License issue with ISE setup

Good Day All,
For a setup of 2 ISE on 2 site, connected via a WAN Link. A 1000 users license is used.
My question is that if the WAN link is down, how will the license distribution be?
Will the secondary policy cease to accept new connection? or will be allow up to 500? or 1000?
Thanks & Regards
Andrew

This would depend on the ISE structure. If you only have one admin node then the connection to that admin node drops...the other ISE will stop funtioning, but if you have some sort of redundancy builtin to the structure it is possible to continue using both assuming you can use the same license base, but if you have 500 device license on one, and 500 on the other, then that will be the limit for each location.
For instance we have a single admin node, but 2 locations using ISE for VPN users....if the link goes down here, then no one can connect at the remote site. But people that connect to the VPN here will continue to function.

Similar Messages

I set up the the sync add on and had no errors.When I sync now I get"Sync encountered an error while syncing:Firefox sync server maintenance is underway..."I have gotten this mesaage for the last 10 hours.Should I wait or is there an issue with my setup?

I just loaded Firefox onto my laptop. I set up the the sync add on and had no errors. When I hit sync now I get "Sync encountered an error while syncing: Firefox sync server maintenance is underway, syncing will resume automatically." I have gotten this message for the last 10 hours. Should I wait or is there an issue with my setup? I checked the Mozilla sync server status and it listed no issues.

There was a server out last week. see below. now everything works great. thanks for the follow up.
To:
Subject: [Bug 744289] sync107.db.scl3 down
Do not reply to this email. You can add comments to this bug at
https://bugzilla.mozilla.org/show_bug.cgi?id=744289
Gregory Szorc [:gps] <[email protected]> changed:
          What    |Removed                     |Added
            Status|UNCONFIRMED                 |RESOLVED
        Resolution|                            |FIXED
           Summary|error in sync               |sync107.db.scl3 down
     Last Resolved|                            |2012-04-10 19:39:11
--- Comment #2 from Gregory Szorc [:gps] <[email protected]> 2012-04-10
19:39:11 PDT --- Well, this is embarrassing. It looks like one of our
servers was down and for whatever reason we didn't notice.
It should be working now. If you still see errors, please reopen this bug.
Configure bugmail: https://bugzilla.mozilla.org/userprefs.cgi?tab=email
------- You are receiving this mail because: ------- You reported the bug.

Does anyone know of any licensing issues with various Adobe shapes?

I want to use one of the Adobe shapes available in the shape palette ( paw print) for a commercial product, printing it as part of a decorative design on a product. Has anyone heard of any licensing issues with these custom shapes?

Never heard of any issues, and I’d be stunned speechless (if you know me, that means very stunned) if there were an issue. They are provided with the program to add value and allow you to create artwork, much of which is expected to be commercial. Go for it and don’t sweat.

Licensing issues with Trial version?

I'm trying to make changes to a pre-existing Flash file that
I got from someone else. I only have an educational version of
Flash, and I know there are licensing problems with using that for
commercial use...but what about if I downloaded the trial version
and made changes to the file with that?

1)
unable to populate database values at speak List in flash Builder4.6 The fallowing code is used
<fx:Script>
<![CDATA[
   import mx.collections.ArrayCollection;
   private function getIteamCategory():void {
   avar sqlConnection:SQLConnection = new SQLConnection();
var resultSet:SQLResult = null ;
var dataList:ArrayCollection = new ArrayCollection();
sqlConnection.open(File.applicationStorageDirectory.resolvePath("IDatabase.db"));
var stmt:SQLStatement = new SQLStatement();
stmt.sqlConnection = sqlConnection;
   stmt.text="SELECT item_category FROM Menu_Table where item_id between 1 and 99";
stmt.execute();
data_list.dataProvider=new ArrayCollection(stmt.getResult().data);
   sqlConnection.close();
return dataList;
        protected function datalist _creationCompleteHandler (event:FlexEvent):void //executed when the List completes loading
            getIteamCategory ();
]]>
<b/fx:Script>
<s:List id="datalist" x="10" y="10" left="0" right="0" top="0" bottom="0" width="1004"
        height="500"
        creationComplete="datalist _creationCompleteHandler(event)" enabled="true">
    <s:itemRenderer>
        <fx:Component>
            <s:MobileItemRenderer label = "{data. item_category }"/> // The Application is a mobile app
        </fx:Component>
    </s:itemRenderer>
</s:List>
Please suggest, I also included mx.swc file in the build path. Also seeing following several error message, pasting two of them
1120: Access of undefined property ContainerBorderSkin.
1172: Definition mx.skins.spark:ButtonSkin could not be found.          NewIndianCurryHous
Thanks in advance.

Licensing issue with Windows Server 2012 R2 Essential

Hi,
we purchased a server that came with Windows Server 2012 Essentials. and we found out some of the issue regarding the licensing. I would like to verify it with the experts here.
1. This Essential O.S. cannot be deployed as a member server in the domain, only Windows server 2012 r2 Standard and data center is capable as deploy as a member server?
2. does it work with a single domain with multiple domain controllers and one primary domain controller? Example, 10 offices in different states, each location has a domain controller in their office, I'm installing to install this Essential server as another
domain controller in one of the offices for redundancy purpose. I promoted this server into domain controller with success, but it gives me an fsmo error everyday, and warning about shutting down if i don't transfer the fsmo role to this server.
3. which leads to this question, so this Essential OS can only be deploy as a single domain as the primary domain controller? Up to 25 user and 50 device license?
4. Is it possible to deploy it as a domain controller (that office has less than 25 users) in that office while syncing correctly with the other 10 domain controllers in other offices, they are all in the same single domain? I can't make this work, and I
think due to the Essential O.S.'s limitation.
5. we use a vpn connection to connect all the office together, and all the domain controller uses lan ip address to communicate with each other.
Thank you for the help in advance. I have been researching for the past couple days, but I still couldn't get a clear answer. Thank you again.

Hi Cliff,
Thank you for your reply.
1. We will get a new server 2012 r2 standard to deploy as member server.
2 and 3. Only ONE domain controller can hold all FSMO roles in a single domain, correct? Currently an windows 2003 enterprise, this is our first server in our domain, it holds all the FSMO roles currently.
4. Yes, we realized essentials will not work for us, so we are switching to 2012 r2 standard to deploy for the new
domain controller for our new office, still under the same domain.
5. This wasn't a question, just wanted to give out the connection information.
The problem was that We didn't read the Essentials in detail when buying the new server, on dell website, it said it was perfect for small business, we didn't know it has to run as a primary DC. it was great in price, and it doesn't need CALs.
but we quickly realized after deploying it as a DC, it gives us error about Server Licensing compliance, and will shut down automatically. Then we were going to use it as a member server to run application, and realized we couldn't. So we are returning the
server, and getting a new one with standard r2 2012 and CALs license.
It was a costly mistake.
Thank you again.

Creative Cloud license issues with second computer

My company bought CC and I have it installed and running on computer A. However, computer B is having trouble. I've downloaded the CC Desktop, and installed the app's I want on my computer - but when I start a program and it ask's to START TRIAL or LICENSE THIS PRODUCT it asks me for the serial number.
With computer A this didn't happen. All I needed was my account information. Do I need my Admin to send me another invitation for computer B, or is there a technical issue I need to address?
Thanks for the help in advance,
S

MeadowRyan wrote:
Absolutely - every time I close an application and then restart it I am asked to relicense - annoying as can be...
As Ken G. suggested before, you need to update to Photoshop's latest version. To install the update, open Photoshop and choose Help > Updates. That solves the "trial version" issue. At least it did for me.

Rtl co simulation licensing issue with vivado hls 2015.2

ERROR: [Simtcl 6-50] Simulation engine failed to start: A valid license was not found for simulation. Please run the Vivado License Manager for assistance in determining which features and devices are licensed for your system.
I am using 30 day evaluation, c simualtion and c synthesis are workikng but rtl cosimulation not working

Hi
Vivado evaluation license includes HLS license.
http://www.xilinx.com/products/design-tools/vivado/vivado-webpack.html
Please attach the license file along with report_environment.

SMS Notification Issue with ISE 1.3

We have a problem with SMS notification. Please find the attached snapshot of current SMS email gateway configuration. Guest is receiving notification when I am providing the exact mobile number instead of 974$mobilenumber$ in SMTP API destination address: field.
We are running ISE 1.3 with patch level 2.
We are using the the default option (Global Default) SMS Gateway providers for our configuration rather creating a custom. Any luck??
Also i would like to notice If the guest portal is a self-registration portal, we can choose the providers. But there is no such configuration if it’s a sponsored guest portal. Please find the second attachment.

[email protected] is addressed by CSCtu25982. We do not put $mobilenumber$ while defining a SMTP-to-SMS gateway.
<Prefix>[email protected] is being addressed by CSCus78802, which is being included in ISE 1.3 patch 3.

License issue with Intune

In the Intune account portal when I try to assign a Intune license to a user I get the following error :
There was a problem with this user's license assignments.
The user has Intune already installed and is linked to the designated user. Any idea why I get this?
I am assigning with an administrator account and I do have 125 licenses available. (Already using 6 succesfully on other users)
Any help with be appreciated.

Hi
I guess the reason UCCX 8 is stating the package is none because none of the licenses you have received contains the feature which states if the server will act as standard/enhanced/premium package server
====
XXXX CRS_PREICDSRVR cisco 8.0 permanent uncounted \
VENDOR_STRING=1 HOSTID=ANY \
======
The license should have the field as stated above were CRE_PREICDSRVR states this is the base licence with premium pacakage
hope this helps
Anuj

License Issue with 8.0.2 Fresh Build

Guys
We purchased UCCX 7 for an install and then were advised to move to 8. As we had just built the server, with no scripts/users, we thought we would get the disk, blow away the previous install and then put the license on.....so easy in theory.
Went well up to the licensing part, when the licence we got from Cisco failed with a The license for Cisco Unified Standard ESW or UCSS upgrade is not a valid addition for the package None and will therefor be ignored. etc etc etc
Spoke to Cisco who gave us a new license for V8.0.2 install....which failed on The license for Cisco Unified CCX Premium Seat is not a valid addition for the package None and therefore it will be ignored.
When I look to the console and Show UCCX License, it tells me
Package: NoneCisco Unified CCX license package is None. Please upload a valid licence file through Cisco Unified CCX Administration....
Cisco have now escalated this to a TAC engineer, but does anyone have any ideas?
Thanks
Ian

Hi
I guess the reason UCCX 8 is stating the package is none because none of the licenses you have received contains the feature which states if the server will act as standard/enhanced/premium package server
====
XXXX CRS_PREICDSRVR cisco 8.0 permanent uncounted \
VENDOR_STRING=1 HOSTID=ANY \
======
The license should have the field as stated above were CRE_PREICDSRVR states this is the base licence with premium pacakage
hope this helps
Anuj

Licensing issues with altered tools.jar

Hello,
I wanted to know, if it would be permitted if I would ship an edited tools.jar with my application.
I would not charge my customer for the original Java-source code, I would also include the license-files that come along with the tools.jar and I would even make the affected code available publicly. Would that be enough or is it simply prohibited?

Hi,
Note that your version of Ubuntu is beta and we don't support beta software. This means that even if the problem exists and is reproducible we would wait for the open source team to release a production version.
Frank

Licensing issues with Server 2012

Hello everyone,
having an issue getting my licensing server to recognize our remote desktop licences.
I have purchased and installed the license pack, the licensing server is the same machine that the clients will be connecting to. I have also set the licensing mode to per user, but in the diagnoser it still appears as 0 licenses available.
any ideas or other things I can try

Hi Shane,
Thank you for posting in Windows Server Forum.
In addition you can refer following article for information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

License issue with LR5 installed before subscribing to CC

Hi,
I purchased a LR4 license in april 2012.
In august 2012, I subscribed to full CC -and I still have an active subscribtion.
My MacBook has has an LR5 trial version installed.
I I can no more use it, as LR asks for serial number.
So I reinstalled a brand new copy of LR from Creative Cloud manager. I was expecting my active subscription to give me the rights to use it.
But my mac still seems to consider it as a standalone trial version, and asks for a serial #.
What should I try ?
Thanks.

I see that even though you re-installed Lightroom application , it has been reverted as trial.
You can follow below steps:
1)Lightroom does not have uninstaller file for Mac computer installation. Simply Trash the Lightroom application from Applications folder.
2)Trash Adobe Creative Cloud , Adobe Application Manager folders from Utilities , ( No need to run uninstaller file for Creative Cloud).
3)
a) Right click on Finder icon and select "Go-To Folder " option.
b) You will get a text box, type-in below command and then hit 'Return' key.( Do not miss ~ symbol)
~/library
c)Then navigate to Application Support>Adobe.
d)Open Adobe folder and trash folders named AAMUpdater and OOBE.
4)
a) Right click on Finder icon and select "Go-To" Folder option.
b) You will get a text box, type-in below command and then hit 'Return' key.
/library
c)Then navigate to Application Support>Adobe.
d)Open Adobe folder and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.
[Note: Mac computers has 2 libraries : ~/library and /library
5)
Click on the below link and download Adobe Creative Cloud Cleaner tool and run the same:
Select the option Adobe Application manager for Mac OS X and then click on Clean up selected :
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/…
Then click on the below link and download and install Creative Cloud desktop application :
https://creative.adobe.com/products/creative-cloud
Once installation process is completed, sign in and check whether Lightroom is available with Install button and click on install button.
Then launch Lightroom application and check.

License issues with PS CS6

I have been running PS CS6 Extended on my Mac for some time. I recently upgraded to 13.0.2 using the adobe updater, and now I'm getting these warnings that my trial will run out in x days (it's 29 days now). Here's the window I keep getting:
I've even entered my license one time to make it go away, but that only worked for that one session. I am not using creative cloud and I have a local full license. Any ideas?
Thanks,
Dave

You are not the only one. Read these links. http://forums.adobe.com/thread/1114727?tstart=0 and http://forums.adobe.com/thread/1115225?tstart=60

Office 2013 Home and Business License Compatability with Windows Server 2012 R2

Are there any license issues with installing Office 2013 Home and Business on Server 2012 R2 operating system?
I am having inconsistent issues installing this software on a server running this operating system. The Office software is not being acccesed by client workstations. Its a stand alone software installation for the server. Are there any
special installation procedures I must follow or software registration procedures I must follow?
Microsoft website states Office 2013 Home and Business is compatible with Server 2012 but doesnt include the an R2 version reference.

Hi,
Please note only Volume Licensing editions of Office may be used on RDS host server. Since Home and Business is a Retail edition, it's not suitable/permitted if you are using RDS.
Regards,
Melon Chen
TechNet Community Support

License issue with ISE setup

Similar Messages

Maybe you are looking for