Licensing for Cisco Network Topology Icons

A large collection of Cisco network topology icons is available for download at http://www.cisco.com/web/about/ac50/ac47/2.html. These icons are pretty much the standard for network topology diagrams.
I would like to know if Cisco allows the use of these network topology icons in training materials developed and sold by individuals/companies other than Cisco.

Try this
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns982/cvd.html link.
Thanks
Kunal

Similar Messages

User License for Cisco CUCM 7.1.3

Hi
I need 30 unit license for Cisco Communication Manager 7.1. But I found that it's already end of sale.
I want the unit license part number for cisco cucm 7.1.3 version.
And i found revised part numbers for user license (CUCM-USR-LIC ) but those for 8,x versions. If i purchase that will it support in CUCM 7.1.3?
Thanks in advance.

Hi,
CUCM 7 is already end of sale.
CUCM 7.1.5 supports UCL.If we refer the ordering guide of CUCM 8.5, you can get UCL licenses [Basic/essential].
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/UC_8_6_OG.pdf
What I think if u place the order , you should get the licenses and at the backened, it would be DLU.
You can also speak to Cisco SE for further clarity.
regds,
aman

Contact Center Enhanced License for Cisco 2951 Router

Hi,
I need an urgent help to get the exact part number/details of Contact center enhanced license.
I couldn't find in CCW or any other tool about this license with Cisco 2951 Router (CISCO2951-V/K9).
To run this license on mentioned router, do we need to order it separately or we can take it with router?
Please respond asap.

Hi Andre,
I was just refering the Ordering guide which says
Updating UCSS contract when upgrading Unified CCX licenses
UCSS cannot be upgraded from one category to another (e.g. Standard to Enhanced). If
the customer upgrades within the solution, they need to purchase UCSS for greater or
equal value to cover the new version, then they can request a credit on the unused term
of the original purchase from Customer Service
you can also speak to [email protected] for more details on ESW.
regds,
aman

Security License for Cisco 3900 Series

Hi,
I am having Security License (SL-39-SEC-K9) for Cisco 3900 Series router, Can somebody help me to provide sample config to configure 3945 router to act as firewall. Is there any difference with the native IOS based firewall config..
Regards,
Mukesh

Here is a detailed instruction on ISR G2 licensing (including downloading, installing, rehosting license, etc.).
Usually, you just need to go to cisco.com/go/license, enter PAK and follow detailed instructions.
HTH
Alexandr

Are the SG500P SMB switchs supported for Cisco Network Assistant?

Hi, we need to enroll some SG500-28P switches to a CNA? Is this possible? I suppose that CDP feature allow this. Actually, i have installed CNA Ver. 6.0. Thanks in advance.

Hello Fernando,
Thank you for visiting the Cisco Support Community!
Here is a list of all the devices supported by the Cisco Network Assistant for the 6.0 version and later. Many of the 500 series switches, including the SG500-28P Managed Switch, are supported by the CNA. This page will also give you any additional information you may need such as the features of the CNA 6.0 version, any system requirements, and more.
If this post was helpful, please remember to mark this question as resolved to help others in the community! If you have any further questions, please do not hesitate to ask!
Best,
LP

ASA license for Cisco IP Phone over VPN

Hi,
Are there special licenses required on the ASA to use Cisco IP Phones (Hard phone) over SSL VPN connection?
Thanks

Hi,
You can purchase the phone proxy license. This elimiates the need to build a VPN tunnel for voice traffic.
It is not mandatory to purchase this license however.
From the ASA configuration guide:
http://www.cisco.com/en/US/docs/security/asa/asa83/configuration/guide/unified_comm_phoneproxy.html#wp1144845
"The Cisco Phone Proxy on the adaptive security appliance bridges IP telephony between the corporate IP telephony network and the Internet in a secure manner by forcing data from remote phones on an untrusted network to be encrypted. "
Don't forget to rate all posts that are helpful.

Where are the latest VISIO stencils for logical network device icons

I want to use the same icons commonly used in the Cisco white paper documentation. Where is the stencil for VISIO?

Microsoft provided many Visio Stencils at Visio websites, however, if you want to create your own Visio Stencils you can create it in Visio 2010 in the following way
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
1. On the File menu, point to Shapes, and then click New Stencil.
2. To save the stencil, right-click the stencil title bar, and then click Save.
3. Type a name for your stencil, and then click Save..

Licensing for Cisco ESA c380

I am putting a recommendation together for a client to upgrade their existing Cisco ESAs and trying to figure out how the licensing works.
We are looking at c380s across multiple sites, upgrade from their current models which are c160s. Questions:
1.) Do the mailbox licenses need to be procured separately for each c380. For e.g., if the total mailbox no. is 20000 across 4 sites, can the mailbox licenses be bought together and 'split' on individual installs of c380s OR they have to be bought separately for each c380.
2.) If upgrading from the existing ESAs to new, can the licenses be imported from the existing c160s (which will be decommissioned) and exported to the new ESAs?

1) each hardware appliance is licensed separately. You'll need to work with account team/reseller to provide the #/size license as appropriate.
2) If upgrading - yes, you'll just need to transfer the existing "as-is" license from the serial number of the existing appliance to the serial number of the newly purchased appliance. Should be fairly exact to the RMA steps provided in the following article:
http://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118000-technote-esa-00.html
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

Security License for Cisco 3925

Hi,
I have got cisco 3925 without security license. Now I have got the L-SL-39-SEC-K9 license and need to install it. What is the process of installing this license.
Thanks in advance
Regards,
Mero

Here is a detailed instruction on ISR G2 licensing (including downloading, installing, rehosting license, etc.).
Usually, you just need to go to cisco.com/go/license, enter PAK and follow detailed instructions.
HTH
Alexandr

There is a trial license for Cisco CSP COLLECTOR ?

(SNTC-CSPC2.3.1.1-RC4-Build_OVF10_1)
PSS

Moving this discussion to the Creative Cloud forum.
MarilynDiPasquale if you are attempting to enter a redemption code then I would recommend reviewing Redemption Code Help. The page provides guidance on how you can redeem your code for a membership.

Questions about Feature Licenses for 1800, 2800, 3800, 2900, 3900 series ISRs

Hey all,
I have a question about feature licensing for Cisco ISR 1800, 2800, 3800, 2900 series. I know there are differences between all of the series. My main question which applies for all the Cisco ISR series is this:
"If I want to upgrade the IOS to a newer version and upgrade from the basic feature set, do I need to get a license from Cisco? "
If yes:
And if so, how do I go about purchasing a license? Is a support contract needed?
Again, I need to know for each Cisco ISR series. I'd appreciate any help on this.
Thanks,
John

You probably want to reach your SE/AM about this so they can explain you exactly how this works, maybe some sales material, or you can also reach pre-sales.

Cisco PI v2.2 Network Topology Maps

Good afternoon,
I have Cisco PI v2.2 installed on a VM and working fine. I want to add my Network Topology Maps to the main dashboard for ALL users, but I can only see them when logged in as root. How can I get a "standard" user to be able to view these topology maps?
Thanks,
John L.

Dashboards are unique to users. Each user need to set his Dashboard accordingly.
If multiple user's share a common username to login, they should be able to see the same topology map.
In case you want to allow the other users with different roles and groups, you can edit the group they belong to and add Network Topology Map to their permission.
You can see the groups and their permissions under :
Administration > Users, Roles & AAA
Roles who has access to Network Topology: The Network Topology menu will be available to users with below roles:
Admin
ConfigManagers
SystemMonitoring
SuperUsers
Root
-Thanks
Vinod
**Encourage Contributors. RATE Them**

Cisco Prime Infrastructure 2.2 - Network Topology error

He dears,
My Customer has installed over UCS Cisco Prime Infrastructure 2.2.
The network is composed with Switches nexus 93962-px and 2960x. All devices were discovered and inventoried successfully.
The problems is that Network Topology is not showing the connections between devices. Some devices connections are showed (partially) and another not.
We've already checked that CDP is run and working fine on all of switches.
I appreciate your help!
Tks,
Regis

I'm sorry to say that but Prime Infrastructure does not support IP SLA functionality similar to Cisco Prime LMS:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
It's in the developer's plans but there's no schedule yet for this feature.
It's possible to manually configure IP SLA on the device and then define Custom SNMP templates in Prime Infrastructure and poll whatever information you might consider relevant.
This isn't user friendly (exact OID needs to be typed manually) and is a bit quite complicated, though.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

Does Cisco have any demo license for VCS?

For a study way, I would like to test VCS at my network for a while.
Does Cisco have any demo license for VCS?

Hi
I believe you get very limited (1x traversal/1x non traversal) licenses if you just install the software.
Also see this thread; you may get a time limited demo license from the licensing team if you ask nicely.
https://supportforums.cisco.com/discussion/11555961/home-lab-vcs-and-tms#3687717
Aaron

Drawing network topology in Cisco Prime LMS 4.2

Hi all:
I installed the Cisco Prime LMS 4.2 and managed to discover the Cisco devices and user devices like my PC stations.
Then I tried to draw the network topology from this LMS 4.2 and I found the topology under the Configuration and Monitor tab. By clicking to these two tabs, it appears a page of something like below:
Topology Services
You can use Topology Services to:
- View detailed xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- Display the physical and logical services in your network
- xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxx
- xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxx
- xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxx
- xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxx
- xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxx
There is no action click on this page and it looks like an explanation page and cannot do anything.
May I know how to draw the networl topology by this Cisco Prime LMS 4.2?
Hope to hear the answer from anyone know about this soon. Many thanks!
Warmest regards,
tangsuan

Hi Mantej:
Thanks to your link and I have downloaded the Prime LMS 4.2 document.
I then read and installed the JRE first in 64 bits because my Windows OS is 64bits but it still prompts out the Java installation screen. I then installed the JRE in 32 bits.
After that, it has no more Java installation screen. It then request for downloading file at the Windows top bar. I follow the request to riight click to allow the downloading. The Java running and downlaod the file.
After that, I cannot see any difference. Meaning I still cannot access anything for Toplology Services to draw my network topology diagram.
May I know what should be happen and what is the next step to do the topology drawing?
Many thanks!
Regards,
tangsuan

Licensing for Cisco Network Topology Icons

Similar Messages

Maybe you are looking for