License Key could not be installed , Invalid user or password

Hello,
My HANA studio working fine before 2 days. But after installing one CISCO VPN client software on my PC ,I am not able to connect to our HANA box.
Sometime it gives License Key could not be installed(though we have valid license) and sometime Invalid user or password (though my collegues are able to login into system with same user id details from their machine).
I have already reinstalling the HANA studio but no luck. I am able to ping the HANA box as well.
Any hint will be much appreciable.
With Regards,
Rafikul Hussain

Hi,
Thanks for your reply.
No, there is no mismatch between the HANA Studio and the HANA DB server. As both of them are in SPS3 (rev 21).
I asked my colleagues to reset my password and after that from my PC, studio->properties when I put my initial password it will ask to change the password ,i have entered my new password but once its over it shows me the message that the invalid user & password.
regards,
Rafikul Hussain

Similar Messages

SOS! The database does not start and the license key can not be installed.

Hi,
I have installed the SAP Netweaver 200s testdrive on linux x86-64. I have got the hardware key and requested a license key. I have received an E-mail with the license key (N4S.txt) attached.
Unfortunately, I am not able to active the installation with this license.
I always get the error: "open of N4S.txt failed: No such file or directory"
I have renamed the license as N4S.rpm but it still not working.
Furthermore, I could not start the database in the previous step. I have got the error: Database failed to start.
Does anyone already have the same errors? Your help will be so greatful.
Thank you.
Jodie

Hello,
yesterday, I have tried your propositions but nothing doesn´t change.
@Joe
"You might want to check installation log files.."
I do it but I did not see any error.
@Marcel
"Which Linux distro did you use?..."
I have the linux Opensuse 11.1
@Hannes
"you mentioned, that you are not able to start the database. Unfortunately, your error message
does not give us any details of what happened"
I follow the Installation´s help file of SAP, I didn´t have any error before this step of the Installation (Start the Database: entering the command startdb).
1) did the installation finish successfully?
Until the request of the License key, the installation goes without errors.
2) logon as n4sadm (su - n4sadm) and execute: startsap n4shost
What is the output?
"No start profiles found"
3) check /home/n4sadm/startdb.log (or any other start*log files there)
This is the content of the startdb.log file:
lun. mars 2 23:05:13 CET 2009
LOGFILE FOR STARTING DATABASE
Trying to start database ...
lun. mars 2 23:05:13 CET 2009
Checking required environment variables
SAPSYSTEMNAME is >N4S<
Start database with xuserkey >c<
lun. mars 2 23:05:13 CET 2009
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
lun. mars 2 23:05:14 CET 2009
Starting XServer
12798 NISERVER NI support started.
WNG 12453 NISSLSRV NISSL Init: SSL: Could not locate licence file
12902 XSERVER started, 'X64/LINUX 7.6.00 Build 018-123-119-055'
lun. mars 2 23:05:14 CET 2009
Starting database
Starting Database Instance...
Error! XUser not found!
Opening Database...
Error! XUser not found!
lun. mars 2 23:05:15 CET 2009
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed
Thank you for another propositions
Jodie

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can't continue: unexpected failure during app

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben

I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

It does not magically appear in a new place. It will only be where you put it.
Copy everything from your old computer, or your backup copy of your old computer, to your new one.

Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.

html,body{padding:0;margin:0;font-family:Verdana,Geneva,sans-serif;background:#fff;}html{font-size:100%}body{font-size:.75em;line-height:1.5;padding-top:1px;margin-top:-1px;}h1{font-size:2em;margin:.67em 0}h2{font-size:1.5em}h3{font-size:1.16em}h4{font-size:1em}h5{font-size:.83em}h6{font-size:.7em}p{margin:0
0 1em;padding:0 .2em}.t-marker{display:none;}.t-paste-container{;left:-10000px;width:1px;height:1px;overflow:hidden}ul,ol{padding-left:2.5em}a{color:#00a}code, pre{font-size:1.23em}
I get this message on two different machines installing SQL2014 developer edition, a Windows 7 and a Windows 8 machine. Both machines have SQL2005 through SQL2012 developer machines installed and working great. I have tried uninstalling all SQL2014 stuff and
installing again making sure I was running as an Administrator to no avail.
How do I look at sys.key_encryptionswhen the server will not start to finish installation?
The links in the log only provide the "We're Sorry" message.
This is the first error dialog info
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
The SQL Server error log has the message in the title.
2014-04-04 17:02:17.49 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-04-04 17:02:17.49 Server UTC adjustment: -4:00
2014-04-04 17:02:17.49 Server (c) Microsoft Corporation.
2014-04-04 17:02:17.49 Server All rights reserved.
2014-04-04 17:02:17.49 Server Serverprocess ID is 9236.
2014-04-04 17:02:17.49 Server System Manufacturer: 'Hewlett-Packard', System Model: 'HP EliteBook8760w'.
2014-04-04 17:02:17.49 Server Authentication mode is MIXED.
2014-04-04 17:02:17.49 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG'.
2014-04-04 17:02:17.49 Server The service account is 'NT Service\MSSQL$SQL2014'. This is an informational message; no user action is required.
2014-04-04 17:02:17.49 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\mastlog.ldf
2014-04-04 17:02:17.49 Server Command Line Startup Parameters:
-s "SQL2014"
-m "SqlSetup"
-Q
-q "SQL_Latin1_General_CP1_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-04 17:02:17.79 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-04 17:02:17.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-04 17:02:17.79 Server Detected 8142 MB of RAM. This is an informational message; no user action is required.
2014-04-04 17:02:17.80 Server Using conventional memory in the memory manager.
2014-04-04 17:02:17.92 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english1033)
2014-04-04 17:02:17.95 Server Perfmoncounters for resource governor pools and groups failed to initialize and are disabled.
2014-04-04 17:02:17.96 Server Query Store settings initialized with enabled = 1,
2014-04-04 17:02:17.97 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-04 17:02:17.97 Server This instance of SQL Server last reported using a process ID of 8760 at 4/4/2014 5:02:08 PM (local) 4/4/2014 9:02:08 PM (UTC). This is an informational message only; no user action is required.
2014-04-04 17:02:17.97 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-04 17:02:17.97 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-04 17:02:18.00 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-04 17:02:18.00 spid7s Warning ******************
2014-04-04 17:02:18.00 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-04 17:02:18.01 spid7s Starting up database 'master'.
2014-04-04 17:02:18.02 Server Software Usage Metrics is disabled.
2014-04-04 17:02:18.07 Server CLR version v4.0.30319 loaded.
2014-04-04 17:02:18.11 spid7s 8 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.24 spid7s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.25 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-04-04 17:02:18.26 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-04 17:02:18.34 spid7s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2014-04-04 17:02:18.40 spid7s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.40 spid7s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.44 spid7s SQL Trace ID 1 was started by login "sa".
2014-04-04 17:02:18.44 spid7s Server name is 'TOMGROSZKO-HP\SQL2014'. This is an informational message only. No user action is required.
2014-04-04 17:02:18.46 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s Initializing the FallBackcertificate failed with error code: 1, state: 20, error number: 0.
2014-04-04 17:02:18.46 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-04 17:02:18.46 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-04 17:02:18.46 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s SQL Server could not spawn FRunCommunicationsManagerthread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
And a copy of the install log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-04-04 16:23:39
End time: 2014-04-04 17:06:25
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: TOMGROSZKO-HP
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2005 SQL2005 MSSQL.1 Database Engine Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SQL Server Replication
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 Full-Text and Semantic Extractions for Search 1033
Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SharedTools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.2 Analysis Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.3 Reporting Services - Native
1033 Developer Edition (64-bit) 9.00.1399.06 No Yes
SQL Server 2005 DTS
1033 Developer Edition (64-bit) 9.4.5069 No
Yes
SQL Server 2005 Tools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient\Connectivity
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\BOL
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\Samples
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 NS
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Database Engine Services 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 SQL Server Replication 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Full-Text and Semantic Extractions for Search 1033 Developer
Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSAS10_50.SQL2008R2 Analysis Services 1033
Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSRS10_50.SQL2008R2 Reporting Services - Native 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Basic
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Complete
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Connectivity
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Backwards Compatibility
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools SDK
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Integration Services
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Database Engine Services 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 SQL Server Replication 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Full-Text and Semantic Extractions for Search 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Data Quality Services 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSAS11.SQL2012 Analysis Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSRS11.SQL2012 Reporting Services - Native 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Basic
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Complete
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools SDK
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 BIDS
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL Server Data Tools - Business
Intelligence for Visual Studio 2012 1033 11.1.3402.0 No Yes
SQL Server 2012 Integration Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3128.0 No Yes
SQL Server 2012 Master Data Services
1033 Developer Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Downloads\SQL2014\SQL\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SQL2014
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.SQL2014\OLAP\Config
ASDATADIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASLOGDIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSOLAP$SQL2014
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
ASTEMPDIR: C:\SQLData\MSSQL\SQL2014\OLAP
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, MDS
FILESTREAMLEVEL: 3
FILESTREAMSHARENAME: SQL2014
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQL2014
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2014
INSTANCENAME: SQL2014
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer$SQL2014
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQL2014
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
SQLTEMPDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: Documentation Components
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\SystemConfigurationCheck_Report.htm
Any suggestions for what step to take next will be appreciated.
Thanks
Tom G.

Hi Tom,
Sorry for the delay. We can exclude the media factor since you were able to install it on VM with this media.
If I understand correctly, Shanky said “Abve message can also appear due to corrupt profile so deleteting old profile and creating new one and using this to install would also help.Make sure you always RK on setup.exe and select run as administrator” which
means your user account may be corrupted rather than the Virtual account. You can create a new Windows user account and use it to log into the system. Then, re-try the installation.
Additional information:
http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-8
Thanks.
Tracy Cai
TechNet Community Support

Device Enrollment could not be installed due to an unexpected error

Hi I just installed OSX LION Server and want to enroll devices but I keep on getting the error : Device Enrollment could not be installed due to an unexpected error :
The profile “Device Enrollment (com.apple.ota."my-server-name-".private.bootstrap)” could not be installed due to an unexpected error.
My devices site is running properly, I can install Profiles but I cannot install any device, not even the mini I installed OSX Lion Server upon!
I already removed all certificates and keys for : ""my-server-name-".private" and recreated self signed certificates for SSL and code signing.
Any ideas?
Bert

So I just wasted half of a day on this, and at least for my own system I figured it out *without* doing a clean install.
1. First, check that you have opened the ports as suggested by others here.
2. If you've done that, then the problem may be a rogue entry in your DNS server setting. What that means is if you initially set up your server app with one name, then later switched it to a new one, the old name is still "hanging around" causing havoc. This was the problem. To fix, you can try the steps below. WARNING: this will wipe your open directory. Make a full backup! I'm not 100% sure that wiping your OD is necessary, but it worked for me. Turn off any services you're running.
3. Download the 10.7 server admin tools here: http://support.apple.com/kb/DL1419
4. Open up the WorkGroup manager, and select any network users you've created, then export them. You're backing them up because you're going to wipe your open directory.
5. Open Server Admin.app. Click on the reveal triangle for your server, and it will show an entry for "Open Directory". Click on that.
6. Click on the Settings gear in the top of the right panel.
7. Where it says Role: Open Directory Master, hit Change....
8. In the panel that pops up, hit "set up a standalone directory". It will warn you that it's going to wipe your server open directory data.
9. Now, on the left side of the same screen, select DNS, then hit the "zones" button on top.
10. Look for your old host name(s) there. Select any extra entries that have your old host names, and remove. DO NOT REMOVE your current name entry (the Primary Zone) or the reverse entry (Reverse Zone). If you remove those, you'll be totally hosed. Only remove redundant entries.
11. Back in the Server.app, go to the menu and select Manage -> Manage Network Accounts. It will ask you for some information as it sets up open directory again for you. Give it what it needs.
12. To re-import your saved account info, go to Manage -> Import Accounts From File. (I have not tried this step, but it *should* work. YMMV).
13. Now, go reactivate your profile manager, turn on device management. It should "think" for a bit while it churns through the new open directory data.
14. Now, it should work!!! (at least it does for me). I speculate that the name lookup was getting conflicting results from DNS, causing problems and confusion. This seems to have fixed it.
15. If that doesn't work, one other step I took (but it didn't seem to help by itself) was to wipe the device manager database. To do that, open a terminal and use
sudo /usr/share/devicemgr/backend/wipeDB.sh
WARNING: this will wipe any device info that you've set up. I don't think this is necessary, but might be used as a last ditch effort.
Hope that helps!

Mplayer-34426: libX11.so.6: could not read symbols: Invalid operation

After long job I get
/usr/bin/ld: libvo/vo_xv.o: undefined reference to symbol 'XGetWindowAttributes'
/usr/bin/ld: note: 'XGetWindowAttributes' is defined in DSO /usr/lib/libX11.so.6 so try adding it to the linker command line
/usr/lib/libX11.so.6: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make: *** [mplayer] Error 1
==> ERROR: A failure occurred in build().
Aborting...
if it's useful, the PKGBUILD is
# $Id: PKGBUILD 144946 2011-12-11 15:27:00Z ibiru $
# Maintainer : Ionut Biru <[email protected]>
# Contributor: Hugo Doria <[email protected]>
pkgbase=mplayer
pkgname=('mplayer' 'mencoder')
pkgver=34426
pkgrel=1
arch=('i686' 'x86_64')
makedepends=('lame' 'libtheora' 'xvidcore' 'x264' 'faac' 'faad2' 'opencore-amr' 'a52dec' 'libpulse' 'unzip' 'git' 'fontconfig' 'yasm')
license=('GPL')
url="http://www.mplayerhq.hu/"
options=(!buildflags !emptydirs)
source=(ftp://ftp.archlinux.org/other/${pkgname}/${pkgname}-${pkgver}.tar.xz mplayer.desktop)
md5sums=('ff81117293e76b59e54debc439d8e612'
'c0d6ef795cf6de48e3b87ff7c23f0319')
build() {
cd ${srcdir}/${pkgname}
./configure --prefix=/usr \
--enable-runtime-cpudetection \
--disable-gui \
--language=en_US \
--confdir=/etc/mplayer \
--disable-mencoder \
--disable-termcap \
--disable-termios \
--disable-lirc \
--disable-lircc \
--disable-apple-remote \
--disable-apple-ir \
--disable-radio-v4l2 \
--disable-radio-bsdbt848 \
--disable-tv \
--disable-tv-v4l1 \
--disable-tv-v4l2 \
--disable-tv-bsdbt848 \
--disable-pvr \
--disable-rtc \
--disable-winsock2_h \
--disable-smb \
--disable-live \
--disable-nemesi \
--disable-librtmp \
--disable-bluray \
--disable-menu \
--disable-sortsub \
--disable-fribidi \
--disable-enca \
--disable-maemo \
--disable-macosx-finder \
--disable-macosx-bundle \
--disable-vstream \
--disable-w32threads \
--disable-ass-internal \
--disable-ass \
--disable-rpath \
--disable-gif \
--disable-png \
--disable-mng \
--disable-jpeg \
--disable-libcdio \
--disable-liblzo \
--disable-win32dll \
--disable-qtx \
--disable-xanim \
--disable-real \
--disable-libdirac-lavc \
--disable-libschroedinger-lavc \
--disable-libnut \
--disable-vf-lavfi \
--disable-tremor-internal \
--disable-tremor-low \
--disable-tremor \
--disable-speex \
--disable-libgsm \
--disable-ladspa \
--disable-libbs2b \
--disable-libdv \
--disable-mpg123 \
--disable-mad \
--disable-libdca \
--disable-mp3lib \
--disable-musepack \
--disable-vidix \
--disable-vidix-pcidb \
--disable-dhahelper \
--disable-svgalib_helper \
--disable-matrixview \
--disable-dga2 \
--disable-dga1 \
--disable-vesa \
--disable-svga \
--disable-sdl \
--disable-kva \
--disable-aa \
--disable-caca \
--disable-ggi \
--disable-ggiwmh \
--disable-direct3d \
--disable-directx \
--disable-dxr2 \
--disable-dxr3 \
--disable-ivtv \
--disable-v4l2 \
--disable-dvb \
--disable-mga \
--disable-xmga \
--enable-xv \
--enable-xvmc \
--disable-vdpau \
--disable-vm \
--disable-xinerama \
--disable-x11 \
--disable-xshape \
--disable-fbdev \
--disable-mlib \
--disable-3dfx \
--disable-tdfxfb \
--disable-s3fb \
--disable-wii \
--disable-directfb \
--disable-zr \
--disable-bl \
--disable-tdfxvid \
--disable-xvr100 \
--disable-tga \
--disable-pnm \
--disable-md5sum \
--disable-yuv4mpeg \
--disable-corevideo \
--disable-quartz \
--disable-ossaudio \
--disable-arts \
--disable-esd \
--disable-jack \
--disable-openal \
--disable-nas \
--disable-sgiaudio \
--disable-sunaudio \
--disable-kai \
--disable-dart \
--disable-win32waveout \
--disable-coreaudio \
--disable-select \
--charset=UTF-8
[ "$CARCH" = "i686" ] && sed 's|-march=i486|-march=i686|g' -i config.mak
make
package_mplayer() {
pkgdesc="A movie player for linux"
install=mplayer.install
backup=('etc/mplayer/codecs.conf' 'etc/mplayer/input.conf')
depends=('desktop-file-utils' 'ttf-dejavu' 'enca' 'libxss' 'a52dec' 'libvpx' 'lirc-utils' 'x264' 'libmng' 'libdca' 'aalib' 'lame' 'fontconfig' 'libgl'
'libxinerama' 'libvdpau' 'libpulse' 'smbclient' 'xvidcore' 'opencore-amr' 'jack' 'cdparanoia' 'libmad' 'sdl' 'libtheora' 'libcaca' 'libxxf86dga' 'fribidi'
'libjpeg' 'faac' 'faad2' 'libxvmc' 'schroedinger' 'mpg123' 'libass' 'libxxf86vm' 'libbluray')
cd ${srcdir}/${pkgbase}
make DESTDIR=${pkgdir} install-mplayer install-mplayer-man
install -Dm644 etc/{codecs.conf,input.conf,example.conf} ${pkgdir}/etc/mplayer/
install -dm755 ${pkgdir}/usr/share/mplayer/
ln -s /usr/share/fonts/TTF/DejaVuSans.ttf ${pkgdir}/usr/share/mplayer/subfont.ttf
rm -rf ${pkgdir}/usr/share/mplayer/font
#desktop file FS#14770
install -Dm644 ${srcdir}/mplayer.desktop ${pkgdir}/usr/share/applications/mplayer.desktop
install -Dm644 etc/mplayer.png ${pkgdir}/usr/share/pixmaps/mplayer.png
#oops, forgot to remove this, but it does not seem to be a problem
package_mencoder() {
pkgdesc="Free command line video decoding, encoding and filtering tool"
depends=('enca' 'a52dec' 'libvpx' 'x264' 'libmng' 'libdca' 'bzip2' 'lame' 'alsa-lib' 'fontconfig' 'giflib' 'libpng' 'smbclient' 'xvidcore' 'opencore-amr' 'cdparanoia'
'libmad' 'libtheora' 'fribidi' 'libjpeg' 'faac' 'faad2' 'schroedinger' 'mpg123' 'libass' 'libbluray')
cd ${srcdir}/${pkgbase}
make DESTDIR=${pkgdir} install-mencoder install-mencoder-man
find $pkgdir/usr/share/man -name 'mplayer.1' -exec bash -c 'mv "$1" "${1/mplayer/mencoder}"' _ {} \;
Last edited by Doctor Drive (2011-12-20 16:32:10)

May be related to this: https://fedoraproject.org/wiki/Understa … LinkChange

An update tries to run, but an error message stating "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." I can't open Firefox

I click on Firefox and it says that Firefox is installing your updates and will start in a few minutes. Then I get "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." this cycle never ends. Do I need to deinstall Firefox and re-install? If I do that, do i lose all of my bookmarks, etc?

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
*C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
*(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
*C:\Program Files\Mozilla Firefox\updates
*Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
*Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. Do not remove personal data when uninstalling.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Im trying to install iTunes on my friend's Dell XPS, running windows vista ultimate (32-bit), but whenever I reach the end of the install, it pops up with an error telling me: "Service 'Apple Mobile Device' (Apple Mobile Device) could not be instal

Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
"Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I was just told ML could not be installed because apple HD is broken and could not be repaired. I never had any problem ever to suggest a broken HD, on my 2 yr. old mac pro. 10.6.8. Any one else having this problem? Will I get a refund, if so how?

I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
How can I verify the status of the HD, in absence of symptoms for my own information?

mottoo wrote:
I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
How can I verify the status of the HD, in absence of symptoms for my own information?
The solution to your problem is rather simple
1: Get a external hard drive and use Disk Utility to format it with a GUID partition map and OS X extended Journaled.
2: Export your browser bookmarks and any other needed data to a file,. Copy your User data folders of Music, Pictures etc over to the external drive via drag and drop copy methods, disconnect the drive.
I don't advise using TimeMachine at this point since your boot drive is messed up, thus so will be your TM drive, just transfering the problem later on back to the new install. We are proceeding with a "Fresh install" method to eliminate as many issues as possible which a TM restore can return to a new OS X install.
3: Next you will need to follow these instructions to zero erase (important) and install 10.6 fresh, use the same named account (different password ok)
How to erase and install Snow Leopard 10.6
4: Before you return files or install programs, Software Update fully and use the AppStore to install 10.8, this way it will be on a fresh 10.6 install, free of issues.
5: Install any and all 10.8 compatible programs as much as possible before returning your User files, this is a performance measure.
If you need too, use this site to find one's that are 10.8 compatible.
http://roaringapps.com/apps:table
6: Last install your user files from the external drive backup into their respective Music, Pictures, Movies etc., folders, into the same named accounts so you preserve your iTunes playlists. When you open those programs, they will update their respective support files automatically.

Acrobat v10x CS6 Installation: "Some items could not be installed and then Error 1301

Brand new MacBook Pro Retina 16GB, 512SSD, Mountain Lion.
I successfully installed all apps in CS6 Web and Design Premium EXCEPT... I had a warning on Acrobat install: "Some items could not be installed properly".
However, Acrobat 10.0.0 launches and runs fine. Then, I try to move on and upgrade to 10.1.4 (or even 10.0.1) and no matter whether I uninstall and reinstall, repair disk permissions, talk to Adobe support for four times now and let them try everything, I'm still getting Error 1301 "The update could not be applied because Adobe Acrobat application contents were modified since the original installation. I had them send me a hard copy of the CS6 Suite and reinstalled the entire suite. Again, ALL other apps run and upgrade perfectly EXCEPT Acrobat.
Now, support tells me to use the "Run Repair Acrobat Installation to replace missing files." from this advisory and call them back later (file:///Users/mbp/Desktop/extras/maccomputers/Errors%20and%20freezes%20%7C%20Adobe%20Rea der%20%7C%20Mac%20OS.webarchive).
Here's the latest hitch: There is no such: "Repair Acrobat Installation". I'm thinking they think there is and there isn't.
Also, in details this:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW006, DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
ERROR: DW050: - Acrobat X Pro : Install failed
Any wisdom out there which is not in the "experimental" arena would be appreciated.

Hi,
Thanks for the advice. Tried this and does not work. Exact same results. I really wonder if I am the only person with a MacBook Pro Retina with an 512GB SSD running Mountain Lion that has tried to install Acrobat 10.0.0. I think there is some conflict with Mac OS 10.8.2 that is hostile to the installation sequence Adobe created for Acrobat. I fear Adobe would rather I upgrade to Acrobat X1 than spend their time patching this.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW006, DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
ERROR: DW050: - Acrobat X Pro : Install failed

"Sorry, an error has occured. The application could not be installed because the AIR file is damaged

Hello-
I have an air application that is distributed via CDROM, the app is signed by a code signing certificate and timestamped. In mid-August when my certicate expired my users started calling stating that they couldn't install our product due to the following error: "Sorry, an error has occured. The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author." From my understanding a timestamped application is taken at a point in time when it's generated so why would it matter if the certificate was still valid? I have since replaced the certificate and will need to redistribute to my (thousands of) users however when I test it out using a future date and time the same error occurs. Any information to help resolve this would be grately appreciated.

my command:
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adl
application.xml
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adt
-certificate -cn HelloW
orld 1024-RSA certHelloWorld.pfx password
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adt
-package -storetype pkc
s12 -keystore certHelloWorld.pfx HelloWorld.air
application.xml HelloWorld.html
password: password
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>
And here is another link to download my code
http://www.megaupload.com/?d=JS3X2IVC
Thank you.

"The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again"

I'm using Firefox 4 Beta and I tryed install update but I dont got success. Now every time that I go start the browser is displayed the mensage: "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again"
My release is installed not in default drive C:\. I installed in the other Partition on my PC.
I don't have other release installed.

Try a clean re-install.
* Download the setup file from http://www.mozilla.com/en-US/firefox/RC (this is for the Firefox 4 release candidate)
* Uninstall Firefox, do not select the option to "Remove my Firefox personal data"
* Delete the Firefox installation directory - http://kb.mozillazine.org/Installation_directory
* Re-install Firefox
This process does not remove the Firefox user data such as bookmarks and passwords which are stored elsewhere in the profile folder.
You may also need to manually reset the Software Update feature by deleting the software update files as shown in the "Software Update not working properly" section here - http://kb.mozillazine.org/Software_Update

Weblogic upgrade 9.2 - 10.2: Could not perform unpadding: invalid pad byte

While upgrading a domain from 9.2 to 10.2, I get the following error on running upgrade.sh:
-bash-3.00$ ./upgrade.sh
Warning: Cannot convert string "-monotype-arial-regular-r-normal--*-140-*-*-p-*-iso8859-1" to type FontStruct
Calling Wizard framework for upgrade: args2: [-mode=gui, -file=wcf/plugin_gui_wizard.xml, -log=/app/bea/bea_10.2/user_projects/upgrade_logs/domain_04292008_152323_1, -p:plugin:plugin.executionPlan.file=resources/portal-upgrade.xml, -p:plugin:I18N_PLUGIN=weblogic/upgrade/i18n_upgrade, -p:plugin:TARGET_VERSION=10.0.1.0]
weblogic.upgrade.domain.directoryselection.DomainDirectorySelectionPlugIn.validatePlatformDomain: Property set to skip platform domain validation. Skipping...
<apr 29, 2008 3:23:56 PM CEST> <INFO> <Upgrade> <BEA-800000> <If not present, set the source WebLogic Configuration to:9.0>
<apr 29, 2008 3:23:56 PM CEST> <INFO> <Upgrade> <BEA-800000> <If not present, set the source WebLogic Configuration to:9.0>
<apr 29, 2008 3:23:56 PM CEST> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /app/bea_domains/portal>
<apr 29, 2008 3:23:56 PM CEST> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /app/bea_domains/portal>
<apr 29, 2008 3:24:16 PM CEST> <FATAL> <Upgrade> <BEA-800000> <Execute Exception ... weblogic.descriptor.DescriptorException: Unmarshaller failed>
com.bea.plateng.plugin.PlugInException: Execute Exception ... weblogic.descriptor.DescriptorException: Unmarshaller failed
at weblogic.upgrade.domain.directoryselection.DomainDirectorySelectionPlugIn.execute(DomainDirectorySelectionPlugIn.java:261)
at com.bea.plateng.wizard.plugin.silent.tasks.ExecutePlugInTask.execute(ExecutePlugInTask.java:76)
at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:595)
Caused by: weblogic.descriptor.DescriptorException: Unmarshaller failed
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:152)
at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:292)
at weblogic.management.provider.internal.DescriptorManagerHelper.loadDescriptor(DescriptorManagerHelper.java:58)
at weblogic.upgrade.domain.directoryselection.DomainDirectorySelectionPlugIn.parseNewStyleConfig(DomainDirectorySelectionPlugIn.java:416)
at weblogic.upgrade.domain.directoryselection.DomainDirectorySelectionPlugIn.execute(DomainDirectorySelectionPlugIn.java:226)
... 3 more
Caused by: com.bea.xml.XmlException: weblogic.management.ManagementRuntimeException: weblogic.descriptor.DescriptorException: Unmarshaller failed: com.bea.xml.XmlException: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)
at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
Caused by: weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:78)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:94)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:87)
... 55 more
Caused by: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
at com.rsa.jsafe.JA_PKCS5Padding.a(Unknown Source)
at com.rsa.jsafe.JG_BlockCipher.decryptFinal(Unknown Source)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:68)
... 57 more
Before running upgrade.sh, all applications were undeployed from the domain and I've verified that config.xml is valid with no refs to previously installed apps.
I've also removed refs to custom security providers in config.xml, but stil the same.
Can anyone please help?
Edited by mirzaei at 04/29/2008 7:18 AM

Fixed.
The xml-file for one of the jdbc-resources defined in config.xml was missing from DOMAIN_HOME/conf/jdbc. Adding the file fixed the problem.
Edited by mirzaei at 04/29/2008 11:07 AM

Error message 'Could not save to path /Users/yogasail/Documents/' appeared and cannot save files?

I have an iMac 21.5 running OS X 10.9.4:Processor 2.7 GHz Intel Core i5:Memory 8 GB 1600 MHz DDR3. I have suddenly got this message every time I try to save a file -'Could not save to path /Users/yogasail/Documents/Emma/xxxx.rtf. Choose a different path.' Unable to save anything now?? Can anybody help?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

License Key could not be installed , Invalid user or password

Similar Messages

Maybe you are looking for