     repid := find_report_object('tdvenrli1576');
                    Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');
          --nom_rep := 'tdvenrli1576.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1576');
          END;
ELSE
BEGIN
     repid := find_report_object('tdvenrli1545');
                    --nom_rep := 'TDVENRLI1545.REP';
          nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1545');
          END;
END IF;
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
standard.commit;
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESNAME,nom_arch);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, 'File');
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'DELIMITED');
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, w_name_repserv);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_OTHER, 'paramform=no');
     v_rep := RUN_REPORT_OBJECT(repid, pl_id);
     rep_status := REPORT_OBJECT_STATUS(v_rep);
     WHILE rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED')     LOOP
          rep_status:= report_object_status(v_rep);
     END LOOP;
     IF rep_status = 'FINISHED' THEN
          vJobID := SUBSTR(v_rep, INSTR(v_rep, '_', -1)+1);
          vURL:='/reports/rwservlet/getjobid'||vJobID||'?'||'server='||w_name_repserv;
     END IF;
     WEB.SHOW_DOCUMENT(vURL, '_blank');
     IF NOT form_success THEN
          MESSAGE('Error: PL/SQL held against Button failed to execute');
          RAISE FORM_TRIGGER_FAILURE;
     END IF;
/*Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
EXCEPTION WHEN Run_Product_Failure THEN
message('Error');*/
END;

There are two problems with your VI. First, the basic logic of writing/appending to a file (Excel, TDMS, anything) should go something like this: Open the file, position yourself at the end of the file, then, in the loop, acquire data and write it to the file until you are finished with data acquisition. When you exit the acquire/write to file loop, then close the file. In particular, the opening and the closing of the file should not be inside the loop.
As others have pointed out, writing to Excel might not be optimal, particularly if you are acquiring data at a high rate (and would therefore be writing a lot of data). We actually use Excel in our data acquisition routine, mainly reading from a WorkSheet to get the parameters of a particular stimulus, but also writing the outcome of the response to the stimulus. As it happens, our "acquisition rate" in this example is on the order of several samples per minute, so there's no problem using Excel (we also sample 16 channels of analog data at 1 KHz -- this gets written as a binary file).
Second, if you really do want to use Excel, use the (existing) Excel file to which you want to append as the "template" argument of the New Report function. Then use the Excel Get Last Row function to position yourself at "end of file", as noted above.
Good Luck.
Bob Schor

Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.

Hello Guys,
I am creating resultsource from central admin. If I create it from central admin it works fine. But if I am creating result source from power shell scripts it shows me following error message.
An exception of type 'Microsoft.Office.Server.Search.Query.InternalQueryErrorException' occurred in Microsoft.Office.Server.Search.dll but was not handled in user code
Additional information: Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.
Any suggestion ?
Thanks in Advance.

Hi,
Please provide more specific information about the issue. What type of content source you tried creating via powershell?
Make sure you are using the approproate permission and search service application.
Here is the reference for creating content resource via script:
http://technet.microsoft.com/en-us/library/ff607867(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support

A problem was encountered with one of the files in TestStand\AdapterSupport\LabVIEW directory

When looking at the module for a LabVIEW VI being called from TestStand, I get the following message:
A problem was encountered with one of the files in TestStand\AdapterSupport\LabVIEW directory. Please reinstall it or repair it.
I made the mistake of cleaning up C: in my computer. Cleaning C:\National Instruments Downloads
Why would someone put bits of applications or modules, etc in such a directory?
I am not too crazy about restoring 11GB back into that folder. That's just insane!
Has anyone encountered this before? Any "easy" solutions? apart from re-installing TS...
Side note: I did not touch anything in the \Program Files|National Instruments\TestStand\AdapterSupport\LabVIEW
Solved!
Go to Solution.

Thanks PH,
I also had that. Fixed it.
I will not remove the ones in the NI downloads folder.
I will eventually need to remap everything to the appropriate drive.
I partition the drives into:
C:\     Windows and associated folders. Mostly OS stuff
E:\     Applications (this is where it will end up)
F:\     Files
G:\    Storage
H:\    Backups
I try to do what I normally implement in Linux. I hate sharing the OS with everything else.
Cheers,
RayR

License Exception Problem Encountered With CDs from Dev2Dev Conference

Similar Messages

Maybe you are looking for