License Part number

Hi,
I am looking for the cucm license part number for BE7K. Please advice me.

Hi Aman,
This is not the one. When we are ordering the license for be6k, the license part number will be R-CBE6K-K9. Then we can select all the required licenses under this product.
The same way there is aproduct code for BE7K. I am looking for that.

Similar Messages

  • In reviewing the Cisco Licensing Guide, there is a license part number for MPLS on the Nexus 7010. Part Number is N7K-MPLS1K9.

    In reviewing the Cisco Licensing Guide, there is a license part number for MPLS on the Nexus 7010.  Part Number is N7K-MPLS1K9.  Is there a corresponding part number for the Nexus 7710?

    For the benefit of others, here is what we found. The N7K was hitting the bug CSCtg95381.
    Symptom
    Nexus 7000 may punt traffic to CPU; so that the traffic may experience random delay or drop.
    Further looking, ARP is learned and FIB adjacency is in FIB adjacency table.
    Conditions
    The problem is caused by race condition. Some hosts have not responded to the ARP refresh sent by
    N7k which in turn  trigger to delete  ARP entry  due to expiry. As a result   the route delete notification is
    sent   to URIB from the process. However there is still traffic coming to   given IP address as a result  the next packet that hit glean resulting   in triggering ARP and  hope ARP is learnt from the host this time.
    Workaround
    (s):
    Clear ip route < host>.
    Not  totally explains why it was working for certain client-server  combination but yet the workaround is holding well for end-points when  implemented.
    There  would be no host route for the destination server in the adjacency  manager on N7K-01. The only thing thats there is the subnet route  pointing towards the vlan gateway address. Implementing the work-around,  a new /32 route can now be seen in the adjacency manager for the  server.
    The bug is fixed in releases starting 5.1(5). Planning to upgrade to 5.2(3a).
    Regards, Rashid.

  • Part number to upgrade ACS 1113 from 4.2 to 5.1

    I would like to upgrade my ACS server SE 1113 from 4.2 to 5.x but I cannot seem to find a part number.  Does anyone know what the license part number may be?
    Thanks,
    Gary

    Gary,
    See here:
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps5698/ps6767/ps9911/product_bulletin_c25-569135.html
    HTH,
    Faisal
    If you find this post helpful, please rate so others can find the answer easily

  • Looking for part number

     CISCO Firewall with following specs:
    Firewall with filtering, anti-virus and anti-spam . I need license for the minimum number of users .
    when i searched i found ASA5512 but there is no any information about number of user .

    The features you mention used to be in the content security modules and licenses on the old 5500 series.
    Cisco has moved to a different model and set of offerings with the Next Generation Firewall features of the 5500-X series. Web filtering is provided by the Web Security Essentials (WSE) feature. It is licensed to run on the CX module and usually sold with the Application Visibility and Control (AVC) feature set. They are licensed annually or in multi-year subscriptions and not by number of users.
    Please see the subscription license part number in the bottom half of Table 4 here.
    Cisco has mostly moved the AV and anti-spam features off the firewall product line. You can get Cloud Web Security (with or without Advanced Malware Protection) which integrates via a connector with an ASA. It is described here. Anti-spam would be a feature of the Cisco Ironport Email Security Appliance  (ESA).

  • What is the part number for License 8.6

    I have call manager 8.6 and I need to add new license , can anybody tell me what is the part number?
    dose it depend on the ip phone model ?

    If you are a partner you can refer to the ordering guide:
    http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/uc_og-ucl_cucm_mcs_cer_CUxAC_cime_sme-edcs840769.pdf
    CUCM licenses are user based, so which license are you looking at CUWL, UCL?
    This should help:
    http://www.cisco.com/c/en/us/products/unified-communications/unified-communications-licensing/index.html

  • AS5400 HPX feature license upgrade part number

    Dear Support,
    I've been search round the cisco site without sucess!
    I've been asked to ensure all devices support SSH access for our new security policy. We currently have many AS5400 HPX running with the 12.3T IP Plus license, and believe I need to upgrade these to the 12.4T IP PLUS IPSEC 3DES image (feature navigator shows ssh server is in this feature set).
    Could someone advise me the part number I need for the upgrade.
    Your assistance is appreciated.
    I always rate helpful posts.
    Regards, Adrian.
    PS I am aware these are EoS, and we should be eventually going to the XM platform.

    The things is that part codes are complicated to find for users, especially when products are already EoS, as one has to track the original order to match an upgrade code from the original list price.
    Because of this I suggest you contact the cisco office for them to find the exact codes. In certain cases they can then waive the requirements in writing to satisfy all licensing requirements.

  • Can I transfer my CS4 license to my new laptop with a part number but no CD.  I can not find the CD.

    Can I transfer my CS4 license to my new laptop with a part number but no CD.  I can not find the CD.

    Download CS4 products
    Mylenium

  • Which part number for CSC-SSM with Plus license?

    Dear All,
    Which part number for CSC-SSM with Plus License? i saw the part number for standard license.
    could you let me know?
    Best regards,

    Hi,
    The part number is the following:
    ASA-CSCX-YP-ZY
    where X is your CSC model, Y is the number of seats of the license and Z is the number of years.
    For instance, if you need a 2 year plus license for a CSC10 with 250 seats, the part number would be ASA-CSC10-250P-2Y
    Regards,
    Nicolas

  • What is the part number for labview fds cd media only

    what is the part number for labview fds cd media only - i'll purchase on line but can't find the part.

    Randy's definately right - you should talk to your local rep. before makig any purchases, but here's some numbers to start you off:
    LabVIEW FDS for Windows2000/NT/Me/9x
    776670-03 English
    776670N-0313 German
    776670N-0314 French
    LabVIEW FDS for Power Mac OS
    776690-03 English
    LabVIEW FDS for Sun Solaris
    776680-031 English
    LabVIEW FDS for HP-UX
    777010-031 English
    LabVIEW FDS for Linux
    777756-03 English
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Difference between part number WS-CAC-6000W & WS-CAC-6000W=

    Hi,
    I would appreciate if someone can advise the following:
    1. What is the difference between the part number, e.g. WS-CAC-6000W & WS-CAC-6000W=? Any Cisco links that explains?
    2. Which IOS features requires us to purchase the license, which IOS comes with the switch itself? Any Cisco links that explains?
    3. Any Cisco links / verification tools that help us to verify that the modules, supervisor engine, power supply, etc that we have selected works fine with our requirements?
    Thank you.
    Christina

    Hi,
    1) the addition of the "=" just means "spare" - the parts are identical.
    2) You don't say which switch, but as (1) is a 6500 power supply I guess that's what you've got ;-) If you talking about IOS then what you're really talking about is the supervisor module and which one you need is totally depenent on your requirements, i.e. do you need to support MPLS? PoE? WAN? etc.. So, I'd start here:
    http://www.cisco.com/en/US/products/hw/switches/ps708/index.html
    and read /all/ the information in the "product literature" section. It'll take a while, but you'll have a hugely increased understanding of features and options available - people here will be happy to answer more specific questions.
    3) There is a tool for this here (login needed):
    https://tools.cisco.com/qtc/config/html/configureHomeGuest.html
    HTH - plz rate if useful
    Andrew.

  • Need help with licensing part numbers

    Ok, here's the scenario:
    I have abandoned my original plan to use an IAD2431 to run CUCME and gone with a 2901 instead, but after reading & searching and reading for hours, I can not make heads or tails of this licensing scheme. Can anyone please just review my environment description below and tell me what license part numbers to buy? Maybe I'm just an idiot, but I've never seen anything this ridiculously difficult to figure out.
    (1) already installed 2901, with (1) VIC2-2FXO and (2)EHWIC-4ESG installed.
    This router will do nothing at present other than run CUCME. I have obtained a 60 day UC evaluation license from Cisco, but I will need to replace this with a permanent license.
    (8) 7975G's (spares - no license included)
    (1) 7925G (spare - no license included)
    I currently have two POTS lines coming into the residence and one external SIP trunk (dialin/dialout). I need for all three of these to be accessible to ephones on my system.
    Router is running IOS 15.4(3)M and CME 10. Phones are all running latest (as of today) SCCP firmware.
    So, in this scenario, what license part numbers do I need to purchase to make everything work?

    Hi Darren,
    U need to have feature license say FL-CME-SRST-100= [qty. depends] along with IP phone user license  SW-CCME-UL-7925= [Depands on number of users]
    Additionally, u need to have CUBE licenses for SIP Trunking[ FL-CUBEE-25]
    U can also refer ordering guide for more details
    http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/vcallcon/ps4625/cme_ordering_guide.pdf
    regds,
    aman

  • Software Part Number..

    Hi everyone,
    can you help me generate the part number for this software? i know it should be a software/license, please what is the product/part number?
    The description is given below:
    CENTRAL CALL CONTROL SOFTWARE
    The Central Call Control Software extends enterprise telephony
    features and function to packet telephony network devices, VOIP
    gateways and multimedia applications. It shall have the necessary
    License(s) needed for the operation and maintenance of the software.
    It shall have the following functions (but not limited to)
    - Call Processing; Signalling and Device Control; Dial Plan
    Administration; Phone Feature Administration; Directory Services;
    Programming Interface to External Application; Backup and Restore
    Trools; Cisco Unified Communicatioins Manager 7.0 or later Version
    Thanks
    samson

    You can download the files at:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66973
    The part numbers are different from yours, but give it a try.
    If that doesn't work. You can use imgburn at http://www.imgburn.com/ to create a CD image on your hard disk, then use
    Virtual Clone Drive http://www.slysoft.com/en/virtual-clonedrive.html to load the image. Your computer will treat as a CD drive and lets you run the software on the virtual drive.

  • How can i find marketing part number?

    how can i find marketing part number?

    The marketing part number for the single-user package is MA790Z/A, for the family pack it is MA791Z/A. The only way I've ever been able to find the marketing part number online is to add the item to my cart then edit the cart where it will then show the number & I can remove the item. This is how I just found the single-user number for you. The family pack number is from my Apple Store invoice.I never even think to use the registration web page for Apple software, I just assume when I put in the serial number & it says my registration was sent to Apple, that's it. And I've been using iWork '08 on the family pack license since I got it around August 11 without any further registration.
    <Link Edited by Host>

  • What does full name on Part number?

    Dear all,
    Does any one know the full name of part number as below?
    1- WS-C3650-48FS
    what is full name WS, FS?
    2- WS-C3650-48TQ
    what is full name TQ?
    3-  WS-C2960X-48FPD-L
    what is full name X , FPD-L
    do you have link to show on this ?
    Best Regards,
    Rechard

    There is not a publicly published complete and explicit definition of the letters Cisco uses in their product nomenclature. the best one can do is look at either the product data sheet or Cisco Commerce Workspace (partner / reseller only) and see what the product description is.
    For instance, WS-C3650FS (-E or -L) is "Cisco Catalyst 3650 48 Port Full PoE 4x1G Uplink IP Services" (with Enhanced or Lanbase license), WS-C3650-48TQ is "Cisco Catalyst 3650 48 Port Data 4x10G Uplink IP Services" and WS-C2960X-48FPD-L is "Catalyst 2960-X 48 GigE PoE 740W, 2 x 10G SFP+, LAN Base".
    WS generally is a prefix on part numbers for all Wire Speed switch products. (Though that breaks down a bit on some of the smaller Catalyst models.) I've also seen it refer to "Workgroup Switch" class products.
    FS means is is a switch with fiber user ports.
    X distinguishes the newer 2960 models from the original 2960 series.
    FPD-L mean it has Full PoE+ and comes with Lanbase software feature license.
    Generally the letters at the end refer to the uplink type and license level.
    Also please see this earlier discussion:
    https://supportforums.cisco.com/thread/2135341

  • What is the correct part number for dvi to vga adapter for macbook pro model A1260

    Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
    My adapter has reached the end of useful life.
    Thanks!

    You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
    The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
    The DVI connector  connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
    http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
    You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

Maybe you are looking for