License file for Spartan 6 FPGA SP605 / ISE development kit

I have installed the ISE software (ISE Navigator 13.4). I have a voucher that came with the SP650 development kit, device locked to the XC6SLX45T FPGA, which is on this development board. I went to the web and redeemed my voucher, I was expecting an email. This was several hours ago, how long is this supposed to take?
FYI - voucher number is 1586-150702-7E67-097661391
thanks,
Steve

Hi,
If you do not receive your license by mail, you can download it directly from the Xilinx LIcensing Site.
See the Managing Licensing Key files section in Chapter 2 of the following document.
http://www.xilinx.com/support/documentation/sw_manuals/xilinx13_4/iil.pdf
Thanks,
Rajesh
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
---------------------------------------------------------------------------------------

Similar Messages

Missing license file for : WebLogic Server 6.1

Hi there,I just installed the weblogic server and want to test the mssqlserver4 driver. I run the example.jdbc.mssqlserver4.ThreadTests.java. I met this kind of erro message:ThreadsTests - exception java.sql.SQLException: java.sql.SQLException: $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$Missing license file for: WebLogic Server 6.1$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$I do not know why.Philip

Check to make sure that the directory in which you have a valid license file
"license.bea" is included in your CLASSPATH.
-Utpal
"Philip" <[email protected]> wrote in message
news:3ba8e9be$[email protected]..
Hi there,I just installed the weblogic server and want to test themssqlserver4 driver. I run the example.jdbc.mssqlserver4.ThreadTests.java. I
met this kind of erro message:ThreadsTests - exception
java.sql.SQLException: java.sql.SQLException: $$$$$$$$$$$$$$$$ License
Exception $$$$$$$$$$$$$$$$Missing license file for: WebLogic Server
6.1$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$I do not know
why.Philip

Can anyone tell me Why?Missing license file for: WebLogic Server 6.1

Thank you for take a look and give me solution!
Missing license file for: WebLogic Server 6.1
Error encountered:
java.sql.SQLException: Fail to load jDriver/Oracle due to license checking failed!

make sure the folder in which the license file exists, is in the classpath
sree
"Robert" <[email protected]> wrote in message
news:3b57da5e$[email protected]..
>
"Roberto" <[email protected]> wrote:
Thank you for take a look and give me solution!
Missing license file for: WebLogic Server 6.1
Error encountered:
java.sql.SQLException: Fail to load jDriver/Oracle due to license
checking
failed!

"license file for this version could not be found" message when trying to install latest version of Firefox

I keep trying to install Firefox 3.6.10, and it seems to work, but then when it comes time to accept the user agreement, that option is grayed out and I can only go back. In the Software License Agreement box is the following message: "The license file for this version could not be found. Please visit Firefox homepage for more information."

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.<br />
Don't remove personal data when uninstalling.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Your above posted system details show outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.1 r82
# Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

License File for Hyperion Essbase Release 7.1.6.7 Server window

I have to install Hyperion Essbase Release 7.1.6.7 Server windows on window2003. Have been locking for the license file for this version on l"http://licensecodes.oracle.com/hyperion.html". However could not locate the file for the respective Essbase version. Can anyone kindly let me know from where can I download the license file.
Thanks in advance.
Pragati

I think the docs are just out of date/incorrect (fancy that).
Per http://licensecodes.oracle.com/hyperion.html:
Essbase
6.0 - 7.0      11 000000 263A639A-FFE AD52863F
7.1 - 7.1.1      11 000000 463A639A-FFE AF528631
7.1.2 - 7.1.6.3 Click here for options
7.1.6.5      NoneI clicked on the "Click here" link and went to: http://licensecodes.oracle.com/hyperion_essbase.html
And on that page I see:
Alternately, you may download and install Essbase 7.1.6.5 available from Oracle E-Delivery. You can locate this software and corresponding documentation by selecting the Hyperion Performance Management BI product pack and the appropriate operating system. Search results will display the Pre-Version 9 media pack which includes the 7.1.6.5 software. This fix does not require a license file.Note the last sentence -- you are free and clear of license files.
I always wondered where people were getting copies of 7.1.x -- apparently there's a pre-version media pack -- I had no idea.
Regards,
Cameron Lackpour

How to create License file for New ADDON.

Hi,
Can any one tell me steps to create license file for any addon which is developed in VB.NET.
Regards ,
Ganesh

Hi,
The license system for addons is working fine for a long time now. The date of January 2005 now changed to 2007 or 2008 is only the date until when you can work without the AddOnIdentifier (we give some extra time for the addons to migrate to the new system).
If you use the AddOnIdentifier then you have to ask for a LicenseKeyName to SAP to create your solution AddOnIdentifier. Then your clients to be able to run your addon will need a specific license in their file corresponding to your licenseKeyName (when you ask for a license file you can ask for different partners addons licenses). The system is up and running for a long time now.
What problems are you having with it? I cannot see your point.
Regards
Trinidad.
Hope it helps

60 Day License File For IPS

Hi,
if i downloaded a 60 Day License file for AIP SSM , then if i want to remove it after say 30 days and reiuse it for the remaining 30 days some time later , is this possible ?

No it's not possible at all. Evolution license can be deployed only once.

How to configure license file for Memory Leak tool and WL Server 9.2?

(I posted to general JRockit forum before realizing existence of this forum which is probably more applicable.)
Here's our problem:
Running latest version of WL 9.2 MP3 and JRockit Mission Control 3.0.1
Able to run Mission Control, and connect to the WL Server and to run View Console with no problems.
I can't get Memory Leak tool to run because it complains about needing a license file.
First I tried with off the shelf WL 9.2 MP3.
Get error:
A license for Memory Leak Detector could not be found on the JRockit at (1.5) weblogic.Server (192).
Error: Can not find component Memory Leak Detector for JRockit * in the license file. Please check http://www.jrockit.com/license for license updates.
So I downloaded license file from JRockit download site - wls92.zip. It contains several files, but no clear instructions on what to do with these files. I copied one of these files "LIC-WLSP92.txt" to my JRockit home as C:\bea\JROCKI~1\jre\license.bea
Tried again. Restarted WL server. Restarted JRockit Mission Control.
Get error: A license for Memory Leak Detector could not be found on the JRockit at (1.5) weblogic.Server (3052).
The license file does not exist at: C:\bea\JROCKI~1\jre\license.bea
Any advise on how to install license or who to contact for help?

Installed Mission Control 3.0.3.
Got following message when I attempted to run Memory Leak:
A license for Memory Leak Detector could not be found on the JRockit at (1.5) weblogic.Server (192).
Error: Can not find component Memory Leak Detector for JRockit * in the license file.
Please check http://www.jrockit.com/license for license updates.
I believe that we're using the latest downloads of WebLogic 9.2.x and JRockit.
WebLogic is running using 9.2.3 and JRockit build R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-windows-ia2
Contents of C:\bea\jrockit_150_12\jre\license.bea:
<?xml version="1.0" encoding="ISO-8859-1"?>
<bea-licenses>
<license-group format="1.0" product="JRockit" release="*">
</license-group>
</bea-licenses>
Could WebLogic be misconfigured?
Any diagnostics to help figure out the licensing?
Any other ideas?

Device drive of lab view fpga 2013 for Spartan 3E FPGA

Hi NI
I has get labview 2013
but I need FPGA device drive of Spartan 3E
can NI release it for us !!!!!!!!!!!!
best regards
hi ?Q>

T-REX$ wrote:
Hey mangood,
There currently is no support for the Spartan3E board in LabVIEW FPGA 2013, and I am not aware of any plan for developing support in the near future. Sorry for the bad news...
DEAR
i have lab view 2012 and it has device drvie for spartan FPGA
only one year
may be can NI do this its simple
thank
hi ?Q>

Missing license file for: WebLogic Server 6.0

Hi,
You solved your problem, but I still have the same problem when I was using Weblogic
server 6.1 and I try to connect to Oracle 8.17 on my Win2k.
the license.bea file IS in c:\bea, and c:\bea IS included in classpath. the license
for jDriver/Oracle is 5-28.
I do not know why?
James
"kc" <[email protected]> wrote:
>
Hi Jignesh Patel,
I should include the license file in classpath. Thanks you for your help.
"Jignesh Patel" <[email protected]> wrote:
First , check your classpath & your license file must be in your classpath.
Can
you post exact error message ?
Thanks
Jignesh Patel

License file for studio trial install

I just installed Studio (twice) for the 1st time and when I launch the app (from Windows) I see a dialog that says, "The existing license is invalid or expired" and a button to "Import License".
I used to have WLS 8.1 from 2005 but deleted that directory before installing. Any ideas why I'm being prompted for a license file?
Edited by bedfordd at 10/04/2007 9:25 AM

The eval license is generated by the installer. It is placed in the
bea.home directory (usually C:\bea in Windows). All products share the
same license file (licenses are merged in a single license.bea file, it's
an XML file).
See if you can locate it, if not, try re-installing.
On Tue, 02 Oct 2007 17:20:52 -0300, Don Bedford wrote:
I just installed Studio (twice) for the 1st time and when I launch the
app (from Windows) I see a dialog that says, "The existing license is
invalid or expired" and a button to "Import License".
I used to have WLS 8.1 from 2005 but deleted that directory before
installing. Any ideas why I'm being prompted for a license file?--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

Applying new license file for existing installation

Hi experts,
I have installed Sybase ASE 15.7 SP110 Developer Edition (DE) on a VM running RHEL 6.2 for x86_64. Now my company purchased a license for Enterprise Edition and my manager sent me a license file (*.lic). Now I'm wondering if I can apply this new license on my existing installation. If yes, could someone point me to the detailed steps to do that?

re: lmutil lmhostid ...
Make sure you've sourced the $SYBASE/SYBASE.sh script before running lmutil lmhostid; also make sure you've sourced this file before trying to start up your dataserver and backupserver.
re: license 'upgrade' ...
Making quite a few assumptions (eg, this is a unserved license; the manager entered the correct hostid when generating the license; the license is appropriate for your vm in terms of license type and number of licenses; the new license isn't a subcapacity license; etc, etc, etc) ...
If your dataserver is up and running you can use the sp_lmconfig stored proc to change your license information. In particular you're looking to reset the edition type (PE) and license type (LT) settings to match the settings in your new license.
If your dataseerver is down/not-running, you can make the same changes by updating the $SYBASE/ASE*/sysam/<DSQUERY>.properties file. Using an ascii text editor (eg, vi) you want to change the PE/LT values to match what's in your license. [I typically go ahead and remove all of the lines that look like hex code values.] [Obviously (?) make a copy of the <DSQUERY>.properties file before you edit it.]
Where it starts getting tricky is when my list of assumptions are incorrect, eg, manager generated a served licensed (so you may need to setup a license manager), manager used the wrong hostid (in which case the license will need to be turned in and regenerated with the correct info), you've got a subcapacity license (in which case you'll likely need to make some other changes to the <DSQUERY>.properties files ... assuming the correct subcap license tag/id was provided when the license was generated), etc, etc, etc. [And you may want to find a few chickens ... for sacrifices to the SYSAM gods ... just in case.]

I would like to have the new license file for version 2010

Can you deliver me the new license file, compatible with Labview 2010 ? We receive an error, as shown in attachment
Attachments:
01-12-2010_155054.jpg ‏84 KB

A simple license does not include upgrade to newer versions. If you want to keep up to date at all times, look into a SSP subscription. It has many other benefits.
LabVIEW Champion . Do more with less code and in less time .

How do get a license file for SBO8.8 Beta?

Hi All
Where should one go to get a license for SBO8.8 Beta.. I've tried to download a 2007A license but they are not compatible and in license request it is not possible to choose 8.8
Anyone know?
/Rasmus

Yes I know and that is all fair, but then stating that the the Beta is out for SSPs to pretest their add-on don't fit together ... Any Most add-ons need an active license for 1 of 3 reasons:
1 - They have a license component (AddonId) that they need to check against but cannot because of no license present
2 - They check against the license Install No, but without a license there is no install-no
3 - They check the number of pro-licenses in the license (using the license bridge) to validate if you are allowed to run.
Also it seems that a database cannot be upgraded unless a license exits.. That means that we can't test out upgrade of customer databases
Don't misunderstand me.. I very happy to finally have the 8.8 Beta in my hands and I've allready learned a lot today and found a few bug to help you out, but the real test was the add-ons and customer databases (primary to test add-ons again and the Data Achiving function) and that seem not to be possible
I was hoping we could get a full license that lasted the 30 days...
Edited by: Rasmus Jensen on Jun 16, 2009 11:22 PM

Does any one has the Nuance version 9.0.3, 4-ports evaluation license file for share?

try to setup IPCCX8.0 with ASR feature. but do not have Nuance 9 license, I have send the request to Nuance sales. but no reply.

Hi Kevin,
I have the same issue while preparing the CVPI 8.0 training.
The products are no longer available in Nuance Website and no one from the sales answered me !
Any idea ?
Thanks !

License file for Spartan 6 FPGA SP605 / ISE development kit

Similar Messages

Maybe you are looking for