License problem with Billings

I have been running 'Billings' in demo mode for a week. Tonight I decided to purchase it on the App Store. It downloaded OK and now appears in 'my purchases' but the App still runs in demo mode... any ideas? I am afraid of losing my data when the demo period ends soon. Still asking me for a licence key...
Thanks in advance for any assistance.

Thanks for your replies.
I didn't remove the demo because I didn't want to lose the data. I see your point, and makes sense in retrospect, but normally you run a demo program and then you simply 'purchase' to enable it to continue. That's what most people would do so obviously it's an issue.
I have contacted Marketcircle but they haven't been able to solve it for me. I have tried deleteing the program and dowloading again but the App Store has charged me twice for it.
I think the ultimate solution is to NEVER purchase critical apps from the App Store. I had to for Final Cut etc. but if there's an option - much better to purchase from the original supplier.
So at the moment, I have bought the package twice and it still doesn't work. Frankly it's not Marketcircle's fault; it's Apple's.

Similar Messages

Licensing problem with UCCX 7, agent not able to login at all

Hi there,
We have UCCX 7 server and CUCM 7.
Problem is that we the agents are not able to login and they are getting maximum license error although not all licenses are used.
We get the following errors when trying to login:
1. "Maximum number of licenses reached. Please notify your System Administrator".
2. When we click "Ok" for the error above, we get the following "A licensing error has occured. Please try again in five minutes. If the problem persists, please see your log file or System Administrator for details.".
I checked the licensing service and it is working fine.
The log for the licensing service is not indicating anything, it shows only the last time there was a failure in this service (this was 6 months ago after a restart). It was working fine until yesterday.
I tried to disable the "IPCC Extension" under the User Configuration in the CUCM and enable it again, but did not solve the problem and got the same error.
It is worth to mention that when I disabled the "IPCC Extension", before I enabled it again, I tried to login using CAD but I got the same exact error.
Any help will be really appreciate, thanks a lot.

Hi
Open a command prompt on your UCCX server (not client) and go to this directory:
C:\Program Files\Cisco\Desktop\bin
Then run:
showlicenseusage.exe
THis will show you the IP addresses that are currently consuming licenses. You can check these PCs to see if they are still logged in - if they are, that's your problem. If they aren't, then you may have a problem with the LRM service or something.
If it has logins listed that aren't really logged in, you might be able to restart the License and Resource Manager service from Control Center to resolve it temporarily.
Aaron
Please rate helpful posts..

Terminal Server Licensing Problems with GPO Security Group License Server

Hello,
I have two fresh installs of W2K12R2.
One is RD Session Host and the other one is the License Server. Everything is fine until I active the GPO Security Group License Server. After that the License Server gives no licenses
to die clients (we have User und Device CALs). TS Licensing Diagnostic’s shows no errors, the number of available licenses is displayed correctly, even the state of GPO Security Group License Server is correctly shown as "active" and die
Membership in the Group "RDS-Endpointserver" is "Yes". Eventlog shows no Errors. Log in on the session host is even possible, maybe because the RDS-Service is in evaluation time.
If the GPO Security Group License Server is disabled again, the server starts to serve licenses as expected.
I don’t know what I can do anymore, never had problems with exact the same setup under W2K8, but with W2K12 is the second time I notice this issue.
Thanks for your ideas,
Andreas

Hi Andreas,
Thank you for posting in Windows Server Forum.
Sorry to inform but there is no official document for server 2012 related to this event, you can go through below article for reference.
You cannot use a security group to add computer accounts to the Terminal Server Computers group. You must add each computer account explicitly. To verify whether an RD Session Host server is allowed to request RDS CALs from the Remote Desktop license server,
you can use the IsSecureAccessAllowed method of Win32_TSLicenseServer class. For more details about this method, click here.
1. License Diagnosis tool returns error "License server <computer name> cannot issue RDS CALs to the Remote Desktop Session Host Server because the 'License server security group' Group
Policy setting is enabled."
2.Control the Issuance of RDS CALs
Note: You should only enable this policy setting when the license server is a member of a domain. You can only add computer accounts for RD Session Host servers to the RDS Endpoint Servers group when the license server is a member of a domain.
Hope it helps!
Thanks,
Dharmesh

License problems with RAID systems

We are running a Labview vision 8.0 application on a XP SP2 system with RAID controller. The purpose is to be able to quickly recover from any harddisk problems. Do I have to reactivate the licenses when I swap the harddisks?

Hi,
As your RAID controller is just an external harddrive, the vision license is essentially running on the same machine so the same license can be used on different controllers.
There's no need to deactivate for each controller, as long as the license is being used on one system I don't believe you would be violating the licensing agreement.
Sarah
Applications Engineer | National Instruments | UK & Ireland

License problem with WCS and WLC

Hi All,
I have planned to implement three WLCs and one WCS to manage them.
AP count is as below :-
     WLC #1     -     10 AP
     WLC #2     -     10 AP
     WLC #3     -     20 AP
When WLC #1 is down that connected 10 APs should failover to the WLC #3.
So at normal scenarion, WLC #3 should need 30 AP license; to failover WLC#1 APs properly to the WLC #3
My problem is, Can I load total AP license (40 license) to WCS without installing them to individual WLCs ?
If it is possible i can cut off the additional 10 AP license, required to the HA and failover.
or if I use a WCS may i need to buy additional 40 license to WCS seperately from 40 WLC license ?
Thanks,
Charith

Yes, you required to have seperate licences for WLC & WCS.
You cannot add WLC licence to WCS & vice versa.
HTH
Rasika

License problems with Photoshop CC

I Signed Adobe Cluod and down load and install Lightromm & Photoshop. Photoshop stops without an error messagel. I tried to logout and login, following the adobe solution, but allways asked me once to activate the license. I recivied a message with the confirmation that I can work with photoshop but ask me again for the same and still Photoshop continues in the samen statusclose without error message. Please can you hel me.
Thanks in advance.

Thanks for the update Plux14 you are correct that working directly with our support team would be the best option if you are facing difficulties with your Membership or activation. For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to resolve the issue you have described.

Error 148:3 - I am having a licensing problem with my programs - error 148:3, what must I do?

What causes the 148:3 error? When I try to run any program in the suite, I get this error. Do I need to reinstall?

yes, this is a licensing error and most of them can only be fixed with a reinstall and proper serialization.
Mylenium

License problems with SAP-HANA developer at CloudShare

Hello everyone,
after connecting to the HANA Instance with HANA Studio (local and in the CloudShare instance) and adding the new System HDB the System is marked with a red 'X' displayinng the message "System locked; license invalid or expired".
Under Properties->License I have seen License Type invalid, Dates undefined.
After that I requested with the Hardware key a new license as described in http://scn.sap.com/docs/DOC-31036 I first deleted the old key and installed the new key. I got the pop-up message "License key has been installed successffully", but nothing changed. I restarted the Service and Studio and tried again. Again nothing changed.
What more can I do ??
Thanks, Gerd

Hello everyone,
after connecting to the HANA Instance with HANA Studio (local and in the CloudShare instance) and adding the new System HDB the System is marked with a red 'X' displayinng the message "System locked; license invalid or expired".
Under Properties->License I have seen License Type invalid, Dates undefined.
After that I requested with the Hardware key a new license as described in http://scn.sap.com/docs/DOC-31036 I first deleted the old key and installed the new key. I got the pop-up message "License key has been installed successffully", but nothing changed. I restarted the Service and Studio and tried again. Again nothing changed.
What more can I do ??
Thanks, Gerd

License Problem with Users

Hi,
Good Day!
Our client avail of license for 3 for their SAP Business One 2005 A. SP 01 PL 11. accourding to them they can only use 2 license for the users. I believed that 3x2 would be 6 licenses if Im not mistaken. But accoirding to them its only 2 users that can access the SAP.
Regards,
IAN

Dear Ian,
Previous reply is correct, as well you could verify at any moment how are the licenses being assigned to the users and the amount of remaining licenses available.
This could be verify in the license server in :
C:\Program Files\SAP\SAP Business One\ Server Tools\License > B1Upfold1.xml
You could open the file and verify users and assigned licenses.
Regards,
Juan Manuel Marrero
SAP Business One Forums Team

License problem with LR5

The serial number is supposeds to be at the bottom of the box. There is a long number/letter combo on the sticker but it is to long for the serial number boxes. It is supposed to be 24 digits, but it is much longer. How do I register?

Try http://helpx.adobe.com/x-productkb/global/find-serial-number.html#ihaveabox

License problems with Adobe reader

Hi, i suddenly got the message "before proceeding you must first lunch adobe acrbat and first accept the end user agreement" I did that on all the computers i have. I even purchased the pdf exporter, how to get that error fiyed, do i have to deinstall and than install again ?

if i understadn "launching " correctly it is installing, i did a complete new setup f my mac book air.... so i would guess it is launching, is it better to delete and launch it new

JCom License Problems on WLS 7.0

I've read through the various threads posted here on people hitting licensing problems
with JCom. Unfortunately, I seem to be having the same problem however the workarounds
suggested by others don't seem to be solving my problems.
I'm trying to get a bare bones example of a Java2Com application running. I'm
using WebLogic 7.0 SP1 on Win2k. Whenever I run my example, I get the following
error:
J-Integra 1.5.0 SB004 Copyright (C) 1999-2001 Intrinsyc Software Inc. http://www.intrinsyc.com/j-integra/
java.lang.RuntimeException: No valid licensing information found.
java.lang.ExceptionInInitializerError: java.lang.RuntimeException: No valid licensing
information found.
Can someone please give me a step-by-step breakdown as to what I'm supposed to
do to get JCom working?
Thanks,
Brian.

I've read through the various threads posted here on people hitting licensing problems
with JCom. Unfortunately, I seem to be having the same problem however the workarounds
suggested by others don't seem to be solving my problems.
I'm trying to get a bare bones example of a Java2Com application running. I'm
using WebLogic 7.0 SP1 on Win2k. Whenever I run my example, I get the following
error:
J-Integra 1.5.0 SB004 Copyright (C) 1999-2001 Intrinsyc Software Inc. http://www.intrinsyc.com/j-integra/
java.lang.RuntimeException: No valid licensing information found.
java.lang.ExceptionInInitializerError: java.lang.RuntimeException: No valid licensing
information found.
Can someone please give me a step-by-step breakdown as to what I'm supposed to
do to get JCom working?
Thanks,
Brian.

Licensing issues with Trial version?

I'm trying to make changes to a pre-existing Flash file that
I got from someone else. I only have an educational version of
Flash, and I know there are licensing problems with using that for
commercial use...but what about if I downloaded the trial version
and made changes to the file with that?

1)
unable to populate database values at speak List in flash Builder4.6 The fallowing code is used
<fx:Script>
<![CDATA[
   import mx.collections.ArrayCollection;
   private function getIteamCategory():void {
   avar sqlConnection:SQLConnection = new SQLConnection();
var resultSet:SQLResult = null ;
var dataList:ArrayCollection = new ArrayCollection();
sqlConnection.open(File.applicationStorageDirectory.resolvePath("IDatabase.db"));
var stmt:SQLStatement = new SQLStatement();
stmt.sqlConnection = sqlConnection;
   stmt.text="SELECT item_category FROM Menu_Table where item_id between 1 and 99";
stmt.execute();
data_list.dataProvider=new ArrayCollection(stmt.getResult().data);
   sqlConnection.close();
return dataList;
        protected function datalist _creationCompleteHandler (event:FlexEvent):void //executed when the List completes loading
            getIteamCategory ();
]]>
<b/fx:Script>
<s:List id="datalist" x="10" y="10" left="0" right="0" top="0" bottom="0" width="1004"
        height="500"
        creationComplete="datalist _creationCompleteHandler(event)" enabled="true">
    <s:itemRenderer>
        <fx:Component>
            <s:MobileItemRenderer label = "{data. item_category }"/> // The Application is a mobile app
        </fx:Component>
    </s:itemRenderer>
</s:List>
Please suggest, I also included mx.swc file in the build path. Also seeing following several error message, pasting two of them
1120: Access of undefined property ContainerBorderSkin.
1172: Definition mx.skins.spark:ButtonSkin could not be found.          NewIndianCurryHous
Thanks in advance.

Problem with JDBC Connection for HDB hanadb 02

Hi folks,
Ok I have an instance based on the 7.4 SP5 HANA CAL solution.
But when I suspend and restart the R3 system doesn't start again.
I've followed the instructions in the user guide and can access the backend instance and see that for HDB GetProcessList everything is GREEN, running
while for A4H GetProcessList everything is GREY, stopped
When I try to start the A4H instance I get
Checking HDB database
Database is not available via R3trans
Database must be started first
The messages I found on SCN suggested this might be a license problem with the HANA database, so I tried to follow the install license instructions for the HANA database via the HANA studio, but when I try to open the HDB(SYSTEM) > Properties > Licence, I then get the messages
Error while reading the licence information from system HDB hanadb 02
Reason:
Cannot retrieve JDBC Connection for HDB hanadb 02
So what do I try now?
Any suggestions?
Rgds,
Jocelyn

Thanks Ivanka! That sorted it.
For the benefit of others...the error message was found in the server log files
/var/log/applianceagent.log
/var/log/appliancedeploy.log

Problems with Adobe ID/licensing the software Creative Cloud

Hello,
I have problem with licensing the software of Creative Cloud. All programs installed on my computer and working fine. But the software keeps asking (around 1/2 days),
for licensing the software. For example: when I tried to open Photoshop this day I get the warning sign/pop-up about 'licensing the product', when I click that I get another pop-up about finishing my Adobe ID. After I click that, it goes to internet --> Adobe account where I have to sign in (mail + password). I do that and then the site remains loading the page. Once it did enter into my ADobe ID, and everything was fine, Creative Cloud was mentioned and paid etc in my account. So I hope u can help me further, Thanks in advance! grt Marcel

Hi Marcel,
Please try deleting these folders from these locations and try launching any apps. It will ask you to license the software so enter your credentials and that should fix the issue.
Windows:
Delete these folders
SLStore from C:\ProgramData\Adobe
SLCache from C:\Program Files (x86)\Common Files\Adobe
OOBE from C:\Users\(Your Username)\AppData\Local\Adobe
Mac:
Delete SLStore and SLCache from /Library/Application Support/Adobe
Delete OOBE from ~/Library/Application Support/Adobe
Please let us know if it helps.
Regards,
Abhijit

License problem with Billings

Similar Messages

Maybe you are looking for