License & Hardware-Key for CE1

Hi,
where can I see how long the license is valid of the current installation ( CE711SP1_SDN-Preview CE1 ).
And secodly I would like to know how to obtain Hardware-Key and getting installed.
Regards
Alexander
Edited by: AlexanderZiegler on Oct 18, 2009 5:08 PM

I have got it.
Once the CE server is up and running, launch your browser and go to http://localhost:50100/nwa to start SAP NetWeaver Administrator. Log on with username Administrator and the master password you defined during the installation procedure.
Download and install a license key
The first step is to retrieve your systemu2019s hardware key from SAP NetWeaver Administrator. Go to Configuration Management Infrastructure > Licenses. Copy your u201CActive Hardware Keyu201D into the clipboard.
Go to http://www.sap.com/minisap fill out the form, and paste your hardware key from the clipboard. Submit the form.
Edited by: AlexanderZiegler on Oct 19, 2009 8:19 AM

Similar Messages

License/Hardware Key for multihomed Development-Laptop

On my laptop I've installed an licensed a WebAS for development with NWDS. I use the laptop on different networks (different fixed IP's or no network at all). I've noticed that this somehow changes the HardwareKey and thus requires multiple licensed for the same installation.
On the other side we have an installation using DHCP and the HardwareKey does not change.
What aspects (IP, MAC, ProcessorID, RAM, Disk,...) are taken into account for generating the HardwareKey of a J2EE-WebAS?

Take a look at SAP Note 793649 and 174911.
There you will something like that.
"Einzig auf Windows wird ein Schlüssel genommen, der NICHT von der Hardware abhängt. Eine Neuinstalltion von Windows führt definitiv dazu, dass der Hardwareschlüssel ungültig wird."
And a list of actions who change the HardwareKey. (793649)
The following actions will change the Hardware Key:
1. Formatting the machine and reinstalling Windows.
2. When changing the computer name.
3. When changing the domain (it will not change back when returning to the previous domain).
4. On Linux - If you change the network card.
The following actions will NOT change the Hardware Key:
1. When adding a login user for the computer.
2. When changing date/time on the computer.
3. When changing the IP.
4. When adding a memory or hard drive to the computer.
If you encounter any other scenario that changes the hardware key,
Regards
Marco

Error installing license - Hardware Key Empty

Hello gurus,
We have our SAP ECC 6 installed in one Server running AIX. It´s working good.
Now, we have installed a cluster service. If the First Server stops, the cluster service (IBM HACMP) move all filesystems to Second server. The cluster moves also users, IP address and hostname. After move all resources, then the service starts ECC in another physical server.
This process is working fine. But when the SAP ECC starts on the second server, I cannot logon in system because the license key is not valid. I can logon only with SAP*.
So, when I call SLICENSE to get all information needed to get another license, the field Hardware Key is empty.
I´ve tried too by operating system (saplicense -get). I have now the hardware key and the new license file. This file was installed, but SAP system is not working yet. For information, the license appears as valid, but the field is empty yet and the system doesn´t work.
Anybody have an idea to solve this problem?
Thanks,
Carlos

Hi Carlos,
Please check the OSS notes: 181543 and 538081.
Regards.
Ruchit.

Hardware key for the sap system.

Hi Experts ,
My licence is going to expired within 3 days, i tried to request another key but Hardware key is mandatory.
I tried for Hardware key (HWID) , running the "saplicence.exe" but not found. Tcode 'SLICENCE' is not avialable.
Help me in this.
Thanks
Aisurya.

if saplicense.exe is not found anywhere in your sap directory, then please download the Kernel Stack (SAPEXE_xxx.SAR) from Service Marketplace, as saplicense executable is contained in SAPEXE_xxx.SAR.
http://service.sap.com/patches
- Browse Our Download Catalog
- Additional Components
- SAP Kernel
- <choose your kernel, release>...
- < choose your OS>
- #Database independent
- SAPEXE_xxx.SAR
Regards,
Vincent

Install Number, System Number, Hardware Key

Hi all,
The Install Number, System Number, Hardware Key all are displayed on the help/about form.
Is there any way to retrieve this information using SDK code?
Is there any other security type information that can be accessed such as number of licensed users?
Thanks for any help.

Hi,
You may check these threads first:
Re: Finding Hardware Key
License: Hardware Key
Re: How to get Hardware Key?
Thanks,
Gordon

Hardware key request

Hello, could someone please generate a hardware key for me or explain how to obtain it? I am trying to install NetWeaver PI 7.1 ABAP+Java from an SDN subscription download. I have no existing SAP software installed.
SID: XID
Server: dev1
Instance: 00
Thanks,
James

Hello James
my mistake, saplicense is the utility, not the slicense at os. SLICENSE is tcode at SAP level.
saplicense installation is the post installation step, so saplicense utility comes with installation itself, either it is Windows or Unix flavour, go to OS as sidadm user
http://help.sap.com/saphelp_nw04/helpdata/EN/a7/512ca2407a11d1893b0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/a7/512ca2407a11d1893b0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/a7/512ca2407a11d1893b0000e8323c4f/frameset.htm

PRODUCT KEY FOR WINDOWS 7 ULTIMATE ACTIVATION

actually sir
on my window its showing that this copy of windows is not ginuine.
and its telling for product key.
i have tried much keys to unlock but its not happening to me .
sir please help me with this problem which i m facing . key which wil be compactible to it to get activate
please provide me a product
thanking you
This question was solved.
View Solution.

You will need to purchase a license activation key for Windows 7 Ultimate.
HP does not install Windows 7 Ultimate version on its notebook.
That is why your attempt to upgrade from Windows Basic\Home edition\Professional to Windows 7 Ultimate is not working.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

License Installation for Multiple Hardware Keys in SAP J2EE Engine

Hi Everyone,
I have a question to ask that we have a Failover setup in our Client Enviornment.
But for SAP JAVA System I am seeing a Problem :
Whenever Failover will happen SAP System will be moved to different Hardware box
which has different Hardware Key.
1) In SAP ABAP Systems we can install Multiple Licenses for Multiple HArdware Keys
so that whenever Failover happens , no need to apply license for that Hardware key
2) But in J2ee System under License Adapter , I am not able to see any option under the same
to install another License
Under Licnese Adpater Service , I am able to see license of J2ee-engine_ora , maintanance_ora & Netweaver_ora licneses
Thanks --
Deepak Gosain

Hi,
Try to paste the two licenses in the same file and then import the license file.
Not sure but give it a try it should work.
Regards,
Vamshi.

Duplicate Hardware Key when tried to request for new license key

Dear Experts,
Our SAP ECC6 license key is going expire in these few days. Therefore, I tried to request for new license key with the same Hardware key at SAP Support Portal, but it showed "Duplicate Hardware Key".
Should I wait for the current one to expire before I could request for new one?
Regards,
Abraham

Hi Nick,
It's not a temporary license.
It just when I tried to get a new license key 1 week ago, the installation number we had was just licensed for MaxDB as database server, therefore, it only gave 2 weeks validity of license key.
Now, we have changed our contract licensed to MS-SQL server.
Therefore, I need to get the new license key based on MS-SQL server. Since, I didn't do any reformating on the server, thus, the hardware key is still the same when I tried to get the new license key.
What should I do?
Regards,
Abraham

Installing license key in CE1 ( Type Release Updated )

Hi,
Because this is a JAVA only system, I only know two ways to obtain the Hardware key, needed to get a SAP license key from http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm.
Via `saplicense.exe -get, which is not possible because saplicense.exe is not there. I look for it on every disk on the system. So it was really not there.
The download of the database independent part of a kernel, from the SAP Service Marketplace.solved this, ( downloads Support Packages and Patches"u00A0SAP NetWeaver"u00A0SAP NETWEAVER"u00A0SAP NETWEAVER 2004S"u00A0Entry by Component"u00A0Application Server ABAP -->SAP KERNEL 7.00 32-BIT -> #Database independent -> Windows Server on IA32 32bit In this file is a working saplicense.exe.
Via the Visual Administrator. There is no directory D:\usr\sap\CE1\J01\j2ee\admin directory,
so I don't know how to start the Visual Administrator
To install the license key file I also need a Visual Administrator. Or is there another way to install the license file from |SAP?
Kind regards, Edwin Slee

Hi,
I faced a problem, which required me to install the licence (on M36). I was searching for how to do it, came across this link.
I did it through netweaver adminitration. http://localhost/nwa/licenses --> install license --> browse your license file and add.
Hope this helps.
Regards
Aditya
Message was edited by:
Aditya Adepu

Error in license check - Error getting the hardware key

Hello,
I'm trying to run SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
but I still have a issue to log on, message : "error in license check"
I try everything I found in forums, I have tested the license, see the trace below.
I checked too files dev_w*
It seems there is a problem with server message
I checked in "dev_ms" file, but nothing has been wrote inside.
Please could you help ? maybe someone met the same issue and solved it.
Thanks
trc file: "dev_slic", trc level: 2, release: "700"
Test license for SAP SYSTEM: N4S
rdisp/mshost: n4shost
rdisp/msserv: sapmsN4S
MsIAttachEx: connect to n4shost / sapmsN4S
NiIInit: allocated nitab (2048 at 0xb72fa008)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiHsLGetNodeAddr: got hostname 'n4shost' from operation system
NiIGetNodeAddr: hostname 'n4shost' = addr 192.168.155.1
NiHsLGetServNo: got service name 'sapmsN4S' from operation system
NiIGetServNo: servicename 'sapmsN4S' = port 0E.11/3601
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiHsLGetServName: found port number 0E.11/3601 in cache
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
"dev_slic" [noeol] 26L, 1378C 1,0-1 Top
dev_w8
M Wed Oct 19 11:46:48 2011
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2257]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17124]
M
M Modeinfo for User T8/M0
M
M tm state = 2
M uid = 9
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M ext_session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTABTC
M lastThFc = THFCBTC
M lastAction = TH_IACT_NO_ACTION
M th_errno = 0
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 2
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 31
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0xa665a3b0
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c 225]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c 183]
L *** ERROR => BtcEvtRaise: ThScheduler failed (target=, rc=4) [btcevt.c 223]
L *** ERROR => BtcEojRaise: BtcEvtRaise failed: jobname=BI_WRITE_PROT_TO_APPLLOG , jobcount=11414801, status=A [btcevt.c 52]

Hi,
As you are running a Trial version, I do not think HA/ASCS would be relevant for you.
As you found in the dev_ms trace, the port 3601 for message server is not accessible:
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) http://nixxi.cpp 2769
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
Check via command netstat if the port 3601 is free for use. The hardware key is obtained from message server and since this port is not available, neither is the message server/the hardware key. Perhaps a VM restart could also help.
Regards,
Srikishan

License Key For SAP R/3 Enterprise Demo Version

Hello Basis Gurus,
I have installed SAP R/3 Enterprise Demo Version in my Notebook.
When i am trying to login using User ID: SAPUSER getting an error message that ":Logon refused (valid license not installed)"
SAP R/3 Details:
Component Version: SAP R/3 Enterprise
Installation Number: INITIAL
License expiration: ..----
Active Hardware Key: C1129820057
System Number: System No. Empty
When i am trying to install the License Key at Command Prompt getting the error message that
Specify your license key:
LICENSE_KEY   1...5....0....5....0...4
LICENSE_KEY =
Wrong license data specified
>        Check the specified license data for:
>        - typing errors
>        - upper / lower characters
>        - same values as noted on license fax
How can i get the correct LICENSE_KEY for this demo version for the above hard ware key.
Please advice urgently..

to get hardware key:
saplicense -get
to get license key:
https://websmp106.sap-ag.de/licensekeys

Getting License Key for NSP (no E-Mail is sent)

Hello SDN Team,
as reported I have successfully installed the NW04 ABAP Sneak Preview. Now I'm trying to get a license for it at http://www.sap.com/solutions/netweaver/minisap.epx. I enter all the data, check the License Agreement, hardware key from Transaction SLICENSE, choose the System NSP and send the form. But I never got an E-Mail with the key. So I tried the System WA1 just for a test. And after just a Minute I've got the E-Mail with the key.
Regards
Gregor

lol.
@gregor,
i don't know what kind of groopie you are and why you are so opportunistic to talk for everyone.
fact is:
- some (including me) haven't even got that email.
OS: "Did you request it again - after I fixed the EmailServer?"
- others seem to have got it, but with a developer key for installation number DEMOSYSTEM whereas the installation sets the installation number to INITIAL.
the developer key for INITIAL is definitely different from the one for DEMOSYSTEM.
so to be a little constructive, at least tell people that they probably have to actualize their general license to update the installation from INITIAL to DEMOSYSTEM and afterwards use the known developer key to unlock the repository.
and don't you tell me what to post an what not to post.
anton
Message was edited by: Oliver Stiefbold

License key for a J2EE Engine standalone system

Hi,
I installed a J2EE Engine 7.0 standalone system (at first screen of installation, I selected node SAP ERP 2005 Support Release 2 to start the installation of SAP NetWeaver's software units - not software units of SAP ERP, NOT node SAP NetWeaver 2004s Support Release 2).
In http://service.sap.com/licensekey, I request a license key for my new J2EE Engine standalone system. At first page, I only see 2 installation options to select, these're corresponding to SAP ERP and SAP SOLUTION MANAGER. I select SAP ERP and at System Information page, I choose SAP product SAP NETWEAVER.
Then, I install the license key received via Visual Administrator - Server 0 - Services - Licensing Adapter. But 28 days bypass, system get down because of license expiration (not relates to the date validation).
The same thing happens when I make other license keys by choosing SAP product SAP WEB AS and SAP ERP.
Someone tell me what's wrong?
Thanks,
Toan Do

Hi Toan,
I hope you are following the procedure given in the above mentioned link (which i gave).
In the Visual Administrator choose Server 0 --> Services --> Licensing Adapter. The system data that you need to request the license from the SAP Service Marketplace appears.
¡ Installation number (if it exists)
¡ System ID,
¡ System number (if it exists)
¡ Hardware key
¡ Current release
 2. Under the Internet address service.sap.com --> mySAP Business Suite, you can get to the initial page of the license key requests in SAP Service Marketplace. Here you will find all the information you need to request license keys.
 3. Enter your e-mail address in the request. The license key will be sent to you promptly by e-mail. Alternatively, you can also download the license key from the SAP Service Marketplace.
Do not make any changes to the license key. To import the license key, the file must not have been changed.
 4. In the Licensing Adapter in the Visual Administrator choose Install License from File.
 5. Select the license file that you want from SAP.
If this doesn't solve your issue, I suggest that you post a message with SAP.
Regards,
Siddhesh

Request License key for Install ECC6

Dear Sir:
I had installed the IDES mySAP ERP 2005, and willing to request a license key from the SAP web page,
but on the step 1 "Select Installation ", there is no ECC6 relative could be choose.
My question is if the installation should be registered by SAP? or should I do something else?
Sincerly need your help.
The information about installed machine is listed below:
Operating System: Windows Server 2003 with service pack 2
Database: Oracle 10g release 2
SAP product: IDES mySAP ERP 2005
Active Hardware Key is R0558308287
We also have an installed Solution Manager system for generating the install key.
Our company name is Everscience Information System Co.
Thanks and Best Regards

Hello Frank,
The first thing to do is make sure that you have an installation number for an ECC 6 system. If you have an installation number for this already then you can request a license for this system under this instalation number on the sap service market place.
http:
service.sap.com\licensekey
However you have said that your previous system was IDES mySAP ERP 2005. If so it is unlikely that the installation number you have for this system is valid for the license for the new system. In this case you need to contact your local contracts department and request the appropriate installation number.
Once you have the installation number you can request the license at the site above. Requesting a license is a self service on the market place.
Regards,
David

License & Hardware-Key for CE1

Similar Messages

Maybe you are looking for