Licensing with a volume license while offline

I have installed Photoshop on my target computers with no internet access and now need to license them, I have a volume license but this does not provide the key needed to add to the request code to generate a response code, therefore HOW DO I LICENSE THIS DAMN PRODUCT

Hi bored with rubbish,
The steps you tried should active the software offline. However if still the same behaviour then let us try few more steps:
1. If you are in Windows try giving permissions to the following Adobe folders:
  C/Program Files(X86)/Common Files/Adobe-->Check for Read/Write permission
   C/Program Files(X86)/Adobe-->Check for Read/Write permission
   C/Program Files/Common Files/Adobe-->Check for Read/Write permission
   C/Program FIles/Adobe-->Check for Read/Write permission
   C/Program Data/Adobe-->Check for Read/Write permission
On Mac:
Library/Application Support/Adobe-->Check for Read/Write permission
~Library/Aplication Support/Adobe-->Check for Read/Write permission
2. Create a serialize file using AAMEE 3.1 and run the command line: AdobeSerialization --tool=VolumeSerialize --stream --provfile=Absolute_Path_of_prov.xml to serialize the product.
  You may simply copy the Serialization file to the offline machines and run the command line to serialize it.
Please let us know whether it worked.
Regards,
Romit Sinha

Similar Messages

  • Why do changes made with calendar while offline are reversed when latter going online?

    Hello!
    I have a MacBook Pro 13" running Mavericks.
    My particular problem is that after making changes on Calendar while offline (mainly deleting appointments), iCloud will push my old deleted appointments when reconnecting. Extremely annoying since I can`t trust iCloud now not to mess with my appointments and loosing one.
    Any ideas?
    Thanks in advance.
    René

    Assumeably your MB effects are on clips below Video 2.  That means PPRO has to render the change to the MB clips and incorporate the effects on vid 2 clips.
    A workaround sometimes is to razor clips (sections of the timeline) so that you ony render parts  of the clips. Otherwise the entire clip needs rendering for every change.

  • My phone has just been stolen with my car,it is reading offline on fmphone,is there any way to get a location while offline?

    Hi i'm in a bad place right now,my car watch and iphone 5s have just been stolen,my phone is reading 'offline'on find my phone, i was wondering if there was any way to locate the phone while offline?,any help would be very much appreciated.thanks in advance Alex.

    Find My iPhone will display the last location of the device for 24 hours:
    Click on the device on iCloud under Devices (even though the dot is gray). It will take you to the map to show you where it was last "seen" online.
    Sorry about your troubles....
    GB

  • Windows Server 2012R2 Failover Cluster error with mounted volumes

    Hi all,
    I've a problem with mounted volume on a WSFC build on top of Windows Server 2012R2, the situation is:
    M: is the volume hosting mounting points
    disk-1, disk-2, disk-3 are volume mounted on M:\SomeFolder
    Theese volumes are used by a SQL Server Failover Cluster Instance, but my problem is related to WSFC. I've set dependencies so disk-1, disk-2, disk-3 depend upon H:
    If I try a failover of the role "SQL Server" I observe that when the disk come online in the other node they fail with this error:
    Cluster resource 'disk-1' of type 'Physical Disk' in clustered role 'SQL Server (ISQL2014A)' failed. The error code was '0xaa' ('The requested resource is in use.').
    Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it.  Check the resource and group state using Failover Cluster
    Manager or the Get-ClusterResource Windows PowerShell cmdlet.
    If I manually take offline H: and than bring it online and then manually take online all disk (1 to 3) they come online with no error.
    I'm going crazy!

    I've found the root of the problem: the servers are virtual machine on a VMware ESX 5.5 infrastructure, VMware claims that on 5.5 multipath is supported for raw device mapping disks but disabling multipath (I've set to fixed path) the Windows Server Failover
    Cluster stops to get problems.
    Now we have opened a support call with VMware.

  • Is there a way to get Flash to work in a browser while offline?

    In order to work offline I'm using XAMPP to develop a website which is working great except that I can't see any Flash content. External Flash players have no problem working offline but obviously won't load anything but SWFs and FLVs.
    Is there a way to get Flash to work in a browser while offline?
    Thanks
    -Chaz

    You can open a swf file in a browser offline, either as a standalone file or as part of a web page.  If the file is dependent on loading online content in some way, or needs to interact with a server-side script, then it may not get very far.

  • 30gb video iPod, where is my volume bar while playing music?

    I see a white volume bar while playing video podcasts, but not while listening to music. Where is it, how can I get it to show up? Do I need to change the color?

    All of the songs had artwork associated with them (on my computer) from the very beginning. When I uploaded them the first time, shouldn't the artwork have gone with them? When you upload album art, is there a way to find it on the iPod, other than playing the songs? In other words, does it reside in a directory that I can view? If there is, I can at least confirm whether the artwork ever made it to the iPod. It just seems weird that it shows up in iTunes but not on my 'pod.
    I know that I had the setting orginally set at "automatic" and then at some point I changed it to manual, and then back to automatice, which is how it is set now. But again, I prepared my database of songs on my computer (including artwork) before I ever uploaded them to my virgin iPod, so I thought it would have gone with them from the start.

  • Problem with the volume keys on my keyboard.

    Hey everybody,
    I have a problem with the volume keys on my keyboard. This started a couple days ago and I can't seem to figure out how to fix it. When I press the volume up or down buttons, the graphic appears on the screen as it normally would, but has no effect on the volume of the sound coming out of my speakers.  Therefore, the only way to change the volume of music or whatever I am listening to is to use the volume control within the program/website itself (itunes, youtube, etc.) Even changing the volume on the volume icon at the menu bar on top of the screen does nothing.  If anyone has an idea of how to go about solving this issue, I would greatly appreciate it. Thanks!

    First look into the Preference > Sound > Outpur whether internal Speakers are choosen.
    The only Preference to delete I can discover is com.apple.systempreferences.plist in your home Library folder. You can try to move it out to the desktop for example, not to loose all your settings. Restart and see whether the problem still persists. If you don't know how to do this here some Terminal (Applications > Utilities) commands. Enter them by copy and paste followed by <enter>
    mv ~/Library/Preferences/com.apple.systempreferences.plist ~/Desktop/
    restart
    to get it back:
    mv ~/Desktop/com.apple.systempreferences.plist  ~/Library/Preferences/
    confirm with "y" if you are asked to replace this file.
    marek

  • TS3276 ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working fine

    ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working totally fine

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

    There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

    hey HAbrakian!
    You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
    Mac OS X: How to change the behavior of function keys
    http://support.apple.com/kb/ht3399
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Hi ,How can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm or poerwshell . i have struggled for a week.

    Hi ,how can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm
    or poerwshell . i have struggled for a week
    tchocr

    Hi,
    There is no such PowerShell command can achiev this. Maybe you can use a script to get the user name with folder redirection enabled. However, I am not familiar with writing script, and it would be better for you to ask in script forum below for professional
    assistance:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm or poerwshell . i have struggled for a week.

    How can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm or poerwshell . i have struggled for a week.

    Hi,
    There is no such PowerShell command can achiev this. Maybe you can use a script to get the user name with folder redirection enabled. However, I am not familiar with writing script, and it would be better for you to ask in script forum below for professional
    assistance:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

    Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine.  It alwayws works for me but after some minutes the other developer cant work in the application
    He got this error
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
    and When I see the log event after that error, it comes with another error.
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
    He has IIS5 and me too.
    I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
    and in the connection string I have.
    <add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
    I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
    Thats strange.
    The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
    If you want me to send logs please tellme

    Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
    Event Type:        Error
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              17806
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
    Event Type:        Failure Audit
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              18452
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
    I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works. 
    As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

  • My sister had a problem with call volume being too low on the iPhone 5S.  Is the iPhone 6 louder?  Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

    My sister had a problem with call volume being too low on the iPhone 5S.  Is the iPhone 6 louder?  Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

    I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
    Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
    Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
    But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
    Have you tried a bluetooth headset yet?

  • Error with the Package Request while uploading epub package onto ACS4.

    Hi,
    Error with the Package Request while uploading epub package onto ACS4.
    There was an error with the Package Request::<error xmlns="http://ns.adobe.com/adept" data="E_PACK_DATABASE http://localhost/packaging/Package Incorrect%20string%20value:%20'\x92Apran...'%20for%20column%20'creato r'%20at%20row%201"/>
    Cheers
    Vikas

    See http://forums.adobe.com/thread/771689?tstart=0

  • G4 mini has a problem with its volume structure

    My G4 mini has a problem with its volume structure according to Tech Tools Deluxe. One that the application can't seem to repair. Ran it 3 times and it always hangs before it completes the fix. Never hangs in exactly the same place in the repair routine, but always hangs.
    Ran these tests because for the longest time the mini would accelerate (panic) and shut down. Installation on a new system hangs before it completes the install of all the upgrades. Any help would be appreciated.

    I realize it was not clear from the original post whether or not DiskUtility had been tried yet to fix the hard drive.
    To use DiskUtility to repair the drive, you have to boot from the original install disc that shipped with your Mini.
    1) Insert the Install disc and the shutdown the Mini.
    2) Restart the Mini and hold down the C key as soon as the startup chime or beep is heard. Hold it down until you see the "gear" spinning on the screen.
    3) Select your language, but don't proceed any farther with installation. Use the Utilities menu at the top of the screen to run DiskUtility.
    4) In DiskUtility, click once on the hard drive in the left panel, then click on the Repair Disk button in the right panel.

Maybe you are looking for

  • PDF via Response.redirect or direct send does not work

    We have a web site which has a mobile section. We store some PDF's in a Database, retrieve them as needed and send the file to the client. IT works fine on a desktop/notebook, iPhone. but on Windows Phone it just opens the reader, "downloads the file

  • Can't recover iMac from Time Machine backup

    Hi there I need your help! My photos, music, videos, and other data is gone.. Especially the photos i would like to have back, they were stored in my Aperture library (about 13.000 pictures). For a few days ago my iMac (with Mountain Lion) wouldn't s

  • Progammatic update a table with a database view  in the page

    Hi All, I am using JDev 11g. With FOD database schema, I have one database view Products which comes from two tables Products_Base and Product_Transactions. I created three EOs (ProductEO, ProductsBaseEO, ProductTransactionsEO) and three VOs (Product

  • How to find out the encoding of a file

    How to findout the encoding of a file being read? Thanks in advance?

  • Ques-5

    HI, Give me the solution for What is the cash application process in SAP? please solve this issue. Thanks, Rashmi