Licensing server issue

Hi All,
At the beginning I must mention that I am not an experienced win server user so I apologize if my questions are silly.
I have installed windows server 2008 sp2 r2 standard as a platform for one of our servers and after 3 months it denied me to connect via remote desktop. It says that license server is not configured and to be honest I do not know how to handle this issue.
It is very important for me to be able to connect this server via remote desktop.
Could you please advise how to handle this issue?
Thank you in advance,
Best regards,
BVV

Hi,
I apologize I reply so late. I was drawn to another project and I just found the time to take a look at this issue.
Turns out the issue was caused by the same matter I described in another post so I paste the solution here:
The solution was extremely easy: I should not have enabled Terminal Services. The very root of this situation was when I was installing for a very first time those services were enabled and I thought it should be always in order to connect RDP.Anyway I uninstalled
this role and everything is ok now.
Thank you very much for your patience and assistance!
Best regards,
BVV

Similar Messages

  • Keep receiving 3333 when acquiring new license from license server

    Hi all
    I find error 3333 will always be dispatched by DRMManager if I acquire a new license from the license server. I'd appreciate if anyone could help explain and show me how to fix or get around the issue. Here is the detail:
    User rents a title.
    When he plays it for the first time, the license server issues a voucher will 24-hours playback window set.
    Client starts the playback, the playback window starts count-down.
    After 24 hours, the voucher gets expired.
    User rents the same title again and he goes to play it again on the same computer.
    Client tries to load the local voucher and finds it is expired.
    Client tries to re-load the voucher from the license server again.
    The license server issues a new voucher for the same title with the same parameters set (see below).
    DRMManager dispatches 3333.
    3333 will be dispatched again if goes to #7 again.
    If I remove all local vouchers by using DRMManager.removeDRMVouchers(), the playback would start after re-acqiure the voucher from license server.
    The document metions to "re-acquire the voucher from server if 3333 is received". But it seems not working in my case.
    BTW, here is how we set the parameters when license server issues a voucher for a new rental title (never played before):
    license caching during: 24hour
    playback window: 48hour
    Thanks.

    Hi Hirosh
    Thanks for your help. It's good to know there is a way to hanle this case (even in the license server side).
    The document metions "re-acquire the voucher from server if 3333 is received" is the Flash Runtime Error document. But after double check, I find the suggestion is for error 3332. It's my mistake and I'm sorry.
    Do you know where I can get the support for implementing "issuing new voucher for re-renting same video"? If it's not in the reference implementation where I can find it.
    Thanks.

  • Hi I am facing issue with Remote Desktop Licensing, it is not showing the original available licenses decreasing on the RD Licensing server

    When i added our license servers to one of the clients for RDS, and we three log in, i am seeing issued shows three now but i am still not seeing the total license count decreasing as we have licenses on per Device basis and have 200 licenses for
    our 2012 server. In review configuration, everything is green. 
    Why am i not seeing the decrease and why is there a built-in overuse option coming up and retail purchase count not going down?
    i wanted to paste an image but it says:
    Body text cannot contain images or links until we are able to verify your account.

    Hi,
    1. What version is your RDSH server?  Is it 2012/2012 R2 or 2008 R2 or something else?
    2. If your RDSH is 2012/2012 R2, have you set the licensing mode to Per Device in RDS Deployment Properties?  In addition, is the RDSH server part of a collection?
    3. If your RDSH is 2008 R2, did you set the licensing mode to Per Device in RD Session Host Configuration (tsconfig.msc) or via group policy?
    4. If you could post a ling to the screenshot on one of the image sharing sites we could view it from there.  If not it would be helpful if you could provide the precise name of the pool (you need to make the column wider in RD Licensing) that the RDS
    CALs are being issued from as well as the precise name of the pool for your purchased RDS CALs.  The count columns would be helpful as well.
    5. In the Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-Licensing log on your RD Licensing server there should be events when licenses are issued.  Please provide the event id and precise text of these events.
    Thanks.
    -TP

  • Login issues in SAP B1 (Connection License Server failure)

    After I launch SAP BO and trying login I get the error "Connection with License server failed [Message 60070-15]"
    Please help ASAP

    Before I begin, I must appologize for the term ASAP which I thought I edited but did not update.  I actually found a solution on my own when I decided to uninstall and resinstall again from scratch.  In the control Panen when I was begining the Process I thought of selecting repair on the Server Tools, then after that everything went back normal, I am not getting the issue any longer.
    The description of the issue:
    I was unable to login to SAP 8.8 due to error u201CConnection to the License server failed" and I tried to use License manger as a starting point of troubleshooting but when click on settings, I get u201C Failed to connect to License Server,u201D I click ok and was trying to import again the License key file but I could not because the button was always disabled and no Hardware key was displayed which was not right.
    Thanks

  • RDP License Server (Device Based CALs) is not issuing licenses to Devices.

    Hello,
    My RDP license server is not issuing licenses at all. Here are my environment details:
    This is workgroup environment
    RDP license is Device based CALs and is installed on Windows 2012
    RD Session host server is Windows 2008R2.
    Full communication is allowed both ways between license server and RD session host server.
    Windows firewall is turned off on both license server as well as on RD session host server.
    The Local Administrator’s password on license server as well as on RD session host server is same.
    Now, on RD session host, when I run tlsbln.exe manually, it pops up the usual xxx days left balloon warning.
    However when I run the License diagnostic utility under RD session host Snap-in, the utility connects to the license server fine and shows me the stats. However, in these stats, it show installed licenses are 20 and available license also as 20.
    On the License server, under License server snap-in, My license server also shows that installed licenses are 20 and available are also 20.
    This is not right. The installed should show 20 but the available license should show 19 as my desktop should have consumed one license.
    I had 2 more laptops connecting fine to the RD session host sever and still the available licenses number was still 20.
    Besides, on license server under the license manager snap-in, it did not mention any device names connected. Meaning, it is not aware of it at all.
    Could you please help me understand what am I missing here. Why my license server is not issuing licenses?
    Thanks.

    Hello TP.
    Unfortunately, there are no footprints at all. I have already checked the Even
    viewer logs on RD session host server as well as the License server. No relevant events are logged.
    Also, I have tried with numerous new instances (This whole set-up is on Amazon Web Services). So no, this is the only license server and the RD session hosts do not have any existing license server lurking
    around.
    I know that this DOES work and I made is work in the past.
    However, Our license server got infected and hence I had to crate a new one and now I am facing with this problem.
    Thanks for your time.

  • Issues connecting to License Server after ServerTools upgrade 8.8

    Hi
    To run a preUpgrade Check I needed to upgrade the ServerTools from 2007 to 8.8.
    Since this upgrade I can not connect to the License Server anymore.
    Does somebody have an idea what could be wrong? I removed and reinstalled it twice and I do have a new license file.
    The upgrader also shows me the COMMON grayed out and I con not run the Check either. I assume this is for the same reason.
    Thanks
    Franz

    Hi Franz,
    After upgrading the server tools with the Upgrade Wizard, the License Server is not started automatically. This issue is documented in a SAP Note [1488839|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1488839]. In order to resolve this issue please start License Manager after the upgrade.
    The 2nd issue (The upgrader also shows me the COMMON grayed out) is described in SAP Note [1433019|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1433019].
    In order to resolve this issue please upgrade your environment either to 8.8 PL10 or to 8.8 PL12.
    hope it helps,
    Regards,
    Ladislav Meszaros
    SAP Business One Forum Team

  • RD Licensing server not issue license

    Hi
    I'm building Windows Server 2012 R2 VDI infrastructure using RDVH that will host Personal Collection Type. I Installed RDS Licensing server and added Windows Server 2012 -RDS Per Device CAL. When user connects to his VM it does not consume RDS Per Device CAL.
    Any idea why?

    Thanks for your answers
    I uploaded picture with the status of my licensing server:
    https://onedrive.live.com/redir?resid=F265A2FD38D6565E!122&authkey=!ADYEwwRWftTt_H4&v=3&ithint=photo%2c.jpg
    I can't use RD LIcense Diagnoser because we don't use RDSH in this implementation, only RD Virtualization Host.
    Other roles are implememented RD Web, RD Gateway, RD Connection Broker.
    I also ran Get-RDLicenseConfiguration on RDCB and get valid output where my mode is PerDevice and fqdn addresses of my license servers

  • Server 2012 - Problem with multiple instances of RDS looking to the same license server. Server Pools requiring the wrong servers.

    Hi All,
    I have two domains, prod.local and test.local.  On prod.local, I have a license server living on the connection broker.  I have created a two way trust between the domains so that the RDS instance on test.local can use the license server on prod.local.
     When I first setup the RDS instance on test.local and point it to use the license server on prod.local everything appears to work, all servers recognize the license server.  
    However when I log off and back on, and click the RDS dashboard in test.local, the Remote Desktop Services overview states I need to add every server from prod.local to the server pool.  This is bothersome because the Remote Desktop Services on test.local
    is still functioning, but I am no longer able to manage it.  When I add the servers from prod.local to the server pool I am displayed the setup for prod.local instead of test.local
    Is there a way around this?  Can I use the same RDS license server key multiple times?
    tldr: Using a different domain's license server causes my RDS instance in Server Manager to display the wrong RDS farm.

    Hi Nathan,
    Thank you for posting in Windows Server forum.
    Please check the required ports must be opened on firewall.
    - To issue RDS Per User CALs to users in other domains, there must be a two-way trust between the domains, and the license server must be a member of the Terminal Server License Servers group in those domains.
    - To restrict the issuance of RDS CALs, you can add RDS Host Servers into Terminal Server Computers group on RDS Licensing servers.
    - Configure RDS licensing server on all RDS Host Servers in each domain/forest. You can do it through RDS host configuration snap-in or through a group policy. 
    - Add administrators group of each domain/forest in the local administrators of RDS licensing server. This way, you’ll not get a prompt to enter your credentials when you’ll open RDS host configuration snap-ins in trusted domains/forests.
    More information:
    Best practices for setting up Remote Desktop Licensing (Terminal Server Licensing) across Active Directory Domains/Forests or Workgroup
    http://support.microsoft.com/kb/2473823
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Server 2012 R2 RDS- Only want the Session Host, Connection Broker and Licensing Server!

    Hi all,
    Wondering if anyone has experience with implementing Remote Desktop Services (RDS) on Windows Server 2012 R2.
    I am doing an RDS design for a platform where we only need an RDS Session Host, Licensing Server and Connection Broker. We do not need web access as these servers will simply be jump boxes internally!
    However, implementing this correctly in our test environment has proved to be tricky. The options are:
    Use the Server Manager and do a traditional install via Roles and Features ( specifically add the Session Host, Licensing Server and Connection Broker). The installation process seems to go through ok in this scenario but when I head over to the Remote
    Desktop Services section of the Server Manager I simply get the message 'An RDS Deployment does not exist in the server pool. To create a deployment head to Roles and Features'.
    Use the specific ‘Remote Desktop Services installation’ option on the Server Manager and do a Session Based Desktop deployment and Quick Start. This installation process seems to go through correctly and the Remote Desktop Section seems to be working
    correctly via the Server Manager. However this process is ‘hard locked’ i.e. it installs the session host, web access and connection broker. I can then remove the web access component later from Roles/ Features.
    Is there a best practice (if any) for installation? i.e. Will there be any issues down the line if I remove RDS Web Access from my server while following method 2?
    There is a complete lack of documentation from Microsoft here so not sure what to do! Just need a basic RDS session based deployment.

    Hi,
    As I know from server 2012\R2 the best deployment skill is to perform via “Remote Desktop Services” installation mode with Standard deployment and don’t let single role to install. Because when we install through RDS mode, there are specific extra tools and
    services activated along with that deployment which you can’t find with single role installation. And that is for sure, when we install RDS role as of this, by default we will get install RDCB, RDSH and RDWA role installed.
    Sorry don’t have any option to try to remove that role as that role basically needed for RemoteApp and Desktop purpose. But if you want then you can try it with help of “Remove-RDServer”Powershell command.
    https://technet.microsoft.com/en-us/library/jj215506.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Why am I getting the error: error getting license License Server communication problem W_ADEPT_CORE_EXPIRED when I try to download a book from the public library using Adobe Digital Editions. It has been working for a few months, but now I suddenly get th

    I have checked and the Adobe Digital Editions is authorized. The library book doesn't expire for another 14 days.  These have been the only two suggestions that I have found in other forums.  Does anyone have any other suggestions?

    I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
    I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
    Error getting License. License Server Communication Problem only mine says  Bad Device key after.
    Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
    i hope someone answers this soon.

  • License server refimpl install

    Hello everybody!
    We got trial Flash access license server. We decided to enroll reference implementations first to test FA potentialities. For this purposes we have debian linux 2.6.26-2-xen-amd64 x86_64 with FA_2 distrib copied to it.
    jdk1.6_20, MySQL 5.1, JDBC Driver, Tomcat 6.0.18 are installed as required in protectContent.pdf document.
    Here is the sequence of steps made to deploy FA to this machine:
    1.       In “/etc/profile” I’ve added JAVA_HOME=”/usr/” and CLASSPATH=”/root/Tomcat/6.0.18/libs:/root/javalibs/” variables
    2.       I’ve copied java libs (.jar-s) needed for flashaccess.war build to /root/javalibs/ from FA distrib.
    3.       Сonfigured build-refimpl.xml with corresponding directories in it.
    4.       Run “ant –f build-refimpl.xml all” and it wrote it was successful.
    Here is question number 1:
    How can I check the application’s build was successful (except the ant’s build message “build successfull”)?
    5.       I’ve copied edcws.war flashaccess-packager.war flashaccess.war from wars directory to /root/Tomcat/6.0.18/webapps.
    6.       Top command showed me some java process activity after that (I think that was deployment process activity).
    7.       Then I went to /root/Tomcat/6.0.18/webapps/flashaccess and saw this directory structure:
    Here is question number 2:
    What files should appear in application’s directory after deploying it’s flashaccess.war to the Tomcat container?
    8.       I opened browser and put http://your server:server port/flashaccess/license/v1.
    in the address link. Tomcat shows 404 error page (so the license server is not running correctly).
    9.       In  protectContent.pdf document it is said that if the license server reference implementation installation is correct then $CATALINA_HOME/AdobeFlashAccess.log file should be created. So I went to $CATALINA_HOME and opened it. Here is its output (the record bellow is repeated several times and there is nothing more in that file):
    2010-10-07 18:50:16,655 INFO  [com.adobe.flashaccess.refimpl.packager.RefImplPackagerServer] Packager thread started. Thread: Thread[WatchedFolderPackagerThread,1,main]
    What records should I see if the server is working properly?
    What did I miss in the configuration process to make the License server run properly?
    And also there are two questions bellow:
    1.       How can I check trial keys expiration date?
    2.       Will default encryption policies (reference implementation) work correctly with trial keys?

    [Eric] Before I start with your questions, I believe there may be some confusion between the 2 servers we offer with Flash Access.  Below is a synopsis.
    >> License Server for Protected Streaming is a bare-bones license server that does not support authentication out the box.  This is what the Flash Access Quickstart Guide uses to set you up.  The reasoning for this is that setting up this server requires minimal installation & is rather quick.  However, as this server is bare-bones, it will only issue 1 type of license per tenant folder you have.  Any policy you use to package content will be ignored, and instead, the tenant config will determine what licenses users receive.
    >> Reference Implementation License Server is a full-fledged license server that requires a database (MySQL installer is included) which supports authentication out-the-box, and also issues licenses according to what is specified in the policy packaged with your content.
    I take it that if you are not using the hardware module to store keys, then there is no need to have the pkcs11.cfg file in the licenseserver folder?
    I get an error in the log file for when this file is not specified.
    [Eric] Correct - if you are not using an HSM, you can safely ignore the pkcs7.cfg error in the logfiles.
    1. I am not getting the logging that you are, so to see what I have done wrong is difficult. Which is the log4j.xml that the flashaccessserver uses and where is it located?
    [Eric] It seems like you are using the License Server for Protected Streaming (which is what the Quickstart guide shows you how to install).  The log4j.xml file is included in the flashaccessserver.war file itself.  By default, the logs are stored at {LicenseServer.ConfigRoot}, which is defaulted to "tomcat/licenseserver/".
    2. Following the steps that uwe mentioned, my player drm log reports that the user authentication is failing (with testuser3). What player are you using to test this? Are you running http://localhost:8080/player/SampleVideoPlayer_FP.html# ?
    [Eric] The Protected Streaming License Server (which is what the Flash Access Quickstart guide references) does not support Authentication out-the-box.  You will have to install the Reference Implementation (see the Protecting Content document section #9), or refer to this thread to determine how you can create an authorizer for the Protected Streaming License Server: http://forums.adobe.com/thread/726547?tstart=0
    My call to http://localhost:8080/flashaccessserver/sampletenant/flashaccess/licen se/v1 responds 'License Server is setup correctly'
    I've put the content such that calling http://localhost:8080/Indesign.f4v will download it.
    When I use the sample video player, the auth fails with the message:
    Authentication error event .... event type authenticationError Error code = 3305 [ServerConnectionFailed] Sub Error Code = 404
    [Eric] If you are using the License Server for Protected Streaming (like you seem to be doing above), you should package your content with the License Server URL of: http://localhost:8080/flashaccessserver/sampletenant/
    [Eric] If you are using the Reference Implementation License Server, you should package your content with the following License Server URL: http://localhost:8080/
    So it seems like I am getting a 404, but for what resource I wonder?
    [updated]
    From access log:
    127.0.0.1 - - [18/Oct/2010:13:27:52 +0100] "GET /flashaccessserver/sampletenant/flashaccess/license/v1 HTTP/1.1" 200 33
    127.0.0.1 - - [18/Oct/2010:13:28:22 +0100] "POST /flashaccessserver/flashaccess/authn/v1 HTTP/1.1" 404 -
    cheers,
    /Eric.

  • Windows Server 2012 RDS CALS on Windows Server 2008 R2 Licensing Server

    Hi,
    at the moment we are installing the first couple of Windows Server 2012 in our infrastructure.
    Some of them have installed RDS.
    Now we are wondering whether it is possible to use our existing Windows Server 2008 R2 licensing server for serving the licenses we have (yes we to have new Windows Server 2012 RDS CALS) or whether we have to install a new host based on Windows Server 2012.
    We tried to add the new license to the 2008 R2 licensing server, but it is not possible. The licensing manager's error message: "The license code contains invalid characters or not enough characters."
    Is there any other way?
    Thanks and regards
    Matthias

    Hi matt_will_fix_it,
    How about Windows 2012 R2 ?
    Will a Windows 2012 RD Licensing server provide licences to a Windows 2012 R2 server?
    I have not tested it, but it should work.  Server 2012 R2 requires the same RDS CAL version as Server 2012.  If you try it and have an issue please reply back.
    -TP

  • I keep getting the following message after I download a book and try to open the book from my downloads (in finder) Error getting License. License Server Communication Problem: E_ACT_NOT_READY. It gives me no other information and no options other than to

    I don't really know what to do. I download a book from my library and it then goes to my download folder in finder (I have a macbook pro). When I double click on the downloaded book to open, digital editions comes up and then I get the following message
    Error getting License. License Server Communication Problem:
    E_ACT_NOT_READY
    The only option I have at that point is to close the window. My computer is registered/authorized and I have tried everything I can think of but can't get the books to download into adobe digital editions.
    Help please

    I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
    I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
    Error getting License. License Server Communication Problem only mine says  Bad Device key after.
    Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
    i hope someone answers this soon.

  • Why don't my DRM policies seem to work? Using "License Server for Protected Streaming"

    Do you find yourself setting rights/restrictions in a DRM policy (like disallow playback on Linux), only to see that the right/restriction isn't being enforced when you play your content?  There may be several reason causing this to happen:
    1. If you are using the "Adobe Access Server for Protected Streaming" that came on your ESD/DVD, this streaming-only server is configured to specifically ignore any policy that was used to package content.  Instead, the server itself overrides the entire packaged policy and instead, reads rights from its tenant configuration XML file (flashaccess-tenant.xml) to generate licenses issued back to the requesting device.
    2. Is your license server configured to use a PolicyUpdateList?  This is a list that can be used to override any old policy (according to its Policy ID) and to use a newly defined policy instead.  This is useful if content was pacakged with a policy and then afterwards, the business rules have changed for the particular policy, warranting an across-the-board change to all content packaged with that particular policy.  Using a PolicyUpdateList is essentially a way to version your older (already used) policies.
    3. is your license server overriding the policy manually in its code?  If you're using the Reference Implementation license server (or building your own server from the SDK), your server has direct access to the policy.  The server can add/remove/change any right in the policy before using it to generate a license for the requesting device.  If you're using the Reference Implementation, by default, it will simply generate a license directly from the policy without any manipulation to it.
    4. Are you sure you re-packaged your content using the new policy where you made your changes?  On your license server, since you have access to the policy (it's sent up to the license server as part of the license request), the license server can log the policy ID of the policy.  Check your logs to verify the new policy is actually being used.
    5. Are you sure you're playing back the newly-packaged content?  Caches may be stale.
    cheers,
    /Eric.

    Not possible with a POP account.
    The email account sync process with iTunes syncs (or transfers) email account setup information for select accounts only from your computer to the iPhone. This does not not involve messages.
    The reason the account's Inbox mailbox seemed to sync is because received messages with a POP account are the only server stored messages and if not removed from the server when downloaded by one email client can be downloaded from the server by another - in this case the iPhone.
    If you want Sent messages kept synchronized between your computer's email client and the iPhone's email client, you MUST use an IMAP account for this purpose.

  • Grace period after activating licensing server

    We currently have a windows 2008 server R2 installed in one of our servers. We are basically using that server for connecting via RDP and its currently in 120 day grace period ( terminal server licensing). This is getting expired in another two days. We
    currently have only 40 user cal license with us. It seems we require RDS cals to connect via RDP. Currently the licensing server is currently not activated.
    My query is will there be any additional grace period once I activate the licensing server, during which I will procure the RDS cals. Or any other way to extend it.
    Its little urgent kindly helpp.!.

    Hi,
    Based on my knowledge the user logging on the RDSH (Remote Desktop Session Host servers(s)) that query/get the CALs from the RDS Licensing server) will have issues or stop logging in.
    http://technet.microsoft.com/en-us/library/ee891144(v=ws.10).aspx
    http://technet.microsoft.com/en-us/library/ee891291(v=ws.10).aspx
    Hope this helps.
    Regards,
    Calin

Maybe you are looking for