License for Seting-Up Maintenance Optimizer

Hello all,
Do we need a valied Solution manager license to set up maintanance optimizer? I know we have to create new users to set up MO, so I guess it will not work with user sap* alone.
Our customer wants to use Solman just to download the patches, can you please suggest an alternative if they are not ready for a solman license?
Thanks,
Sudhan

Hello Sudhan,
I understand that your customers want to use Solution Manager only to download patches. However, there are many things which can be done with the help of Solution Manager. Just to let you know, in near future, Solution Manager will be one of the most important thing and which may become operating SAP without Solution Manager very difficult.
However, you need to have a valid licence to configure Maintainence Optimizer. So, it is better to have valid licence for Solution Manager not only for Maintainence Optimizer configuration, but also, in keeping the future prospects on Solution Manager and their benifits.
I suggest you to explain to your custormer the uses of Solution Manager.
You can also use the following link to get more information on Solution Manager.
1) http://help.sap.com/saphelp_nw70/helpdata/EN/02/5ec13690581b20e10000009b38f839/frameset.htm
2)
Overview of Maintenance Optimizer in SAP Solution Manager 4.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/304f52c1-3aae-2910-6081-8d1deace58f3
3) SAP Solution Manager Functions and Benifits
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
4) Test Drive SAP Solution Manager in an implementation project
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2a92c290-0201-0010-4b8f-a2aaaa3b822e
Hope it is helpful.
Regards,
Satish.

Similar Messages

System not available for selection in Maintenance Optimizer

Hello,
When planning the maintenance in MOPZ I choose product version and the system displays a list of systems assigned to the Product Version. However, the list only shows one of the two systems assigned to the logical component (prod system). I have looked at the logical component in SMSY listed under SAP ERP -> SAP ECC Server -> Z_SAP ERP and both systems are listed and are "green". A Consistency Check of the logical component shows no errors.
Any ideas are helpful, thank you.

Hello,
There is no 'display filter' on the screen you are referring to, Change Management -> Maintenance Optimizer -> Create New Maintenance Transaction. This is the initial screen of the maintenance transaction where it shows the 5 steps of the maintenance transaction. The following selectable fields are available:
Priority
Short Text
Product version
When I make a selection for the product version an additional selectable table is available where I can select the systems. I should be able to see all the systems assigned to the logical component, however I only see one of the two systems.
I have checked two other Solution Manager systems and there is no 'display filter' or 'hide filter' button either.
Regards,
Robert

Solution manager maintenance optimizer

Hi all,
I have what I think is an issue, and hoping someone could possibly point me in the direction to correct. I have setup our solution manager system and trying to get the maintenance optimizer option working fully. I have a java system that I pull the information from SLD perfectly fine, and it lists all installed software components via SMSY>SYSTEMS perfectly. I have assigned logical components etc. I can create a new maintenance optimizer transaction, select the proper system with assigned components, but when it lists the files to be downloaded automatically I expect to see alot more files available for download than it lists for me. I assume I am missing something, but not sure where to look.
Would anyone be able to possibly point me in the right direction on what I might be missing?
Regards,
Chris

Hi Markus,
The system is SAP EHP1 for SAP Netweaver 7.0. It has the following components installed and specified in logical components:
Adobe Document services
Application server Java
EP Core
Enterprise Portal
Along with the kernel files I also get the following files available for download via maintenance optimizer (6 in total)
FORUMS06_0-10005892.SCA SP06 for FORUMS 7.01
BP_PROJ_PORT_DESIGNCOLL
BPPPMDC17_0-10003174.SCA BP PROJ., PORT. & DCOL. 4.0 SP17
BP ERP05 PROJ SELF-SERV
BPERP5PSS17_0-10003284.SCA BP ERP05 PROJ SELF-SERV 1.0 Support Package 17
BP ERP05 MAINTENANCE TECH
BPERP5MTC07_0-10004455.SCA SP07 for BP ERP05 MAINTENANCE TECH 1.2
BP ERP SITE TECHNICIAN
BPIS7TST07_0-10004458.SCA SP07 for BP ERP SITE TECHNICIAN 1.20
BP ERP ICM ANALYST
BPIS7ICMAL06_0-10006119.SCA SP06 for BP ERP ICM ANALYST 1.41
When I look at installed system components via SMSY it correctly shows everything installed which includes:
ADOBE DOCUMENT SERVICES 7.01 0006 SP006 ADOBE DOCUMENT SERVICES 7.00
BI BASE SERVICES 7.01 0006 SP006 BI BASE SERVICES 7.01
BI INFORM. BROADCASTING 7.01 0006 SP006 BI INFORM. BROADCASTING 7.00
BI META MODEL REPOSITORY 7.01 0006 SP006 BI META MODEL REPOSITORY 7.01
BI REPORTING AND PLANNING 7.01 0006 SP006 BI REPORTING AND PLANNING 7.01
BI UNIVERSAL DATA INTEGRATION 7.01 0006 SP006 BI UNIVERSAL DATA INTEGRATION BI UDI 7.01
BI WEB APPLICATIONS 7.01 0006 SP006 BI WEB APPLICATIONS 7.00
BI WEBDYNPRO ALV 7.01 0006 SP006 BI WEBDYNPRO ALV 7.01
BP ERP FIN MDM 1.40 0006 SP006 BP for Financial MDM 1.40
BP ERP HR EIC 1.40 0006 SP006 BP für HR Employee Interaction Center 1.40
BP ERP ICM ANALYST 1.41 0004 SP004 BP for ICM-Analyst 1.41
BP ERP RECRUITER 1.40 0006 SP006 BP for Recruiter 1.40
BP ERP RECRUITING ADMIN 1.40 0006 SP006 BP for E-Recruiting Administrator 1.40
BP ERP SITE TECHNICIAN 1.20 0006 SP006 BP for Site Technician (Telecommunications) 1.20
BP ERP UT XSS 1.40 0006 SP006 BP ERP UT Definition für Self Service BP 1.40
BP ERP05 BUS UNIT ANALYST 20 1.0 0017 SP017 BP for Business Unit Analyst (mySAP ERP) 1.0
BP ERP05 COMMON PARTS 1.41 0006 SP006 BP ERP05 COMMON PARTS 1.41
BP ERP05 ESS 1.41 0006 SP006 BP for Employee Self-Service 1.41
BP ERP05 HR ADMINISTRATOR 1.41 0006 SP006 BP for HR Administrator (mySAP ERP) 1.41
BP ERP05 MAINTENANCE TECH 1.2 0006 SP006 BP for Maintenance Technician 1.2
BP ERP05 MSS 1.41 0006 SP006 BP for Manager Self-Service 1.41
BP ERP05 PROJ SELF-SERV 1.0 0016 SP016 BP for Project Self-Service (mySAP ERP) 1.0
BP ERP05 SELF-SERV ADMIN 1.0 0017 SP017 BP for Self-Service Administrator (my SAP ERP) 1.0
BP ERP05 TALENT DEV 1.01 0010 SP010 BP for Talent Development Specialist 1.01
BP_PROJ_PORT_DESIGNCOLL 4.0 0015 SP015 BP for Project Portfolio Management and Design Collaboration 4.0
CAF EU 7.01 0006 SP006 SAP Net Weaver End User 7.01
DI BUILD TOOL 7.01 0000 SAP BUILD TOOL 7.01
DI CHANGE MANAGEMENT SERVER 7.01 0006 SP006 CHANGE MANAGEMENT SERVER and SXMAN 7.00 701
DI COMPONENT BUILD SERVER 7.01 0006 SP006 COMPONENT BUILD SERVER 7.01
DI DESIGN TIME REPOSITORY 7.01 0006 SP006 DESIGN TIME REPOSITORY 7.01
FORUMS 7.01 0005 SP005 FORUMS 7.01
J2EE ENGINE BASE TABLES 7.01 0006 SP006 BASETABLES
J2EE ENGINE CORE TOOLS 7.01 0006 SP006 CORE TOOLS J2EE ENGINE
JAVA LOG VIEWER 7.01 0006 SP006 SAP JAVA LOG VIEWER 7.01
JAVA SP MANAGER 7.01 0006 SP006 JAVA SP MANAGER 7.00
KMC BASE COMPONENTS 7.01 0006 SP006 KMC BASE COMPONENTS 7.01
KMC COLLABORATION 7.01 0006 SP006 KMC COLLABORATION 7.01
KMC CONTENT MANAGEMENT 7.01 0006 SP006 KMC CONTENT MANAGEMENT 7.01
KMC UI LAYER 7.01 0006 SP006 KMC UI LAYER 7.01
KMC WEB PAGE COMPOSER 7.01 0006 SP006 KMC WEB PAGE COMPOSER 7.01
LIFECYCLE MGMT PORTAL 7.01 0006 SP006 LIFECYCLE MGMT PORTAL 7.01
LIFECYCLE MGMT TOOLS 7.01 0006 SP006 LIFECYCLE MGMT TOOLS 7.01
MI ADMINISTRATION 7.01 0006 SP006 MI ADMINISTRATION 7.01
MI DRIVERS 7.01 0006 SP006 MI DRIVERS 7.00
MI WD LAPTOP 7.01 0006 SP006 Net Weaver Mobile Infrastructure Web Dynpro LAPTOP 7.00
PDK PORTAL SERVICES 7.01 0006 SP006 PDK PORTAL SERVICES 7.00
PORTAL CORE SERVICES 7.01 0006 SP006 EPBC 7.01
PORTAL FRAMEWORK 7.01 0006 SP006 EPBC2 7.01
PORTAL PLATFORM 7.01 0006 SP006 EP - Portal Server PORTAL 7.01
PORTAL WEB DYNPRO 7.01 0006 SP006 PORTAL WEB DYNPRO 7.01
RTC 7.01 0006 SP006 RTC 7.00
RTC-STREAM 7.01 0006 SP006 RTC-STREAM 7.00
SAP CAF 7.01 0006 SP006 SAP CAF 7.01
SAP CAF-KM 7.01 0006 SP006 SAP CAF-KM 7.01
SAP CAF-UM 7.01 0006 SP006 SAP CAF-UM 7.01
SAP CPS BASIC (SCHEDULER) 7.01 0004 SP004 Job scheduling capabilities of SAP NetWeaver 7.01
SAP ESS 603 0006 SP006 SAP ESS 603
SAP INTERNET KNOWLEDGE SERVLET 7.01 0006 SP006 SAP Internet Knowledge Servlet 7.00 (SAP J2EE IKS)
SAP J2EE ENGINE 7.01 0006 SP006 SAP J2EE Engine 7.01
SAP J2EE ENGINE CORE 7.01 0006 SP006 SAP J2EE ENGINE CORE 7.01
SAP JAVA TECHNOLOGY S OFFLINE 7.01 0006 SP006 SAP JAVA TECHNOLOGY S OFFLINE SAP TECH S OFFLINE 7.01
SAP JAVA TECHNOLOGY SERVICES 7.01 0006 SP006 SAP JAVA TECHNOLOGY SERVICES (Schicht 3 Dummy) SAP JAVA TECH SERVICES
SAP MI CLIENT 7.01 0006 SP006 SAP Mobile Infrastructure Client 7.0
SAP MSS 600 0017 SP017 SAP MSS 600 (Manager Self Services)
SAP PCUI_GP 603 0006 SP006 SAP PCUI_GP 603
SAP SOFTW. DELIV. MANAGER 7.01 0000 SAP JAVA SL 7.01
SOFTWARE LIFECYCLE MANAGEMENT 7.01 0006 SP006 SOFTWARE LIFECYCLE MANAGER 7.01
UME ADMINISTRATION 7.01 0006 SP006 UME ADMINISTRATION 7.01
UWL COLL PROCESS ENGINE 7.01 0006 SP006 UWL COLL PROCESS ENGINE 7.01
VISUAL COMPOSER BASE 7.01 0006 SP006 VISUAL COMPOSER BASE 7.00
VISUAL COMPOSER BI KITS 7.01 0006 SP006 VISUAL COMPOSER BI KITS 7.00
VISUAL COMPOSER FLEX 7.01 0006 SP006 VISUAL COMPOSER FLEX 7.00
VISUAL COMPOSER FRAMEWORK 7.01 0006 SP006 VISUAL COMPOSER FRAMEWORK 7.00
VISUAL COMPOSER GP KITS 7.01 0006 SP006 VISUAL COMPOSER GP KITS 7.00
VISUAL COMPOSER XX KITS 7.01 0006 SP006 VISUAL COMPOSER XX KITS 7.00
WEB DYNPRO EXTENSIONS 7.01 0006 SP006 WEB DYNPRO EXTENSIONS 7.01
I expect to see more than the 6 previously mentioned files available for download, also the option for EHP2 which I know is available, or am I wrong in expecting this.

Configuration of Maintenance Optimizer and IMG-configuration

Hi!
I am installing SAP Solution Manager 4.0 and two ERP-systems and would like to ask, whether a suitable detailed documentation about
Configuring Maintenance optimizer
IMG-Configuration
does exist?
P.S. Besides the document "Step by step Confugaration of Maintenance Optimizer" or .sim-File.
Thank you very much indead!
regards

Dear Axel,
Kindly review the URL :
http://service.sap.com/solman-mopz
On the first page at the bottom end you would find an PDF for configuration of Maintenance Optimizer and also an SAP Tutor file for the same.
Follow the steps and you are ready with the optimizer for downloading packages.
Hope the above information helps.
Regards
Amit Devale

What is best practice for using Maintenance Optimizer to download SPS + EhP

SAP indicates in note 1095233 and many other documents that the best practice is to implement an EhP along with an SP Stack in the same queue. Furthermore, the only way to download the components of an EhP is via Maintenance Optimizer. However, in step 2 (Calculate download files automatically) you must choose either Maintenance (SPS) or Enhancement Package Installation (EhP); there is no way to tell Maintenance Optimizer that you want to download both SPS and EhP.
In developing the process for my team I circumvented the problem by saying to select Maintenance first to get the SPS into the Download Basket and follow that with selecting Enhancement Package Installation to get the EhP into the Download Basket. The plan would be to include all the downloads in the SPAM/SAINT queue with the expectation that SPAM/SAINT will be able to determine what must be included.
I'm wondering now whether that is a legitimate way to approach this and I am hoping others will share their process.
Thanks,
Terry McCann
Monsanto Company
St. Louis, MO

Actually, I don't believe you will get the entire SP Stack for ERP 6, you only get those pieces of the stack that are required for the Technical Usages you select for the EhP. I'm basing that on my observation that you get a different subset of the files making up the stack depending upon your TU selection. Also, note 1095233 specifically states:
If now the corrections included in the enhancement package 3 correspond to ERP 6.0 SP level 11, SAP recommends to update also the parts of your system to SP level 11 which you do not want to update to enhancement package 3 to achieve a consistent correction level in all parts of your application: SAP recommends to update all software components to the correction status corresponding to SAP ERP 6.0 Support Package Stack 11 with the installation of SAP enhancement package 3 for SAP ERP 6.0.
Thanks,
Terry

Assign patch levels for component versions of system: Maintenance Optimizer

Hello,
I am trying to have Maintenance Optimizer check for what files I need to download. However, I get the following error:
Assign patch levels for component versions of system SXM.
I susepect that the problem really lies in the fact that the "SP Levels" in the "Software Components" tab is not populated in SMSY.
Does something read that information from the child system and populate the data automatically? This is a new system install, and perhaps a step was missed in solman.
Thanks,
John

Hi John,
MOPZ directs you to SAP Software Download Center in order to show you the lastest status and available packages.
If you are not seeing the packages perhaps you created you satellite system at solution manager pointing to the wrong product/version.
MOPZ is created to point you to the available Support Package Stacks for its products.
Normally one creates a system in solution manager defining it as an ECC server ( this does not have a download page for MOPZ ) when the correct assignment would be SAP ERP ( this last has a download page for MOPZ ).
If this is your case, you´ll need to redefine the satellite system again in our solution manager.
hope this helps.
Valdecir

Setup guide for Maintenance Optimizer in solman 7.0 ehp1 sp18

Hi All ,
Please let me know the exact link where I can find the setup guide for Maintenance Optimizer in Solman 7.0 EHP1 sp18 .
I found a few guides but was not able to locate the correct guide for this particular version.
Thanks
Sunil Kumar

Hi Sunil,
EhP1 for Solution Manager means you have at least SPS18. Therefore documentation based on EhP1 is still valid, although Maintenance Optimizer has been updated as of SPS22+
You can refer to this guide: https://websmp106.sap-ag.de/~sapdownload/011000358700002003492008E
And also this help documentation: http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm
Regards,
-Rohan

Error in Maintenance Optimizer in step "Select files for component "

Hi everybody,
i would like to download patches for my system. I have defined a solution and now i will start the Maintenance Optimizer procedure to download, but when i press a button "Select Files..." an error "the page cannot be displayed" occurred.
Does anybody know what should i check in my configuration? Where can I find more details for error?
Regards
Bogdan

Hi,
Here is the whole solution for you.
Hope you have implemented the note 990534 properly.
This is what I have done to resolve the same issue -
Apply patch ST-ICO 8 and 9
generate BC set SOLMAN40_MOPZ_TTYP_SLMO_000
generate BC set SOLMAN40_CHARM_PROXYFACT_001
If the error still persist, you will need to work on the below notes. (997780)
Goto SPRO - IMG>SAP SOL MGR>SCENARIO SPECIFIC>CHANGE REQ MGMNT>EXTNDED CONFIG>CHANGE TXN>CONSISTENCY CHECK IN CHANGE REQ MGMNT (define basic settings SOCM_CHECK_002)
Deselect the 'Integr' field (integration with change management is required) for the checks listed below. The system issues a message stating that changes are not allowed and that the entries are SAP property. This is only a warning message. Choose ENTER to ignore the message and save your changes.
Checks:
           IB_SYST_CHK
           S_USER_CHECK
           REQUEST_IN_PROCESS
           SOLUTION_ASSIGNMENT
           PRODUCT_ASSIGNMENT
           S_USER_CHECK
           EMPTY_CONTAINER
           SYSTEM_STATUS_OK
If you are getting the error "no active ibase" after this, try to implement 1030498.
Hope this helps. If this corrects your issue, please mark the question as answered and award points.
Thanks,
Mehfil Meherali

Solutions for Maintenance Optimizer via Tr. DSWP

Hi!
I have some simple question.
I have already installed Solution Manager and established all the steps for the Maintenance Optimizer.
I also created two systems via Tr. SMSY and have defined the logical components.
I also defined one solution via DSWP and would like to demonstrate that the maintenance functionality is working fine.
But I cannot see any systems, if I am clicking on "Maintenance Optimizer".
<b>How can I do this step in order to show the maintenance optimizer functionality for some solution in the Tx. DSWP?</b>
Thank you!
regards

Hi!
Thank you.
>Go to the solution settings and make right click over the system, select "put in solution"
Where can I find this issue or which TX. do you use?
The second problem is thet I cannot see some grafic elements if I am clicking ot the Servers (Tx. solution_directory) and I am getting the error "Could not initialize"
Thank you!
regards

Client for maintenance optimizer

Hi friends,
Which client is to be ussed for maintenance optimizer configuration (its 000 or 001)
Kindly advice.
Regards
Ayush johri

Hi Thomas,
I want the automatic calculated delta of available support packages and the actual support package level of my systems and for this i have to connect my DEV system and assign them to a logical component
1. How can i connect the DEV system to the logical component (if you can guide me through the steps )
2. As of installing Sol Man i havent created any solution manager landscape, now as you said sol man landscape would be used for connecting the DEV system to it. how can i do this ?
Please advice.
Your suggestions would be highly appreciated
Regards
Ayush

Stack File for JSPM when using Maintenance Optimizer

Hello,
As you know JSPM looks for a stack file when applying a support pack stack. When using maintanance optimizer I see no way to get a stack file. I end up having to do the work twice: once to get the files in maintenance optimizer, and again I have to go to marketplace swdc to choose the files and create the list of downloads again only to save a stack file.
Am I missing something? Is this double work really necessary?

Hello John,
It seems that you are doing double work.
If you use the download type as "SLM" then you have a chance to transfer the XML to SLM. Else if you choose the download type as "Download Manager" then the XML should be created in the EPS/in folder of the Solution Manager system.
You also need to check whether you have applied all the applicable notes for the Solution Manager stack from the note 1122966 and that the BC sets for MOPZ are activated correctly.
Finally check the permissions on the EPS/in folder of Solution Manager to check whether there is a issue with authorizations.
A SLG1 log ( filtered by the username who creates the MOPZ transaction and time at which the transaction was created ) will reveal the errors in the process.
Regards
Amit

How to approve in maintenance optimizer for download.

Dear All,
I need to download support pack and other software like SAP JVM Switch tool 1.0 from service market place.
It is asking for approval, Could you please specify which tcode is needed for maintenance optimizer and step by step
solution to approve the software.
Regards,
Dilip

Hi Dilip,
refer link :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304f52c1-3aae-2910-6081-8d1deace58f3?QuickLink=events&overridelayout=true
look for section Maintenance optimizer - Screens , where step by step screen shots are provided to approve packages.
You need to go to Tcode DSWP --> go to correct/active solution --> Change management --> Maintenance optimizer
Make sure that the SAP user id you are trying to access have S user id linked , check Tcode AISUSER
Regards,

No available selection for stack target at maintenance optimizer

Hi all,
I have an issue. You can see from the screen shoot. I can not select target stack. What should i do at this moment? I want to configure for an ERP test system.
Thanks and best regards.

Hello,
This type of issue is a consequence of an error that went on before. The errors are usually caused by LMDB definition.
In order to determine what has gone wrong, please check the log tab. Also, the product version that you chose in Maintenance Optimizer and the LMDB definition are interesting information .
If system information privacy is a concern, you can open a support message for component SV-SMG-MAI.
Best regards,
Miguel Ariño

Maintenance optimizer transaction dont see product version for a solution

Hi,
I am having a very difficult time in understanding the concept of solution manager product system,instance,solution. Now, in Technical Administration >> Solutions >> I click on a solution, in the solution the product column is missing. Then it appears after some configuration.
Now, when I create a maintenance optimizer transaction, I select the solution but I don't see the see product version, nothing appears.
Please guide

Hi Shashank,
If I am getting you correctly then you are not getting product version in drop down in a new MOPZ transaction ?
Use below steps:
Run Transaction Solman_Workcenter.
Select the Solution Manager Administration tab.
Click Solutions.
Either.
Create a new Solution to add the logical component, or add it to an existing solution.
If a new solution...
Click on New.
Give the solution a name.
Set the Solution Data settings.
Now the Solution exists.
Select an existing solution that you want the System to be placed (can be the new one).
Add the Logical Component to the Solution.
If the system is other than Type Production then...
Go to change edit mode.
Right click on the SID, and select “Put in Solution” the cell the SID is in will turn green.
Save.
Regards,
Divyanshu

Solman setup maintenance optimizer

Hi all,
I'm trying to setup my Solman Maintenance Optimizer to download SP.
When I read the configuration guide. It says the prerequisite is as below :-
The Maintenance Optimizer contains a lot of scenarios for maintenence procedures. The scenarios have different prerequisites.
Basic Prerequisites
   1.
      You have configured the Maintenance Optimizer in the SAP Solution Manager customizing.
      You must perform the following customizing activities for the Maintenance Optimizer:
            Assign S users for the SAP Support Portal.
            This activity specifies the S users (user ID for the SAP Service Marketplace) assigned to user IDs for the SAP Solution Manager.
            For more information see S Users in the Maintenance Optimizer.
            Enter user for communication with SAP Service and Support systems
2. This activity specifies the RFC connection SAP-OSS and the corresponding RFC user.
3.     You have assigned product versions to the system to be maintained, in the system landscape.
      You have assigned the systems to be maintained to a logical component.
      Note Note
      If you want to use a solution, you must assign the systems to be maintained, to the solution landscape. For more information, see Solution Manager System Landscape.
      End of the note.
   4.
      You have installed the Download Manager locally in your workplace. The Download Manager is in the SAP Software Distribution Center in the SAP Support Portal.
      Note Note
The item no2.
    This activity specifies the RFC connection SAP-OSS and the corresponding RFC user. <---- Is this mean I must have install and setup my Saprouter so that the SAP OSS connection is working before I can completed the SAP Solman Maintenance Optimizer setup?
Thanks.
Ck chai

Hi,
Just clarify my question.
I would like to run tcode "Solman_setup" to activate my Maintenance Optimizer for my new install SOLMAN & ECC6 System.
The reason is I need to download service pack for my ECC6 system.
Now I have some confusion on the "Solman_Setup" prerequisites
Prerequisites
You have installed the SAP Solution Manager and satisfied the following configuration prerequisites:
1)   The license key is installed. -
>OK
2)   The profile parameter /ICM_HOST_NAME_FULL or SAPLOCALHOSTFULL is set----
>OK
3)   The Transport Management System (TMS) is configured. -
> Not sure, Is this mean I have to setup my TMS in all the ECC6 system? Example --> DEV, QAS and PROD.
4)   The connection to the SAP backend system exists and works. -
> What is this mean? I need to Setup RFC connection manually using SM59? RFC connection from Solman to my ECC6-DEV,QAS, PRD?
5)   The SAP Solution Manager Java instance is up-to-date. --> not too sure. Can someone explain how this can be checked?
Thank you very much.
Ck chai

License for Seting-Up Maintenance Optimizer

Similar Messages

Maybe you are looking for