License for Discovery System V3

Hi All,
we want to buy Discovery System V3 but we have a doubt about the license. Infact we haven't any license for MaxDB because it isn't licensed under the our installation number. So we have need a new installation number (such as demo license) and then pay for it. Is it correct?
Thank you in advance?
Regards
Bob

>
Itai Sadan wrote:
> Hi,
>
> If you are licensed for SAP ERP or Business Suite, your account executive can work with the contracting department to make sure that the MaxDB segment is either added to an existing installation number or a new installation number will be created for you. Please note that usage of MaxDB will be provided to you on an evaluation basis.
>
> Should you need further support for the Discovery System please open a CSN ticket on component CA-SOA-DS.
>
> Regards,
>
> Itai
>
> Edited by: Itai Sadan on Jun 16, 2008 4:49 PM
Itai,
How long we can use MaxDB on an evaluation basis?
Thanks
Bala

Similar Messages

Other Database for Discovery System than MS-SQL-Server

Hi,
the discovery system use Microsoft SQL Server which comes with a 180 day evaluation license.
We've an existing licence for IBM-DB2, is it possible to migrate the system to DB2 or use DB2 instead MS-SQL-server?
Best regards
Thomas

Anwered in Licensing requirements for Discovery System

Generating SAP license for DR systems.

Hello,
I have setup the SAP system at DR site as per the Primary systems. Now I wanted to apply the license key to DR SAP systems So can you please tell me the procedure for creating a license for DR servers.

The DR sites are basically created or set up with the same SID (at least in the environments I have worked). I believe that is in your case as well. So you need to check if there a change in the hardware key at the DR site and if yes then you will need to request an additional license based on the hardware key and install it. If the hardware keys remains the same then there is no need to install a license. Also to request a new license you do NOT need to register the system in the market place as the installation number and SID remains the same for the DR site. All you need to do is pick up the system from the installation list and click on the "Edit System" button and enter the hardware key retrieved from the DR site.

Toolbox not licensed for this system (T400s)

Thinkvantage Update found that an update for Toolbox (6.0.5692.08) was there and it was chosen to install it. The old version - which worked ok albeit a bit slow - was uninstalled and the new installed. After starting it from the taskbar it comes with this: "This version of Lenovo Thinkvantage Toolbox is not licensed to run on this system". Which is win7ult64 and the older versions worked fine... ffs....
What does this mean? There is almost 600 days left of guarantee and ThinkUpdate usually works. So is there any other solution than going back to the old version?
The machine in question is a T400s 2815-3SG with 4GB RAM installed by a Lenovo dealer: Only difference to a stock system is that a 4GB SD-card is used by windows as readyboost.
Thanx in advance for your reply!!
Solved!
Go to Solution.

So did I - and that didn't work here... but after uninstalling, a restart, a new instance of Update that found the new toolbox - let it install this (and it did without failures) starting the new Toolbox which found after start that an update was available. Installing this - and 'lo and behold!!! - it worked!!!
So now: Problem solved

License for testing and production systems

Hi Experts
Can any one help me out on implementing license in my B1 System.
According to our contract we have licensed following user types:
User Type
Licensed
AddOn Access License 25
Professional User 5
Software Development Kit - Development Version 20
We have Test/development system in one hardware and Production system on different hardware. Please advice me how to request/allocate license for my test/development system and production system.
We tried creating a Test System in SAP Market place and requested license for test system. While requesting license for production system, it is found that the license is exceeded. In other words, developent system license also counted.
Please advice me on the best practices of B1 license implementation.
Thanks and regards
Ajith G

Hi,
Our customer wants to Keep the production data secure. Developers and consultants should not have the access to it.
Then you have only two options:
1.Either you should maintain a standalone b1 server for the developers and consultants to test their solutions and scenarios.
2.Otherwise you can create users in sql studio for accessing only the test database.
So that as per your requirement
All configurations and sample data will be kept in a test environment where developers and consultants can do their work.Once everything is correct Admin will do the transfer to production.
Note:New users can be created in the sql studio under Databases-><Company Db>->Security->Users, Rt.click new user

Requesting license for two different ssystem with same SID

Hello,
Is it possible to request 2 license for two systems with same SID. The systems are on different machines and their HW key are different but both have same SID. While requesting license, will it permit to create 2 different license with SAME SID.
Regards
Deb

Hi Anil,
The one for which the license is already requested is the main development portal with SID EP2. I have installed one local version of SAP EP with the same SID EP2. Now we need a license for the second system.
If we change the HW key of the original license which is already applied in the main development portal under SMP and apply for a new license for the new local version, can it have any future implications, if any.
What is the best way to deal with the situation. Is there a full proof way to change the SID of the EP system, which I can try in the local EP system.
Regards
Deb

Server 2012 Standard license and VM license for windows instances

Hi,
A question about VM instances on standard server 2012 license exists here
I cannot link it here as my account is not verified. The topic is titled "Windows Server 2012 Standard License and VMs"
My question is tad different...
If I understand this correctly, 1 windows server standard license provides support for 1 Physical Operating System Environment (The VM Host / POSE) and permission to run 2 Virtual Operating System Environment(VOSE).
Does this imply that I can install 2 additional instances of Windows Server 2012 Standard Edition on the permitted 2 VM instances on the server? Or... should I purchase additional licenses for each VOSE that runs windows?
Does the standard license provide rights to run 2 Virtual instances AND offer install and activation rights for 2 MS windows (virtual) environments AND install and activation rights for the windows host?
If license is require for each instance of server 2012 running on the VM ... can I avoid purchasing additional licenses for operating systems, say, if I run 2 Centos operating system instances in 2 VOSE?
Please help!
Thanks.

Licensing questions should be asked of a trained Microsoft licensing specialist. I haven't seen one of those lurking in this forum. www.microsoft.com/licensing.
That said, licenses are assigned to the physical host, not to VMs. The License you assign to the host grants you the "right to run" addition virtual operating system environments running Windows Server. It does not grant you additional licenses.
Licensing for Microsoft Windows Server operating system is controlled by Microsoft. Licensing for any other operating system is not covered by the virtualization rights of the Windows Server operating system. Therefore, if the CentOS virtual machines
are properly licensed by whoever licenses them, you can run however many instances that license allows.
A single Standard Edition license can be installed on the physical host granting you the right to run up to two virtual instances of Standard Edition. However, if you run additional services, such as file services or Active Directory or IIS, etc.,
on the physical instance, that means you can only run one additional virtual instance of Windows Server.
Free advice is worth every cent.
.:|:.:|:. tim

CME required CUBE license for ISP SIP Trunk

Hi,
We have IP telephony setup with CME 9.1 with 2921 ISRG2 router.
Client would like to take ISP SIP trunk.
Do we require CUBE license for the same.Because I tried in the 2851 router without the CUBE license and its working fine.
How I can check CUBE license installed my CME.
When I check license in CME I can see that UC K9 and IPBasek9 license are permanent.
Do this enough for the SIP trunk configuration.
Thanks & Regards
Nithin Louis.

Just to add to George answer - CUBE licenses are somekind "honor" based right now which means you can configure everything and it will work but you need license paper for proving that you have adequate number of CUBE licenses for your system.
Maybe in future Cisco will improve this with option that you will need to install license and only then it will work - like many other licensing right now...
BR,
Dragan

30 day license for Vivado 2015.2 not working

Hi,
Thanks for your answer. Here are the licence file and the report_environment output.
Thanks.
Ango

Hello:
I installed Vivado 2015.2 and then got the 30 day evaluation license.
When I try to run synthesis, I get the following error:
[Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xcvu080'. Please run the Vivado License Manager for assistance in determining
which features and devices are licensed for your system.
When I start the license manager, under "View License Status", it has under "Activation Based Licenses"
VIVADO_HLS
Tools
13-aug-2015
2016.07
Client
NEWCASTLE
Uncounted
0
1
TRUSTED_STORAGE,rod@ariraplatforms,VIVADO_HLS,software,evaluation,_211067444_0_0_964
Why is this license not working for me?
Rod

License for SAP Portal (SAP NetWeaver 7.0)

Hi!
We successfully installed SAP NEtWeaver 7.0 with SAP XI/PI and applied a permanent license for this system.
Furthermore the SAP EP has been also been installed with other SID.
Do we need for SAP EP also to order a second license because the current temporary license is only 30 days valid?
Thank you very much!
Thom

Hi!
Is it not in package with SAP NetWeaver 7.0?
I mean is it free of charge when I already installed SAP NetWeaver 7.0 with SAP XI and ordered for SAP XI a permanent license.
Thank you!
Thom

SQL Server 2005 collation type for the Discovery System?

Greetings,
The SQL Server 2005 Eval 180 day license expired on our Discovery System. I un-installed the Eval copy and installed a licensed SQL Server 2005 EE instance. I searched for the SQL Server collation, and found SAP Note 600027, which recommended Binary order for use with the 850 Multilingual Character Set as the collation.
I attached the existing databases using the script provided with the Discovery system. Started up the SAP ERP instance. I then tried to log into the ERP 300 and got a START_CALL_SICK error message. From the error message details I find, "DB CHECK Wrong Server collation. Perform SQL2005 after upgrade steps. Please see note 126973". Note 126973 seemed to refer me to note 799058. However this talks about upgrading....
It appears to me I simply chose the wrong SQL Server 2005 collation type when installing the licensed coipy of SQL Server.
What collation type should be used?
Thanks,
Jay Warling

After reviewing what I did, it appears I neglected to detach the databases before un-installing SQL Server 2005 evaluation copy.
I did stop the ERP system via the SAP MMC before un-installing but did not detach the databases.
I believe the collation is actually correct, but I am stumped as how to proceed with the START_CALL_SICK error message.
Any ideas?
Thanks,
Jay

Hello, I own a license for Adobe CS5 Production Premium and Adobe CS4 Design Premium for Windows/PC. I am switching to an OSX/MAC system. Is it possible to transfer my licenses to the new platform?

Hello, I own a license for Adobe CS5 Production Premium and Adobe CS4 Design Premium for Windows/PC. I am switching to an OSX/MAC system. Is it possible to transfer my licenses to the new platform?

It's possible to transfer licenses but it must be done by contacting a Customer Service representative by phone or web chat. They'll probably have you submit a form.
Contact Customer Care

I just purchased a license for LR 5 (received via reseller, DVD in Box) and wanted to use the serial on the downloaded LR5 version through Creative Cloud. System sais "The serial number you entered is invalid. Please try again. If problem persists contac

I just purchased a license for LR 5 (received via reseller, DVD in Box) and wanted to use the serial on the downloaded LR5 version through Creative Cloud.
System sais "The serial number you entered is invalid. Please try again. If problem persists contact Customer support".
I have tried several times, without success. Internet connection is working.
Thanks for your help.

If you have a DVD version then you have to use the serial number that is associated with the DVD version. A Cloud subscription number has no relationship to a DVD serial number.

CPS licensing for all the PRD systems

Hi
I have gone thorough the blog that relates to the CPS licensing, i haven't got the clear view that how this licensing stuff works for my scenario..so kindly assist me with the below scenario...
There are 4 systems for my client like SAP R/3, SAP CRM , SAP B/W and SAP Soltion Manager, now we are planning to go for CPS Tool in order avoid the pitfalls in our batch procesing.if i want to run CPS on all the production systems i mean to say 4 production systems how many server processers are required..and agents and adopters are required, and please sensitize me in terms of Agents , adopters and Server processes like what exactly they are, and for my R/3 Production system they is 1-CI(central Instance) and 4 APP servers , and for Solman there is only 1-CI and for CRM only 1-CI and BW there is 1-CI and 1-APP server , all our systems are running on Windows server 2003 and 2008, even we are planning our CPS to be on 2008 and SQL 2008..so kindly advise me in terms of the licensing like how many adapters and how many agents and how many server processers are realy required. is it required to pay anything in order to integrate CPS with Solution Manager...Thanks.

Hi Phaneendra,
CPS has a very simple licence model. The only licensed item on the SAP price list is called a Process Server.
For each SAP instance where you want to control jobs you need a CPS Process Server. In your case: R3, CRM, BW and Solman is 4 Process Servers.
Then you need to look at any non SAP events that you want to monitor or control. Like maybe an FTP file event or some data load comming from a non SAP application. On every server where you have these non SAP events you need to configure an additional Process Server.
Every Process Server includes a license for 1 Production environment and 3 non production environments (dev, test, fail over)
For the Solution Manager Adapter you do not require a Process Server License but if you have Solution Manager events that you want to control you have to configure a Process Server.
Does this answer your question?
Let me know if you need additional support.
Regards,
Richard Lock, Redwood Software.

I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please

I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please someone give me a solution for this. the book is expensive and i don't want to lose it. Please help.

I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please someone give me a solution for this. the book is expensive and i don't want to lose it. Please help.

License for Discovery System V3

Similar Messages

Maybe you are looking for