License Types in license determination.

Hi Experts,
I have some doubts on License or legal cotrol (Export/Imports).
1. Can any one give me some examples of license types.
2. Which type of products required licenses and
3. what are the different types of license available for exports to US. and Exporting From U.S to E.U or Other countries.
Please help on this questions .
Appreciate for helpful answer.
Thanks & Regads,
Hari.

Hi Hari,
That’s a question, I was now expecting from you.
Specifically, In US Scenario, we have two kinds of licenses to be obtained from Federal Department of Commerce. These are broadly classified as General Licenses and Validated Licenses.
1. General Licenses:- This is a class of licenses, which can be used by the concerned party directly without any approval from the Government Authorities as soon as its fits a scenario like for the case of License Type EXCPT—License Exception.
2. Validated License Types: - This is class of License which requires prior Approval from the Government Authorities as soon as its fits a scenario like for the case of License Type VL, IVL , IVLP, DSP5 etc.
In this case, there is a further classification as follows:-
VL-->Validated License Type. This is for the above mentioned conditions but without any specific case.
IVL--> Individual Validated License Type. This is again with the above mentioned case but for a specific quantity of a particular product.
IVLP-->Individual Validated License Type (Partner Specific). This is again with the above mentioned case but for a specific quantity of a particular product and for a specific partner involved.
DSP5 etc.--> DSP-5 Application /License for Permanent Export of Unclassified Defense articles and related unclassified data. These classes of License types are specifically to adhere to the ITAR regulation of US Government to ensure movement of Dual use and Defense Articles.
I hope it was the required thing as asked by you.
Regards,
Aman

Similar Messages

Single document release - License type

Dear all,
We are facing an issue, when rechecking the old import documents which are assigned with License (Created with license type - single document release) are getting legal control block now. The license is not getting recognized for the document.
Before rechecking, the documents were not under any legal control block and the licenses (Single document release - license type) were recognized. What would be the reason behind this? What are the settings to be done specific to single document release- license types?
Kindly share your comments.
Thanks in advace!

Hi Balu,
It also depends on what option was selected when you had manually assigned the licenses to the documents in the past. If it had been B1 System, Manually changed, Cannot be changed by system. This wouldn't have happened.
Now as Aman said, you will have to reassign the licenses to those documents.
I personally feel there is a drawback for Purchase orders in terms of recheck.
Basically a document becomes not valid for re-check or re-determination based on following criteria
1) If its a sales order item- As soon as the order is delivered, the sales order becomes not relevant for check. Which makes sense as the subsequent document is generated. If you check the log, it would say Items not relevant for check.
2) If its an outbound delivery item- As soon as the delivery is PGI'd, it becomes not relevant for check.
3) But for Purchase order- The criteria is set as deletion indicator- Which means, a PO item is relevant for re-check in GTS unless and until it is deleted. Even if a delivery is generated for a STO line item, the PO item is considered as relevant for re-check. This had bitten me in the past.
If you don't remember the manual assignment option selected. Can you check the control settings for Legal control- your legal regulation and see what's set for Manual assignment default. If it's not B1, you may consider changing it.
Regards
Dhilipan

Block Sales document if License is missing under any license type

Hi,
We have a scenario where we using multiple license types for a legal regulation. If any license is missing for any license type that determined while screening, the order should be blocked.
For example, For Legal Regulation EAR, we have two License types LTYP1 and LTYP2 and we maintain only License for EAR with LTYP1. During the sales order creation, system screens and found that 2 license types determined. Since 1 license is missing for Legal Regualtion EAR with LTYP2, the order should blocked. But at this moment, system found 1 license with combination EAR with LTYP21 hence it is released.
But when we see the Log, system shows RED indicator against EAR with LTYP2, it means it could not found license for this combination, but the order is released. Our requirement is NOT to release this order and it should determine all the licenses determined for license types
How should we achieved this scenario? Pls help
Regards,
Pradeep

I finally managed to find my way through with this issue so for others who might have the same requirement:
1) Check the check box Check multiple license types under Global Trade Services > Compliance Management > Legal Control > Control Settings for Legal Control
2) Create an entry for the legal regulation and Code List Object PAPOF under Global Trade Services > Customs Management > Customs Code Lists > Assign Customs Code Lists Procedure to Legal Regulation
3) Create the issuing authority for the legal regulation under Global Trade Services > Customs Management > Customs Code Lists > Maintain Customs Code Lists for Legal Regulation
4) Assign the issuing authority to one license type out of two as I've noticed that it won't work if the two license types have the same issuing authority (one created license will release the order).
under Global Trade Services > Compliance Management > Legal Control > Define License Types
Config done on GTS 10.0

How to find the license type ( per seat or per processor ) for exsting sql server instance ?

Hi All,
could you please help me on to find the license type of the existing sql server instance ...
I already tried with below queries to find license type but no luck.
SELECT ServerProperty('LicenseType') as LicenseType, ServerProperty('NumLicenses') as ProcessorCount
Thank You,
rup

Hello,
If you run the following statement, you should be able to get “"Enterprise Edition: Core-based Licensing ..." if the instance
is using a core-based license.
select serverproperty('Edition')
The following post may help you too to determine if you are using Enterprise Core Edition:
http://blogs.msdn.com/b/sql_shep/archive/2012/06/21/sql-server-2012-license-core-limitaion.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Report generation for users having specific license type

Hi friends,
For my project purpose i have to generate report which has userId,License type of the user,corresponding composite role and single roles assigned to the user and transaction code.
I can get the report for user and license type from USR06 and roles,transaction from SUIM.
But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
Thanks in advance,
With kind regards
Karthick

> For my project purpose i have to generate report which has
userId,
License type of the user, TCode: USMM
corresponding composite role and single roles assigned to the user and transaction code.
1. Table: AGR_USERS, AGR_TCODES / USR08
2. SUIM -> a) Users by Complex selection criteria -> Execute -> Click on Roles => Full list of Roles per user.
-> b) Transaction -> Executable for users (all selection option)
>
> I can get the report for user and license type from USR06 and roles,transaction from SUIM.
>
> But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
1. As mentioned by Saby: use TCode SQV1 to map all the tables with a meaningful "foreign key".
2. Download all Table contents and map them in excel by using functions.
Regards,
Dipanjan

Need to pull License type from GTS to R3 in case of STO documents

Hi Gurus,
Currently, In standard sales order process, we are using 2 functional modules in R3 to get the ECCN number and license type from GTS. This is required to populate on some billing output.
Functional modules used are:
/SAPSLL/***_DOCS_SD0C_FETCH_R3
/SAPSLL/***_DOCS_SD0C_GET_R3
Using above mentioned functional modules, we can only pull ECCN number and license type from GTS only if we pass sales document number to this FM and further system pulls ECCN and license type from GTS by referring the sales document number.
Issue:
We have a requirement is to pull the License type in case of STO documents also but STO documents/STO deliveries are not checked for GTS check, so we can not use above mentioned functional modules to pull the license type from GTS to R3 because STO/PO / deliveries do not exist in GTS.
I just have the material number with me and I need to pull the license type from GTS to R3.
Could anyone please advise the table name or any structure where i can pass the material number in GTS and can pull the license type to R3.
Your kind response would be appreciated.

Hi DG,
Thanks for your kind response. Regarding your second point, I am already pulling the ECCN number by using one customized functional module so I already have ECCN number with me. Could you please brief me how I can pull the License type linked to an ECCN number. What is the relationship table/ logic for pulling the license type by passing the ECCN number ??
Looking forward to your response.
Regards,
Anoop

Default License Type in SU01

Hi experts,
We have recently had a change in our licensing agreement such that almost all of our users (approximately 99%) will be assigned to one license type going forward. With respect to creating new users with this license type, is there any way to default the license type in SU01, so we don't have to fill out this field every time (since all users will now be created with the same type)?
Thanks,
HC

Thanks. I had seen that and read it several times. I reread it again. It's still not what I'm after. It looks to be a work-around to not having USMM access and was not actually implemented. I have the needed USMM access.
Let me phrase my issue...
On Production, I start USMM. In the lower half of the screen, I slect the "Price lists" tab. Only the "SW Component Price List" is checked. The "Default User Type" shows "Operational."
I want it to be "SAP Business Warehouse User." Thus when new users are created through SU01 the new user creation process will not have to include changing the license type from "Operational" to "SAP Business Warehouse User."
Ultimately I just after having each new user created as an "SAP Business Warehouse User" when nothing is done through the SU01 license tab.
Bob

License type of SQL Server 2005 Best Practices Analyzer

Hi everybody.
I need to install in my organization the software "SQL Server 2005 Best Practices Analyzer" but I need to know if this application it's free licensing. I have seen on several web sites about this tool it's free but not in official microsoft
web page. So, where can I find the official microsoft information about the type of licensing of "SQL Server 2005 Best Practices Analyzer" ?
Thanks of your support

Hello Erland.
I followed your advice and I have read the terms of use of this software. I stop at point 3 (which I highlighted). Based on this point, I doubt it is about using this application. Furthermore nowhere says that this software is free to use.
Would appreciate if someone can clarify this to me.
=============================================================
MICROSOFT SOFTWARE LICENSE TERMS
MICROSOFT SQL SERVER 2005 BEST PRACTICES ANALYZER:
These license terms are an agreement between Microsoft Corporation (or based on where you live, one of its affiliates) and you.
Please read them. They apply to the software named above, which includes the media on which you received it, if any.
The terms also apply to any Microsoft
* updates,
* supplements,
* Internet-based services, and
* support services
for this software, unless other terms accompany those items.
If so, those terms apply.
BY USING THE SOFTWARE, YOU ACCEPT THESE TERMS.
IF YOU DO NOT ACCEPT THEM, DO NOT USE THE SOFTWARE.
If you comply with these license terms, you have the rights below.
1.
INSTALLATION AND USE RIGHTS. You may install and use any number of copies of the software on your devices.
2.
INTERNET-BASED SERVICES. Microsoft provides Internet-based services with the software.
It may change or cancel them at any time.
3.
SCOPE OF LICENSE. The software is licensed, not sold. This agreement only gives you some rights to use the software.
Microsoft reserves all other rights.
Unless applicable law gives you more rights despite this limitation, you may use the software only as expressly permitted in this agreement.
In doing so, you must comply with any technical limitations in the software that only allow you to use it in certain ways.
You may not
* work around any technical limitations in the software;
* reverse engineer, decompile or disassemble the software, except and only to the extent that applicable law expressly permits, despite this limitation;
* make more copies of the software than specified in this agreement or allowed by applicable law, despite this limitation;
* publish the software for others to copy;
* rent, lease or lend the software;
* transfer the software or this agreement to any third party; or
* use the software for commercial software hosting services.
4.
BACKUP COPY. You may make one backup copy of the software.
You may use it only to reinstall the software.
5.
DOCUMENTATION. Any person that has valid access to your computer or internal network may copy and use the documentation for your internal, reference purposes.
6.
EXPORT RESTRICTIONS. The software is subject to United States export laws and regulations.
You must comply with all domestic and international export laws and regulations that apply to the software.
These laws include restrictions on destinations, end users and end use.
For additional information, see www.microsoft.com/exporting.
7.
SUPPORT SERVICES. Because this software is "as is," we may not provide support services for it.
8.
ENTIRE AGREEMENT. This agreement, and the terms for supplements, updates, Internet-based services and support services that you use, are the entire agreement for the software and support services.
9.
APPLICABLE LAW.
a. United States. If you acquired the software in the United States, Washington state law governs the interpretation of this agreement and applies to claims for breach of it, regardless of conflict of laws principles.
The laws of the state where you live govern all other claims, including claims under state consumer protection laws, unfair competition laws, and in tort.
b. Outside the United States. If you acquired the software in any other country, the laws of that country apply.
10.
LEGAL EFFECT. This agreement describes certain legal rights.
You may have other rights under the laws of your country.
You may also have rights with respect to the party from whom you acquired the software.
This agreement does not change your rights under the laws of your country if the laws of your country do not permit it to do so.
11.
DISCLAIMER OF WARRANTY. THE SOFTWARE IS LICENSED "AS-IS."
YOU BEAR THE RISK OF USING IT. MICROSOFT GIVES NO EXPRESS WARRANTIES, GUARANTEES OR CONDITIONS.
YOU MAY HAVE ADDITIONAL CONSUMER RIGHTS UNDER YOUR LOCAL LAWS WHICH THIS AGREEMENT CANNOT CHANGE.
TO THE EXTENT PERMITTED UNDER YOUR LOCAL LAWS, MICROSOFT EXCLUDES THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
12.
LIMITATION ON AND EXCLUSION OF REMEDIES AND DAMAGES. YOU CAN RECOVER FROM MICROSOFT AND ITS SUPPLIERS ONLY DIRECT DAMAGES UP TO U.S. $5.00.
YOU CANNOT RECOVER ANY OTHER DAMAGES, INCLUDING CONSEQUENTIAL, LOST PROFITS, SPECIAL, INDIRECT OR INCIDENTAL DAMAGES.
This limitation applies to
* anything related to the software, services, content (including code) on third party Internet sites, or third party programs; and
* claims for breach of contract, breach of warranty, guarantee or condition, strict liability, negligence, or other tort to the extent permitted by applicable law.
It also applies even if Microsoft knew or should have known about the possibility of the damages.
The above limitation or exclusion may not apply to you because your country may not allow the exclusion or limitation of incidental, consequential or other damages.
Please note: As this software is distributed in Quebec, Canada, some of the clauses in this agreement are provided below in French.

What type of license do i need to buy?

I'm going to apply diskless desktop system to my class with 2012 server. See below detail explains for 2012 server
what type of license (EX:Windows7) do I need to buy for diskless desktop?
Can I use DSP license already attached on my desktop?
iSCSI Target Boot Overview
Feature description : By using differencing virtual hard (VHDs). you can use a single operation system image
(the "master image) to boot up to 256 computers. As an example, let's assume that you deployed Windows Server 2008 R2
HPC with an operating system image of approximetely 20GB, and you used two mirrored disk drivers to act as the boot
volume. You would have needed approximately 10TB of storage for only the operating system image to boot 256 computers.
Wiht iSCSI Target Server, you will use 40 GB for the operating system base image, and 2 GB for differencing virtual hard disks
per server instance, totaling 552GB for the operating system images. This provides a savings of over 90% on storage for the
operating system
images alone.

Hi,
Regarding the issue here is related with license, we'd better make a contact with the Microsoft licensing team.
Worldwide customers can use the Guide to Worldwide Microsoft Licensing Sites
http://www.microsoft.com/licensing/worldwide.aspx to find contact information in their locations.
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support

License Type (Standard /NetWeaver)

We are requesting the Product License Key of mySAP ERP 2005 ECC 6 with the SAP Kernel Release 7, Database is MS-SQL 2005 and Windows Server 2003 64 bit.
When we are registering our Product on OSS Portal to request the Product License Key with the SAP Kernel 7 & selecting the Standard License, I am receiving the Product Key with the License Type NetWeaver but I had been selecting the Standard License. Product Key with the License Type NetWeaver is not accepting during the license installation.
Then I do request the additional Product Key with the SAP Kernel Release 6.40 (not our kernel version) with the License Type Standard which is generating the Standard License key and has been installed successfully.
SAP Kernel Release 7, which is our version, Product Key has been generating with the NetWeaver License Type is not able to install in the System.
SAP Kernel Release 6.40, which is not our version, Product Key has been generating with the Standard License Type and has been installed successfully.
We are using ERP 2005 ECC6 which is NetWeaver based might be problem in future,
Does NetWeaver component could be disabled ?
Does NetWeaver Component might not be ADD-ON ?
Does Patches might not be installed successfully ?
I have been obtained the Kernel information from System menu Status.Other Kernel Info where kernel and other information are displaying.
REgards
Anwer Waseem
SAP BASIS

Hi Anwer,
This issue should be handled by Support, not SDN. Please open a message with SAP Support.
Best Regards,
Matt

Maintenance Certificate missed in license type

Hello everyone,
We are in the middle of the upgrade to our BW landscape from 3.5 to 7.01. After I upgraded our BWT system today and ready to apply support packages, as usual I go to apply maintenace certificate according to SAP's instruction on "How to Request a Maintenace Certificate manually through SAP support Portal". I found NO "maintenance certificate" under license type, only have "standard and Java" license type. It is very strange since I just applied "maintenance cerfiticate" on 5/15/2009 when I update support package for my BW sandbox (BWS)! Not sure why it is no longer there? Have you guys experience the same? And how can I get my maintenance certificate for my BWT system so I can move forward with my support package update?
Thanks for your help. This is very important since our upgrade is stopped now.
Yujun Ran

Hi,
What kesavan has mentioned above is perfect for manually applying the Maintainance certificates.
These certificates can be made to automatically distribute across the systems in the landscape.
refer to the below FAQ, and also to the below notes;
Note 1280664 - Distribution of maintenance certificates: Troubleshooting
When will a Maintenance Certificate be required by SAP's software logistics tools?*
Maintenance Certificate will be required for all customers as of January '09.
Details:
As of SPAM/SAINT- version 0034 the Maintenance Certificate will be required to import support packages. SPAM/SAINT- version 0034 will be released in January u201909.
All support packages released in 2008 can be applied using a SPAM/SAINT- version prior to version 0034 and therefore do not require a Maintenance Certificate. Hence, when using SPAM/SAINT- version 0034 or higher version, all support packages require a valid Maintenance Certificate in order to be imported.
Java support packages (imported using JSPM) will require a Maintenance Certificate in the near future. Currently a warning is displayed.
Which version of SAP Solution Manager will be required to benefit from automatic deployment of Maintenance Certificates?
SAP Solution Manager 7.0 SP 16 will be required to benefit from automatic deployment.
Regards,
Ravi
Edited by: Ravi Kumar on Jun 23, 2009 8:40 AM
Edited by: Ravi Kumar on Jun 23, 2009 8:44 AM

User license type 53 - error "User type 53 is not active

Hi Experts,
One of our end user is facing this "User license type 53 - error "User type 53 is not active" issue.
Can any one help me what need to be done for resolve this issue.
Appreciate your early response.
Thanks in advance.
Sreenivasu Balaka

User Type 53 is:
53 mySAP Limited Prof. (Cat III) mySAP Business Suite Limited Professional (Cat III)
Check whether the active user types for both the user ids in these two systems are in sync or not. Also make sure that there is no wrong value is set in SU01 for the user id. Both system should contain same settings for company specific settings.. like ... Company address, Decimal Notation of users, Time Zone of user, License type etc. etc. ...
Check these things and let us know what you got.
fyi: User types can be activated in USMM..
Regards,
Dipanjan
Edited by: Dipanjan Sanpui on Jun 15, 2009 6:06 AM

User License type, registration info

Hi, last year I bought Snow Leopard for my MacBook Pro, and I want to find out which type of license I have for Snow Leopard, because my wife now has a Macbook which is still on 10.5.
I can't figure out how to look up my registered products on the Apple site (I have an Apple ID), and there is nothing on the Snow Leopard install DVD (or packaging) that indicates what type of license I bought (and unfortunately I didn't keep a record of it, which I usually do).
Can anyone tell me a) how to access my registered product info on the Apple site; and b) is there any way to figure out what type of license I have for Snow Leopard?
Thanks.

The only licenses available are single-user and family pack (5-user). If it's five-user, it should say it on the box.
There are no explicit licensing restrictions.

User license type

we are on GRAC 10.1 SP6. Created custom field for user license type for both request form and role attribute, both appear. Also followed the SAP note 1736817 for mapping. Maintained mapping for connector group, assign group field mapping. custom field is mapped to system field name LIC_TYPE, table name IS_UCLASS. The field is available for edit on the request, but when submitted, the value does not populate on the target system. Also would like to have drop-down using ACTIVE field in table TUTYPA. If anyone has successfully done either of these, please respond.

Dear Jack,
did you also check note 1736818?
Regards,
Alessandro

License Type Change through GRC

Hi All,
currently ECC user id is being created through GRC HR trigger. but BASIS team manually changing license type after getting physical signe off copy from user. so now we want to automate the system like user request for new ECC id through GRC and it will trigger workflow and license type will automatically changed at end of the request.
GRC version is 10
Regards,
Arif

Hey Arif,
You will have to create a custom field first and then map it to the License type field value in the connector within "Maintain mapping for actions and connector groups" section within IMG.
Once this is done, you will be able to maintain the License type value from the "Custom fields" tab of a access request form.

License Types in license determination.

Similar Messages

Maybe you are looking for