LICENSE MISMATCH error on launch

I'm receiving the following error on launch of Here Drive Beta:
    LICENSE MISMATCH
    Your navigation license isn't valid in this country or area
    MCC=208
Here Drive was functioning perfectly for me in the US. I have TMobile HTC 8x. I recently moved to France, when I first tried to use the app it launched but gave me an error about not being able to perform navigation (which is expected based on the license from Nokia).
I've unlocked my phone and I'm on a French carrier (Free). I've uninstalled and reinstalled the app but I'm getting this error each time I try to use the app. From what I understand, the Here Drive Beta license allows me to use the app in the same country as my SIM. Since both are France this should work but for some reason it's failing. Any suggestions as to how to troubleshoot or fix this?
I really like the app and want to be able to use it here for navigation so I'd really like to get this fixed. I'm happy to pay for the upgrade to Drive+ if that is an alternative option.
Thanks in advance for your help.
Solved!
Go to Solution.

Hi HighSpeed,
Welcome to the Nokia Support Discussions!
Here Drive application uses a regional license which is based on the first SIM card (MCC) you have used to activate the service. In your case, you have used a US based SIM card and currently trying to use the service in France, correct? US and France has different MCCs, which explains the reason why you are getting that code. Even if you uninstall the app, the data is still stored on the phone. If you want to use the service in France, your only option is to reset the phone.
Hope this info helps.

Similar Messages

When mountain lion app nearly launch a hash mismatch error show up, How can i download it ?

When mountain lion app nearly launch a hash mismatch error show up, How can i download it help?

Did this work for anyone? I am having the same issue with my mbp. I have done everything else that I could this will be my last resort. Very frustrated with this whole issue. There should be no reason why this happened in the first place.

SAP NetWeaver 7.02 SP7 64 bit AS ABAP Trial Version: License mismatch

Hello together,
after installing the wrong license in the AS ABAP 7.02 SP7 64bit Trial system (Win 7 64bit), I am no longer able to activate a temp license or to install the correct license:
F:\usr\sap\NSP\SYS\exe\uc\NTAMD64>saplikey pf=F:\usr\sap\NSP\SYS\profile\NSP_DVEBMGS00_SERVER01 -get
Creating temporary shared memory file failed, rc = 5.,SHM_NAME=F:\sapdb\data\wr
k\sqldbcttrace.shm,DIRECTORY_NAME=F:\sapdb\data\wrk\
SAP License Key Administration - Copyright (C) 2003 - 2007 SAP AG
System ID. . . . : NSP
Hardware Key . . : N0806500786        (of this computer)
Installation No. : SAP-INTERN         (digitally signed license key)
                   INITIAL            (old license key)
System No. . . . : 000000000311558752 (digitally signed license key)
Error *** (old license key)
Release. . . . . : 720
Software products: NetWeaver_ADA
How do I solve this mismatch?
Thanks, Bernd

The soluion is:
In this case, you can only delete the license key directly in the database: first of all, examine the contents of the SAPLIKEY table. This table should contain exactly one record with a LIKEY field that begins with "0002LK", and possibly another record with a LIKEY field that begins with "0002LC". If you find one or both of these records, but no further records, you can delete them using database tools.
Regards,
Bernd

Error when launching Acrobat XI Pro

I get an error when launching Acrobat XI Pro:
Adobe License Utility has stopped working.
A problem has caused the program to stop working
correctly. Please close the program.

Hi toeneez,
Please try repairing Acrobat and check.
Try running the licensing fix patch available at : Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI
Regards,
Rave

Resource mismatch error in Acrobat Pro 6.0

Since I installed the newest version of Acrobat Reader, my Acrobat (version 9) my Acrobat Pro 6.0 no longer works!! Upon launch I get a "Resource Mismatch" error. There is no other explanation or information as to why the program won't run.

<< IMPORTANT INFORMATION! >>
This is an automated message.
The message you sent (attached below) requires confirmation
before it can be delivered. To confirm that you sent the
message below, just hit the "R"eply button and send this
message back (you don't need to edit anything). Once this is
done, no more confirmations will be necessary.
<< INFORMACION IMPORTANTE >>
Este es un mensaje automatico.
El mensaje que usted ha enviado (mostrado mas abajo)
necesita su confirmacion antes de ser entregado. Para
confirmar que usted ha enviado el mensaje, solo presione
el boton de "R"eply y envie éste mensaje (no es necesario
editar el mensaje). Una vez realizado esto, no se
necesitarán mas confirmaciones.
<< INFORMAÇÃO IMPORTANTE >>
Esta é uma mensagem automática
A mensagem que você enviou (em anexo) requer confirmação
antes de ser entregue. Para confirmar o envio basta
pressionar o botão de "Reply" e enviar esta mensagem de
volta (não é necessário editar). Uma vez que isto seja
feito, novas confirmações não serão necessárias.
<< WICHTIGE INFORMATION >>
Dies ist eine automatisch generierte Antwort.
Ihre Mail (unten angehaengt) muss vor der Zustellung an mich
explizit bestaetigt werden. Um dies zu tun, beantworten Sie
einfach diese Mail mit der "Antworten" oder "Reply"-Funktion
Ihres Mailprogramms. Es sind keine Aenderungen am Text
noetig. Dies ist die einzige Bestaetigung die Sie je an mich
senden muessen; Ihre weiteren Nachrichten werden automatisch
akzeptiert. Diese Massnahme dient der Bekaempfung von Spam.
<< INFORMATION IMPORTANTE >>
Ceci est un message automatique.
Le message que vous avez envoye (dessous) demande
confirmation avant qu'il puisse etre envoye Pour confirmer
que vous avez bien envoye le message ci-dessous, simplement
appuyez sur la touche "R"eply, et renvoyez ce message (Vous
n'avez pas besoin d'editer quoique ce soit). Une fois que
ceci est fait, vous n'avez pas besoin d'autre confirmations.
<< INFORMAZIONE IMPORTATE! >>
Questo è un messaggio automatico.
Il messaggio che hai spedito (allegato sotto) richiede una
conferma prima che sia consegnato. Per confermare che sei
tu che hai spedito il messaggio, basta cliccare il tasto
"R"eply e rispedirlo nuovamente (non hai bisogno di scrivere
nessuna altra informazione aggiuntiva). Fatto questo,
nessuna altra conferma è richiesta.
--- Original Message Follows ---
Date: Fri, 18 Mar 2011 18:35:45 -0600
From: MichaelKazlow <[email protected]>
To: anders ekstromer <[email protected]>
Subject: Resource mismatch error in Acrobat Pro 6.0

Type Mismatch error while saving a BPC Report using eTools

Hi,
Iam getting a 'type mismatch' error when trying to save a BPC Excel workbook using eTools>Save Dynamic Template >Company>eExcel. I am saving it as an .xlsx file.
Can anyone please help out and let me know why I am getting this error.
Thanks
Arvind

Hi,
You need to save the file as .xls extension.

Type Mismatch error while calling a Java Function from Visual Basic 6.0...

Hi,
I'm having a problem in calling the Java Applet's Function from Visual Basic. First, I'm getting the handle of the Java Applet and components of it using "Document.Applets(n)" which is a HTML function. I'm calling this function from Visual Basic. My code is something like this...
' // Web1 is IE Browser in my Form.
Dim Ap,Comp
Dim Bol as Boolean
Bol = true
Ap = Web1.Document.Applets(0).getWindow() ' \\ Gets the Parent Window.
Ap.setTitle("My Java Applet") ' \\ Sets the Title of the window.
msgbox Ap.getVisibility() ' \\ This will return a Java boolean ( true or false )
Ap.setVisibility(Bol) ' \\ Function Syntax is : void setVisibility(boolean b)
Here in my code , i'm able to call any function that which accepts Integer or String but not boolean. So, i m facing problem with Ap.setVisibility() function. It gives me a "Type mismatch error" while executing it. Can you please tell me a way to do this from Visual Basic !
I'm using Visual Basic 6.0, Windows 2000 , J2SDK 1.4.2_05.
Please help me Friends.
Thanks and Regards,
Srinivas Annam.

Hi
I am not sure about this solution. try this
Declare a variable as variant and store the boolean value in that variable and then use in ur method.
Post ur reply in this forum.
bye for now
sat

I get this error upon launching PS5: "could not open a scratch file because the file is locked .."

I get this error upon launching PS5: "could not open a scratch file because the file is locked or ou do not have the necessary access privileges. Use the 'properties' command in the Windows Explorer to unlock the file". The applicaiton will not launch.
Supporting information - I recently changed the scratch disk from C drive to D drive (the back up/restore drive). The application wont launch so I cant change it back to the C drive.
Questions:
- How to I fix this .. from windows explorer how do I find "the file" that the error message refers to?
- Other ways to fix this?
Thanks Steve

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

Characterset mismatch error while export

Hi,
I am getting characterset mismatch error while exporting a schema.
select * from nls_database_parameters where parameter in('NLS_LANGUAGE','NLS_TERRITORY','NLS_CHARACTERSET')
PARAMETER
VALUE
NLS_LANGUAGE
AMERICAN
NLS_TERRITORY
AMERICA
NLS_CHARACTERSET
AL32UTF8
i have set nls_lang on OS level
NLS_LANG = AMERICAN_AMERICA.AL32UTF8
C:\oracle\ora92\bin>
C:\oracle\ora92\bin>
C:\oracle\ora92\bin>exp hrtemp_v6/hrtemp_v6@testdb file=c:\hrtemp_v6 statistics=
none
Export: Release 9.2.0.1.0 - Production on Mon May 14 11:55:58 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user HRTEMP_V6
. exporting PUBLIC type synonyms
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
EXP-00000: Export terminated unsuccessfully
please suggest , whats wrong here
thanks & regards

i have set nls_lang on OS level
NLS_LANG = AMERICAN_AMERICA.AL32UTF8How and where?
C:\oracle\ora92\bin>At this command prompt, what do you get back from "set nls"
You can use
c:\> set nls_lang=.al32utf8
...right before you issue exp command.

Please help me. I am getting an error while launching an web start applic

I am getting the following error while launching an java web start apllication.
Exception in thread"javaWSApplicationMains"java.lan.NoClassDefFound:SimpleSerial.
The jnlp file i have used is as follows:
<?xml version="1.0" encoding="utf-8"?>

<jnlp spec="1.0+" codebase="http://zycomm:8080" href="Aeon.jnlp">
<information>
<title>Aeon HHBM Manager</title>
<vendor>ME</vendor>
<description>Aeon HHBM Manager</description>
</information>
<offline_allowed/>
<resources>
<j2se version="1.4+"/>
<jar href="aeon.jar"/>
</resources>
<application-desc main-class="Aeon_PManager" />
<component-desc/>
</jnlp>
The java code is as follows:
SimpleSerial.java
import java.io.*;
//import java.lang.*;
//import java.lang.ClassNotFoundException;
Interface class for SimpleSerial.
If you don't know what an interface is, don't worry. An interface defines the functions
that can be called by implementors of this class. Currently there are two implementors,
SimpleSerialNative, and SimpleSerialJava. There might be more in the future.
SimpleSerialNative requires the file "SimpleSerialNative.dll" to be in the same folder as your Java
project file. It's that simple.
SimpleSerialJava requires the correct installation of Sun's Javacomm communication package. It's much
more powerful, but it can be tricky for the newcomer to configure, and use.
If you have problems with one, why don't you try the other.
A VERY SIMPLE IMPLEMENTATION:
public static void main(String args[]) {
SimpleSerial ss; // delcare the SimpleSerial object
ss = new SimpleSerialNative(2); // The argument is the commport number. There is no Comm0.
ss.writeByte((byte)'a'); // write a byte to the serial port
// Give the PIC chip time to digest the byte to make sure it's ready for the next byte.
try { Thread.sleep(1); } catch (InterruptedException e) {}
ss.writeByte((byte)'!'); // write another byte to the serial port
String inputString = ss.readString(); // read any string from the serial port
System.out.println("I read the string: " + inputString);
A few important things to note:
1. When you write data to the serial port, it just writes the data, whether or not the PIC chip is
ready to receive data. There's no handshaking or signaling. If you send data and the PIC chip
isn't ready for it, it will be ignored. Some PIC chips have a hardware UART which will buffer a
few bytes of data for later retrieval. But this isn't a cure-all. If the buffer fills up, it
creates an error condition which prevents further data from being read. You need to include
custom PIC code to reset the error flag.
2 In contrast to the PIC chip, the computer has a rather large hardware buffer. If the PIC chip
sends serial data to your computer when you're not around to read it, it gets stored.
3. If you make a call to readByte(), and there's no data to be read, readByte() waits until there
is data. If you want to know how much data (if any) is available, make a call to available().
4. Conversely, if you make a call to readBytes() or readString() and there's no data to be read,
readBytes() returns a byte array of zero length, and readString() returns and empty string.
5. If you want to use Sun's JavaComm package instead of this code, subsitute your calls to
new SimpleSerialNative(2);
with
new SImpleSerialJava(2);
public interface SimpleSerial {
// These are copied right out of WINBASE.H
// Most applications should be fine with the defaults.
public static final int NOPARITY = 0;
public static final int ODDPARITY = 1;
public static final int EVENPARITY = 2;
public static final int MARKPARITY = 3;
public static final int SPACEPARITY = 4;
public static final int ONESTOPBIT = 0;
public static final int ONE5STOPBITS = 1;
public static final int TWOSTOPBITS = 2;
Returns the number of bytes available at the time of this call.
It's possible there are more bytes by the time readByte() or
readBytes() is executed. But there will never be fewer.
public int available();
public void waitForData(int n);
public boolean writeString(String string);
returns TRUE if port is fully operationsal
returns FALSE if there is a problem with the port
public boolean isValid();
Be sure to close your serial port when done. Note that port is
automatically closed on exit if you don't close it yourself
public void close();
Reads a single byte from the input stream.
Return value will be from -128 to 127 (inclusive)
If no data at serial port, waits in routine for data to arrive.
Use available() to check how much data is available.
If error, returns 256.
public int readByte();
Reads all the bytes in the serial port.
If no bytes availble, returns array with zero elements.
Never waits for data to arrive
public byte[] readBytes();
Reads bytes from serial port and converts to a text string.
DO NOT use this routine to read data. Char->Byte converstion
does strange things when the values are negative. For non-
text values, use readBytes() above
public String readString();
Writes a single byte to the serial port.
This writes the data, whether the PIC is ready to receive or not.
Be careful not to overwhelm the PIC chip with data.
On pics without a hardware UART, the data will be ignored.
On pics with a hardware UART, overflowing will loose data AND require
the UART on the PIC to be reset. You can reset the UART in PIC code,
or manually turn the PIC off and then on.
NOTE: A byte has a value in the range of -128 to 127
NOTE: If you want to write a character, you need to cast it to a byte,
for example: simpleSerial.writeByte((char)'b');
public boolean writeByte(byte val);
For more advanced use. Gets the input stream associated with serial port
public InputStream getInputStream();
For more advanced use. Gets the output stream associated with serial port
public OutputStream getOutputStream();
Please help I am the beginner in web start.Please

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

Getting Type Mismatch Error while passing Array of Interfaces from C#(VSTO) to VBA through IDispatch interface

Hi,
I am facing issues like Type Mismatch while passing Array of interfaces from .NET to VBA and vice versa using VSTO technology.
My requirement is that ComInterfaceType needs to be InterfaceIsIDispatch.
My Interface definition is somewhat like this
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("AAF48FBC-52B6-4179-A8D2-944D7FBF264E")]
    public interface IInterface1
        [DispId(0)]
        IInterface2[] GetObj();
        [DispId(1)]
        void SetObj(ref IInterface2[] obj);
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("CDC06E1D-FE8C-477E-97F1-604B73EF868F")]
    public interface IInterface2
IF i am passing array of above interface (created in C#.Net) to VBA using GetObj API,i am getting type mismatch error in VBA while assigning the value to variable in VBA.Even assigning to variant type variable gives TypeMismatch.
Also while passing Array of interfaces from VBA using SetObj API,excel crashes and sometimes it says method doesn't exists.
Kindly provide some assistance regarding the same.
Thanks

Hi,
I am facing issues like Type Mismatch while passing Array of interfaces from .NET to VBA and vice versa using VSTO technology.
My requirement is that ComInterfaceType needs to be InterfaceIsIDispatch.
My Interface definition is somewhat like this
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("AAF48FBC-52B6-4179-A8D2-944D7FBF264E")]
    public interface IInterface1
        [DispId(0)]
        IInterface2[] GetObj();
        [DispId(1)]
        void SetObj(ref IInterface2[] obj);
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("CDC06E1D-FE8C-477E-97F1-604B73EF868F")]
    public interface IInterface2
IF i am passing array of above interface (created in C#.Net) to VBA using GetObj API,i am getting type mismatch error in VBA while assigning the value to variable in VBA.Even assigning to variant type variable gives TypeMismatch.
Also while passing Array of interfaces from VBA using SetObj API,excel crashes and sometimes it says method doesn't exists.
Kindly provide some assistance regarding the same.
Thanks

How to solve the "type mismatch" error in jCOM early binding program?

I got a "type mismatch" error jCOM early binding program.
I use the VB as the jCOM client to access the EJB deployed on WLS7. While using the
object parameter like "java.lang.Integer" in EJB method call, I got that error message
and my VB client had to be stopped?
The same situation, the VB program work perfect when using the "int" as the parameter.
And I try to instance the "myTLB.JavaLangInteger" in my VB program, but how ? The
"New", "CreateObject" and "GetObject" all failure, I don't know what to do next ???

Hi,
This problem Could happen when you referesh quality or test system.
Your delta setup for the related master and transaction data needs to be reinit.
What happens is when you init. the delta and subsequent delta is all maintained in your source system
please check Notes 852443,424848,834229
Hope this helps
Thanks
Teja
Message was edited by:
Teja badugu

RowSet Column Type Mismatch Error

Hi,
I am using SOA 11g,
JDeveloper 11.1.1.3.0
BPEL, SOA 11g, DB2 Stored procedure,
In a BPEL service I am getting this error while invoking a DB2 Stored procedure with Strong XSD.
while running I am getting this error message. This error message while invoking DB2 stored procedure, both XSD are identical. Input to service & input to DB adapter.
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'dba' failed due to: RowSet Column Type Mismatch Error. The SQL type in the XSD (CHARACTER) does not match the SQL type in the RowSet (VARCHAR) for column LONGITEM of parameter RowSet. This procedure returns a RowSet which could in theory return any arbitrary result. However you chose at design time to generate a single strongly typed XSD describing this result set in all cases, based on a test execution of the stored procedure. This makes later XML transforms easier. You may have also edited the XSD directly. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
-CD

Hi CD,
maybe if your strong XSD contains db:type="CHAR", you could try to change it to "VARCHAR" instead.
HTH,
Steve

Type Mismatch error

Hi,
Iam getting a 'type mismatch' error when trying to save a BPC Excel Ecel workbook using eTools>Save Dynamic Template >Company>eExcel. I am saving it as an .xlsx file.
Can anyone please help out and let me know why I am getting this error.
Thanks
Arvind

Hi Arvind,
You need to save the template as .xls file. This will work properly.

"Type mismatch" error in IE7/8 when using custom Actions Menu Image

Hi all,
in APEX 4.2: when using a custom image in the "Actions Menu Image" attribute in an interactive report, I get a "Type mismatch" error in IE7/8 when refreshing the report through PPR (filtering, sorting, paginating etc.). When I leave the "Actions Menu Image" field empty, everything works fine. The error doesn't seem to happen in IE9 (unless using compatibility mode), or in any non-IE browser.
I've been able to reproduce the issue in an application on apex.oracle.com:
http://apex.oracle.com/pls/apex/f?p=69347:1
Some debugging seems to indicate that the following line in widget.interactiveReport.js is the culprit:
lTemp.parentNode.replaceChild($x('apexir_WORKSHEET'), lTemp);Does anybody know if this is a known issue, or if there is some workaround?
Thanks,
Tobias

Hi,
Great solution Paul! It cost me a while before I found out the Action Menu Image was causing my interactive reports to stop refreshing in IE10 and not other browsers. Your solution works great, I've implemented it with a few minor adjustments:
- Put the css in report template (for some reason it didn't work in our own application stylesheet)
- replace 'url("/c/action_dropdown.gif")' with 'url("&APP_IMAGE_PREFIX./<path_to_image>")'
- place one dynamic action on page 0: after refresh of '#apexir_DATA_PANEL' , set event scope to "Dynamic".
- Let the Dynamic action also fire on page load.
- To make sure the dynamic action only works for pages with an interactive report add condition of type 'Exists' with expression:
select 1
from   dual
where :APP_PAGE_ID in (select page_id
                                        from   apex_application_page_ir
                                        where application_id = :APP_ID
Best regards,
Vincent Deelen

LICENSE MISMATCH error on launch

Similar Messages

Maybe you are looking for