License Key from Cisco is NOT Working.

Hello All,
Device: Cisco Wireless Controller 2504 (AIR-CT2504-K9)
We had purchased an Access Point Upgrade License for our Wireless Controller and when I try to upload the key to the WLC, I get a message that there were no valid Licenses found. We purchased the License from our 3rd party Cisco provider and our Rep had sent me 2 PAK numbers the other day for the Licenses. So I went on Cisco's site and entered the PAK Numbers (*there were 2 PAK Numbers) and after I entered both of those the SKUs that came up were: L-LIC-CT2504-UPG and L-LIC-CT2504-1A.
So I chose to download the License files and when I did I received a ZIP file containing one html file with instructions and one .lic file containing the License.
Here is what I see when I try:
        (Cisco Controller) > license install tftp://192.168.x.xxx/Cisco_WLC2504_Licenses/license_file_name.lic
        Transfering licenses from tftp://192.168.x.xxx/Cisco_WLC2504_Licenses/license_file_name.lic
        License installation: No valid license found to be installed
Anyone know why I would be receiving this error? I tried uploading to the WLC from both the Web Interface and the CLI with the same result.
I also tried having them email me the .lic file instead but I get the same thing when I try to upload it.
Any ideas?
Thanks,
Matt

Hey Vinod, thanks for the reply!
We had received an Access Point from our Cisco VAR partner and also ordered the License so we could add a 6th AP to the WLC. When we received the AP in the Mail the License was not with it so we emailed our acct rep and asked him for it, which is when they had me run the "show udi" command in order to give them the Serial Number so they could get me the PAK number. Which is I assume what you were talking about with the UDI (Unique Device Identifier)?
The License file itself contains the correct serial number, which is why I'm confused as to why it's not working. We don't have a SmartNet for this device so one of our Techs through our Cisco Var partner is contacting their Cisco Account Rep to find out what's going on. I guess I'll just wait till I hear back from them, and we'll see what they say. I even tried doing the Get Existing option on Cisco.com for the Product License Registration section of the site, which also did not work.
The strange thing is, when I did the Get Existing option and I downloaded the License file again, the Filename was different then it was the first time around... Not sure if this is normal or not, but I just thought that was strange.
Thanks Again for the reply Vinod..!
Thanks,
Matt

Similar Messages

I purchased Lightroom from Amazon. When I go to register, the license key from amazon does not match the fields in the software. I am stuck.

I need help registering Lightroom. Purchased from Amazon. The license key Amazon provided did not match the fields when activating the software. Help!

Maybe Amazon provided a redemption code not a license key:
https://redeem.licenses.adobe.com/getserial

Since the last update yesterday to firefox 4.0.1 my program "asus security protect manager" doesn't work properly. That means, that the saved keys from several websites not remembered for lock in.

since the last update yesterday to firefox 4.0.1 my program “asus security protect manager” doesn’t work properly. That means, that the saved keys from several websites not remembered for lock in.

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
First: Try a clean install, (you have had a none standard version installed previously) that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Second: try a New Profile
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears: "The licensing of the product does not work" Fault 6 How should I proceed? Have the program installed on only one computer.

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
"The licensing of the product does not work"
Fault 6
How should I proceed?
Have the program installed on only one computer.

Download the Adobe Licensing Repair Tool.
Run the License Service Update.
Mac OS X 10.7 and above:
a. Double-click the LicenseRecovery111.dmg It will extract the folder. Open the folder.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type sudo python
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
It should look like this:
h. Enter your administrator user name and password when prompted and click OK.
(Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
Gene

The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?

The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?

Hi Luis Fernando Garcia,
Thanks for using Apple Support Communities. This article has troubleshooting for keys not working on your keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sureMouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, seeUnable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Cheers,
- Ari

Body damage and left and right keys of keyboard is not working

Body damage and left and right keys of keyboard is not working...from where it fix it is possible to change the body and keyboard how much it cost?

Hello @harmankakkar ,
Welcome to the HP Forums!
I understand your notebook has taken on some damage to the chassis and keyboard.
You can find a full list of parts for the product, and the steps to replace them yourself in the Maintenance and Service guide available in the User Guide section on your products support page here: HP - Drivers & Downloads.
You will need your exact product or model number to access this information. For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
Using the part numbers will allow you to search both the HP Part Store and third party vendors (like eBay and Amazon) for the cheapest parts.
You may also want to consider contacting HP Phone Support as they can give you an exact quote on costs for repair to your notebook. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Need help in activation a license key in CCT. It works as a trial now

Need help in activation a license key in CCT. It works as a trial now

1st the sata drive cannot be listed as a slave drive to the ide master [key word=ide-can be configured as master OR slave, master IF only 1 hd, master and slave IF 2 hds], on the sata controler you can have master and slave, the ide cable has two connectors for the hds, sata has only 1 hd connector.
are you wanting to install the sata as primary master and move the operating sys to that drive, if so you will need an IMAGING software to move an operating system OR you could do a fresh operating system install to the sata drive then install your programs.

Short key for copy does not work all the time now.

After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time. It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac. Please help.

I've plugged in my default mac keyboard and the short key copy still does not work.

Consuming PI Webservice from Webdynpro Java Not working

Hello SAP,
Environment: CE 7.2.
Resolution expected immediately, Helpful answer is highly appreciated.
Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
Options tried so far:
1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
3) Changing the Business Systems in PI and there after calling the service - Not worked
4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
For all the Options, I am facing the same error which is provided in the screenshot.
Below procedure which I have followed for calling the PI Webservice:
1) Created Adaptive Webservice Model
2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
3) Selected Option - No Service Group Configuration
4) Provided Logical Destination
6) Completed creation of Model
7) Added the model as a UsedModel
8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
10) Build the project.
11) Activated the code and Run the Application.
12) Getting the below error which is showed in the message.
ERROR MESSAGE:
Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

Hi Sankar,
If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
Please check the code for initialization and execution for the webservice and then test it.
Best Regards,
Arun Jaiswal

Few keys in Keyboard is not working.

Few days back my laptop( HP Pavilion G6) screen got froze(Laptop starting but no display, caps key blinking 3 times) so i checked on internet and come to know its may be because of error in memory module. So i put my RAM in other slot. Now my laptop started but a new issue occured.
Now my caps, B,N ,Del keys in keyboard is not working. I am using Windows 7(64 bit)
Please help me with this issue.

Hi
Please find the steps given below might help you to fix your issue.
Go to device manager & uninstall the keyboard driver and restart the unit.
Please update the driver for Bios.
Try doing a system restore to the date where unit was working fine.
Open command prompt type the letter and check if does not work you might have to replace the keyboard itself.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Select * from tab is not working in oracle 10g

select * from tab is not working in oracle 10g. But at the same time,
select * from <<table>> is working.
Please advise me.

This works for me in 10.2.0.2
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from tab;
TNAME TABTYPE CLUSTERID
LOAN_DETAIL TABLE
PLAN_TABLE TABLE
...

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

HT1349 how can i open the ipad , the slide key on the screen not working.?

how can i open the ipad , the slide key on the sreen not working ?

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

How to transfer license key from Windows to Mac for adobe photoshop lightroom 5?

how to transfer license key from Windows to Mac for adobe photoshop lightroom 5?

You can download from this link and validate with your serial number. You can run LR5 on both machines.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5856

Retrieve license key from Adobe Acrobat X software install

Hello,
Pardon if this is a simple thing to find. My experience with Adobe is pretty much limited to reader and flash.
I am helping a friend here. He is upgrading his old PC to a new PC. He would like to install his old copy of Adobe Acrobat X on it, but lost the license key some time ago. My question is there a way to find the license key from the software itself?

If you don't have any luck with obtaining it from your friend's Adobe account, Belarc Advisor should be able to retrieve it from the PC
Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

License Key from Cisco is NOT Working.

Similar Messages

Maybe you are looking for