License Key installation

Hi All,
We have prepared  a test server having same SID name as our Production server. Now we have to install license on it.
Can we download a new license for test server and install. is any legal problem in it.
if yes pls give steps to download in detail and install.
rgds
Awnindra

There will be no problem what so ever.
Just make sure that you dont run 2 server at the same time for Productive work for long time.
I mean you can install as many  test  system you want. But at time of golive there should be only one production system at the time of Go-live verification by SAP.

Similar Messages

  • License Key installation  - Error from database layer

    when i am trying to install license key i am getting the following error message
    <b>"Error from database layer"</b>
    following are the values passed.
    SAP system = NSP
    Inst. Number = DEMOSYSTEM
    Hardware Kye = XXXXXX
    System Number = left balnk
    Expires on = Expiry date received in themail
    Key = key received in the mail
    Help please
    Regards
    Raja

    I have the same problems... And I tried hard to follow your explanations but I did not manage to get it all sorted... Especially the hint "finally resolved it..." ..."because some tables where missing" didn't help me too much...
    Can you help please?
    The problem:
    I would like to write some programs but I get the error I need a developer id. Therefore I read all the topics about getting a license and the developer key and got the email containing the following:
    "Your Hardware key      : P1297367619
    Your License Key       : TZRNG1J1FOLSOZEZTZ8J8TOP
    License Expiration date: 20060102
    SID                    : NSP
    Installation-Nr.       : DEMOSYSTEM"
    I set it all in the SLICENSE and I got the following error:
    "Error from database layer"
    With some retries I got also the error
    "Invalid license key"
    I am stuck. What do I need to check, do ?
    I am a SAP newbie so please give me directions...
    cheers
      stefan

  • SAP NW CE 73 trail version license key installation shows invalid license

    Hi,
    I have installed SAP NW CE 73 trail version in my system.
    It installed successfully, after I try to install license key using NWA it shows no valid license found.
    Every time after restart it works 10-15 min after that it shows same error message (no valid license found).
    Let me know how to solve my issue.
    Thanks,
    Amith.

    Hi Amith,
    Check these note for self help:
    1968213 - SAP J2EE Engine has license with valid status but still goes down automatically after restart
    1898782 - System restart itself due to invalid license and is not possible to access the NWA to add a valid license
    Regards,
    Divyanshu

  • Error during the installation of permanent license keys

    Dear Experts,
    When applying SAPLicense following error message is geeting, please help how can i resolve this issue
    " Error during the installation of permanent license keys"

    More information needed.
    For example:
    Your SAP version?
    Is it a system copy?
    How exactly did you try to delete from SAP level?
    Without this information, nobody here can do anything but guess.
    There are a lot of SAP notes about similar problems.
    But for this you will have to supply more information.
    Or better; Search in SAP notes yourself!
    And here is my guess:
    SAP Note 917936 - License keys cannot be deleted by user SAP*

  • License Key When Using Executable Windows Installer

    Post Author: Robert Flaherty
    CA Forum: Deployment
    When using the executable Windows Installer for installing the Crystal 2008 runtime files on client PC, do you need to enter your license key?  If you leave the field blank, what happens?

    It sounds like the key you are trying to use is for setting up a KMS, not for activating a windows server station.
    If you want to use a KMS, use the following key:
    http://technet.microsoft.com/en-us/library/jj612867.aspx
    Also be sure to create the service record for the KMS in DNS:
    http://technet.microsoft.com/en-us/library/ff793405.aspx

  • Putting the license key in the installer w/ wix and RDC

    Post Author: dblock
    CA Forum: Crystal Reports
    I am rewriting an old installer in wix (wix.sourceforge.net). The installer deployed RDC "by hand", where they picked the files and stuck them into the InstallShield installer. I got the merge modules instead. The readme for the merge modules says:
    license.msm - This merge module is used to apply the license keycode during installation. It exposes a custom property called License Key which must be populated with the keycode found on the Crystal Reports 9 CD envelope. This merge module is always required. 
    What does this mean? Do I just create a property called License Key and put the key in there? Has anyone done this with wix?
    thxdB.

    Dell - Internal Use - Confidential
    Hello Anubha,
    Thank you for getting back to me. The customer has a larger issue than the serial number, he is missing updates and the .Net Framework would not install in order to apply the updates. We will try a new approach to resolve the issue. You can archive this case.
    Regards,
    Monisa O’Brien
    Sr. Technical Support Specialist
    Dell | ProSupport
    Toll Free 1 866 876 3355
    [email protected]<mailto:[email protected]>
    My work schedule is 8:30 am - 5:30 pm CST | Mon, Tues, Wed, Thurs, and Fri.
    Customer feedback | How am I doing? Please contact my manager Jim Archer<mailto:[email protected]>

  • Installing Sybase SQL Anywhere license keys after initial installation.

    Hi,
    I installed Sybase SQL Anywhere 16 before I actually received the valid License Key. So during the installation I've used the license key provided by the instructions.  Afterwards, I've received the purchase license key.  Do i need to reinstall SQL Anywhere all over?  Or can it just continue to function on that license key?  From what i understand, I can not change the license key after the installation was complete.  I would have to completely uninstall and re-install SQL Anywhere 16. Is that correct?
    Thanks
    Aron

    Hi Aron,
    I would have to completely uninstall and re-install SQL Anywhere 16. Is that correct?
    No, you don't have to do this in SQL Anywhere 16 - you can change SQL Anywhere editions by changing the license key on the accompanying server executable license file (e.g. dbsrv16.lic) with the Server Licensing Utility (dblic). You can use the "-k" switch in order to specify a new key:
    dblic -k <reg_key> dbsrv16.lic
    Regards,
    Jeff Albion
    SAP Active Global Support

  • License key for software installation

    I can not find my license key for the new hp deskjet 1010 printer that I bought and I have the disc that came with the printer but my laptop does not have a place to put a disc in for installation so I tried to download the installation info for my printer from the internet and I keep getting ask for my licensing key number but I dont know where to find this info. Please advise.

    Hi, Which license key are you talking about ? hp deskjet 1010 printer does not require license key to install. Please use the CD which came with the peinter. Regards.

  • Change the license key for BOXI3.1 after installation

    Are there problems if i change the license key for BOXI3.1 after installation?
    (Not performing a upgrade from trial version)
    Or do i have to do a re-installation instead?

    Hi,
    Sure you can change the license key, without re-doing a complete install of BO XI. Just go to CMC->Lisence Keys, and add your new product key.
    Then you 'll see bellow, the new information about u key (CPU/Date limitation).
    Regards
    Olivier

  • Looking for the parameter/command line to supply the license key during the installation of Adobe Captive CS6 application.

    Hello - We are performing customize installation for Captive CS6 with the help of AAMEE tool. We have couple of licenses which we wish to supply over the installation command line during deployment. However we did not find any parameter or the command line which will allow us to enter the license key during installation.  Has any one succeed in finding the command line where we can pass the license key during installation of this application?
    Thanks.

    Can you post the last bit of your log file?  100 or so lines should be plenty to see what's going wrong.

  • License key dissapears after installation of BO Integration Kit for SAP

    Hello,
    I installed BO Edge 3.1 on Suse Linux Enterprise Server 10 (x86_64). After installation I see the license key for 10 named users in CMCand I could add new users.
    Then I installed the BO Integration Kit for SAP. After this installation the license keys are gone. I could not change the new added user and I can not implement the SAP Authentication. The message is "now valid license key for any concurrent user".
    After Deinstallation of BO Integration Kit for SAP with AddOrRemoveProducts.sh the license key is still gone. I am working with permanent license keys from BO.
    Thanks in advance for your help
    Thomas Windischmann

    Hi,
    in the meantime I solved the problem with support from BO. Although I am using the installation software for BO Edge 3.1 and SAP Integration Kit from the same DVD (BOBJ EDGE BI 3.1 Standard Package, #51035489) there is a inconsistency of libkeydecoder.so between BO Edge installation and SAP Kit installation. After installation of SAP Integration Kit you have to replace this lib with the old lib of BO Edge installation.
    Thomas

  • MSCS Installation; Having problem generating temp. license key

    <b>Environment:</b>
    SAP ECC 6.0 (MSCS) installation.
    Windows 2003 Server Enterprise Edition (64 bit Itanium)
    SQL 2005
    We are having a problem with the Central Instance Installation Step at
    the point where you must generate a license key using Solution Manager.
    The installation does not accept any key generated by Solution Manager
    using the virtual host name (SAPCIGRP) - the virtual host name for the
    SAP Cluster Group.
    We greatly appreciate help on this issue so we can finish up
    installation.
    <b>Steps for the Reconstruction </b>
    MSCS Installation ERP 2005 ABAP+Java (ECC 6.0)
    Central Instance Installation Step (Step 8 Installation Guide):
    The Installation asks for Solution Manager License Key.
    In Solution Manager we created the PRD System (SMSY), then select the
    system and select the button "Generate Installation/Upgrade key".
    We enter the following:
    System ID: PRD
    System Number: 02 (also tried 00,01 with no luck)
    Message Server: SAPCIGRP
    [host names for PRD:
    Node A: sapprdci
    Node B: sapprddb
    SAP Cluster Group: sapcigrp (virtual host name)
    SQL Cluster Group: sapdbgrp (virtual host name)]
    The installation also asks for instance number (port) for the central
    instance; we are entering "02". ASCS (Central Services for ABAP)
    is "00" & SCS (Cental Services Instance) is "01".
    Thanks,
    Patrick

    Hi,
    You probably want to look two things here:
    1. Maybe some problem with the system number, I had the same problem before. I thought I should use system number 00, but it was ended up take system number 01. I still don't know why. The installation completed with my system number be 01 instead of 00 I wanted to be.
    2. Because of MSCS installation, does it want to real hostname of the node you are installing or it requires virtual name. I am wondering it is asking hostname of the current node because you should convert it to MSCS cluster after installation complete. Now it does not even know MSCS and virtual hostname etc exist yet.
    Thanks,
    Yujun Ran
    Message was edited by: Yujun Ran

  • Installing the License Key for Solution Manager installation

    Hi,
    Any Idea how can I get License Key for solution manager installation? Solution manager installation do not requires a key of Solution Manager.
    When I want to download a new license file form the SAP market place.SAP I ask for a key of Solution Manager. 
    Thanks

    I guess it is hardware key. Go to the Tcode slicense and there you will be able to find out the active hardware key. Take it!!

  • Acrobat installation license key problem

    I have been trying to install the Technical Communication Suite v1.3. The main installation of FrameMaker, RoboHelp and Captivate seems to have worked fine, accepting our license key and allowing me to register and update the software with the latest patches.
    However, when I try to install Acrobat 9 from the same DVD that Adobe supplied, I just get "Invalid License Key" (using the same key that worked fine this morning for FrameMaker etc).
    Calls to both Adobe Technical Support and Adobe Customer Service have so far produced no useful information. Does anyone have any suggestions, or at least recognise the problem?
    Thanks
    Caroline

    I've had this type of problem before :-(, although not with TCS.
    The simple solution is to invest in one of those handy-dandy CD marker pens (Faber-Castell 1513 works fine) and carefully write the install key(s) on the original Adobe CD/DVD. When installing/re-installing, copy the install key off the media using your neck-top computer and a pencil. No problems.
    Guard the CD's with your life, preferably in a CD rack in a locked cabinet, with an ID tag/bar code on the case. You do have a Master Software database with all the current CD/DVDs and the required [update from] CD's, don't you? Of course you do! And all those lovely extras that came with earlier versions, like the 220 FREE Adobe Type 1 Typefaces that came with FrameMaker 5.5.6 - you didn't throw that out, did you?
    And you do update your asset register with each new item before tax filing time? Smart operator!!!

  • How do I get evaluation license key for linux NW04s installation.

    Can anyone help please.
    I am going through this site on linux , but there is no link to get the evaluation license key for NW04s.
    I downloaded all the binaries.
    Thanks.
    TK

    hi,
    on the installler DVD, you should find README or INSTALL file. You could get from there about the link to extend your eval key.
    ardhian
    http://ardhian.kioslinux.com
    http://sapbasis.wordpress.com

Maybe you are looking for

  • How to get called from R3 on a Sales Order creation

    Hi, I'm completely new on SAP NetWeaver technology. My domain is SAP Business One SDK development and .NET Technologies. What I'm trying to do is some kind of integration between B1 and R3 and for that I need to get called in my .NET application by a

  • Apple TV Black Screen Unless I Reset

    Hi, I've been using a Gen2 apple tv for years and got a Gen3 for my parents for Christmas.  I set it up on their TV and everything worked fine.  After turning it off so I could show my parents how to use it, the light lit up on the front (stayed lit)

  • Dual monitors with HDMI Splitter

    I am wanting to use my ATV 2 at work to run a slideshow on 2 monitors. I bought an HDMI Splitter but it just has a black screen. If I hook up 1 HDMI it works fine. Any ideas?

  • Firewire 800 front port problem

    I'm using an RME Fireface 800 audio interface, which is a Firewire 800 device. When I hook it up to the front FW800 port on my Mac Pro, it is periodically disconnecting while in use (using Logic, Final Cut Pro, etc.). To be clear, I don't mean that t

  • Can't recover songs and itunes very slow

    My computer crashed and had to be totally restored so I lost itunes and everything. I downloaded it again and proceeded to try to sync with my nano. First of all, itunes was running way slow...so slow that I thought the computer was freezing but its