License for SAP Portal (SAP NetWeaver 7.0)

Hi!
We successfully installed SAP NEtWeaver 7.0 with SAP XI/PI and applied a permanent license for this system.
Furthermore the SAP EP has been also been installed with other SID.
Do we need for SAP EP also to order a second license because the current temporary license is only 30 days valid?
Thank you very much!
Thom

Hi!
Is it not in package with SAP NetWeaver 7.0?
I mean is it free of charge when I already installed SAP NetWeaver 7.0 with SAP XI and ordered for SAP XI a permanent license.
Thank you!
Thom

Similar Messages

How to apply license for SSM 7.5 & Netweaver CE 7.1?

How to apply license for SSM 7.5 & Netweaver CE 7.1?
My application server java in SAPMMC: appear message: no valid license found.
Acually we already bought license and download,
So, how to solve this license problem?

Chamnap,
When your NetWeaver license expires, it can be restarted, but will only run for 1/2 hour, to allow installing a new license.
Step 1- Start NetWeaver CE from the control console
Step 2 - Log on to NetWeaver Administrator http:///[server]:50000/nwa and go to Configuration tab then Infrastructure sub-tab, then Licenses
Step 3 - Make note of your System Number and Active Hardware Key in the System Parameters section
Step 4 - Navigate to the Service Marketplace http://service.sap.com/licensekey
Step 5 - You are looking for SAP Business Suite - SAP Products with ABAP Stack, Without ABAP stack (WEB AS Java-J2EE Engine) SAP Enterprise Portal link
Step 6 - Fill in your Hardware Key and System # - Make sure you choose this License Type: J2EE Engine - Web Application Server Java (it is not the default selection)
Step 7 - A message at the bottom of the page will note a new key has been generated and you can Download the txt file needed (you also receive an email with the info as well)
Step 8 - (Restart NetWeaver CE - if its timed-out) On the Licenses page of nwa click Install from File > Browse to the txt doc you downloaded and ADD
You now have the new license install. Make note of the date to schedule the time for any future updates, so that service is not interrupted.
If you cannot access the license key on the Service Marketplace you will need to contact your SAP account representative.
Regards,
Bob

Wich oracle database i need to buy(license) for oracle portal

wich is better oracle database i need to buy(license) for oracle portal (10g)

Hmmm... I'm not too sure. But we use 10.1.4.
Try contacting your nearest Oracle reseller I guess!

How to install license for expired SAP J2EE engine?

Hi,
I had used evaluation copy of the SAP J2EE engine. This copy works for few days and now the SAP J2EE engine is stopped. After its expiration, we purchased the permanent license.
My question is: <b>how to install license for the expired SAP J2EE engine so that the engine can be started without re-installation?</b>
Waiting for the reply.
regards,
Anand

Dear Anand ,
To install license of the J2EE Engine :
In the Visual Administrator -> Server 0 -> Services -> Licensing Adapter. Then choose tab page Runtime -> Installed Licenses and Install subsequent temporary license.
check the URL for further details :
http://help.sap.com/saphelp_nw70/helpdata/en/14/5e533e5ff4d064e10000000a114084/frameset.htm
Hope this will help you resolve issue .
Regards ,
Santosh

SAP Portal unable to recognize AD requirement to change initial password

Hi,
We configured Active Directory server (2008 R2) as UME for SAP Portal (Netweaver 7.01 SP7). We matched as many of the security parameters as possible* (ex. minimum password length, require one number in password, etc.). The AD parameter "User must change password at Next logon" is set ON. However, upon attempt to login to SAP Portal with the initial password that was set in AD we are not prompted to change the password. Rather, the SAP Portal logon attempt fails with message: "Authentication Denied"
Has anyone dealt with this problem before?
Other information:
*Our MarketPlace researched indicated that the SAP Portal parameter "ume.ldap.security_policy.password_change_required" (which would correspond to the AD parameter mentioned above) is no longer an available parameter for our SAP Portal version (Netweaver 7.01 SP7).
In our version of SAP Portal, the AD parameter "User must change password at Next logon" has one parameter which is similar, but does not directly correspond. The SAP Portal parameter which we do have is "No password change required". Notice this is the logical opposite of the AD parameter: AD says to require the password, whereas SAP Portal says it's NOT required. Therefore, when the AD parameter is set to ON, this results in the Portal parameter being set to OFF. Even still, we face the login failure.

You have to note here that implementing SAP IDM is only ONE of the possible options you have. The implementation of IDM in itself is a huge undertaking because of the number of systems and the decision making process involved with it.
In one of my previous implementations, when SAP IDM was not around, we had Tivoli Access Management tools which took care of the password problems.
even though we implement IDM and deploy IDM UI on Portal , still user should change password before it expires on AD right ?
Even with IDM in place, user will not be able to login to SAP portal with an expired AD password. However, in our case, we provide a link on the logon page of SAP portal to the IDM password self service application which will allow the user to change the password.
Does IDM has any feature like sending notifications before password expiration period ?
I don't think it does - however I have not explored this option in IDM since most of our users do not have email addresses and we cannot send a reminder. You should be able to create a task (with some customization) in IDM to achieve this.
Also will the IDM implementation help us in creating users with option "User should change password at next logon" on AD ?
Yes - IDM does create users with option "User should change password at next logon" in AD.
With IDM in place and tied to AD, it should be the central place of creating users. It is recommended NOT to create or manipulate the users in any target systems (SAP, AD, etc). IDM should be taking care of all the user provisioning activities.
is this like a work around to allow users to change password from Portal before it gets expired on Active Directory(AD) ?
This is not a work around - it is rather a full blown identity management solution for all your company needs.
You will get a lot of your IDM specific questions answered in the Identity Management forum.
Thanks,
Shanti

Licensing & Installation Concept in SAP

Hi Gurus,
Our company has purchased a complete Software Package of Netweaver 2004s SR2 with ERP 2005 SR2, IDES ERP 2005 SR2, SRM, CRM, SCM, Solution Manager 4.0
We've already installed the IDES ERP 2005 SR2. Now my question is as you all know we have been given one Installation number & the customer number. So with the same software how many total systems can we install, Do we have to apply for the license for each installed SAP System. Also do SAP charge for each License. Also when we create any users in any client in a system, do we need to pay for that aswell, also what about the development users. In short I'm looking for the Installation & Licensing concept in SAP.
Thanks & Regards,
Nitin Goyal

You must apply for a separate license for each system, however based on the agreement with SAP you can have multiple systems i.e Multiple Utilization means the installation of the Software on more than one Designated Unit for Productive Use, or the setting up of more than one Application Database on one Designated Unit for Productive Use. Multiple Utilization of the Software may subject Licensee to payment of additional license fees.please read End User License Agreement on this if you have a copy with you or with IT/business.
There can be many license types as negotiated by the Business with SAP. You need to discuss with your IT/business group what type of licenses were negotiated and what defines each type of user? Then you can set the user accounts properly.
For each license you have to send the SAP audit report(system generated) with the required inputs yearly once which will be evaluated by SAP.Only users created in productive client will be charged, the users license applies to the development users also.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTSL/BCCSTSL.pdf
-Unique System Number (New as of SAP Web AS 6.10)
http://help.sap.com/saphelp_nw04/helpdata/EN/a7/512c6e407a11d1893b0000e8323c4f/frameset.htm
You have got advice to contact SAP because the info you are seeking is more of confidential and based on customer to customer.
Thank you,
Shyam

Wiki in SAP portal

I know that we can create WIKI in sap portal (using Netweaver 7.0). can anyone, please, confirm that and send me a link in how to configure/create Wiki into the portal.
Thank you

Hello,
i have installed a EP 7.3 and i want test the wiki integration.
Which usagetype must be installed to use the wiki-system.
I have installed the following usages:
NetWeaver      AS      Application Server Java Extensions       Application Server Java Extensions
NetWeaver      EP      Enterprise Portal      Enterprise Portal
NetWeaver      EPC      EP Core - Application Portal      EP Core - Application Portal
NetWeaver      BASIC      Application Server Java      Application Server Java
NetWeaver      NW-MODEL      NW-MODEL      NW Product Description
Best Regards,
Kai

SSO from non-SAP to SAP apps

Hi All,
Currently We have SAP applications, non-SAP applications(java, .NET, PHP etc) in our landscape.
If the client tries to access any non-SAP application it should ask for authentication and thereby for any subsequent access to any URL's(SAP or NON-SAP apps) it should not ask for any authentication.
FYI:
The client logins into SAP Portal(SAP to NON-SAP) first and thereby able to achieve SSO for non-SAP applications as well.
Currently we are stuck for the scanerio of Non-SAP to SAP apps ?
Please suggest.......
Thanks,
Mano.

Hi samuli,
Using SPNEGO, we can incorporate windows authentication for SAP Portal ( after desktop authentication user can logon without userid/password). But for non-sap apps this would be challenge.
I have another option, using webdispatcher if we enable server redirect for all applications(SAP & NON-SAP) and get authenticated centrally by which SSO can be achieved across all the apps.
Would above solution work ?
Thanks,
Mano.

Execute Webdynpro4Abap Application with same ERP-User for all portal-users?

Hi,
is it possible to let a Webdynpro4Abap application run with only one ERP-User for all portal-users? Therefore not needing an ERP-license for every portal-user?
Somekind of mapping maybe?
Regards
Jan

Jan,
It is possible but it all depends on the type of application .If you want to show same data for all users you can use one user but if data is different for all users then you cannot go with this approach.
to configure single backend user for your application go to tcode SICF and look for that application and go to logon data tab by double clicking and give one common user details
Thanks
Bala Duvvuri

License for sap netweaver 7.0 abap trial version not availble on given link

Hi ALL,
I install sap netweaver 7.0 abap trial version almost three or four times and every time when i try to obtain a 90 days license for that by the link given in the installation guide, the sap system only shows only two options MBS for windows and CST (something like that) for linux.
But my problem is that abap trial version is working on NSP system. it did'nt take the license obtain by MBS.
Please suggest me what to do next or provide solution for my problem.
Regards,
Bhuvnesh

Hello. Read this /thread/948887 [original link is broken]
Regards.

How to apply sap license for Sap Netweaver AS Java

Hello guys,
May i know how to apply sap license for SAP Netweaver AS Java? Appreciate the reply, thank you
regards,
wei how

Hi Lee,
check below link:
http://help.sap.com/saphelp_nwce10/helpdata/en/9f/5e533e5ff4d064e10000000a114084/content.htm
Thanks
sunny

Problem in obtaining License for SAP NetWeaver 7.0 - Java and ABAP Trial???

Is not available to license N4S at [www.sap.com/minisap], what is happening?
Thank you for help!
Rafael.

HI,
did you check following?
/thread/948887 [original link is broken]
regards,
kaushal

Bex query crash for a user on sap portal

hi gurus ,hope this thread match here...
i have a bex query which users see it through sap portal, i have the case where a user X has made some drill down between rows and columns of the query (over portal), and since then every time this user X open the query, portal shows the query on the rows-columns format that the user X used once.
What can i do in order user X see que query (on portal) in the default rows-columns??
This problem just happen with user X, others users see the query in the default format with no problems.
I ve tried deleting the portal personalization for user X on sap portal, but the problem persists...
suggets?
regards..
joker

Hi Arjun
Please check the SAP portal and BI system version and then check the compatibility for BEx Query in IE9.
Refer to http://service.sap.com/pam >> Click on SAP Netweaver version, here you can find the PDF files.
BI (BEX Web) is supported on IE9 with SAP porta version 7.0 SPS24 in vista or windows 7 if you SAP portal version is 7.0
Best Regards
Arun Jaiswal

SAP Portal user license

Dear All!
I am trying to dig for SAP's policy about SAP Portal user licensing... Is there any document or does anybody know how SAP deals with portal users' licensing?
Moreover, is it legal to map multiple portal users against single backend (SAP ECC) user? If yes then is there any limit to it?
I am waiting for the response.
Regards,
Muhammad Abdul Qawi

Satish,
I read your post regarding your check on EP - R3 License. I'd like to know more about your check.
In our region, we hardly find any clear response on this issue.
My scenarios is typical : Many User Account in EP UME (either local db or link to AD), and we have lots of custom Web Dynpro application using JCo destination to read as well as write data to R3.
We're not sure how many R3 License we need for this scenario. From your reply, "one license" were mentioned for "WRITE" data to R3. I'm not sure what the "one license" mean.
Let's say we have 5 concurrent EP user having "WRITE" operation (via our web dynpro and then JCo, RFC) against R3. Do you mean we need to buy 5 R3 license ? or just one R3 license for "service account" ?
Hope you can shed some light
Thanks

Renewal License for Mini SAP doesnu00B4t work

Hi,
the link [http://www.sap.com/minisap|http://www.sap.com/minisap] for the renewal of the license key for Mini SAP does not work any more. I get an error page from SAP indicating that the page does not exist.
Does somebody know the new link ??

Hi Dietmar,
Try this link...
http://www.sap.com/solutions/netweaver/minisap.epx
Best regards, Andy

License for SAP Portal (SAP NetWeaver 7.0)

Similar Messages

Maybe you are looking for