License Manager won't start

After some hunting I found this error in the debug log:
2007-02-05 15:18:07,326 DEBUG [agent.actions] [PoolThread-8] In BaseAction.getEvent() : Event to be performed is :start
2007-02-05 15:18:07,326 DEBUG [agent.actions] [PoolThread-8] In SystemConfigAction.localExecute : Event to be handled is : start
2007-02-05 15:18:07,326 DEBUG [flexnet.agent] [PoolThread-8] Discovering license servers
2007-02-05 15:18:07,326 DEBUG [flexnet.agent] [PoolThread-8] Discovering license server: NPU - Adobe Licensing Server
2007-02-05 15:18:09,607 FATAL [agent.actions] [PoolThread-8] SystemConfigAction.start() : Unableto start the license server :
java.rmi.RemoteException: This FLEXnet Agent supports more than one license server. Some license server(s) use default port number "ANY". Please change them to other port numbers.
at com.macrovision.flexnet.agent.Licens eDiscovery.getLmgrdInfo(LicenseDiscovery .java:1860)
at com.macrovision.flexnet.agent.Licens eDiscovery.createLicenseServer(LicenseDi scovery.java:557)
at com.macrovision.flexnet.agent.Licens eDiscovery.discoverLicenseServers(Licens eDiscovery.java:439)
at com.macrovision.flexnet.web.agent.ac tions.SystemConfigAction.start(SystemCon figAction.java:471)
at com.macrovision.flexnet.web.agent.ac tions.SystemConfigAction.localExecute(Sy stemConfigAction.java:88)
at com.macrovision.flexnet.web.agent.ac tions.BaseAction.execute(BaseAction.java :77)
at org.apache.struts.action.RequestProc essor.processActionPerform(RequestProces sor.java:484)
at org.apache.struts.action.RequestProc essor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServl et.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServl et.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.servi ce(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.servi ce(HttpServlet.java:853)
at org.mortbay.jetty.servlet.ServletHol der.handle(ServletHolder.java:358)
at org.mortbay.jetty.servlet.WebApplica tionHandler$Chain.doFilter(WebApplicatio nHandler.java:342)
at com.macrovision.flexnet.web.platform .filters.SetCharacterEncodingFilter.doFi lter(SetCharacterEncodingFilter.java:108 )
at org.mortbay.jetty.servlet.WebApplica tionHandler$Chain.doFilter(WebApplicatio nHandler.java:334)
at org.mortbay.jetty.servlet.WebApplica tionHandler.dispatch(WebApplicationHandl er.java:286)
at org.mortbay.jetty.servlet.ServletHan dler.handle(ServletHandler.java:567)
at org.mortbay.http.HttpContext.handle( HttpContext.java:1807)
at org.mortbay.jetty.servlet.WebApplica tionContext.handle(WebApplicationContext .java:525)
at org.mortbay.http.HttpContext.handle( HttpContext.java:1757)
at org.mortbay.jetty.plus.PlusWebAppCon text.handle(PlusWebAppContext.java:218)
at org.mortbay.http.HttpServer.service( HttpServer.java:879)
at org.mortbay.http.HttpConnection.serv ice(HttpConnection.java:790)
at org.mortbay.http.HttpConnection.hand leNext(HttpConnection.java:961)
at org.mortbay.http.HttpConnection.hand le(HttpConnection.java:807)
at org.mortbay.http.SocketListener.hand leConnection(SocketListener.java:197)
at org.mortbay.util.ThreadedServer.hand le(ThreadedServer.java:276)
at org.mortbay.util.ThreadPool$PoolThre ad.run(ThreadPool.java:511)
WTF does this mean? Docs don't cover this? Thought the product mapping file might provide more info, but it doesn't seem to exist?
Is this some half baked product or what?

Mr. Gurtz,
According to the log:
"2007-02-05 15:18:09,607 FATAL [agent.actions] [PoolThread-8] SystemConfigAction.start() : Unableto start the license server :
java.rmi.RemoteException: This FLEXnet Agent supports more than one license server. Some license server(s) use default port number "ANY". Please change them to other port numbers."
It seems you already have a FLEXnet server already running on your machine. Can you verify that this is the case? One way to verify is to go to the directory where the License Server is installed (the default is "C:\Program Files\Adobe\License Server Tools\bin") and type "lmutil lmdown". This will list all the vendor daemons that are currently running on your machine. If you already have a FLEXnet license server running, note the port number. Macrovision FLEXnet by default uses port 27000-20009, so if you have more than one vendor daemon running one one machine, you should explicitly declare a port for each vendor daemon (so there won't be a port conflict). Page 8 of the Server Tools user guide explains how to do this.

Similar Messages

Password Manager won't start

Password Manager won't start. If I click on the ThinkVantage icon and go to Security, Protection, and Recovery > Manage passwords, it makes the system tray icon show up but it doesn't fill in passwords. If I right click on the system tray icon and click Open Password Manager... it doesn't do anything.
Any ideas?

jpd111 wrote:
I loaded them up, rebooted and everything is fine now.
Welcome to the forum, jpd111, and congratulations on being our 20,000th new member!
And thanks to Justin for sharing his knowledge and experience with others!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Fabric Manager won't Start

I upgraded to 3.1(2a) and then I reinstalled Fabric Manger and Device Manager. Fabric Manager won't start, error is "Unable to connect to server! Admin login from 127.0.0.1 failed". Device Manager is fine.

I am running into the same situation but with FM(3.0.2a) on a Windows Server 2003. We are using Citrix for FM client login. Looking at the windows services FM server services is in running status. The second login attempt would work, not sure why?
When log in locally via windows remote desktop connection we get these error dialogs "ERROR Open Fabric - Fabric Manager 3.0(2a) Error in register for events: Connection refused to host: 10.1.x.x;nested exception is:java.net.ConnectException: Connection timed out: connect
and
NoSuchOject: no such object in table
After clear these dialogs the second attempt with work.
I can see login issues from remote client but even locally on the server? Any suggestions?
Thanks,

Recovery manager won't start for clean reinstall of Windows 7

I have an HP Pavilion Elite HPE-110f that is 4 years old. Everything was fine until a couple of weeks ago started getting RAID messages on startup and other little qwerky things. Then last week the dreaded BSOD showed up. I shut down the computer and tried to restart, but got error messages that the computer couldn't start. I then tried everything I could think of - startup repair, tried to boot in safe mode, recovery from partitioned drive, system restore - nothing worked. I have the recovery media from HP but was saving that as my final option. I tried to do a clean reinstall today from the discs, but now the recovery manager won't even come up. Can somebody PLEASE help me get my OS back?

No, it wasn't an error message. It was just notifications about different things being accessed on port1. I just assumed it was startup items loading, but I had never gotten notifications about them before. I just tried again to reinstall from recovery discs. Pressed esc and got the boot menu, selected the dvd drive and you can hear it running, then it slows down to nothing and I get no recovery manager opening. I turned off the computer again and pressed f9 when I turned it on. Diagnostic show processor and memory are fine, but I get an error code of "BIOHD-8" on the hard drive. Any suggestions?

Daemon manager won't start

After doing a fresh install of Cisco Prime 4.1 and rebooting the server 'Cisco Prime Daemon Manager' service won't start. Startup type is 'Auto'. Server has been rebooted twice and I have tried 'net start crmdmgtd' without success.
C:\Users\NetAdmin>net start crmdmgtd
The Cisco Prime Daemon Manager service is starting.
The Cisco Prime Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
C:\Users\NetAdmin>net helpmsg 3534
The service did not report an error.
C:\Users\NetAdmin>

I need to see following output:
> Output when you enter command : net start crmdmgtd (on command prompt)
> Last 100 lines of NMSROOT/log/syslog.log
> event logs, if anything pertainign to Ciscoworks processes.
Try following things as well:
# Make casuser a member of adminitrators group.
#Make sure you have swap properly and manually configured (twice of RMA):
1. Right click on "Computer" and select "Properties." Click on "Advanced System Settings."
2. Choose the "Advanced" tab and click "Settings," under "Performance."
3. Choose the "Advanced" tab and click "Change" under "Virtual Memory."
4. Uncheck "Automatically Manage Paging File Size" for all drives.
5. Click "Custom Size" and enter the amount of swap space in MB (megabytes). Click "Set" and then "OK" three times to return to the desktop.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

Software licensing service won't start after sql server upgrade

having issues with windows server 2008 sp2 64 bit OS where the software license service do not start. and see the server as not genuine. when i run net start slsvc, I got a system error has occurred. system error 34 has occurred. the wrong diskette
is in the drive. insert *** (volume Serial Number: ***) into drive ***.
I try chkdsk and sfc/scannow. nothing seems to work.
thank you for your help

Hi,
Please try the steps below to resolve the issue:
1.net stop slsvc (select yes) in my case it was already stopped.
2.in command prompt type:
3.cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
4.rename the tokens.dat file: ren tokens.dat tokens.old
5.still in the command prompt type cd %windir%\system32
6.type net start slsvc
7.type cscript slmgr.vbs -rilc (this may take a long time)
8.Then reboot the machine twice !!!
9.slmgr.vbs –ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (assuming you have a MAK key, not a KMS key)
10.To activate your OS, just type: slmgr.vbs –ato
If there any other error message? You could refer to the article below to troubleshoot the issue:
How to troubleshoot Volume Activation error codes in Windows 7, in Windows Server 2008, and in Windows Vista
http://support.microsoft.com/default.aspx?scid=kb;EN-US;938450
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Desktop manager won't start, sometimes

Edit: I have migrated from kdm to sddm and the problem is just the same.
I have a really weird problem with my laptop (Lenovo E335):
Sometimes, when I boot/reboot my laptop, kdm is started correctly, but other times (maybe more often) kdm won't start, and I need to login as root in a terminal, and run:
$ systemctl restart kdm
After doing this, kdm is always restarted correctly.
Whenever I boot/reboot the system, before kdm is started or fails, I see always these text lines in the console:
[FAILED] Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video
See "systemctl status systemd-backlight@backlight:acpi_video2.service" for details.
Starting Load/Save Screen Backlight Brightness of backlight:radeon_bl0...
[OK] Started Load/Save Screen Backlight Brightness of backlight:radeon_bl0.
When kdm fails, the boot process ends with this screen, and then I have to press Ctrl+Alt+F1 to open the terminal.
When this happens, these lines can be read in /var/log/Xorg.0.log:
(EE) Screen0 deleted because no matching config section.
(II) UnloadModule: "radeon".
(EE) Device(s) detected, but none match those in the config file.
(EE) no screens found(EE)
What puzzles me is that this only happens sometimes, apparently randomly.
--mod note: changed img tags to url tags. -- WorMzy
Last edited by fahrgast (2015-05-13 20:40:02)

Hi fahrgast, welcome to Arch.
Please take a moment to read through the forum etiquette, paying particular attention to the section titled "Pasting pictures and code".
https://wiki.archlinux.org/index.php/Forum_etiquette
Thanks.

[SOLVED]Modem-manager won't start with Network manager

Hi,
I have a problem with getting modem-manager work under gnome. After first Arch install to this laptop, Network manager didn't show my 3G-modem, so I installed modem-manager and usb_modeswitch. Modem is Huawei E367 and it works well with wvdial. Only problem is to get it working with Network manager.
From output of dmesg I see that there is an error, when Network manager is trying to start modem-manager:
[ 3224.705193] do_trap: 322 callbacks suppressed
[ 3224.705198] modem-manager[3112] trap int3 ip:7ff7baab4143 sp:7fff996e62b0 error:0
[ 3224.719275] modem-manager[3114] trap int3 ip:7f58f4c5e143 sp:7fffc82b2400 error:0
[ 3224.733880] modem-manager[3116] trap int3 ip:7f579dda4143 sp:7fff77910850 error:0
[ 3224.748789] modem-manager[3118] trap int3 ip:7ff752c6f143 sp:7fff8ae42e20 error:0
[ 3224.763501] modem-manager[3120] trap int3 ip:7fb4db83f143 sp:7fff3023cbf0 error:0
[ 3224.777865] modem-manager[3122] trap int3 ip:7fa17a33a143 sp:7fffc1628260 error:0
[ 3224.792165] modem-manager[3124] trap int3 ip:7f00a39fb143 sp:7fff075a0fb0 error:0
[ 3224.806603] modem-manager[3126] trap int3 ip:7f9a62e23143 sp:7fffc2ccfed0 error:0
[ 3224.820736] modem-manager[3128] trap int3 ip:7f3d2994d143 sp:7ffff2581340 error:0
[ 3224.834985] modem-manager[3130] trap int3 ip:7f5adda9a143 sp:7fff8a70a4a0 error:0
From /var/log/messages.log I found also something:
Apr 14 16:02:14 localhost NetworkManager[713]: <info> trying to start the modem manager...
Apr 14 16:02:14 localhost dbus[651]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
Apr 14 16:02:14 localhost dbus[651]: [system] Successfully activated service 'org.freedesktop.ModemManager'
Apr 14 16:02:14 localhost NetworkManager[713]: <info> modem-manager is now available
Apr 14 16:02:14 localhost modem-manager: libhal_ctx_init() failed: (null)
Apr 14 16:02:14 localhost NetworkManager[713]: <info> the modem manager disappeared
If I try to run modem-manager manually with debug:
$ sudo modem-manager --debug
** ERROR **: libhal_ctx_init() failed: (null)
Make sure the hal daemon is running?
So it seems to be because of hal isn't running, if I try to start hal daemon it fails:
$ sudo /etc/rc.d/hal start
:: Starting Hardware Abstraction Layer [FAIL]
I also tried to start hal at boot by putting it to DAEMONS in rc.conf. but didn't start either.
The laptop is Asus X61SL with x86_64 version of ArchLinux.
Kernel: 3.3.1-1-ARCH
Would be cool if anyone can solve this.
Last edited by Jompu (2012-04-14 20:42:20)

Thanks for your quick reply Strike0!
I ran lsusb and usb_modeswitch as you instructed:
[louis@Louis-Laptop ~]$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 002 Device 002: ID 045e:00dd Microsoft Corp. Comfort Curve Keyboard 2000 V1.0
Bus 003 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver
Bus 001 Device 006: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard
[louis@Louis-Laptop ~]$ sudo usb_modeswitch -v 12d1 -p 1506 -M '55534243123456780000000000000011062000000100000000000000000000'
Password:
Looking for default devices ...
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Accessing device 006 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x82 (in)
Not a storage device, skipping SCSI inquiry
USB description data (for identification)
Manufacturer: Huawei Technologies
Product: HUAWEI Mobile
Serial No.: not provided
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x82
Resetting message endpoint 0x01
-> Run lsusb to note any changes. Bye.
It didn't help. Network manager doesn't show anything related 3G.
I don't think it's usb_modeswitch since 3G stick works great with wvdial on same system. Could it be a bug on modem-manager?
I start only the Network manager on boot, but while Network manager tries to start modem-manager, it throws error continuously in dmesg. Error is the same as in first post.

Android Studio SDK Manager Won't Start

I download the newest version of Android Studio from Google. You know there's something wrong to install it from AUR in China.
But when I click the SDK Manager button in Android Studio, the Manager does not start.
And then I go to the "android-studio/sdk/tools/" folder to run "./android"
$ ./android
The program 'Android SDK Manager' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadMatch (invalid parameter attributes)'.
(Details: serial 1968 error_code 8 request_code 139 minor_code 4)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
Some infomation:
$ uname -a
Linux arch 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64 GNU/Linux
Thanks for your help:)

Thanks very much for your reply.
But It does not work, while shows as followed
$ ./android --sync
Error: Flag '--sync' is not a valid global flag. Did you mean to specify it after the verb/object name?
Usage:
android [global options] action [action options]
Global options:
-s --silent : Silent mode, shows errors only.
-v --verbose : Verbose mode, shows errors, warnings and all messages.
--clear-cache: Clear the SDK Manager repository manifest cache.
-h --help : Help on a specific command.
Valid
actions
are
composed
of a verb
and an
optional
direct
object:
- sdk : Displays the SDK Manager window.
- avd : Displays the AVD Manager window.
- list : Lists existing targets or virtual devices.
- list avd : Lists existing Android Virtual Devices.
- list target : Lists existing targets.
- list device : Lists existing devices.
- list sdk : Lists remote SDK repository.
- create avd : Creates a new Android Virtual Device.
- move avd : Moves or renames an Android Virtual Device.
- delete avd : Deletes an Android Virtual Device.
- update avd : Updates an Android Virtual Device to match the folders
of a new SDK.
- create project : Creates a new Android project.
- update project : Updates an Android project (must already have an
AndroidManifest.xml).
- create test-project : Creates a new Android project for a test package.
- update test-project : Updates the Android project for a test package (must
already have an AndroidManifest.xml).
- create lib-project : Creates a new Android library project.
- update lib-project : Updates an Android library project (must already have
an AndroidManifest.xml).
- create uitest-project: Creates a new UI test project.
- update adb : Updates adb to support the USB devices declared in the
SDK add-ons.
- update sdk : Updates the SDK by suggesting new platforms to install
if available.
Napaim wrote:
Did you recently do a system update?
From searching around it seems like it's a graphical problem or a font problem.
Also maybe try running `./android --sync` just to see if there's a different output.

My license manager won't open. Can I get a new lm somewhere?

My disconnected license has expired so I obtained a new one. I try to open NI license manager, and I keep getting this message box telling me it encountered an error and needs to close. Something is obviously corrupted. Where can I get an 'updated' license manager?

Hi Farm Boy,
Can you add a screenshot of the error message? As far as I know, you'll have to reinstall the software to reinstall the license manger.

NI License manager does not start; says it's querying for current license status

I currently have the evaluation version of Labview. I tried to use a volume license from my university by typing in the server name in NI License Manager, but after that, whenever I try to open the license manager, it looks like it's stuck saying "querying for the current license status" and never actually opens. Also, when I try to open Labview, it freezes during the setup finalization. I realized afterward that students don't have access to the university license for their own PC's, so I can't use that volume license anyway.
I uninstalled everything having to do with NI on my PC and reinstalled the evaluation version of Labview, but the same problem still exists. Is there anything I could do besides erasing my hard drive?
Solved!
Go to Solution.

Hi amize,
When you say the same problem still exists, is it both the NI License Manager and LabVIEW that are still having the issues? When you open the License Manager and it is not actually opening does that mean you cannot interact with it or the licenses never finish loading in the tree view on the left hand side. If you do have access to the Options menu, open preferences and make sure you have deselected "Use Volume License Servers". At some point, if the windows is not interactive, it should timeout with attempting to make its server connection, especially if you are disconnected from any network connection.
Also, how long do you wait when you open LabVIEW and see the setup screen? Does it just become unresponsive?
If you could follow up with that information it would be much appreciated
Regards,
James W.
Applications Engineer
National Instruments

Firefox won't start, profile manager won't start, but firefox.exe shows in processes list (task manager)

Firefox will not start, even though it is listed in my processes in task manager. Can't get profile manager to start either.
I have tried the following to no avail:
- try to start FF in Safe Mode, doesn't load
- started Windows Vista in Safe Mode, FF still does not load
- turned off Kaspersky AV, FF still does not load
- uninstalled FF, cleaned out user/####/AppData/Mozilla/Firefox folder, as well as ProgramFiles/Mozilla/Firefox folder, and cleaned our Registry manually from all references to Firefox. Downloaded FF 3.6.3, installed. still does not load
- whatever i seem to do, does not fix the problem. When I try to start Firefox, no window appears. I can see the process starting in my task manager. I can "end process" and try to start the program again by double-clicking program icon. Process starts in task manager, but no app window appears.
I am frustrated and have just wasted 2+hours of my night trying to get this to work. Downloaded Google Chrome, unless there is a fix for FF (which I would prefer to use), i will have to switch to Chrome.
I can't pinpoint when this trouble started, but may have been after a recent Windows Update. I already did a System Restore to a restore point about 5 days ago (the oldest one available to me, and I believe that was before the FF trouble started). This has not helped either.
I have run a full virus scan with Kaspersky and a Full scan with Windows Defender. Nothing came up.
Anyone else been able to find a solution to this?
== This happened ==
Every time Firefox opened
== Less than a week ago ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.86 Safari/533.4

I found a way to make it work somehow but not really fixing the error... one day when I got really pissed off because FF just won't open, I clicked the icon and killed the enter button, then multiple FF windows appeared. I tried to open it with just a single hit of the enter or double clicking but it won't work anymore, but repeatedly clicking the enter button (mine works with just 3 hits, sometimes 6) seem to open it. And until now, I have no technical explanation for this.

Sync on desktop manager won't start with new 9700

I am attaching my 9700, with a USB cable, to my laptop. The Desktop Manager software opens but it will not start the sync'ing process with my device.
- the little "check" box - "automatically synchronize device and computer when USB connected" is switched on
- I am using the latest version of Desktop Manager
- the "Synchronize" tab is in grey. It's grey'ed out. When my curser hovers over "Synchronize" it won't light up, as in, it won't let me press the Synchronize button to initiate the process.
- my 9700 is brand new. I had no synchronizing problems with my previous model, the Curve.
- my laptop is a great device, I don't currently, nor haven't had, any issues with it in the past - DELL D420 Latitude. I seem to have all the drivers I need
- I am running Windows XP
- I am not linking to a server at work. My Blackberry is set is purely a directly link from the 9700 device, to my computer, and syncs with the calendar, address book and tasks list (MS Outlook 2003 from MS Office)
- my new 9700 - I bought it 2weeks ago. It did sync in the beginning. About three times successfully. But not now obviously.
- on my Windows bar at the bottom of my computer screen it pops up "new hardware added" and the 9700 device is no longer described by its identity number (PIN ref?), it says "new hardware added, 'memory device'"
- I've searched through the Blackberry help pages and so far, all I can come up with is that my computer can't seem to recognise now, for some unknown reason, that it is connected to my 9700. Blackberry help suggested I go to the "pairing" pages of the Help guide, but I thought "pairing" was only a subject that involves Bluetooth activities. Not a USB cable connection.
Anyone got any ideas?

Hey Graeme0309,
If you disconnect the BlackBerry from your computer and open Desktop Manager, are you able to open Synchronize?
What version of BlackBerry Desktop Manager are you using?
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

HELP entreprise manager won't start in windows 7 !

SYSTEM information : windows 7 ultimate WITH Oracle DATABASE 11gR2
I'm connected with a windows user that reside in ora_dba and administrator groups
I execute all commands with "run as administrator"
+'administrator' is also in ora_dba group+
after installing oracle software I executed dbca to create a new database, but after the creation dbconsole won't run!
*>emctl start dbconsole* gives me An instance of Oracle Enterprise Manager 11g Database Control is already running
and the service 'oracleDbConsoleorcl' is not started, when I start it mannually it gives me windows could not start the service in local computer
so now I know that this errors is caused by a running process, it's the 'java.exe : 5520', I kill it and try to start dbconsole again:
*>emctl start dbconsole* it gives me
The OracleDBConsoleorcl service could not be started
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
and of course the result of *>NET HELPMSG 3547* is A service specific error occurred: *** :/
so I tried to recreate the repository but after the creation (successful) the result is the same errors when I want start dbconsole :
*>emca -config dbcontrol db -repos recreate*
You have specified the following settings
Database ORACLE_HOME ................ d:\app\oracle\database\product\11.2.0\dbhome_1
Local hostname ................ localhost
Listener ORACLE_HOME ................ d:\app\oracle\database\product\11.2.0\dbhome_1
Listener port number ................ 1521
Database SID ................ orcl
_.... no warning or errors ..._
Sep 19, 2012 10:11:13 PM oracle.sysman.emcp.EMDBPostConfig invoke
WARNING: Error starting Database Control.Please execute the following command(s)
+1) Set the environment variable ORACLE_UNQNAME to Database unique name+
+2) d:\app\oracle\database\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole+
but ORACLEUNQNAME is already set !_
C:\Windows\system32>set oracle
ORACLE_HOSTNAME=localhost
ORACLE_SID=orcl
ORACLE_UNQNAME=orcl
C:\Windows\system32>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://localhost:1158/em/console/aboutApplication
- An instance of Oracle Enterprise Manager 11g Database Control is already running. //_the same error before I recreate the repos_
C:\Windows\system32>emctl status agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent is Not Running
what's wrong ????

I had the same problem.
This was beacause the OS time setting that did not corresponds to the regional setting.
In my case, the daylight saving time.

HP Device Manager won't start.

I'm trying to start HP Device Manager but it won't work. First i tryed just buy clicking on it in my menu but nothing happened. Then i ran hp-tools in the terminal but just this came up:
[jakob@Katten applications]$ hp-toolbox
HP Linux Imaging and Printing System (ver. 3.11.12)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: Qt/PyQt 4 initialization failed.
error: hp-toolbox requires GUI support. Exiting.
As you can see here i've installed pyqt but it still won't run. I've even tryed the pyqt3 but it still didn't start. So how do i get this program running?
[jakob@Katten applications]$ pacman -Ss pyqt
extra/eric 5.1.7-1
A full-featured Python 3.x and Ruby IDE in PyQt4
extra/eric4 4.4.19-1
A full-featured Python 2.x and Ruby IDE in PyQt4
extra/pyqt 4.9-2 [installed]
A set of Python 3.x bindings for the Qt toolkit
extra/python2-pyqt 4.9-2
A set of Python 2.x bindings for the Qt toolkit
community/pyqt3 3.18.1-9
A set of Python bindings for the Qt3 toolkit

HarlemSquirrel, please read the forum rules. Necrobumping threads, especially with empty/power posts is not allowed.
Closing...

License Manager won't start

Similar Messages

Maybe you are looking for