License type change in ECC PRD

Hi All,
Currently all user id is being created in ECC system through HR trigger and default license type is mySAP ERP ESS User. but i want to create deterrent request type to up update license type from mySAP ERP ECC User to mySAP ESS Processional.
can you please help me how to configure to update license type.
Regards,
Arif

Hi Arif
Run transaction USMM in ECC. In there you set the default user type (license type).
The user types that show up or can be defined depends on the Price List selected.

Similar Messages

ECC License Type change Through GRC

Hi All,
I want to create custom field for ECC license type. so user can submit request to change their own license type.
Example: currently all user id is already created in SAP with Test license and password is deactivated. so if any users want SAP license/userid, the user raise request through GRC system and after approve, license type will be changed automatically.
Regards,
Arif

Hi,
You may want to close this thread and continue at your other thread: License Type Change through GRC
Also refer to this guide as to how to create a custom field within GRC AC: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0e2c628-2690-2e10-0d82-dbf1931db2cd?QuickLink=index&…
Also refer to the following thread:
AC10 - Mapping Custom Fields to Backend Field

License Type Change through GRC

Hi All,
currently ECC user id is being created through GRC HR trigger. but BASIS team manually changing license type after getting physical signe off copy from user. so now we want to automate the system like user request for new ECC id through GRC and it will trigger workflow and license type will automatically changed at end of the request.
GRC version is 10
Regards,
Arif

Hey Arif,
You will have to create a custom field first and then map it to the License type field value in the connector within "Maintain mapping for actions and connector groups" section within IMG.
Once this is done, you will be able to maintain the License type value from the "Custom fields" tab of a access request form.

Changes in ECC 6.0 from 4.6

Hi Experts,
Can you give me some ideas on what are the changes in ECC 6.0 from the following SAP Transactions, Many Thanks
General ledger     FI
- post document with different document types     FI     "
FB50"
- display document     FI     FB03
- reverse document     FI     FB08
- print document     FI     F.62
- display/change line items     FI     FBL3N
- display balancies     FI     FS10N
- clear account     FI     F-03
reporting     FI
- P/L+B/S     FI     S_ARL_87012284
- document journal     FI     S_ALR_87012287
- general ledger     FI     S_ALR_87012282
Closing     FI
- valuation AP and AR     FI     F.05
- valuation G/L     FI     F.05
- valuation bank accounts     FI     F.05
Others     FI
- standard analysis     SD     MCSI
- creating order     CO     KO01
Master records
- creating account in chart of account     FI     FSP0
- creating account in company code     FI     FSS0
- edit financial statement     FI     OB58/FSE2
- exchange rates     FI     S_BCE_68000174
- open and close period     FI     S_ARL_87003642
Accounts payable     FI
- create vendor     FI     FK01
- document entry/fast entry     FI     FB10
- post/delete invoice     FI     FBV0
- vendor display/change line items     FI     FBL1N
- payment run dom/foreign test also with bank     FI     F110
- post manual outgoing payment     FI     F-53
- post manual incoming payment     FI     F-52
Reporting     FI
Accounts receivables
- change customer master data     FI     XD02
- post invoice     FI     FB70
- customer display/change line items     FI     FBL5N
- post manual incoming payment     FI     F-28
- dunning run     FI     F150
Reporting     FI
- open items     FI     F.27
- account statement     FI     F.27
- customer line items     FI

Dear Jaffer,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Default License Type in SU01

Hi experts,
We have recently had a change in our licensing agreement such that almost all of our users (approximately 99%) will be assigned to one license type going forward. With respect to creating new users with this license type, is there any way to default the license type in SU01, so we don't have to fill out this field every time (since all users will now be created with the same type)?
Thanks,
HC

Thanks. I had seen that and read it several times. I reread it again. It's still not what I'm after. It looks to be a work-around to not having USMM access and was not actually implemented. I have the needed USMM access.
Let me phrase my issue...
On Production, I start USMM. In the lower half of the screen, I slect the "Price lists" tab. Only the "SW Component Price List" is checked. The "Default User Type" shows "Operational."
I want it to be "SAP Business Warehouse User." Thus when new users are created through SU01 the new user creation process will not have to include changing the license type from "Operational" to "SAP Business Warehouse User."
Ultimately I just after having each new user created as an "SAP Business Warehouse User" when nothing is done through the SU01 license tab.
Bob

Material Created/changed in ECC needs to be updated in thirdparty system

Hi Gurus,
I have a requirement. Please help me on this.
We are having a legacy system (Material Master)which needs to be replaced by ECC 6.0 and data needs to be sent to third party system via middleware as PI.
we also needs to extend message type(Matmas not sure which one we need to consider 01,02,03,04) with additional legacy 10 fields according to the client requirement.
Whenever a material is created/changed in ECC idoc needs to be sent to middleware and then to the thirdparty via middleware.
Please let me know how we can handle this interface. Thanks much.
Regards,
Sanjay

HI Janagar,
I understand you are saying the solution in one word. It would be really helpful if you can expedite the solution as i am handling interfaces for the first time. Thanks much.
Regards,
Sanjeev

License Type (Standard /NetWeaver)

We are requesting the Product License Key of mySAP ERP 2005 ECC 6 with the SAP Kernel Release 7, Database is MS-SQL 2005 and Windows Server 2003 64 bit.
When we are registering our Product on OSS Portal to request the Product License Key with the SAP Kernel 7 & selecting the Standard License, I am receiving the Product Key with the License Type NetWeaver but I had been selecting the Standard License. Product Key with the License Type NetWeaver is not accepting during the license installation.
Then I do request the additional Product Key with the SAP Kernel Release 6.40 (not our kernel version) with the License Type Standard which is generating the Standard License key and has been installed successfully.
SAP Kernel Release 7, which is our version, Product Key has been generating with the NetWeaver License Type is not able to install in the System.
SAP Kernel Release 6.40, which is not our version, Product Key has been generating with the Standard License Type and has been installed successfully.
We are using ERP 2005 ECC6 which is NetWeaver based might be problem in future,
Does NetWeaver component could be disabled ?
Does NetWeaver Component might not be ADD-ON ?
Does Patches might not be installed successfully ?
I have been obtained the Kernel information from System menu Status.Other Kernel Info where kernel and other information are displaying.
REgards
Anwer Waseem
SAP BASIS

Hi Anwer,
This issue should be handled by Support, not SDN. Please open a message with SAP Support.
Best Regards,
Matt

Single document release - License type

Dear all,
We are facing an issue, when rechecking the old import documents which are assigned with License (Created with license type - single document release) are getting legal control block now. The license is not getting recognized for the document.
Before rechecking, the documents were not under any legal control block and the licenses (Single document release - license type) were recognized. What would be the reason behind this? What are the settings to be done specific to single document release- license types?
Kindly share your comments.
Thanks in advace!

Hi Balu,
It also depends on what option was selected when you had manually assigned the licenses to the documents in the past. If it had been B1 System, Manually changed, Cannot be changed by system. This wouldn't have happened.
Now as Aman said, you will have to reassign the licenses to those documents.
I personally feel there is a drawback for Purchase orders in terms of recheck.
Basically a document becomes not valid for re-check or re-determination based on following criteria
1) If its a sales order item- As soon as the order is delivered, the sales order becomes not relevant for check. Which makes sense as the subsequent document is generated. If you check the log, it would say Items not relevant for check.
2) If its an outbound delivery item- As soon as the delivery is PGI'd, it becomes not relevant for check.
3) But for Purchase order- The criteria is set as deletion indicator- Which means, a PO item is relevant for re-check in GTS unless and until it is deleted. Even if a delivery is generated for a STO line item, the PO item is considered as relevant for re-check. This had bitten me in the past.
If you don't remember the manual assignment option selected. Can you check the control settings for Legal control- your legal regulation and see what's set for Manual assignment default. If it's not B1, you may consider changing it.
Regards
Dhilipan

PO Changes from ECC to SRM 7.0 using PurchaseOrderChangedInformation_Out

Hello,
I am having an issue with sending PO changes made in ECC to SRM. When a PO is changed in ECC, I see an XML message with the sender interface name of PurchaseOrderChangedInformation_Out in namespace http://sap.com/xi/APPL/Global2 being created in ECC in SXI_MONITOR.
However this fails in XI because there is no configuration (receiver determination) in XI to handle this sender interface. I have setup the SAP supplied SE_Services_Procurement scenario in XI.
We are on XI 7.0 and SRM 7.0
Has anyone faced this issue before ? Are PO changes handled through PurchaseOrderChangedInformation_Out ? For PO creates I see a PurchaseOrderERPRequest_Out_V1 message being created in ECC and this is indeed transferred to SRM
Thanks
Anil

Dear Anil,
About SRM7.0 and XI please see url:http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE4157EA06BD7BF1A3C7001A64D3F462&id=C66D0901602211DA36BB000F20DAC9EF

Report generation for users having specific license type

Hi friends,
For my project purpose i have to generate report which has userId,License type of the user,corresponding composite role and single roles assigned to the user and transaction code.
I can get the report for user and license type from USR06 and roles,transaction from SUIM.
But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
Thanks in advance,
With kind regards
Karthick

> For my project purpose i have to generate report which has
userId,
License type of the user, TCode: USMM
corresponding composite role and single roles assigned to the user and transaction code.
1. Table: AGR_USERS, AGR_TCODES / USR08
2. SUIM -> a) Users by Complex selection criteria -> Execute -> Click on Roles => Full list of Roles per user.
-> b) Transaction -> Executable for users (all selection option)
>
> I can get the report for user and license type from USR06 and roles,transaction from SUIM.
>
> But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
1. As mentioned by Saby: use TCode SQV1 to map all the tables with a meaningful "foreign key".
2. Download all Table contents and map them in excel by using functions.
Regards,
Dipanjan

BAPI to create and update scheduling agreement (type LZM) in ECC

Hi,
We have a requirement to create and update scheduling agreement of type LZM in ECC from an external system.
Is there a BAPI available for this in ECC 6.0 which can be used?
The integration is using PI.
Regards,
Srivatsan

Hello,
Please use the T-code "SE93" and then click on Display option after entering the T-code. After entering into the detail screen of the T-code, you shall find option to click on OBJECT LIST and then enter into the Function Group. Now enter the T-code and then click on function module and a list of function module will be displayed in referrence to the T-code.
For your easy reference i have also mentioned the flow.
SE93 --> Use tcode (eg. VA01) > display> Object list ---> Function Groups --> Tcode ---> Function module.
Regards,
Sarthak

Transfer material type DIEN in ECC system to CRM product type Service

Hi Experts,
I have a requirement to transfer material type DIEN in ECC system to CRM product type Service.
How can we do this?

Hi Viswanath,
   I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
   Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
       Customer Relationship Management -->
             Master Data -->
                    Products -->
                        Settings for Product Type -->
                                Allow Upload for a Product Type.
   Now here select the check box for product type 02(service).
To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
         Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
//Bhanu

Need to pull License type from GTS to R3 in case of STO documents

Hi Gurus,
Currently, In standard sales order process, we are using 2 functional modules in R3 to get the ECCN number and license type from GTS. This is required to populate on some billing output.
Functional modules used are:
/SAPSLL/***_DOCS_SD0C_FETCH_R3
/SAPSLL/***_DOCS_SD0C_GET_R3
Using above mentioned functional modules, we can only pull ECCN number and license type from GTS only if we pass sales document number to this FM and further system pulls ECCN and license type from GTS by referring the sales document number.
Issue:
We have a requirement is to pull the License type in case of STO documents also but STO documents/STO deliveries are not checked for GTS check, so we can not use above mentioned functional modules to pull the license type from GTS to R3 because STO/PO / deliveries do not exist in GTS.
I just have the material number with me and I need to pull the license type from GTS to R3.
Could anyone please advise the table name or any structure where i can pass the material number in GTS and can pull the license type to R3.
Your kind response would be appreciated.

Hi DG,
Thanks for your kind response. Regarding your second point, I am already pulling the ECCN number by using one customized functional module so I already have ECCN number with me. Could you please brief me how I can pull the License type linked to an ECCN number. What is the relationship table/ logic for pulling the license type by passing the ECCN number ??
Looking forward to your response.
Regards,
Anoop

MRP type change from VB to PD - Problem in old requirements MD04

Hello Experts,
For MRP run we were using VB as MRP type in material master. We upload schedule in scheduling agrrements. At time of MRP run system was only considering based on reorder point only.
Now business disicion is change and we have changed MRP type as PD. So at time of MRP run system should consider based on requirements i.e. from scheduling agreement. Now here is our problem. System consider and shows old scheduling requirement also in MD04. Let me explanin you in detail. Before changing MRP type from VB to PD, there were some schedule available in system. after that we have uploaded 2 3 more schedule. But system still shows old schedule availabe at time of MRP type change.
Can you please help me how to resolve this?? How can we clear old requirements from system.
Thanks in advance for your reply.
Regards,
Piyush

Hi,
Not too sure but , try # SDRQCR21
Regards
Chandrasekhar

Receiver AS2 Advantco Adapter Content type change

Hi All,
I am working on SFTP to As2(Advantco) scenario. We are sending the txt files to target.
As of now file is sent with content type application/xml. But target system is asking to change it to "application/octet-stream"
In the AS2 adapter guide, there is section 3.4.4.8. MIME Settings which talks about content type change.
Unfortunately i am not seeing that in the receiver channel.
does anyone know how to change the content type for AS2 channel?
Will standard adapter module work on third party adapter? like messageTransformBean
Thanks.

This could be because of adapter metadata is not updated one?
>>> Yes. It's very much possible.
Will standard adapter module work on third party adapter? like messageTransformBean
>>> AFAIK - Advantco adapters does support MTB.

License type change in ECC PRD

Similar Messages

Maybe you are looking for