Licensing for Cisco ESA c380
I am putting a recommendation together for a client to upgrade their existing Cisco ESAs and trying to figure out how the licensing works.
We are looking at c380s across multiple sites, upgrade from their current models which are c160s. Questions:
1.) Do the mailbox licenses need to be procured separately for each c380. For e.g., if the total mailbox no. is 20000 across 4 sites, can the mailbox licenses be bought together and 'split' on individual installs of c380s OR they have to be bought separately for each c380.
2.) If upgrading from the existing ESAs to new, can the licenses be imported from the existing c160s (which will be decommissioned) and exported to the new ESAs?
1) each hardware appliance is licensed separately. You'll need to work with account team/reseller to provide the #/size license as appropriate.
2) If upgrading - yes, you'll just need to transfer the existing "as-is" license from the serial number of the existing appliance to the serial number of the newly purchased appliance. Should be fairly exact to the RMA steps provided in the following article:
http://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118000-technote-esa-00.html
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)
Similar Messages
-
User License for Cisco CUCM 7.1.3
Hi
I need 30 unit license for Cisco Communication Manager 7.1. But I found that it's already end of sale.
I want the unit license part number for cisco cucm 7.1.3 version.
And i found revised part numbers for user license (CUCM-USR-LIC ) but those for 8,x versions. If i purchase that will it support in CUCM 7.1.3?
Thanks in advance.Hi,
CUCM 7 is already end of sale.
CUCM 7.1.5 supports UCL.If we refer the ordering guide of CUCM 8.5, you can get UCL licenses [Basic/essential].
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/UC_8_6_OG.pdf
What I think if u place the order , you should get the licenses and at the backened, it would be DLU.
You can also speak to Cisco SE for further clarity.
regds,
aman -
Contact Center Enhanced License for Cisco 2951 Router
Hi,
I need an urgent help to get the exact part number/details of Contact center enhanced license.
I couldn't find in CCW or any other tool about this license with Cisco 2951 Router (CISCO2951-V/K9).
To run this license on mentioned router, do we need to order it separately or we can take it with router?
Please respond asap.Hi Andre,
I was just refering the Ordering guide which says
Updating UCSS contract when upgrading Unified CCX licenses
UCSS cannot be upgraded from one category to another (e.g. Standard to Enhanced). If
the customer upgrades within the solution, they need to purchase UCSS for greater or
equal value to cover the new version, then they can request a credit on the unused term
of the original purchase from Customer Service
you can also speak to [email protected] for more details on ESW.
regds,
aman -
Security License for Cisco 3900 Series
Hi,
I am having Security License (SL-39-SEC-K9) for Cisco 3900 Series router, Can somebody help me to provide sample config to configure 3945 router to act as firewall. Is there any difference with the native IOS based firewall config..
Regards,
MukeshHere is a detailed instruction on ISR G2 licensing (including downloading, installing, rehosting license, etc.).
Usually, you just need to go to cisco.com/go/license, enter PAK and follow detailed instructions.
HTH
Alexandr -
ASA license for Cisco IP Phone over VPN
Hi,
Are there special licenses required on the ASA to use Cisco IP Phones (Hard phone) over SSL VPN connection?
ThanksHi,
You can purchase the phone proxy license. This elimiates the need to build a VPN tunnel for voice traffic.
It is not mandatory to purchase this license however.
From the ASA configuration guide:
http://www.cisco.com/en/US/docs/security/asa/asa83/configuration/guide/unified_comm_phoneproxy.html#wp1144845
"The Cisco Phone Proxy on the adaptive security appliance bridges IP telephony between the corporate IP telephony network and the Internet in a secure manner by forcing data from remote phones on an untrusted network to be encrypted. "
Don't forget to rate all posts that are helpful. -
Security License for Cisco 3925
Hi,
I have got cisco 3925 without security license. Now I have got the L-SL-39-SEC-K9 license and need to install it. What is the process of installing this license.
Thanks in advance
Regards,
MeroHere is a detailed instruction on ISR G2 licensing (including downloading, installing, rehosting license, etc.).
Usually, you just need to go to cisco.com/go/license, enter PAK and follow detailed instructions.
HTH
Alexandr -
Licensing for Cisco Network Topology Icons
A large collection of Cisco network topology icons is available for download at http://www.cisco.com/web/about/ac50/ac47/2.html. These icons are pretty much the standard for network topology diagrams.
I would like to know if Cisco allows the use of these network topology icons in training materials developed and sold by individuals/companies other than Cisco.Try this
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns982/cvd.html link.
Thanks
Kunal -
There is a trial license for Cisco CSP COLLECTOR ?
(SNTC-CSPC2.3.1.1-RC4-Build_OVF10_1)
PSSMoving this discussion to the Creative Cloud forum.
MarilynDiPasquale if you are attempting to enter a redemption code then I would recommend reviewing Redemption Code Help. The page provides guidance on how you can redeem your code for a membership. -
Hey all,
I have a question about feature licensing for Cisco ISR 1800, 2800, 3800, 2900 series. I know there are differences between all of the series. My main question which applies for all the Cisco ISR series is this:
"If I want to upgrade the IOS to a newer version and upgrade from the basic feature set, do I need to get a license from Cisco? "
If yes:
And if so, how do I go about purchasing a license? Is a support contract needed?
Again, I need to know for each Cisco ISR series. I'd appreciate any help on this.
Thanks,
JohnYou probably want to reach your SE/AM about this so they can explain you exactly how this works, maybe some sales material, or you can also reach pre-sales.
-
License Cisco ESA in Cluster Configuration
Guys,
Do you have any idea about license Cisco ESA in Cluster Configuration
> If i have two appliance in cluster configuration and i have 1000 user, which option for license i must buy ?
1. Just one license for two appliance (which in cluster configuration) with 1000 user capacity
2. Two license with 500 user capacity for each appliance, appliance 1 with 500 user capacity license appliance 2 500 user capacity license
3. Other license.
BRYou only need to buy 1000 user licenses for which ever options or packages you buy. The only option that is not based on the number of users is if you want a Cisco Content Security Management Appliance or SMA for centralized reporting and quarantine.
Another good thing to note, is that if you have a virtual environment the hardware appliances are no longer required, and are not nearly as expensive as they were in the past. So depending on your requirements you may be off the ground pretty quick.
Also make sure to get all your features bundled. I would at least get AMP, Sophos A/V, DLP, and Encryption. This also means you can transfer and copy your license to as many appliances (Physical or Virtual) you need to support your environment. -
Upgrading license for more context cisco asa 5580
Hi guys:
This is the situation I got to firewalls with failover and I need to upgrade the license so I can get more context (right now I have 5 context and I need 10) so I was looking at the procedure and I'm not sure If I need to restart the device or not. I was looking at this procedure:
Upgrading the License for a Failover using ASDM (No Reload Required)
Use the following procedure using ASDM if your new license does not require you to reload. This procedure ensures that there is no downtime.
•1. On the active unit, choose Configuration > Device Management > High Availability > Failover > Setup, and uncheck the Enable Failover check box. Now click Apply. The standby unit remains in a pseudo-standby state. Deactivating failover on the active unit prevents the standby unit from attempting to become active during the period when the licenses do not match.
•2. Choose Configuration > Device Management > Licensing > Activation Key, and enter the new activation key that you obtained with the active unit serial number. Now click Update Activation Key.
•3. Log into the standby unit by double-clicking its address in the Device List. If the device is not in the Device List, click Add to add the device. You might be prompted for credentials to log in.
•4. Choose Configuration > Device Management > Licensing > Activation Key, and enter the new activation key that you obtained with the standby unit serial number. Now click Update Activation Key.
•5. Log into the active unit again by double-clicking its address in the Device List. Choose Configuration > Device Management > High Availability > Failover > Setup, and re-check the Enable Failover check box.
•6. Click Apply. This completes the procedure.
link: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00806b1c0f.shtml#norelasdm
But then I checked on the cisco web page that there are some license that need to reload I see this:
All models
Downgrading any license (for example, going from 10 contexts to 2 contexts).
Note If a temporary license expires, and the permanent license is a downgrade, then you do not need to immediately reload the security appliance; the next time you reload, the permanent license is restored.
link: https://www.cisco.com/en/US/docs/security/asa/asa81/license/license81.html
So I just want to know if I'm UPGRADING from 5 to 10 context the reload applies to my situation or not?
RegardsNo reload is required when you are upgrading from 5 to 10 security context license.
Reload is only required on the following feature:
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/license.html#wp1361750
Hope this helps. -
AnyConnect for Cisco VPN Phone demo license
I want to test VPN Phone in the ASA5520,but "show ver" find the "AnyConnect for Cisco VPN Phone : Disabled", www.cisco.com/go/license i didn't find register AnyConnect for Cisco VPN Phone demo license, how to apply for the demo license??
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 150
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
SSL VPN Peers : 2
Total VPN Peers : 750
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
This platform has an ASA 5520 VPN Plus license.Hi there,
Did you try
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=717
Cheers!
Rob
"Why not help one another on the way" - Bob Marley -
Cisco Call Manager free license for training purpose.
I am going to setup a Cisco IP-Telephoney lab & looking for Cisco Call Manager free software license (What is Cisco has authorized for this purpose).
Is there any available?
Please help me.Duplicate thread of
https://supportforums.cisco.com/thread/2181741
Do not SPAM the forums. -
Does Cisco have any demo license for VCS?
For a study way, I would like to test VCS at my network for a while.
Does Cisco have any demo license for VCS?Hi
I believe you get very limited (1x traversal/1x non traversal) licenses if you just install the software.
Also see this thread; you may get a time limited demo license from the licensing team if you ask nicely.
https://supportforums.cisco.com/discussion/11555961/home-lab-vcs-and-tms#3687717
Aaron -
Release License of Nokia ICC for CISCO
Good Morning,
i have a simple question.
I had a Nokia E series with ICC for Cisco and i have activated the permanent license of this software.
If this cell phone is broken, and so i can't release the license from the option of ICC software directly form the phone, what step do i have to do to release the license?
I have to send an e-mail to a particoular address to Nokia or to Cisco?
what information of cell phone are important and fundamental?
Thanks a lot.Hi,
Here is Nokia support contact information:
http://www.nokiaforbusiness.com/nfb/DetailPage.html?guid=3ddd17be1af09110VgnVCM100000708ef393RCRD
Send email where you explain your problem.
Also include your IMEI code and the licence code in the email.
-Pasi-
Maybe you are looking for
-
I keep getting a message saying no AMD graphics istalled or not working properly on start up on hp laptop This question was solved. View Solution.
-
Can i change fonts or add them to my iphone
Hi, can I change the fonts my iphone uses or add things like emoticons etc?
-
Any extra settings I need to make for Sql Server 2012 Install for the purpose of SP 2013
Hi, I am going to install sql serevr 2012 Ent on a stand alone server Win 2012 box[ say Server2] and I want to make this machine as a db box and will make other box[say Server1] SharePoint box. [ On Server1 where there is no sql server installed ].
-
Hi Guru's I did all the config settings for default text for PO from vendor master, its works on NB type PO, when I create UB type STO i don't see the text defaulting, Is there any config I'am missing, is it possible for having a default text in ST
-
Reg:Operative and simulation version comparison in cn41
Hi, I am doing comparison of date between Operative project and Simulation project(cn41) .But all the object are displaying row wise in single column Project Object Ear Start Ear Finish Acti