License Usage on CWMS Version1.5 - 50 Port Deployment without IRP

I am not able to understand how the license usage is being accounted in CWMS 1.5.
Currently  I have deployed CWMS - 50 Port without IRP. The CWMS 1.5 is integrated  with CUCM 7.X. There are 3 hosts configured on the system and the  license count is increasing for every meeting that is scheduled. The  license count increases only when the first participants joins the  meeting.
I have tested a few scenarios -
1.  I have hosted a meeting and I joined only the teleconference, Other  participants joined the meeting and the license count increased by '1'
2.  I have hosted another meeting at a different time and did not join the  meeting. Other participants joined the meeting and the license count  increased by '1'
Please Note - In both scenarios the Atendees Join before host option was checked.
I am currently refering the licenses usage scenarios posted on Cisco and has not found any resemblance.
http://www.cisco.com/en/US/docs/collaboration/CWMS/b_planningGuide_chapter_0111.html
Request your help in clarifying how the license usage counts increment.
Thank you.

Hi Joseph and Benjamin,
I am not sure whether you have got the answer for this already, anyway, here is the explanation.
There is a defect opened for incorrect license count shown in the CWMS dashboard. You can check the defect details in the link below,
https://tools.cisco.com/bugsearch/bug/CSCul57521
Our development team analyzed the above defect and identified the root cause of this issue as another defect. The defect details can be seen in the link below,
https://tools.cisco.com/bugsearch/bug/CSCul03486
To summarize the above two defects, sometimes, the telephonic session in CWMS doesn't end correctly and stays active through out. Hence, all the meeting initiated by this user will have one simultaenous meeting always. This is the reason, for licensing count getting increased even the meeting is scheduled in different date and time.
Let me know if you need any further details.
Regards,
Hari

Similar Messages

  • 6120 Fixed Port License Usage

    I was looking around in the 6120 via cmd line and noticed that the "show license usage" output shows that there is an 8 port license but than none are in use. If that is the case do what does licensing the remaining 12 ports do? What happens if you use two of those for northbound Ethernet uplinks?
    show license usage
    Feature                      Ins  Lic   Status Expiry Date Comments
                                     Count
    FM_SERVER_PKG                 No    -   Unused             -
    ENTERPRISE_PKG                No    -   Unused             -
    FC_FEATURES_PKG               No    -   Unused             -
    ETH_PORT_ACTIVATION_PKG       No    8   Unused Never       -
    ETH_MODULE_ACTIVATION_PKG     No    0   Unused             -

    Hi..  I have a similar output in my lab setup. In my lab setup, i did not purchase any license and i can use port 19 and 20, in fact all of the ports. It looks like the license is base on trust and not really enforced.  Rgds Eng Wee

  • System Measurement: Measure and report license usage - System Type

    After a 'system copy' to create  new DEV and QAS PORTAL systems from a copy of PROD the USMM (System Measurement: Measure and report license usage) process identifies the System Type of the new systems as PROD.
    This was first noticed when performing a 'License Audit'.
    System Type:      PROD
    (Ex:   URL http://<server>:<port>:50000/usmm)
    Where can the 'System Type' be changed after a 'system copy'?

    Hi,
    You can change the System Type in Visual Admin under service Licensing Adapter.
    Thanks
    Sunny

  • Crete License Usage

    Hi,
    Create License usage is given to users who can create new reports.
    The audit  event_type (s)  are linked to Create License Usage,
    Event_Type             Event_Type_ID      
    Universe Selected          13     
    Document Edited          22     
    Format Applied          28     
    Drilled Out of Scope    42
    Does it also include the audit event Document Retrieved (event_type=11)?
    Document Retrieved is for for an event where
    1. Web Intelligence: A user has saved a Web Intelligence document within BusinessObjects Enterprise.
    2. Desktop Intelligence client Events,Web Intelligence Rich client events ,Desktop Intelligence client events: User opens an existing Desktop Intelligence document     
    As it seems the second point does  not need Create License Usage, but the first point mean suser is saving the web intelligence document.
    So the question is Does Create License usage also include the audit event Document Retrieved (event_type=11)?
    Regards,
    Urmi

    Hi Joseph and Benjamin,
    I am not sure whether you have got the answer for this already, anyway, here is the explanation.
    There is a defect opened for incorrect license count shown in the CWMS dashboard. You can check the defect details in the link below,
    https://tools.cisco.com/bugsearch/bug/CSCul57521
    Our development team analyzed the above defect and identified the root cause of this issue as another defect. The defect details can be seen in the link below,
    https://tools.cisco.com/bugsearch/bug/CSCul03486
    To summarize the above two defects, sometimes, the telephonic session in CWMS doesn't end correctly and stays active through out. Hence, all the meeting initiated by this user will have one simultaenous meeting always. This is the reason, for licensing count getting increased even the meeting is scheduled in different date and time.
    Let me know if you need any further details.
    Regards,
    Hari

  • Logged-in Resources stat not the same as license usage

    Hello,
    If I look in Real-Time Reporting, the number of logged-in resources is 29.  If I go on the CLI and run show uccx cad license usage, it's telling me that there are 26 licences in use.
    What's the reason for the difference?
    I've tried counting the supervisors, but that doesn't give me the difference.

    Hi Jemima,
    Could you please cross check wih the UCCX's Real Time reporting ,Overall Cisco Unified Contact Center Express Stats report.
    To access the Overall Unified CCX Stats report, choose              Reports                   > Overall Cisco Unified Contact Center Express                     Stats from the Application Reporting menu bar.
    Number of resources currently logged in.
    This will give the accurate results.
    Hope this helps.
    Anand
    Please rate helpful posts !!

  • License usage

    Hi Folks,
    Well I thought I was pretty happy with licensing, and what I understood was:
    1. Licensing is based on number of concurrently active users.
    2. An advanced license is used if an endpoint is allocated an authentication profile based on a rule which uses profiling information/posturing.
    This shows my currentl licensing page:
    and here's a summary from the front page:
    Don't these two already contradict each other?
    I've no idea where 28 advanced licenses have been used. No posturing in place, fairly simple setup, dot1x certs and MAB. Any tips for troubleshooting license usage?
    Ver 1.1.4 Patch 3

    bikespace,
    In ISE 1.1.x, Advanced license is the count of postured, BYOD, or profiled endpoints
    that are active in session directory.
    You can make use of this API reference guide to check the Active session count.
    http://www.cisco.com/en/US/docs/security/ise/1.1/api_ref_guide/ise_api_ref_ch2.html#wp1068744
    The API to check for Active Session count is as follows :
    https://MNTise-node-name/ise/mnt/Session/ActiveList
    Looks like issue with Dashboard query . Dashboard might be taking the count of stale Endpoint sessions as well.

  • Consultation on License Usage Report.

    Hi;
    From one day to another, the "License Usage Report" section began the following message:
    "The system is operating With An Insufficient number of licenses. If additional licenses to cover the shortage are not configured in your Enterprise License Manager Within 59 days, you will no longer be able to provision users and devices."
    The query that I have is that the aggregate IP Phone says "Unassigned" then;
    Should I add a Onwed each User ID? What with that that message would be solved?
    image.
    regards

    refer the link which says
    Licenses in the non-compliant state for Unified Communications Manager are enforced after a 60-day grace period. At the conclusion of the grace period,Unified Communications Manager enforces non-compliance with the following service degradation:
    Devices and Users cannot be provisioned. Changing the configuration of a user that affects licensing (For example: the Enable IM and Presence and the Enable Mobility check boxes) is not allowed.
    Devices and Users cannot be de-provisioned. Any configuration changes that involve licensing (For example: disabling IM and Presence or Mobility) is allowed.
    you need to buy additional licenses to make the non-compliant phones work .
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91_chapter_0100100.html
    regds,
    aman

  • Show license usage output

    Hi Experts,
    Do you know where i can find reason as to why one of the MDS switches showing:
    FS1.DRC# show license usage ENTERPRISE_PKG
    Application
    ROnly Zoning
    But Nothing shows up for these two other switches.
    FS1# sh license usage ENTERPRISE_PKG
    FS2# sh license usage ENTERPRISE_PKG
    I have attached the "sh tech" output of this MDS switches
    Thanks in advance

    Hi,
    FS1.DRC have a zone with read-only attribute (EN12PR03_HBA0_SAN1DRC_SPA0) in vsan31, this vsan is not configured on the other switches.
    Rgds Filiph

  • License usage auditing

    Dear all,
    Looking for a way to audit license usage and requirements in E-Business Suite.
    I understand select * from v$license gives us information about licensing per cpu/core.
    But what about license per module per number of users - is there anyway to interrogate this information to find out whether the business needs to purchase additional licensing?
    Kind regards
    Pawel

    Pawel,
    Please see these links.
    Global Pricing and Licensing
    http://www.oracle.com/us/corporate/pricing/index.html
    Software Investment Guide
    http://www.oracle.com/us/corporate/pricing/software-investment-guide/index.html
    Please contact your Oracle Sales representative, he/she is the best one to answer license questions.
    Thanks,
    Hussein

  • HT4889 Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

    Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

    See Pondini's Setup New Mac guide for possible answers.

  • BCC Deployment without name, project id

    Hi,
    What is a BCC deployment without name and project id?
    It has only deployment id in it and it hangs indefinitely.
    How it can start in BCC production?
    Can it cause catalogue sku deletion?
    Thanks,

    Hi,
    What is a BCC deployment without name and project id?
    It has only deployment id in it and it hangs indefinitely.
    How it can start in BCC production?
    Can it cause catalogue sku deletion?
    Thanks,

  • QOS Network Planning - TCP/UDP Ports used in CWMS 2.5 MDC deployment

    Does anyone know if there is documentation that describes the WAN traffic in CWMS 2.5 MDC?  I'm looking for the TCP/UDP ports that must be prioritized on the WAN to properly class our traffic between the two data centers.  I can't find any such document.  
    Thanks,
    Matt 

    HI Matt,
    All the network requirements are listed in the CWMS 2.5 Planning Guide in Networking Checklist: http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_5/Planning_Guide/Planning_Guide/Planning_Guide_chapter_0100.html
    I hope this is what you are looking for.
    -Dejan

  • Any license issue for using Forms 5.0 deploye application?

    Hello,
    if I using Forms 5.0 to develop an application, then using forms runtime to deploy, have any license issue ?

    Assuming that you have a licence for Forms then it depends on how you are deploying it.
    If you are deploying the application in Client Server mode then tghere is no runtime licence for Forms.
    If you are deploying on the web then you will need a Forms Server licence

  • Do I need license to patch agent through grid control deployment wizard

    In grid control, we have license to use database diagnostics pack and database tuning pack.
    I know wihtout license for provision pack, I cannot patch database homes using grid control deployment tab. But I'm wondering if I can patch grid control agent through deployment page without license for the prvision pack.
    thanks

    There is no management pack license needed for patching the agent. You can get clear details what link needs what packs when you click on '+' symbol (Show Management Pack Information) right to the "About Oracle Enterprise Manager" at the extreme down on OEM screen.
    When you click on "Show Management Pack Information", it will show what pack needed next to every link in paranthesis. If there is no pack information mentioned next to link means, there is no license needed for that link.

  • Tracking technology license usage

    I am looking for ideas/samples of how other Oracle customers track the usage/allocation of their Oracle licensing. This is especially complicated with the technology since most of it is CPU based and must be monitored closely as environments are created/retired. I would like to associate IAS, DB, RAC, and other licensing to the server used, instance supported, and other data.
    I have searched for free-ware that I could adapt, but nothing really exists for this. It is all focused on searching desktops for local installs. Before I create my own spreadsheet/db tool I thought I would ask the greater Oracle community for ideas.
    Doug

    Hi Doug,
    I'll just start by saying that I'd like to see more posts like yours. Hope this will turn out a great discussion.
    OTN is missing a licensing-related forum currently (as far as I know). Even though it is a matter that really could use some community 'crunching'.
    We are tracking use and license metrics with help of a simple spreadsheet. For us it seems less complicated just because it is cpu/core/sockets based. I guess it depends on the environments and standards. (Keeping up with change in agreements and other such matters, on the other hand, seems harder.)
    For the big picture, the different license models and compliance tools is becoming a bigger issue to manage. (a full time job role)
    As a related matter.. with virtualisation it has become harder to manage the costs involved, if you want to charge (internal) customers per exact usage, and the distribution of costs for new investments (when crossing capacity borders).
    About that tool... I'd also be interested in hearing from the community...!

Maybe you are looking for