$$$$ License Exception when connecting to SQL Server for Weblogic 7.0
Hi,
I downloaded Weblogic 7.0, and installed and uninstalled a few times,
When I tried to connect SQL Server 2000 using the samples in ..\examples\jdbc\mssqlserver4,
I got the error:
Exception was thrown: java.sql.SQLException: $$$$$$$$$$$$$$$$ License Exception
$$$$$$$$$$$$$$$$
jDriver/MSSQLServer4: license signature validation error!
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
I checked the classpath, c:\bea is in there!!
Is any problem for installing and uninstalling a few times on the same computer?
Thanks a lot!!
JH
Hi,
As mentioned in the following configuration article, for earlier versions of SQL Server where MARS was not an option, the way to configure is to have server-side cursors configured.
(check out the tabulated column next to MARS_Connection for details)
http://www.easysoft.com/products/data_access/odbc-sql-server-driver/manual/configuration.html
To use server-side queries in the connection URL, pls go through this link
http://www.oracle.com/technology/products/jdev/howtos/bc4j/bc_psqlserverwalkthrough.html
But please note that server-side cursors does have a performance overhead.
Let me know if you need more information.
HTH,
Lakshmi.
Similar Messages
-
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Login fails when connecting to SQL Server 2008
There were 3 databases and a report server database on sql server 2008 r2. All were renamed. Now, when trying to connect to sql server I am getting a login failed error for default database. I'm guessing because the default db name was changed. How
can I fix this so that I can connect to the db server\instance?
ThanksHi ,
According to your description, I do a test in SQL Server 2008R2. If you use windows system admin account to log in the instance via Windows authentication, even if you change all use database name, you can still log in successfully. However, if you create
a SQL Server login name to connect to instance via SQL Server authentication, when you change the default database name, it will
occur the error which just like at follows .
//Cannot open user default database. Login failed.
Login failed for user '***'. (.Net SqlClient Data Provider), Error Number: 4064//
I recommend you change the default database any existing database on your server like master via clicking on Option , or you can run following statement for username
to replace your original database name with master.
ALTER LOGIN [login name] WITH DEFAULT_DATABASE = master
GO
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Failure when connecting MS SQL SERVER from ODI ! could not load JDBS driver
i have some trouble with connecting MS SQL SERVER from ODI.
I have already downland jdbs driver 3.0 (and 2.0 ) and copy the sqljdbc4.jar to D:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers( where the oracle jdbs driver is already exitst )....but i have this error :
could not load JDBS driver class..
thanksAfter more investigation and even more chocolate, we've identified the problem and it's now working. For anyone else who strikes this problem in future, here's something to check/consider/try:
Even though Squirrel SQL Client was connecting and working ok using the MS JDBC driver (v 3.0), it recorded this in its logs:
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the INTERSECT operation.
We've found that the open source jTDS driver does not have the same issue as the Microsoft one.
We've installed the current jTDS driver, recorded the driver name (net.sourceforge.jtds.jdbc.Driver) and the JDBC URL (jdbc:jtds:sqlserver://<hostname>:1433/<database>) and the connection is now working fine.
Hope this helps other people...
Thanks to those of you who offered suggestions and things to check...much appreciated.
Robyn -
How to create a DSN-less connection to SQL Server for linked tables in Access
hey
i cant understand how i use that Function
if that information what you need
stLocalTableName: dbo_user_name
stRemoteTableName: user_name
stServer :sedo2015.mssql.somee.com
stDatabase :sedo2015
stUsername :sedo_menf_SQLLogin_1
stPassword :123456789
how will be that Function??
please write that Function to me
'//Name : AttachDSNLessTable
'//Purpose : Create a linked table to SQL Server without using a DSN
'//Parameters
'// stLocalTableName: Name of the table that you are creating in the current database
'// stRemoteTableName: Name of the table that you are linking to on the SQL Server database
'// stServer: Name of the SQL Server that you are linking to
'// stDatabase: Name of the SQL Server database that you are linking to
'// stUsername: Name of the SQL Server user who can connect to SQL Server, leave blank to use a Trusted Connection
'// stPassword: SQL Server user password
Function AttachDSNLessTable(stLocalTableName As String, stRemoteTableName As String, stServer As String, stDatabase As String, Optional stUsername As String, Optional stPassword As String)
On Error GoTo AttachDSNLessTable_Err
Dim td As TableDef
Dim stConnect As String
For Each td In CurrentDb.TableDefs
If td.Name = stLocalTableName Then
CurrentDb.TableDefs.Delete stLocalTableName
End If
Next
If Len(stUsername) = 0 Then
'//Use trusted authentication if stUsername is not supplied.
stConnect = "ODBC;DRIVER=SQL Server;SERVER=" & stServer & ";DATABASE=" & stDatabase & ";Trusted_Connection=Yes"
Else
'//WARNING: This will save the username and the password with the linked table information.
stConnect = "ODBC;DRIVER=SQL Server;SERVER=" & stServer & ";DATABASE=" & stDatabase & ";UID=" & stUsername & ";PWD=" & stPassword
End If
Set td = CurrentDb.CreateTableDef(stLocalTableName, dbAttachSavePWD, stRemoteTableName, stConnect)
CurrentDb.TableDefs.Append td
AttachDSNLessTable = True
Exit Function
AttachDSNLessTable_Err:
AttachDSNLessTable = False
MsgBox "AttachDSNLessTable encountered an unexpected error: " & Err.Description
End Functionthanks more thanks for you
look i add that code in form
it worked but i cant add recored why ??
Private Sub Form_Open(Cancel As Integer)
Call AttachDSNLessTable("dbo_user_name", "user_name", "sedo2015.mssql.somee.com", "sedo2015", "sedo_menf_SQLLogin_1", "123456789")
End Sub -
ODBC Slow resonse time when connecting to SQL SERVER on Azure VM
Hello,
I have extra small AZURE VM with SQL Server Express 2008.
I managed to connect to the SQL Server by ODBC connection (from access).
The problem is that the response time is very slow and it is not usable.
How can I improve the response time?
If I will use bigger VM or use AZURE SQL SERVER (instead of installing SQL SERVER on VM)
will the response time be better?
Thank you for your helpHello,
In addition to resoure of the windows Azure VM, the network and the query may also result to the slow response. When create a Windows Azure SQL Database, it also share resources with other services.
You can refer to the following blog about manage connections in Windows Azure SQL Database:
http://social.technet.microsoft.com/wiki/contents/articles/1541.windows-azure-sql-database-connection-management.aspx#GeneralBestPractices
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
I was trying to create external client type but whenever I try to connect to Database server it is showing me error"Access denied by Business Data Connectivity". I have given the Secure Store Target Application ID coorectly and it is setup coorectly.
In BDC service application I have given myself all the permissions( edit,execute,Selectable in clients,Set Permissions) through set metadata store permission option in it.
Please suggest what other reason can be there for the error.
Thanks and Regards
GauravHi Gaurav,
If you have given your account all permissions through setting metadata store permission, the issue should be resolved.
For a better trouble shooting , I suggest you do as the followings:
1. Assign administrators to a Business Data Connectivity service application
Here is a detailed article for your reference:
http://technet.microsoft.com/en-us/library/ff973113.aspx
2. You can try to recreate a Business Data Connectivity service application to test whether it works.
http://www.dotnetcurry.com/showarticle.aspx?ID=794
Best regards,
Zhengyu Guo
Zhengyu Guo
TechNet Community Support -
Error in VS2010 when connecting with SQL Server 2014
I have SQL2014 Express installed locally but it is not detected by VS2010. Why would I need to have the 2008 version?
http://blogs.msdn.com/b/webdev/archive/2010/05/03/visual-studio-2010-support-with-sql-server.aspx
It proably only goes to SQL 2008. I don't recall pointing VS2010 to SQL Server 2012 either.
Maybe, you should post to the below fourm.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio -
No suitable driver when connect MS SQL server from Oracle 10g using JTDS
Hi,
I have developed a java servlet application connection to MS SQL using jtds-1.2.jar. I have try to deploy this application to Oracle 9ias and it works fine.
However, when I deploy the same application to Oracle 10g (10.1.2.0.2), I encounter this error - java.sql.SQLException: No suitable driver.
I have copy the jtds-1.2.jar to Ora10g/jdbc/lib, Ora10g/j2ee/home/lib and also the Ora10g/j233/OC$J_GENERAL/applications/sampleApp/sampleApp/WEB-INF/lib folder, and also setup the data source via the EM interface. The data-source.xml entry is as follows:
<data-source location="jdbc/ess" class="com.evermind.sql.DriverManagerDataSource" xa-location="jdbc/xa/essS" ejb-location="jdbc/ess" connection-driver="net.sourceforge.jtds.jdbc.Driver" username="scott" url="jdbc:jtds:sqlserver://202.xx.xx.xx:1433/sampleDB" inactivity-timeout="30" name="ess"/>
</data-sources>
Is there any configuration that I've forgotten to set?>
I have developed a java servlet application
connection to MS SQL using jtds-1.2.jar. I have try
to deploy this application to Oracle 9ias and it
works fine.
However, when I deploy the same application to Oracle
10g (10.1.2.0.2), I encounter this error -
java.sql.SQLException: No suitable driver.
I have copy the jtds-1.2.jar to Ora10g/jdbc/lib,
Ora10g/j2ee/home/lib and also the
Ora10g/j233/OC$J_GENERAL/applications/sampleApp/sample
App/WEB-INF/lib folder, and also setup the data
source via the EM interface.
Is there any configuration that I've forgotten to set?The JAR file needs to be in a place the container can locate it correctly. This is the applib directory for your OC4J instance.
Which I believe from what you have entered is:
Ora10g/j2ee/OC4J_GENERAL/applib
There's a general JDBC 3rd party driver set of documentation here:
http://download.oracle.com/docs/cd/B14099_11/web.1012/b14012/datasrc.htm#sthref592
This is not using jtds-1.2.jar but it shows how another set of 3rd party jdbc libs are used with the server.
-steve- -
NullPointerException when connecting to SQL Server using FreeTDS
i get this result when i run the code below:
Driver Loaded
Exception- java.lang.NullPointerException
error=null
try {
Class.forName("com.internetcds.jdbc.tds.Driver");
System.out.println("Driver Loaded");
String url = "jdbc:freetds:sqlserver://ws125/pubs";
String user = "sa";
String passwd = "";
Connection con = DriverManager.getConnection(url, user, passwd);
System.out.println("Connection Made");
} catch(Exception ex){
System.out.println("error="+ex.getMessage());
[\code]actually my code is like this:
try {
Class.forName("com.internetcds.jdbc.tds.Driver");
System.out.println("Driver Loaded");
} catch(Exception ex){
System.out.println("error="+ex.getMessage());
try {
String url = "jdbc:freetds:sqlserver://ws125/pubs";
String user = "sa";
String passwd = "";
Connection con = DriverManager.getConnection(url, user, passwd);
System.out.println("Connection Made");
} catch(Exception ex){
System.out.println("error="+ex.getMessage());
[\code] -
SQL Exception while connecting MS SQL DB from Weblogic - URGENT
We are getting lot of errors like this in our server logs.
Let us know how to resolve these errors.
<Dec 11, 2013 3:05:01 AM EST> <Error> <Lease> <BEA-403302> <An unexpected SQL exception occured java.sql.SQLException: [BEA][SQLServer JDBC Driver][SQLServer]Violation of PRIMARY KEY constraint 'PK_LEASE'. Cannot insert duplicate key in object 'dbo.P13N_LEASE'. The duplicate key value is (JobManagerImpl)..
java.sql.SQLException: [BEA][SQLServer JDBC Driver][SQLServer]Violation of PRIMARY KEY constraint 'PK_LEASE'. Cannot insert duplicate key in object 'dbo.P13N_LEASE'. The duplicate key value is (JobManagerImpl).Hello,
WLP Version ?
Emmanuel -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Named Pipes Provider: Could not open a connection to SQL Server
We are running into an error on a SQL request from SQL-IDA to the SQL-IDB server. Both servers are on Windows 2005 with MS SQL Server 2003 SP3.
OLE DB provider "SQL-IDA" for linked server "SQL-IDB" returned message "Login timeout
expired".
OLE DB provider "SQL-IDA" for linked server "SQL-IDB" returned message "An error has
occurred while establishing a connection to the server. When connecting to SQL Server 2005,
this failure may be caused by the fact that under the default settings SQL Server does not
allow remote connections.".
Msg 53, Level 16, State 1, Line 0
Named Pipes Provider: Could not open a connection to SQL Server [53].
It seems to suggest that SQL-IDA cannot find the network path to SQL-IDB. We've followed the steps in this article http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277 but it did not resolve our issue. Is it possible that the MSDTC dynamic port range
should be set to a specific range on both servers?
Any help is greatly appreciated.
AlbertHi Albert,
Can you try to use the SQL Server Management Studio on server ‘SQL-IDA’ to connect to the instance on server ‘SQL-IDB’ to see if it works or not?
There are possible reasons to error 53:
a) typo in the server name, or using "/" rather than "\" between server name and instance name, e.g. "myserver/myinst" is not correct.
b) name resolution to the server name is not correct, "ping -a yourserver" would tell if that's the case
c) The server machine is firewall'ed and file sharing is not in the exception list. You need put "File and Printer Sharing" in exception.
For more information:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server (Microsoft SQL Server, Error: XXX).
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Stephanie Lv
TechNet Community Support -
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
This was originally posted in the SSIS Forum, but a member of the IS team suggested it be moved here. "Most recently I got this error (Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) so does this mean that SQL Server is still trying to use named pipes even if I only have TCP/IP enabled in SQL Server Configuration Manager?"
I'm having the same issue, and here's our scenario:
Installed SQL Server 2005 Developer Edition on a machine with WinXP SP2 and enabled remote connections over TCP/IP
Installed SQL Server 2005 Standard Edition on a machine with Win2003 SP1 (remote connections over TCP/IP enabled by default)
Attempted to 'Copy Database' from Developer Edition TO Standard Edition using 'Detach and Attach' method and recieved the error on the Win2003 machine: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
Attempted to 'Copy Database' from Developer Edition TO Standard Edition using 'SQL Management Objects' method and recieved the error on the Win2003 machine: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
Reinstalled Standard Edition on the Win2003 SP1 machine
Checked all the settings on both machines several times, restarted services etc., and read every post I could find referencing the error.
Same error
Lost my last hair
Thanks in advance,
SteveNan,
Before I get on with this post - thank you for your reply.
The XPSP2 machine actually had the firewall disabled, and I verified that it could accept connections on the the associated ports with the Shields Up utility. I tested this on both machines.
I can connect to the server from the XPSP2 machine, Import / Export, manage, view logs, and do everything EXCEPT get the Copy Database package to run. SQL Server Agent always fails on the last step with the following error:
Event Type: Error
Event Source: SQLISPackage
Event Category: None
Event ID: 12550
Date: 1/10/2006
Time: 1:34:15 PM
User: NT AUTHORITY\SYSTEM
Computer: 401SERVER
Description:
Event Name: OnError
Message: Failed to connect to server BETHESDA.
StackTrace: at Microsoft.SqlServer.Management.Common.ConnectionManager.Connect()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.OpenConnection(Server& server, ServerProperty serverProp)
InnerException-->An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
StackTrace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.Common.ConnectionManager.InternalConnect(WindowsIdentity impersonatedIdentity)
at Microsoft.SqlServer.Management.Common.ConnectionManager.Connect()
Operator: NT AUTHORITY\SYSTEM
Source Name: BETHESDA_401SERVER_Transfer Objects Task
Source ID: {86F355AD-3B74-4D7B-8D2D-C743C790A269}
Execution ID: {91B7C32C-C439-4EDB-8A0F-9F8BF207BC06}
Start Time: 1/10/2006 1:34:15 PM
End Time: 1/10/2006 1:34:15 PM
Data Code: 0
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Have you (or anyone else) successfully executed a Copy Databse task?
Steve -
Dispatcher stopped and not able to connect with sql server
Hi ,
In one of test system disp+work is started and then within no time its stopped.
I am able to connect with sql server 2005 database but while starting sap dispatcher is stopping.
Here is the log of dev_wo
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Jan 05 07:24:02 2012
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' ...
B Library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 11
M sid DE1
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 988
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 988) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 23936 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07F90040, size: 4659000)
M DpShMCreate: allocated sys_adm at 07F90040
M DpShMCreate: allocated wp_adm at 07F91E40
M DpShMCreate: allocated tm_adm_list at 07F97BC0
M DpShMCreate: allocated tm_adm at 07F97BF0
M DpShMCreate: allocated wp_ca_adm at 08366E90
M DpShMCreate: allocated appc_ca_adm at 0836CC50
M DpShMCreate: allocated comm_adm at 0836EB90
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 083EFA50
M DpShMCreate: allocated gw_adm at 083EFA90
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 083EFAC0
M DpShMCreate: allocated wall_adm at 083EFAC8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Jan 05 07:24:03 2012
M ThInit: running on host sugarland
M
M Thu Jan 05 07:24:04 2012
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SUGARLAND\DE1] <> Prof(dbs/mss/server) [SUGARLAND]. Profile value will be used.
C Thread ID:708
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SUGARLAND
C CopyLocalParameters: dbuser is 'de1'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:24:19 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:24:34 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:24:49 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:25:05 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:25:21 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:25:37 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Jan 05 07:25:37 2012
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 988) [dpnttool.c 327]
Please help me on this
Thanks
SrikanthHi Amit,
I restarted the system but dispatcher still in same stage.
Here is the log for dev_w0
========================================
Fri Jan 06 03:41:06 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri Jan 06 03:41:06 2012
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3632) [dpnttool.c 327]
Maybe you are looking for
-
HT204291 Get AirPlay mirroring (or similar functionality) with a cable (not wireless)?
Is there a way to mirror my ipad screen to my macbook pro with just an old fashioned cable? This may sound crazy, but I need to project ipad applications for demonstrations, and I need to be able to do this on corporate networks that don't support mu
-
Hi Gurus , I need some document for Configuring Product Costing ... Please can anybody help me for it . Thanks in advance Regards Shankar
-
Bank Account not getting transferred when employee is created as supplier
Hi, When an employee claims expenses for the first time, a supplier record is automatically created in AP. Unfortunately, when this record is created, it does not import the bank details from the HR record. So we need to insert the bank details again
-
I'm having trouble with CS5.5 with ASIO4All it will only register as 44.1 when the recording is 96. ASIO4All works fine with Audition 3.0 the DAC shows the correct sample rate, but does not in CS5.5. CS5.5 will only allow me to select 44.1 as the sa
-
HT204368 Cannot pair any device, phone like Nokia or else to transfer data, it appears Not pair.
Cannot pair to any cell phon like Nokia or else. It appears Not pair. Even to any other bt device.