LICENSE KEY AND SYSTEM ID CONFLICT

Hello Experts ,
I have the sap netweaver 7.01 installed.I had renewed my key ones before this would have been my second.I followed the usual procedure to obtain a key.But the system wouldnt take it saying its an invalid key.The system id show on the system running 000000000311359785 while the System ID that was show in the email was 000000000311359786.
Any idea wht to do?

I am pretty sure the parameters are correct.I tried requesting keys for the 3 different version.I got 83 84 86 as u can see no 85.
System ID (3 characters):             NSP
System number (18 characters):        000000000311359783
System type:                          Demo system
Software product/release:             SAP NETWEAVER 7.0
System ID (3 characters):             N71
System number (18 characters):        000000000311359984
System type:                          Demo system
Software product/release:             OBS:SAP NETWEAVER 7.1
System ID (3 characters):             NSP
System number (18 characters):        000000000311359786
System type:                          Demo system
Software product/release:             SAP NETWEAVER 04
My system ID is 000000000311359785.
Edited by: Vdigambernath on Mar 31, 2010 5:18 PM

Similar Messages

How to recover lost product license keys and not just Microsoft licenses?

Which products have you tried? Have you looked at Magic Jelly Bean? Depending on the OS and software, some keys are not retrievable. You should also know that certain software are not transferable from one PC to another, reference the license terms of each for clarification.

There are so many products out there that claim to recover lost software license keys and all of the ones I've tried either recover only MS license keys or no keys at all. I'm trying to recover keys from my fathers old system to install on his new one and some of the products he used do not have the keys available. Anyone out there with a viable product key recovery tool that will get back more than just MS license keys?
My father will be greatly pleased.
This topic first appeared in the Spiceworks Community

"Invalid key" error --- License Key for system NSP

Hello SDN Team,
I have successfully installed the NW04 ABAP Sneak Preview. Now I'm trying to get a license for it at http://www.sap.com/solutions/netweaver/minisap.epx. I enter all the data, check the License Agreement, hardware key from Transaction SLICENSE, choose the System NSP and send the form.
I got an email with the following information:
Your Hardware key      : X17xxxxxxxx
Your License Key       : BCBHPS8UVTRYQT8TWURZxxxx
License Expiration date: 20060101
SID                    : NSP
Installation-Nr.       : DEMOSYSTEM
I entered the License Key in the Transaction SLICENSE but I got an error "Invalid key".
How can i get the correct key?
Regards,
James

Hi SAP,
I have the same or a similar problem.
Trying to install the license, I enter the mailed data exactly and properly, however, receive the following error message:
saplicense: License not installed
Wrong license data specified
Check the specified license data for:
- typing errors
- upper / lower characters
- same values as noted on license fax
The same result when I enter the given data via a file...
It looks as an error in the generated LKEY field. Really, something has been changed in the procedure and software during the last 3 months (for example, the new entry field is required now in the request form - SND User id).
Who is responsible and who could help?
Thanks in advance & best regards,
Vladimir

I am having to reinstall Adobe Pro because of a hard drive failure. I have lost the License Key and need to know how to retrieve it so I can reinstall the product.

How do I retrieve the Adobe Pro License key/# so I can reinstall on my computer. I had to have the hard drive replaced due to failure and don't have the necessary information to reinstall Adobe Pro.

As this was a 1,000 USD + purchase I did registered back in 2008 when I got my copy of "Adobe Creative Suite 3 Design Premium". And now I'm in the same situation as you. I did go to manage my account and found my serial number.
My disk crashed completely and I got everything back and running from my Time Machine backup. A few days ago Illustrator said there was a licensing issue. I tried all their gradual solutions up to the very last one: Reinstalling.
I did that and inserted the Serial number; it worked. Now that I'm opening the Adobe Acrobat Pro it requires me to input the serial and it says is invalid!
Anyone has an idea about this?

PCI-E graphics card and system memory conflict.

Hello,
I have a bit of a strange problem with my new system build.
All my parts work fine when used by them selves.
MSI KN8 diamond.
Athlon 3200 64bit 939 Winchester.
Crucial Ballistix PC4000 memory.
Inno3D 6800GT PCI-E
Thermaltake purepower 680W.
The problem arises when I try and use both the memory and graphics card card at the same time, the system does not post stating a memory problem. I know both work as I’m able to post when either is removed i.e when running with a standard PCI graphics card or when the memory is swapped. I’ve checked out a lot of forums over the last 2 weeks and I know there are a lot of people out there running with the same memory. I’ve tried under clocking the memory with no success. Can anyone shed any light on this problem as I’ve never had a conflict between a graphics card and memory before.
Thanks John

Need to make a couple of changes as there appears to be a possible issue with the loading of the Optimized Default setting in the bios, and I quote from MSI:
Quote
After loading the Optimized Default, the memory setting values will be optimized to achieve better performance. It is, however, likely to cause problems of compatibility.
Which seems to be the exact issue you are experiencing. First thing I would do is to manually set your vdimm to 2.8v in the bios. This will make sure that your memory is getting the correct voltages as the AUTO setting usually sets memory to 2.5v. This alone could eliminate your problem, but I think you'll have to comb through your memory timings and reset them, (Crucial lists 2.5-4-4-8 @ DDR500 speeds, so I'd try 2-3-3-6 or 2.5-3-3-6 for DDR400 speeds).
There is also an official bios 1.1 for your board, and a beta (5.01) from the Diamond Club. I'd stay with the official releases for the time being (until you get your board up and running properly).

License Audit and System Measurement for J2EE Systems

Hello,
I'm working on our annual license audit at this time, and for the first time the measurement plan includes non-ABAP systems: Enterprise Portal, Adobe Document Services, NWDI, and even the Java developers' NWDS installations. I'm fully conversant with the use of USMM and SLAW on the ABAP side, but I have no idea how to measure the J2EE systems, and I am unable to find any documentation on this. I did find one powerpoint presentation that talked about measuring Portal and Duet systems, but it's only valid for 6.40-based systems, and we are a 7.00 shop (NetWeaver 2004s). In any case, when I tried the suggestion in the presentation, it simply didn't exist for our Portal or ADS systems on 7.00.
Does anyone have any suggestions for how to proceed?
Thanks,
--Matt

Hi,
Can you please let me know the procedure for SAP license audit.
what is the use of program ZTUTYP_UPD.
Thanks in advance

SQL License Key and KMS

Hello,
I have an SQL Enterprise evaluation instance which I downloaded from MS site and later got to know we have a KMS server, now I need to update the SQL instance with the key from KMS server, how can I achieve this ?? Can you please share some instructions,
resources for this. On my KMS server I have the SQL software with embedded key how can I get the key seperaet to update ? Any thoughts around this too ?
Thanks !!!

http://sqlserver-help.com/2014/06/05/help-how-to-get-product-key-for-sql-server
Before expiring buy a license and move all the DB's and everything to new instance , this is the best approach :)
Agree. It's not known to many that SQL Server 2008 onwards, expired SQL Server can be upgraded to full version.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Why does CC start verification process every time I open it? It even starts asking for license key and sometimes goes into trial mode.

When ever I open Adobe CC it starts verification process and asks for Serial No. And then goes into trial mode. I have to open it several times for it to run in proper licensed mode.

Sign in, activation, or connection errors | CC, CS6, CS5.5
Mylenium

When and how to install a new license key fo SAP Netweaver ABAP Trial 7.0

Hello, i have some questions regarding the license key. I know hoy to install the license key and now everything is working fine but in 10 days my license will expire so... what i have to do ?
1.- I know that i can request a new one. No problem.
2.- I know that i have to logon with user SAP* to install the new license.
Problems:
1.- I´ve just tried to install the new one but i get the following message
This system's system number is "000000000311180667", but there is a license key for system number "000000000311223326" in the license key file.
What i must do, may i have to wait until the actual license expire ? it´s normal this message ? may i have to uninstall the first license key before installing the new one ?
Thanks in advance,
Joaquin Casas Baca-Castex

After installing the license extension, I can login with user SAP* any time, but SAP* cannot do any development tasks.
I cannot login with user BCUSER.
This is very bad, because SLICENSE screen says there is a valid license, the one I got from SDN and installed after editing the NSP.txt file to set the correct SYSTEM-NR
What I am doing now is:
1. Set the Windows clock in the past when the original license is still valid
2. Log in with BCUSER
3. Set the Windows clock back to the present
BCUSER session keeps working fine, but it cannot open new sessions.
Also remote RFC connections will fail, but I am using SAP* for those and it works.

Putting the license key in the installer w/ wix and RDC

Post Author: dblock
CA Forum: Crystal Reports
I am rewriting an old installer in wix (wix.sourceforge.net). The installer deployed RDC "by hand", where they picked the files and stuck them into the InstallShield installer. I got the merge modules instead. The readme for the merge modules says:
license.msm - This merge module is used to apply the license keycode during installation. It exposes a custom property called License Key which must be populated with the keycode found on the Crystal Reports 9 CD envelope. This merge module is always required.
What does this mean? Do I just create a property called License Key and put the key in there? Has anyone done this with wix?
thxdB.

Dell - Internal Use - Confidential
Hello Anubha,
Thank you for getting back to me. The customer has a larger issue than the serial number, he is missing updates and the .Net Framework would not install in order to apply the updates. We will try a new approach to resolve the issue. You can archive this case.
Regards,
Monisa O’Brien
Sr. Technical Support Specialist
Dell | ProSupport
Toll Free 1 866 876 3355
[email protected]<mailto:[email protected]>
My work schedule is 8:30 am - 5:30 pm CST | Mon, Tues, Wed, Thurs, and Fri.
Customer feedback | How am I doing? Please contact my manager Jim Archer<mailto:[email protected]>

I downloaded student version of LR from amazon and the order has a license key but no product key. The verification process asks for product key?

I downloaded the student version of Lightroom 5 from Amazon and cannot complete the verification process. The order has a "license key" and they ask for "product code". The license key on my order will not work as the product code??? What should I do?

When I purchased the student version, everything worked the way it should. The code that was in the package was the code I needed to obtain my serial number. I have not purchased the student version directly from Adobe or anywhere else as a download. You will probably have to contact Amazon or Adobe customer service to have them help you get this straightened out.

SAP License Key configuration procedure in Web AS(J2EE)

Hi,
We installed Web AS 6.4 (J2ee). It is running on temporary license and going to expire in one week time. I applied for license key and got the permanent license key as a text file attachment through email. It is a simple text file containing the license key, system NR and etc. I saved that text file into my machine.
I tried to configure that license file into Web AS using visual administrator.
Server 0 --> Services --> Licensing Adapter --> Install License from file
I selected the text file which was sent by SAP to my mail.
It is giving error like
License file C:\(license file name).txt contains an incorrect SAP license key: Header or empty line expected.
License key(s) not completely installed.
I don't know what to do now. I think we can do through this through cmd. But I don't know how to do that.
Shall I delete the temporary license? Will the system allow me to enter the value manually.
Can any one guide me on this?
Thanks.

Srikishan,
I am getting error lilke this.
D:\usr\sap\SID\SYS\exe\run>saplicense -install
SAPLICENSE (Release 640) ERROR ***
 ERROR: Can not set DbSl trace function
 DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
 RC-INFO: error loading dynamic db-library - check environment for:
 dbms_type = <db-type> (e.g. ora)
 DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
Any idea about it?
I set the system variable like
dbms_type = mss
DIR_LIBRARY = D:\usr\sap\SID\SYS\exe\run
But still getting the error.
Do I need to set dbms_type in environment variables? I don't know it's value. My db is MS SQL DB.
Thanks.

Install License Key for SAP NetWeaver 2004s ABAP trial Edition.

Hello.
I have two installations of the SAP NetWeaver 2004s ABAP trial Edition (on desktop and laptop). After the expiration of the original 30 days license; now I need to install the extended License (90 days). I am using SLICESE transaction from SAP* user account to install the new license. I have got the "License Key" from SAP website. However, the installation of the new License Key fails to complete successfully (it fails to add the new license key) and ends with an error prompt. This problem is happening on both systems! Has anyone experienced such problem? What did you do to fix it?
Note: no errors in typing in the new Key, as I used the copy and paste!
Thank you very much for your help.
Hameed

Rich,
Thanks again for your help. I found out that if you try to install the new license key (first time) with any error (such as wrong expiration date), it will fail as "invalid key", naturally. However, the subsequent attempts also continues to fail despite the fact that the correction are made. the only way I could fix this was to stop and restart the SAP Application server and make sure that the first attempt has typos. It seems to me that once an error flag is set, it is not removed unless the server is restarted. well, the problem is fixed now and thank you for your help.
Hameed

Replace one InDesign license key with another

I work for a software integration company that has helped a customer install InDesign CS 5.5 in a terminal server environment.
InDesign CS 5.5 was installed with a license key obtained from Adobe for X number of users.
Now the customer has obtained from Adobe a new license key for Y number of users.
I cannot find any information on this website or searching the wider web on how, exactly, to get this installation of InDesign CS 5.5 to run with the new license key instead of the old one.
Does anyone know how to do this?

As a practical matter, I don't think it matters too much. There's a certain amount of the "honor system" in volume licensing keys, and the real point is that you paid for the number of seats you are using. If the program doesn't complain about it, I would not spend too-too much time worrying about it.
It's not clear to me if your Y includes your X or not; that is, was X=100 and you added 200 seats and now X=100 and Y=200? Or X=100 and Y=300?
Volume licensing key activations aren't any different from regular license key activations, you can still uninstall (or deactivate, I believe) and install with a new key.
But your "terminal server" environment may complicate the situation if Y does not include X. You could have two seperate installs of ID, or you could have ID installed with either X or Y but not both.
I am not a lawyer and this is not legal advice.

Windows 8 setup does not prompt for license key, then fails, on hp envy notebook

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre
Is it a Chinese Editon preinstalled in HP notebook?
Windows 8 preinstall machine includes a license key in system firmware. So Windows 8 setup will use this key rather than pop up product key input text pop. It is a Microsoft by design issue. So no good mathod to workaround this problem.
http://whqlcn.wordpress.com

LICENSE KEY AND SYSTEM ID CONFLICT

Similar Messages

Maybe you are looking for