License Rehosting for CUCM 8.5 to 9.1.2 Virtualization and Upgrade

No license rehosting is required for a jump upgrade from 6 or 7 to 9.1.2.
If you follow the same procedure for a 8.5 or 8.6 virtualization and upgrade - you virtualize your 8.5 or 8.6 software in a lab and then upgrade to 9.1.2 and cutover - do you need to rehost your licenses for the interim virtual 8.5 or 8.6 cluster before upgrading? I've seen this error:
"Upgrades are prohibited during Licensing Grace Period" error trying to move off the "Software Location" page.

Hi,
The following link provides details of licenses usage by diff endpoints on version 9.x
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/uct/9_1_1/CUCM_BK_U0AE00F5_00_uct-admin-guide/CUCM_BK_U0AE00F5_00_uct-admin-guide_chapter_0100.html
HTH
Manish

Similar Messages

I have a license for photoshop 10. Can I download a copy and upgrade it?

I have a license for photoshop 10. Can I download a copy and upgrade it?

You can also buy CS6 for $700 instead of paying $10 a month the first year for Photoshop CC followed by $20 a month till Adobe changes the monthly charge for CC. If you stop paying your copy of CC will deactivate at some point. And PSD files saved with CC will all not be fully compatible with prior versions of Photoshop. Your new Actions and scripts may also not be compatible with older versions of Photoshop.

Licensing cost: For SAP R/3 4.7 to ECC 6.0 Upgrade

Hello,
I am planning to upgrade my SAP R/3 4.7 System to ECC 6.0.
I would like to know whether any additional Licensing cost is involved for this SAP software upgrade.
Also, I have three system landscape. Can you give me some pointers to SAP Upgrade Roadmap and Upgrade strategies for 3 system landscape upgrade?
Thanks.
-Nirav.

Hi Nirav,
the maintenace cost will be the same as before.
the maintanance cost include the possibility
that if you pay the maintenace fee regularly you can always get the
newest software releadse and the support packages and kernel for it.
please also look at this link.
http://service.sap.com/maintenance
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Need help retrieving the full license key for Photoshop 7.0 in order to re-install CS3 upgrade.

Reinstalling a licensed version of Photoshop CS3. It's an upgrade from 7.0 and it's asking for the full key for 7.0. Where can I find that?

If you did not register with Adobe, this may help.
How To Recover Your Lost Software Serial Numbers

UCL addon license for CUCM 10.x

Hi,
I'm creating BOQ for CUCM 10.x
I have 500 CUWL users
And I need to add some essential and enhanced users for analog and conference phones
I'm trying to add them using R-UCL-UCM-LIC-K9
But I got the following error which states you should select at least 1000 !!!
A combined total of LIC-UCM-10X-ENHP-B,LIC-CUCM-10X-ENH-B,LIC-CUCM-10X-BAS-B and/or LIC-CUCM-10X-ESS-B should be between 1000 and 10000. Please adjust the quantity.
Is there any other PN for addon license for UCL CUCM 10.x. I think it is the above one
Or it isn't possible to include UCL with CUWL !!
Also from where I could add SWSS service that UCSS will be EOS sale
Thanks

Hi
Just use the 'phones-users' tab in BAT.
... though I generally do phones/users separately.
Aaron

Does the Student License Allow for Two Installs?

Does the Student License Allow for Two Installs?
I have a desktop iMac and a Macbook notebook. I just purchased Adobe Web Standard CS3 (student license).
Can I install and activate the package on both of my computers? I know I could do this with a regular license, but I was unsure about the student license.
Thanks in advance.
Dave

HEEEEEELPPPPPPPPPP, PLEASE
I purchased adobe cs3 primium but i already had photoshop installed. I installed cs3 primium and now i keep getting the error that the licensing has stopped working can't use file cont IT or cust. support. I tried to download the clean file and it gives me the same error to open this file. i tried to uninstall with control panel programs and uninstall and it gives me the error uninstall not complete. I tried to repair with disc and uninstall with the disc and nothing is working. I have windows vista with 100g hd 500 mem duo core all the proper requirements but i can't get this to work.'
HELP anyone

Failed online license check for Add-ons

I'm using creative cloud on mac and am a fully paid member.
I have the latest updates to Photoshop & Extension manager.
In Photoshop CC 2014 when I browse to extensions to try and run 'AnimDessin2' it is not visible (the only add on visible is Kuler) despite installing it from the Adobe add on site. Similarly if I try to install it manually by downloading the add on and running it from extension manager CC I get a message saying 'Failed online license check for Add-ons'.
I've tried signing in and out of creative cloud but have no luck in using this or any other extension from the add on site.
Please help.

Please follow How to install the plugins in Photoshop CC 2014 - Powered by Kayako eSupport Help Desk Software to install it.

What licenses do I need for CUCM and CME

Hi Experts,
I am a newbie to Cisco IP telephony and request your guidance.
My boss has asked me to order some 7942 phones for a CUCM based site and some 7942 phones for a CME based site.
For CUCM 9, I understand that we need an enhanced user licenses on CUCM side.
For the IP phone, I see 2 part numbers and am confused.
CP-7942G - Cisco Unified IP Phone 7942G
CP-7942G-CH1 - Cisco Unified IP Phone 7942G, for Channels, with one station user license
What is the station user license mentioned in the part number CP-7942G-CH1 ? Is it the same as the enhanced user licenses? Assuming i am ordering enhanced user licenses, what should I order CP-7942G or CP-7942G-CH1?
I also see a part number SW-CCM-UL-7942= ? What is this part? is it needed?
And what do I need for CME?
Is FL-CME-SRST-10 enough for the CME?
What is the part number for the phones? Is it CP-7942G or CP-7942G-CCME?
I also see another part number "SW-CCME-UL-7942="? What is it? And is it really needed?
I heard that Cisco simplified Licensing from version 9. At least it doesn't look simple to me :(
Can you please help me, Experts?
Thanks,
Pete

Hi without knowing your business goals, current network, etc here is some feedback.
Depending on your design, if the sites are connected via a reliable WAN you could run the branch site as SRST and not CME, this way you get a rich feature set of the centralised call manager and simplify licenses, etc.
Anyway, you need to size your CUCME (or SRST) correctly as each Cisco router hardware platform has a maximum supported handsets. If you have a SIP provider new purchased ISRs now come with 10 CUBE licenses other wise you will need something else such as a VIC for dial tone.
For instance the following is a router that comes with 25 CME
C2901-CME-SRST/K9
2901 Voice Bundle w/PVDM3-16,FL-CME-SRST-25,UC Lic,FL-CUBE10
You can add CP-7942G-CCME which is the physical phone and license for CME
Use CP-7942G= for the Call Manager Deployment as you will get UCL Enh or CUWL for the user side
If you have existing routers you will need to obtain upgrade licenses for voice/CME add DSPs if needed for conferencing, media termination, etc, CUBE or voice cards and you can add the phones.
Router handset capacities see Table 7
http://www.cisco.com/c/en/us/products/collateral/routers/2900-series-integrated-services-routers-isr/data_sheet_c78_553896.html
Hope this helps

Ask question for license for CUCM

Here are the concerns of client.
1.) First Email:
Those licenses delivered are for UCM before v9 and without UWL, we will need license for CUCMv9/v10 with UWL.
2.) Second Email:
Those license you delivered are not able to import to our call manager due to version restriction, that’s why we need your help to figure out with Cisco the possibility to use those license in CUCMv9.

Hi,
Cisco DLU have gone end of sale , so, customer needs to place order for UCL/CUWL licenses.
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/eos-eol-notice-c51-732309.html
If the customer has existing UCL/CUWL licenses which have been ordered for CUCM version 9 but using CUCM7/8 then, u can speak to licensing team to get licenses for CUCM 7/8.
Lastly, customer can also go for upgradation to CUCM9/10, provided they have valid ESW and UCSS contract[which is now SWSS] and then,use these ordered licenses.
regds,
aman

NX-OS Nexus 7018 License-id for Chassis or Supervisor

Hello,
For a single chassis supervisor, if we have license for VDC for 7018 Chassis, and we want to change the single supervisor with a spare one, can we install the backed-up license from the supervisor to the new supervisor. This is important because if the license is chassis based, we may be able to use the same license file for the spare supervisor, or if it is supervisor based we may need to contact TAC for a license rehosting procedure.
Also, if a grace period starts for a demo purpose, and after 120 Day grace period, is it possible to repeat the demo or poc with restarting the grace period, or a license needs to be bought?
Thanks in Advance,
Best Regards,
On the NX-OS Licensing guide it mentions about the serial number of the device (but we could not be sure if the device means chassis or supervisor)
Obtaining the License Key File
You can obtain new or updated license key files.
Procedure
Step 1
Obtain the serial number for your device by entering the show license host-id command. The host ID is also referred to as the device serial number.switch# show license host-idLicense hostid: VDH=FOX064317SQ
Tip
Use the entire ID that appears after the equal sign (=). In this example, the host ID is FOX064317SQ.

License is based on chassis serial number seen under show inventory. If you look at the License file name it is named with chassis serial number. If you replace the supervisor you do not need to transfer license by calling TAC but you can copy the license file to new supervisor bootflash and run install license command from bootflash to install license into new supervisor.

Cisco Unity Express (NME-CUE) Compatibility for CUCM 9.1.2

I unable to find latest Compatibility matrix for Cisco Unity Express (NME-CUE) module for integrating with CUCM 9.1.2
The URL: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.html is updated with CUCM 9.0 only.
Request to share Compatibility matrix or suggest Hardware and software for my below requirement.
I am running NME-CUE 7.0.6 on 2951 ISR2 with IOS version 15.2(4)M5 and integrated with CUCM 7.1.5 using SCCP.
I am upgrading my CUCM to 9.1.2 and need suggestion on upgrading the CUE.
Also need details on Licensing for approx 100 Mailbox and 25 Voice Ports (No need of IVR Ports).
Thanks,
Chandan

Hi Chandan,
CUE 8.6.6 and later are compatible with CUCM 9.1.x;
Support for Cisco Unified Communications Manager 9.1
Cisco Unity Express 8.6.6 provides support for Cisco Unified Communications Manager 9.1.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel8_6/rel_notes/rel_notes86.html#pgfId-411381
Because you are moving from a pre-7.1 CUE version you will need to follow the CSL License migration process;
NoteWhen you upgrade to Cisco Unity Express Release 8.6.x from any release prior to Cisco Unity Express Release 7.1, you must replace your pre-CSL licenses with CSL licenses. You must migrate your licenses for the mailbox features and port features. If you have purchased the optional IVR features, you should also migrate your licenses for the IVR features.
Software Activation for Cisco Unity Express 7.1 and Later Versions
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel7_1/Licensing/CUELicensing_book.html
Cheers!
Rob

Question license splitting in CUCM 6.x

Hi All,
Under the old 4.x model you were able to split the roles of you CCM's without a license penalty.
eg. I have 3 servers licensed but I actualy have 5 servers in the cluster 3 servers running all services except TFTP and IPVMS 2 servers ONLY running TFTP and IPVMS.
This was totaly valid under the license rules for 4.x but now with 6.x there is license enforcement so what I want to know is can I run the same cluster above with only 3 node licenses or will I need to have a full node license for the 2 boxes only doing TFTP and IPVMS?
I am posing this question through my local Cisco guys but thought someone else may have run into it. Any help would be great.
Cheers,
Ben.

AFAIK the CCM node license is only required for the CUCM service. in my lab i have 2 servers, if i shut down the CCM service in the SUB and go to license viewer i get 2 licensed nodes, 1 used and 1 available.
the CCM node license refers to a node in which you will be doing call processing or in which you will have the service running as a backup server.
the TFTP service should not require the license but to be honest i'm not sure if it's required to run IPVMS. according to the test i did in my lab it should not be, since the only service i stopped was the CUCM service and all the others kept running.
HTH

How do i get win 8.1. *pro* for mac parallels, deauthorizing win 8.1 pro and license rules for windows vms

ok, i've seen this question asked a number of times. i know the general procedure:
- first download some installer things to a window box so i can make a bootable DVD / flash drive
- go the mac and use the DVD / usb stick to install the virtual machine
great.. BUT :
1) unfortunately, i'm still really confused at the most basic part which is where (link) do i actually get the initial download thing to create the 8.1 *PRO* from microsoft and where (link) / how do i pay for the subscription key to install the thing????
i keep seeing a link for windows 8 or windows 8.1 where windows PRO is NEVER mentioned. i ABSOLUTELY MUST HAVE a) PRO 64 bit and NOT vanilla windows and b) it MUST BE A FULL INSTALL (i'm not upgrading from windows 7, 8 or 8.1 NON pro.. i'm going
to be installing this thing on a brand new system.
i'm an IT guy for two decades and i can tell you trying to find, download, install a clean version of windows 8.1 PRO is a royal pita and nothing about windows 8.1 PRO is intuitive on the MS site. it's almost as if they do NOT want you to install the
thing. i'm not trying to bust jewels here, i'm just being honest and providing feedback that you folks need to make this much more clear and intuitive. people really shouldN'T have to post on forums to find out how to purchase, download and enter
in a subscription key for a base version of an OS. it's crazy.
2) once i can figure out how to download, install and register the darn thing ;)... i'm curious how the licensing works.
2a) first if my windows 8.1 pro experiment on mac parallels sucks, i want to be able to remove the authorization so i can reinstall 8.1 pro on another system.   can i / how do i do this in my scenario?
2b) i actually already bought windows pro 8.1 about a year ago (to upgrade a laptop that came with 8 that i needed to upgrade to vanilla 8.1 then to finally to pro) so that i could windows phone 8.1 development with simulator on the laptop. unfortunately
the laptop maxed out at 4G and the performance of the emulator was ridiculously slow that it's unusable. i'd love to somehow be able to put the laptop back to windows *vanilla* 8.1 and reclaim my 8.1 pro that i *already* purchased by removing the authorization
from that laptop allowing me to reinstall the full 8.1 pro with the same key on the mac with parallels. then i can sell the laptop that has sat there collecting dust for a year and regain my windows 8.1 pro investment vs having to buy another copy for
the mac.
i have no idea how to do this though i think it should be possible. can anybody tell me where / how i do this?
note the win pro 8.1 install never went well so i actually had some guy from MS login to my laptop remotely and do the install.. in doing so i believe he wiped away the original windows vanilla 8.1 recovery partition asus put on the drive meaning i'm not
sure i can get the laptop back to 8.1 or 8 vanilla so i can resell it functionally to another person while removing my 8.1 *pro* license from it.   any suggestions here highly welcome.
2c) once i get the windows 8.1 pro installed in a vm under parallels, i'll have one licensed copy running. my guess is that is what i'm limited to. but when you start working with VMs the whole purpose is to be able to create multiple test
enviornments and dispose of them when you don't need them etc.   since the window will be tied to the single mac hw id, will i be able to install multiple *win* vms (duping an exising win vm for instance) from the one license or must i purchase
multiple win licenses for each win vm on the SAME system?   if you need a new license for each vm, wouldn't i have to do a FULL WINDOWS INSTALL every time i wanted to create another windows VM.. THAT IS CRAZILY INEFFICIENT...
there has to be some kind of option to dup a windows licensed vm on the SAME system yes? what are the rules / procedures for making this work.
i'm using parallels on mac as an example but the same question would apply to using hyperV (which i know nothing about at this point) as the virtual host platform as well.
i'm open to well thought out links that actually answer these questions succinctly in addition to comments here
thanks in advance

Hello bigbobber,
If you have issue in using Windows 8.1 Pro in the software parallels in MAC?
About this issue, it is recommended to contact the related parallels support.
About the license issue, please read the following article about Buyer’s Guide and Microsoft software license agreement windows 8.1.
http://www.microsoft.com/licensing/about-licensing/windows8-1.aspx
It is recommended to contact the phone support if you have license issue.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have the License Number for CS6 Creative Suite How does this translate for "Creative Cloud"

I have the License Number for CS6 Creative Suite, but when I downloaded Creative Suite and tried to license the product, it keeps coming up with an error, "The Serial Number is not valid for Adobe Photoshop CC." How do I register my product?

Photoshop CC is the equivalent of CS7... and it is available ONLY by paying for a monthly subscription... your CS6 serial number does not work for CC
-http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
--has a link to manage your membership which may help

Remote Desktop Licensing Server for multiple deployments

Hi all. I'm towards a project of implementing 4 deployments of RDS in branch offices and 1 in head office. Those tend to be VMs on Server 2012 R2.
I've began collecting info from technet and even found that great post:
http://blogs.technet.com/b/yungchou/archive/2010/01/04/remote-desktop-services-rds-architecture-explained.aspx
but I still can't figure out if I'm to use separate licensing server for all deployments or there is a possibility to use a single one for 5?

If all machines are in the same domain a single license server will be fine. you will just need to add the licence server to your individual deployments via server manager. We have a single license server for 2003TS, 2012RDS 2012citrix VDI and 2008 Citrix
XenApp

License Rehosting for CUCM 8.5 to 9.1.2 Virtualization and Upgrade

Similar Messages

Maybe you are looking for