Life after Calendar Conversion

I posted this in the Snow Leopard and MobileMe forums but it may have some relevance here too.
Like at least a few of you, I waited until the very last minute before converting my MM calendar.  I had been following the trials and tribulations of everyone for some time, and don't recall seeing anything about a couple of things that jumped out at me when I first opened iCal this morning.
1.  I don't seem able to rearrange the order of calendars in the list at the left edge like I could before.
2.  The conversion took several hours, some of which I expected from a message I got telling me that it would take about an hour to finish because of the amount of historical data in the calendar.  Now this afternoon, I've noticed that it goes off for long periods of time (don't know quite how long just yet) when it updates (presumably during or after a sync with iCal or my iPhone).  Is this something I can expect over the long haul?
3.  I know that the new Calendar app doesn't support groups, but does anyone know of a way to "hide" calendars from the list in iCal?  I have a few calendars that I want to keep around for the historical value of events in them but would rather not have to see every time I open iCal.
Other than those nits, I'm pretty happy so far.  Only got a couple of duplicate calendars - empty versions of subscribed calendars - which I quickly dispensed with, and nothing missing that I can see.  Let's hope for the best .

1.  I don't seem able to rearrange the order of calendars in the list at the left edge like I could before.
I'm not seeing that...  I can re-order calendars like always.  That doesn't help you solve this issue, unfortunately.
No idea what to tell you about #2, as I've never seen what you describe there.
3.  I know that the new Calendar app doesn't support groups, but does anyone know of a way to "hide" calendars from the list in iCal?
Next to each calendar in the list in iCal, there should be a check box.  If you uncheck it, it will hide all events in that calendar.

Similar Messages

  • Console does not comes back to life after screen blanking

    edited post on 2014-07-13:
    This problem has nothing to do with suspend-to-RAM and/or suspend-to-disk (hibernate).
    It is a screen blanking on the console triggered by a timeout in the kernel.
    It can be modified (or disabled) with the setterm command for the current session.
    The issue is still unresolved since the console doesn't comes back to life after hitting a key.
    See post#6 on 2014-07-13 for further details.
    Changed title accordingly.
    original post on 2014-07-09 titled "blank screen on resume after suspend but screen OK after hibernation" follows:
    Dell Inspiron 9400 (aka E1705) with Radeon X1400 (RV515) (confirmed by dmesg: loading R500 microcode)
    - arch x86_64 fully updated up to 07-JULY-2014
    - xf86-video-ati open source driver installed
    - no (additional; ie: explicitly) installed power management packages such as pm-utils
    - no X installed
    The problem:
    • hibernation works fine; ie: by closing (and waiting a few seconds) and re-opening the lid
    • however resume after suspend isn't working; ie: by pressing any key to resume ... it seems the screen never comes back to life
    After suspend activates (and after I hit a key to activate resume) I see no activity at all (blank screen) but ... if I type some commands (eg: timedatectl etc) and then I close the lid to activate the hibernation sequence re-opening the lid (say, a minute later) the machine comes back from hibernation as expected and I can see the commands (and output) I typed when the screen was blank so ... it seems to me either:
    • the backlight state is not restored on the resume sequence (first thought)
    • the machine shuts down the screen after (a 10 minute) timeout but never activates the suspend sequence (and will never activate resume then) (second thought while reading dmesg output)
    This problem was present on this laptop since my first (and subsequent) arch installations so it seems is not kernel/driver specific since I did many pacman --sysupgrades in between while learning arch.
    The testing sequence (with related entries on included dmesg output):
    - typed timedatectl ... showing 23.29.04
    - now allowing idle time for the machine to suspend
    - suspend starts at 23.39 (ie: after 10 minutes) ... tag it as event1#1
    - after 30 seconds resuming with the space key and after a few seconds typing (blindly) timedatectl ... tag it as event1#2
    - after 60 seconds closing the lid allowing time for hibernation ... tag it as event2#1
    - after 30 seconds opening the lid ... tag it as event2#2
    - now I can see the output for timedatectl (typed blindly on event1#2) and it shows 23.40.11
    As you can see in attached dmesg output (at the bottom of this post) there are (to me) no evident entries for event1#2 (resuming after suspend):
    ... event#1-1 ... suspend starts here:
    [Mon Jul 7 23:40:12 2014] perf interrupt took too long (2504 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
    ... event#1-2 ... resume from suspend should show some entries here:
    no entries at all
    And the next entry after entering the suspend sequence is the starting of the hibernation sequence (when closing the lid):
    ... event#2-1 ... hibernation starts here:
    [Mon Jul 7 23:41:30 2014] PM: Syncing filesystems ... done.
    [Mon Jul 7 23:41:30 2014] smpboot: CPU 1 is now offline
    ... event#2-2 ... coming back from hibernation (I think) starts here:
    [Mon Jul 7 23:41:30 2014] ACPI: Low-level resume complete
    [Mon Jul 7 23:41:31 2014] Restarting tasks ... done.
    [Mon Jul 7 23:41:31 2014] video LNXVIDEO:00: Restoring backlight state
    So the machine shuts off the screen (and/or backlight) but never enters suspend mode because "restoring backlight state" appears once and should appear twice in my testing.
    Why isn't working then ?
    Because the signal to enter suspend mode is never sent/received by the OS ?
    Which brings me to a key question: is the acpi package (which it is not installed) (or something like that) required for such signaling ?
    In the following post a user claims a similar problem but he can see some activity (after resuming from suspend) by directing a bright light to the screen so the problem there seems to be the backlight not powered up again: it is not my case, when I did the same I saw no activity at all.
    https://bbs.archlinux.org/viewtopic.php?id=183580
    Following is full dmesg output (edited with a couple of lines inserted to keep track of mentioned events):
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuset
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpu
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuacct
    [Mon Jul 7 22:52:56 2014] Linux version 3.15.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jul 1 07:32:45 CEST 2014
    [Mon Jul 7 22:52:56 2014] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
    [Mon Jul 7 22:52:56 2014] e820: BIOS-provided physical RAM map:
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000100000-0x000000007fed33ff] usable
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000007fed3400-0x000000007fffffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f0000000-0x00000000f4006fff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f4008000-0x00000000f400bfff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [Mon Jul 7 22:52:56 2014] NX (Execute Disable) protection: active
    [Mon Jul 7 22:52:56 2014] SMBIOS 2.4 present.
    [Mon Jul 7 22:52:56 2014] DMI: Dell Inc. MP061 /0YD479, BIOS A10 08/26/2009
    [Mon Jul 7 22:52:56 2014] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [Mon Jul 7 22:52:56 2014] e820: remove [mem 0x000a0000-0x000fffff] usable
    [Mon Jul 7 22:52:56 2014] No AGP bridge found
    [Mon Jul 7 22:52:56 2014] e820: last_pfn = 0x7fed3 max_arch_pfn = 0x400000000
    [Mon Jul 7 22:52:56 2014] MTRR default type: uncachable
    [Mon Jul 7 22:52:56 2014] MTRR fixed ranges enabled:
    [Mon Jul 7 22:52:56 2014] 00000-9FFFF write-back
    [Mon Jul 7 22:52:56 2014] A0000-BFFFF uncachable
    [Mon Jul 7 22:52:56 2014] C0000-CFFFF write-protect
    [Mon Jul 7 22:52:56 2014] D0000-EFFFF uncachable
    [Mon Jul 7 22:52:56 2014] F0000-FFFFF write-protect
    [Mon Jul 7 22:52:56 2014] MTRR variable ranges enabled:
    [Mon Jul 7 22:52:56 2014] 0 base 000000000 mask F80000000 write-back
    [Mon Jul 7 22:52:56 2014] 1 base 07FF00000 mask FFFF00000 uncachable
    [Mon Jul 7 22:52:56 2014] 2 disabled
    [Mon Jul 7 22:52:56 2014] 3 disabled
    [Mon Jul 7 22:52:56 2014] 4 disabled
    [Mon Jul 7 22:52:56 2014] 5 disabled
    [Mon Jul 7 22:52:56 2014] 6 disabled
    [Mon Jul 7 22:52:56 2014] 7 disabled
    [Mon Jul 7 22:52:56 2014] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [Mon Jul 7 22:52:56 2014] Scanning 1 areas for low memory corruption
    [Mon Jul 7 22:52:56 2014] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x00000000-0x000fffff] page 4k
    [Mon Jul 7 22:52:56 2014] BRK [0x01b3e000, 0x01b3efff] PGTABLE
    [Mon Jul 7 22:52:56 2014] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [Mon Jul 7 22:52:56 2014] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x7fc00000-0x7fdfffff] page 2M
    [Mon Jul 7 22:52:56 2014] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x7c000000-0x7fbfffff] page 2M
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00100000-0x7bffffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x00100000-0x001fffff] page 4k
    [Mon Jul 7 22:52:56 2014] [mem 0x00200000-0x7bffffff] page 2M
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fe00000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] [mem 0x7fe00000-0x7fed2fff] page 4k
    [Mon Jul 7 22:52:56 2014] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [Mon Jul 7 22:52:56 2014] RAMDISK: [mem 0x3729a000-0x37944fff]
    [Mon Jul 7 22:52:56 2014] ACPI: RSDP 0x00000000000FC1B0 000014 (v00 DELL )
    [Mon Jul 7 22:52:56 2014] ACPI: RSDT 0x000000007FED39CD 000040 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: FACP 0x000000007FED4800 000074 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: DSDT 0x000000007FED5400 004841 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: FACS 0x000000007FEE3C00 000040
    [Mon Jul 7 22:52:56 2014] ACPI: HPET 0x000000007FED4F00 000038 (v01 DELL M07 00000001 ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: APIC 0x000000007FED5000 000068 (v01 DELL M07 27D9081A ASL 00000047)
    [Mon Jul 7 22:52:56 2014] ACPI: MCFG 0x000000007FED4FC0 00003E (v16 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: SLIC 0x000000007FED509C 000176 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: BOOT 0x000000007FED4BC0 000028 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3A0D 0004DC (v01 PmRef CpuPm 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
    [Mon Jul 7 22:52:56 2014] No NUMA configuration found
    [Mon Jul 7 22:52:56 2014] Faking a node at [mem 0x0000000000000000-0x000000007fed2fff]
    [Mon Jul 7 22:52:56 2014] Initmem setup node 0 [mem 0x00000000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] NODE_DATA [mem 0x7fece000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
    [Mon Jul 7 22:52:56 2014] Zone ranges:
    [Mon Jul 7 22:52:56 2014] DMA [mem 0x00001000-0x00ffffff]
    [Mon Jul 7 22:52:56 2014] DMA32 [mem 0x01000000-0xffffffff]
    [Mon Jul 7 22:52:56 2014] Normal empty
    [Mon Jul 7 22:52:56 2014] Movable zone start for each node
    [Mon Jul 7 22:52:56 2014] Early memory node ranges
    [Mon Jul 7 22:52:56 2014] node 0: [mem 0x00001000-0x0009efff]
    [Mon Jul 7 22:52:56 2014] node 0: [mem 0x00100000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] On node 0 totalpages: 523889
    [Mon Jul 7 22:52:56 2014] DMA zone: 64 pages used for memmap
    [Mon Jul 7 22:52:56 2014] DMA zone: 21 pages reserved
    [Mon Jul 7 22:52:56 2014] DMA zone: 3998 pages, LIFO batch:0
    [Mon Jul 7 22:52:56 2014] DMA32 zone: 8124 pages used for memmap
    [Mon Jul 7 22:52:56 2014] DMA32 zone: 519891 pages, LIFO batch:31
    [Mon Jul 7 22:52:56 2014] ACPI: PM-Timer IO Port: 0x1008
    [Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [Mon Jul 7 22:52:56 2014] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [Mon Jul 7 22:52:56 2014] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [Mon Jul 7 22:52:56 2014] ACPI: IRQ0 used by override.
    [Mon Jul 7 22:52:56 2014] ACPI: IRQ2 used by override.
    [Mon Jul 7 22:52:56 2014] ACPI: IRQ9 used by override.
    [Mon Jul 7 22:52:56 2014] Using ACPI (MADT) for SMP configuration information
    [Mon Jul 7 22:52:56 2014] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [Mon Jul 7 22:52:56 2014] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [Mon Jul 7 22:52:56 2014] nr_irqs_gsi: 40
    [Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
    [Mon Jul 7 22:52:56 2014] e820: [mem 0x80000000-0xefffffff] available for PCI devices
    [Mon Jul 7 22:52:56 2014] Booting paravirtualized kernel on bare hardware
    [Mon Jul 7 22:52:56 2014] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
    [Mon Jul 7 22:52:56 2014] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s87168 r8192 d23424 u1048576
    [Mon Jul 7 22:52:56 2014] pcpu-alloc: s87168 r8192 d23424 u1048576 alloc=1*2097152
    [Mon Jul 7 22:52:56 2014] pcpu-alloc: [0] 0 1
    [Mon Jul 7 22:52:56 2014] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515680
    [Mon Jul 7 22:52:56 2014] Policy zone: DMA32
    [Mon Jul 7 22:52:56 2014] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
    [Mon Jul 7 22:52:56 2014] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] Checking aperture...
    [Mon Jul 7 22:52:56 2014] No AGP bridge found
    [Mon Jul 7 22:52:56 2014] Calgary: detecting Calgary via BIOS EBDA area
    [Mon Jul 7 22:52:56 2014] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [Mon Jul 7 22:52:56 2014] Memory: 2043836K/2095556K available (5224K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 51720K reserved)
    [Mon Jul 7 22:52:56 2014] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [Mon Jul 7 22:52:56 2014] Preemptible hierarchical RCU implementation.
    [Mon Jul 7 22:52:56 2014] RCU dyntick-idle grace-period acceleration is enabled.
    [Mon Jul 7 22:52:56 2014] Dump stacks of tasks blocking RCU-preempt GP.
    [Mon Jul 7 22:52:56 2014] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    [Mon Jul 7 22:52:56 2014] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [Mon Jul 7 22:52:56 2014] NR_IRQS:8448 nr_irqs:512 16
    [Mon Jul 7 22:52:56 2014] Console: colour dummy device 80x25
    [Mon Jul 7 22:52:56 2014] console [tty0] enabled
    [Mon Jul 7 22:52:56 2014] allocated 8388608 bytes of page_cgroup
    [Mon Jul 7 22:52:56 2014] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [Mon Jul 7 22:52:56 2014] hpet clockevent registered
    [Mon Jul 7 22:52:56 2014] tsc: Fast TSC calibration using PIT
    [Mon Jul 7 22:52:56 2014] tsc: Detected 1997.384 MHz processor
    [Mon Jul 7 22:52:56 2014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3996.21 BogoMIPS (lpj=6657946)
    [Mon Jul 7 22:52:56 2014] pid_max: default: 32768 minimum: 301
    [Mon Jul 7 22:52:56 2014] ACPI: Core revision 20140214
    [Mon Jul 7 22:52:56 2014] ACPI: All ACPI Tables successfully acquired
    [Mon Jul 7 22:52:56 2014] Security Framework initialized
    [Mon Jul 7 22:52:56 2014] Yama: becoming mindful.
    [Mon Jul 7 22:52:56 2014] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [Mon Jul 7 22:52:56 2014] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [Mon Jul 7 22:52:56 2014] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys memory
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys devices
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys freezer
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys net_cls
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys blkio
    [Mon Jul 7 22:52:56 2014] CPU: Physical Processor ID: 0
    [Mon Jul 7 22:52:56 2014] CPU: Processor Core ID: 0
    [Mon Jul 7 22:52:56 2014] mce: CPU supports 6 MCE banks
    [Mon Jul 7 22:52:56 2014] CPU0: Thermal monitoring enabled (TM2)
    [Mon Jul 7 22:52:56 2014] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
    tlb_flushall_shift: -1
    [Mon Jul 7 22:52:56 2014] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
    [Mon Jul 7 22:52:56 2014] ftrace: allocating 20226 entries in 80 pages
    [Mon Jul 7 22:52:56 2014] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [Mon Jul 7 22:52:56 2014] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (fam: 06, model: 0f, stepping: 06)
    [Mon Jul 7 22:52:56 2014] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
    [Mon Jul 7 22:52:56 2014] perf_event_intel: PEBS disabled due to CPU errata
    [Mon Jul 7 22:52:56 2014] ... version: 2
    [Mon Jul 7 22:52:56 2014] ... bit width: 40
    [Mon Jul 7 22:52:56 2014] ... generic registers: 2
    [Mon Jul 7 22:52:56 2014] ... value mask: 000000ffffffffff
    [Mon Jul 7 22:52:56 2014] ... max period: 000000007fffffff
    [Mon Jul 7 22:52:56 2014] ... fixed-purpose events: 3
    [Mon Jul 7 22:52:56 2014] ... event mask: 0000000700000003
    [Mon Jul 7 22:52:56 2014] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [Mon Jul 7 22:52:56 2014] x86: Booting SMP configuration:
    [Mon Jul 7 22:52:56 2014] .... node #0, CPUs: #1
    [Mon Jul 7 22:52:56 2014] TSC synchronization [CPU#0 -> CPU#1]:
    [Mon Jul 7 22:52:56 2014] Measured 3679205328 cycles TSC warp between CPUs, turning off TSC clock.
    [Mon Jul 7 22:52:56 2014] tsc: Marking TSC unstable due to check_tsc_sync_source failed
    [Mon Jul 7 22:52:56 2014] x86: Booted up 1 node, 2 CPUs
    [Mon Jul 7 22:52:56 2014] smpboot: Total of 2 processors activated (7992.43 BogoMIPS)
    [Mon Jul 7 22:52:56 2014] devtmpfs: initialized
    [Mon Jul 7 22:52:56 2014] pinctrl core: initialized pinctrl subsystem
    [Mon Jul 7 22:52:56 2014] RTC time: 1:53:00, date: 07/08/14
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 16
    [Mon Jul 7 22:52:56 2014] cpuidle: using governor ladder
    [Mon Jul 7 22:52:56 2014] cpuidle: using governor menu
    [Mon Jul 7 22:52:56 2014] ACPI: bus type PCI registered
    [Mon Jul 7 22:52:56 2014] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [Mon Jul 7 22:52:56 2014] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [Mon Jul 7 22:52:56 2014] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [Mon Jul 7 22:52:56 2014] PCI: Using configuration type 1 for base access
    [Mon Jul 7 22:52:56 2014] dmi type 0xB1 record - unknown flag
    [Mon Jul 7 22:52:56 2014] mtrr: your CPUs had inconsistent variable MTRR settings
    [Mon Jul 7 22:52:56 2014] mtrr: probably your BIOS does not setup all CPUs.
    [Mon Jul 7 22:52:56 2014] mtrr: corrected configuration.
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Module Device)
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Device)
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(3.0 _SCP Extensions)
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Aggregator Device)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4134 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3EE9 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4378 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED40AF 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Interpreter enabled
    [Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
    [Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
    [Mon Jul 7 22:52:56 2014] ACPI: (supports S0 S3 S4 S5)
    [Mon Jul 7 22:52:56 2014] ACPI: Using IOAPIC for interrupt routing
    [Mon Jul 7 22:52:56 2014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [Mon Jul 7 22:52:56 2014] PCI host bridge to bus 0000:00
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [bus 00-ff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf4007000-0xf4007fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf400c000-0xfebfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfed00400-0xfed1ffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xffafffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: reg 0x10: [mem 0xefffc000-0xefffffff 64bit]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80000-0xffa803ff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x10: [io 0x01f0-0x01f7]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x14: [io 0x03f4-0x03f7]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x18: [io 0x0170-0x0177]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x1c: [io 0x0374-0x0377]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x20: [io 0xbfa0-0xbfaf]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: PME# supported from D3hot
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: [1002:7145] type 00 class 0x030000
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x14: [io 0xee00-0xeeff]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x18: [mem 0xefdf0000-0xefdfffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x30: [mem 0xefe00000-0xefe1ffff pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: supports D1 D2
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
    [Mon Jul 7 22:52:56 2014] acpiphp: Slot [1] registered
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: [14e4:170c] type 00 class 0x020000
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: reg 0x10: [mem 0xef9fe000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: supports D1 D2
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf4007000-0xf4007fff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf400c000-0xfebfffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfed00400-0xfed1ffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xffafffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: Enabled 3 GPEs in block 00 to 1F
    [Mon Jul 7 22:52:56 2014] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [Mon Jul 7 22:52:56 2014] vgaarb: loaded
    [Mon Jul 7 22:52:56 2014] vgaarb: bridge control possible 0000:01:00.0
    [Mon Jul 7 22:52:56 2014] PCI: Using ACPI for IRQ routing
    [Mon Jul 7 22:52:56 2014] PCI: pci_cache_line_size set to 64 bytes
    [Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
    [Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x7fed3400-0x7fffffff]
    [Mon Jul 7 22:52:56 2014] NetLabel: Initializing
    [Mon Jul 7 22:52:56 2014] NetLabel: domain hash size = 128
    [Mon Jul 7 22:52:56 2014] NetLabel: protocols = UNLABELED CIPSOv4
    [Mon Jul 7 22:52:56 2014] NetLabel: unlabeled traffic allowed by default
    [Mon Jul 7 22:52:56 2014] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [Mon Jul 7 22:52:56 2014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [Mon Jul 7 22:52:56 2014] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [Mon Jul 7 22:52:56 2014] Switched to clocksource hpet
    [Mon Jul 7 22:52:56 2014] pnp: PnP ACPI init
    [Mon Jul 7 22:52:56 2014] ACPI: bus type PNP registered
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00100000-0x7fed33ff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7fed3400-0x7fefffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffa80000-0xffa83fff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4000000-0xf4003fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4004000-0xf4004fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4005000-0xf4005fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4006000-0xf4006fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4008000-0xf400bfff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0xf400-0xf4fe] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0x1080-0x10bf] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0x10c0-0x10df] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0x0809] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0c80-0x0cff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0910-0x091f] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0920-0x092f] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0cb0-0x0cbf] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0930-0x097f] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:08: [dma 4]
    [Mon Jul 7 22:52:56 2014] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [Mon Jul 7 22:52:56 2014] system 00:0a: [mem 0xfed00000-0xfed003ff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:0a: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp: PnP ACPI: found 11 devices
    [Mon Jul 7 22:52:56 2014] ACPI: bus type PNP unregistered
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 8 [mem 0x80000000-0xefffffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 9 [mem 0xf4007000-0xf4007fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 10 [mem 0xf400c000-0xfebfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 11 [mem 0xfec10000-0xfecfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 12 [mem 0xfed00400-0xfed1ffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 13 [mem 0xfee10000-0xffafffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 1 [mem 0xefd00000-0xefefffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 1 [mem 0xefa00000-0xefcfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 2 [mem 0xe0000000-0xe01fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 1 [mem 0xef900000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 8 [mem 0x80000000-0xefffffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 9 [mem 0xf4007000-0xf4007fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 10 [mem 0xf400c000-0xfebfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 11 [mem 0xfec10000-0xfecfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 12 [mem 0xfed00400-0xfed1ffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 13 [mem 0xfee10000-0xffafffff]
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 2
    [Mon Jul 7 22:52:56 2014] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [Mon Jul 7 22:52:56 2014] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [Mon Jul 7 22:52:56 2014] TCP: Hash tables configured (established 16384 bind 16384)
    [Mon Jul 7 22:52:56 2014] TCP: reno registered
    [Mon Jul 7 22:52:56 2014] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 1
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: Boot video device
    [Mon Jul 7 22:52:56 2014] PCI: CLS 64 bytes, default 64
    [Mon Jul 7 22:52:56 2014] Unpacking initramfs...
    [Mon Jul 7 22:52:56 2014] Freeing initrd memory: 6828K (ffff88003729a000 - ffff880037945000)
    [Mon Jul 7 22:52:56 2014] Simple Boot Flag at 0x79 set to 0x1
    [Mon Jul 7 22:52:56 2014] Scanning for low memory corruption every 60 seconds
    [Mon Jul 7 22:52:56 2014] futex hash table entries: 512 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [Mon Jul 7 22:52:56 2014] zbud: loaded
    [Mon Jul 7 22:52:56 2014] VFS: Disk quotas dquot_6.5.2
    [Mon Jul 7 22:52:56 2014] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [Mon Jul 7 22:52:56 2014] msgmni has been set to 4005
    [Mon Jul 7 22:52:56 2014] Key type big_key registered
    [Mon Jul 7 22:52:56 2014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [Mon Jul 7 22:52:56 2014] io scheduler noop registered
    [Mon Jul 7 22:52:56 2014] io scheduler deadline registered
    [Mon Jul 7 22:52:56 2014] io scheduler cfq registered (default)
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: device [8086:27a1] has invalid IRQ; check vendor BIOS
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: device [8086:27d0] has invalid IRQ; check vendor BIOS
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: device [8086:27d6] has invalid IRQ; check vendor BIOS
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
    [Mon Jul 7 22:52:56 2014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [Mon Jul 7 22:52:56 2014] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [Mon Jul 7 22:52:56 2014] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
    [Mon Jul 7 22:52:56 2014] vesafb: scrolling: redraw
    [Mon Jul 7 22:52:56 2014] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [Mon Jul 7 22:52:56 2014] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004400000, using 7552k, total 7552k
    [Mon Jul 7 22:52:56 2014] Console: switching to colour frame buffer device 200x75
    [Mon Jul 7 22:52:56 2014] fb0: VESA VGA frame buffer device
    [Mon Jul 7 22:52:56 2014] intel_idle: does not run on family 6 model 15
    [Mon Jul 7 22:52:56 2014] GHES: HEST is not enabled!
    [Mon Jul 7 22:52:56 2014] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [Mon Jul 7 22:52:56 2014] Linux agpgart interface v0.103
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: RTC can wake from S4
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [Mon Jul 7 22:52:56 2014] ledtrig-cpu: registered to indicate activity on CPUs
    [Mon Jul 7 22:52:56 2014] TCP: cubic registered
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 10
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 17
    [Mon Jul 7 22:52:56 2014] registered taskstats version 1
    [Mon Jul 7 22:52:56 2014] Magic number: 6:49:862
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: setting system clock to 2014-07-08 01:53:00 UTC (1404784380)
    [Mon Jul 7 22:52:56 2014] PM: Hibernation image not present or could not be loaded.
    [Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
    [Mon Jul 7 22:52:56 2014] Write protecting the kernel read-only data: 8192k
    [Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
    [Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
    [Mon Jul 7 22:52:56 2014] random: systemd urandom read with 1 bits of entropy available
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd-udevd[50]: starting version 214
    [Mon Jul 7 22:52:56 2014] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [Mon Jul 7 22:52:56 2014] serio: i8042 KBD port at 0x60,0x64 irq 1
    [Mon Jul 7 22:52:56 2014] serio: i8042 AUX port at 0x60,0x64 irq 12
    [Mon Jul 7 22:52:56 2014] [drm] Initialized drm 1.1.0 20060810
    [Mon Jul 7 22:52:56 2014] ACPI: bus type USB registered
    [Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver usbfs
    [Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver hub
    [Mon Jul 7 22:52:56 2014] usbcore: registered new device driver usb
    [Mon Jul 7 22:52:56 2014] SCSI subsystem initialized
    [Mon Jul 7 22:52:56 2014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [Mon Jul 7 22:52:56 2014] uhci_hcd: USB Universal Host Controller Interface driver
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
    [Mon Jul 7 22:52:56 2014] ehci-pci: EHCI PCI platform driver
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: debug port 1
    [Mon Jul 7 22:52:56 2014] [drm] radeon kernel modesetting enabled.
    [Mon Jul 7 22:52:56 2014] checking generic (d0000000 760000) vs hw (d0000000 10000000)
    [Mon Jul 7 22:52:56 2014] fb: switching to radeondrmfb from VESA VGA
    [Mon Jul 7 22:52:56 2014] Console: switching to colour dummy device 80x25
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: irq 20, io mem 0xffa80000
    [Mon Jul 7 22:52:56 2014] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x1028:0x2002).
    [Mon Jul 7 22:52:56 2014] [drm] register mmio base: 0xEFDF0000
    [Mon Jul 7 22:52:56 2014] [drm] register mmio size: 65536
    [Mon Jul 7 22:52:56 2014] ATOM BIOS: ATI
    [Mon Jul 7 22:52:56 2014] [drm] Generation 2 PCI interface, using max accessible memory
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (128M used)
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
    [Mon Jul 7 22:52:56 2014] [drm] Detected VRAM RAM=256M, BAR=256M
    [Mon Jul 7 22:52:56 2014] [drm] RAM width 64bits DDR
    [Mon Jul 7 22:52:56 2014] libata version 3.00 loaded.
    [Mon Jul 7 22:52:56 2014] [TTM] Zone kernel: Available graphics memory: 1026556 kiB
    [Mon Jul 7 22:52:56 2014] [TTM] Initializing pool allocator
    [Mon Jul 7 22:52:56 2014] [TTM] Initializing DMA pool allocator
    [Mon Jul 7 22:52:56 2014] [drm] radeon: 128M of VRAM memory ready
    [Mon Jul 7 22:52:56 2014] [drm] radeon: 512M of GTT memory ready.
    [Mon Jul 7 22:52:56 2014] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [Mon Jul 7 22:52:56 2014] [drm] radeon: power management initialized
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [Mon Jul 7 22:52:56 2014] hub 4-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 4-0:1.0: 8 ports detected
    [Mon Jul 7 22:52:56 2014] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
    [Mon Jul 7 22:52:56 2014] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: WB enabled
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffff8800370f4000
    [Mon Jul 7 22:52:56 2014] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [Mon Jul 7 22:52:56 2014] [drm] Driver supports precise vblank timestamp query.
    [Mon Jul 7 22:52:56 2014] [drm] radeon: irq initialized.
    [Mon Jul 7 22:52:56 2014] [drm] Loading R500 Microcode
    [Mon Jul 7 22:52:56 2014] [drm] radeon: ring at 0x0000000010001000
    [Mon Jul 7 22:52:56 2014] [drm] ring test succeeded in 10 usecs
    [Mon Jul 7 22:52:56 2014] [drm] ib test succeeded in 0 usecs
    [Mon Jul 7 22:52:56 2014] [drm] radeon atom DIG backlight initialized
    [Mon Jul 7 22:52:56 2014] [drm] Radeon Display Connectors
    [Mon Jul 7 22:52:56 2014] [drm] Connector 0:
    [Mon Jul 7 22:52:56 2014] [drm] VGA-1
    [Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [Mon Jul 7 22:52:56 2014] [drm] Connector 1:
    [Mon Jul 7 22:52:56 2014] [drm] LVDS-1
    [Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] LCD1: INTERNAL_LVTM1
    [Mon Jul 7 22:52:56 2014] [drm] Connector 2:
    [Mon Jul 7 22:52:56 2014] [drm] SVIDEO-1
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] TV1: INTERNAL_KLDSCP_DAC2
    [Mon Jul 7 22:52:56 2014] [drm] Connector 3:
    [Mon Jul 7 22:52:56 2014] [drm] DVI-I-1
    [Mon Jul 7 22:52:56 2014] [drm] HPD1
    [Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] CRT2: INTERNAL_KLDSCP_DAC2
    [Mon Jul 7 22:52:56 2014] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
    [Mon Jul 7 22:52:56 2014] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
    [Mon Jul 7 22:52:56 2014] hub 5-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 5-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: version 2.13
    [Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    [Mon Jul 7 22:52:56 2014] scsi0 : ata_piix
    [Mon Jul 7 22:52:56 2014] scsi1 : ata_piix
    [Mon Jul 7 22:52:56 2014] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
    [Mon Jul 7 22:52:56 2014] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
    [Mon Jul 7 22:52:56 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
    [Mon Jul 7 22:52:56 2014] ata1.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8860, max UDMA/133
    [Mon Jul 7 22:52:56 2014] ata1.00: 62500000 sectors, multi 8: LBA48 NCQ (depth 0/31)
    [Mon Jul 7 22:52:56 2014] ata1.00: configured for UDMA/133
    [Mon Jul 7 22:52:56 2014] scsi 0:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5
    [Mon Jul 7 22:52:56 2014] ata2.00: configured for UDMA/33
    [Mon Jul 7 22:52:57 2014] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [Mon Jul 7 22:52:57 2014] hub 4-1:1.0: USB hub found
    [Mon Jul 7 22:52:57 2014] hub 4-1:1.0: 4 ports detected
    [Mon Jul 7 22:52:57 2014] [drm] fb mappable at 0xD00C0000
    [Mon Jul 7 22:52:57 2014] [drm] vram apper at 0xD0000000
    [Mon Jul 7 22:52:57 2014] [drm] size 9216000
    [Mon Jul 7 22:52:57 2014] [drm] fb depth is 24
    [Mon Jul 7 22:52:57 2014] [drm] pitch is 7680
    [Mon Jul 7 22:52:57 2014] fbcon: radeondrmfb (fb0) is primary device
    [Mon Jul 7 22:52:57 2014] Console: switching to colour frame buffer device 240x75
    [Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: registered panic notifier
    [Mon Jul 7 22:52:57 2014] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 0
    [Mon Jul 7 22:53:18 2014] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [Mon Jul 7 22:53:18 2014] scsi 1:0:0:0: CDB:
    [Mon Jul 7 22:53:18 2014] cdb[0]=0x12: 12 00 00 00 60 00
    [Mon Jul 7 22:53:18 2014] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 2 dma 96 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [Mon Jul 7 22:53:18 2014] ata2.00: status: { DRDY }
    [Mon Jul 7 22:53:23 2014] ata2: link is slow to respond, please be patient (ready=0)
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] 62500000 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write Protect is off
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [Mon Jul 7 22:53:27 2014] sda: sda1 sda2 sda3 sda4
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Attached SCSI disk
    [Mon Jul 7 22:53:28 2014] ata2: device not ready (errno=-16), forcing hardreset
    [Mon Jul 7 22:53:28 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:28 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:28 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:28 2014] ata2.00: limiting speed to UDMA/33:PIO3
    [Mon Jul 7 22:53:33 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:33 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:33 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:33 2014] ata2.00: disabled
    [Mon Jul 7 22:53:38 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:38 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
    [Mon Jul 7 22:53:38 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:38 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:38 2014] ata2.00: limiting speed to UDMA/33:PIO3
    [Mon Jul 7 22:53:43 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:44 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:44 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:44 2014] ata2.00: disabled
    [Mon Jul 7 22:53:44 2014] ata2: EH complete
    [Mon Jul 7 22:53:44 2014] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
    [Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): re-mounted. Opts: data=ordered
    [Mon Jul 7 22:53:44 2014] systemd-udevd[150]: starting version 214
    [Mon Jul 7 22:53:44 2014] ACPI: acpi_idle registered with cpuidle
    [Mon Jul 7 22:53:44 2014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [Mon Jul 7 22:53:44 2014] ACPI: Battery Slot [BAT0] (battery present)
    [Mon Jul 7 22:53:44 2014] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    [Mon Jul 7 22:53:44 2014] ACPI: AC Adapter [AC] (on-line)
    [Mon Jul 7 22:53:44 2014] acpi device:2d: registered as cooling_device2
    [Mon Jul 7 22:53:44 2014] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2a/LNXVIDEO:00/input/input2
    [Mon Jul 7 22:53:44 2014] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
    [Mon Jul 7 22:53:44 2014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [Mon Jul 7 22:53:44 2014] ACPI: Lid Switch [LID]
    [Mon Jul 7 22:53:44 2014] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [Mon Jul 7 22:53:44 2014] ACPI: Power Button [PBTN]
    [Mon Jul 7 22:53:44 2014] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
    [Mon Jul 7 22:53:44 2014] ACPI: Sleep Button [SBTN]
    [Mon Jul 7 22:53:44 2014] wmi: Mapper loaded
    [Mon Jul 7 22:53:44 2014] thermal LNXTHERM:00: registered as thermal_zone0
    [Mon Jul 7 22:53:44 2014] ACPI: Thermal Zone [THM] (25 C)
    [Mon Jul 7 22:53:44 2014] intel_rng: FWH not detected
    [Mon Jul 7 22:53:44 2014] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [Mon Jul 7 22:53:44 2014] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [Mon Jul 7 22:53:44 2014] leds_ss4200: no LED devices found
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: autoconfig: line_outs=3 (0xf/0xe/0x11/0x0/0x0) type:speaker
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: mono: mono_out=0x0
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: dig-out=0x9/0x0
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: inputs:
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: Mic=0x10
    [Mon Jul 7 22:53:44 2014] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
    [Mon Jul 7 22:53:44 2014] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
    [Mon Jul 7 22:53:44 2014] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [Mon Jul 7 22:53:44 2014] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [Mon Jul 7 22:53:44 2014] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [Mon Jul 7 22:53:44 2014] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [Mon Jul 7 22:53:44 2014] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
    [Mon Jul 7 22:53:44 2014] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
    [Mon Jul 7 22:53:44 2014] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
    [Mon Jul 7 22:53:44 2014] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
    [Mon Jul 7 22:53:44 2014] kvm: disabled by bios
    [Mon Jul 7 22:53:44 2014] input: Dell WMI hotkeys as /devices/virtual/input/input9
    [Mon Jul 7 22:53:44 2014] iTCO_vendor_support: vendor-support=0
    [Mon Jul 7 22:53:44 2014] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [Mon Jul 7 22:53:44 2014] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
    [Mon Jul 7 22:53:44 2014] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [Mon Jul 7 22:53:44 2014] gpio_ich: GPIO from 206 to 255 on gpio_ich
    [Mon Jul 7 22:53:44 2014] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
    [Mon Jul 7 22:53:44 2014] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
    [Mon Jul 7 22:53:44 2014] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:15:c5:4b:f3:24
    [Mon Jul 7 22:53:45 2014] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
    [Mon Jul 7 22:53:45 2014] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
    [Mon Jul 7 22:53:45 2014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [Mon Jul 7 22:53:45 2014] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 128333
    [Mon Jul 7 22:53:45 2014] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [Mon Jul 7 22:53:45 2014] mousedev: PS/2 mouse device common for all mice
    [Mon Jul 7 22:53:46 2014] random: nonblocking pool is initialized
    [Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
    [Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
    [Mon Jul 7 22:53:48 2014] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [Mon Jul 7 23:11:28 2014] b44 ssb0:0 eth0: Link is down
    [Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
    [Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
    [Mon Jul 7 23:12:54 2014] PM: Syncing filesystems ... done.
    [Mon Jul 7 23:12:54 2014] PM: Preparing system for mem sleep
    [Mon Jul 7 23:12:55 2014] Freezing user space processes ... (elapsed 0.047 seconds) done.
    [Mon Jul 7 23:12:55 2014] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
    [Mon Jul 7 23:12:55 2014] PM: Entering mem sleep
    [Mon Jul 7 23:12:55 2014] Suspending console(s) (use no_console_suspend to debug)
    [Mon Jul 7 23:12:55 2014] b44 ssb0:0 eth0: powering down PHY
    [Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Stopping disk
    [Mon Jul 7 23:12:55 2014] PM: suspend of devices complete after 393.015 msecs
    [Mon Jul 7 23:12:55 2014] PM: late suspend of devices complete after 0.713 msecs
    [Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] PM: noirq suspend of devices complete after 15.766 msecs
    [Mon Jul 7 23:12:55 2014] ACPI: Preparing to enter system sleep state S3
    [Mon Jul 7 23:12:55 2014] PM: Saving platform NVS memory
    [Mon Jul 7 23:12:55 2014] Disabling non-boot CPUs ...
    [Mon Jul 7 23:12:55 2014] smpboot: CPU 1 is now offline
    [Mon Jul 7 23:12:55 2014] ACPI: Low-level resume complete
    [Mon Jul 7 23:12:55 2014] PM: Restoring platform NVS memory
    [Mon Jul 7 23:12:55 2014] Enabling non-boot CPUs ...
    [Mon Jul 7 23:12:55 2014] x86: Booting SMP configuration:
    [Mon Jul 7 23:12:55 2014] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [Mon Jul 7 23:12:55 2014] CPU1 is up
    [Mon Jul 7 23:12:55 2014] ACPI: Waking up from system sleep state S3
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
    [Mon Jul 7 23:12

    I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
    I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
    The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
    IdleActionSec=9min
    IdleAction=suspend
    Will check it and report back.

  • Cant find i i life after installing it and iphoto has stopped working

    cant find i i life after installing it and iphoto has stopped working

    If it is a new Mac then iLife came preinstalled on it
    As to searching for iLife - it is not an application - it is a suite of five applications - iPhoto - iMovie - IDVD - iWeb - Garage Band  --  http://store.apple.com/us/product/MC623Z/A/iLife-11?fnode=NDQ5MDg0MA&mco=MjA4Nzk 4OTQ
    Do you have these five applications in your applications folder?
    what happens when you launch them?
    LN

  • Cascading prompts are not working after UNX conversion.

    Hi,
    We have converted universe to UNX format, but after conversion the cascading prompts are not working. Following is the one of the example of the cascading prompt which is having issue:
    We have cascading object named u201CGroup - Deviceu201D as below:
    CONCAT(CONCAT(@select(Performance Management\Group\Group Name),' - '),@select(Performance Management\Device\Device Name))
    In the SQL Assistance windows, validate button properly validates this object.
    Based on the above object, we have filter named u201CEnter/Select Group u2013 Deviceu201D with following definition:
    @select(Performance Management\Performance Reporting Objects\Performance Custom Dimensions\Group - Device) In  @prompt('Enter/Select Device Names','A','Performance Management\Performance Reporting Objects\Performance Custom Dimensions\Group - Device',Multi,Free,Not_Persistent)
    When I click on the validate button for this filter, it doesnu2019t says whether the expression invalid or valid. It does not return anything. I checked the error log windows of IDT and it shows below error once we validate the above filter:
    Message: Unhandled event loop exception
    java.util.ConcurrentModificationException
         at java.util.AbstractList$Itr.checkForComodification(AbstractList.java:372)
         at java.util.AbstractList$Itr.next(AbstractList.java:343)
         at com.businessobjects.semanticlayer.qt.internal.ParseExpressionServiceImpl.getScriptWithAnswers(ParseExpressionServiceImpl.java:753)
         at com.businessobjects.semanticlayer.qt.internal.ParseExpressionServiceImpl.getGeneratedScript(ParseExpressionServiceImpl.java:695)
         at com.businessobjects.semanticlayer.qt.internal.ParseExpressionServiceImpl.getGeneratedScript(ParseExpressionServiceImpl.java:673)
         at com.businessobjects.semanticlayer.qt.internal.ParseExpressionServiceImpl.getObjectSQLCombinations(ParseExpressionServiceImpl.java:369)
         at com.businessobjects.semanticlayer.qt.internal.ParseExpressionServiceImpl.getWhereParseSQL(ParseExpressionServiceImpl.java:298)
         at com.businessobjects.bimodeler.universe.panes.properties.ExpressionParserSQLBindings.parseExpression(ExpressionParserSQLBindings.java:58)
         at com.businessobjects.bimodeler.shared.dialogs.expression.ExpressionEditorComposite$7.widgetSelected(ExpressionEditorComposite.java:330)
    This problem is for all the cascading prompts, and only single level prompts are working after conversion to UNX.
    Can anyone please help on this? Am I missing any manual changes which are mandatory after UNX conversion for this to work.
    Thanks,
    Nilesh

    Hi Henry,
    Thanks for your reply. Yes I have raised SAP ticket for this.
    We are at BI 4.0 SP2 Patch 12.
    This problem is for all the cascading prompts which created using objects which are having u201CLOV based on Query Panelu201D, it doesnu2019t return the results, when I edit the LOV > edit the query and then click refresh to see the data, the refresh button does not appear.
    So I tried creating u201CLOV based on a custom hierarchyu201D as indicated in SAP note u2013 1666504 but it also doesnu2019t work. I used the object (that uses the LOV based on a custom hierarchy) to create the new cascading prompt, when I used this prompt in WEBI report, it only displays prompts for first value and not the second based on first input.
    I searched SAP KB and found this note u2013 u201C1620378 - Cascading (nested) prompts are not working for Web Intelligence reports in BI 4u201D which describes bug related to cascading prompts in unv as well as unx. But I am not sure if itu2019s the same which I am getting.
    Thanks,
    Nilesh

  • Wrong text in ADRC and LFA1 table after Unicode conversion

    Hello,
    We are doing MDMP to Unicode on SAP 4.7 system.
    In post unicode activities,we had corrected the garbage characters in
    table ADRC
    by converting to target langauage ZH using SUMG t-code.
    Condition used for addind table ADRC in SUMG is LANGU ='1' and
    LANGU_CREA = 'EN'
    But after converting and saving the data,most of the records have
    incorrect character in word.
    and text field of search term/company name/city in table LFA1 are also
    wrong in correspond field in table ADRC.
    Thanks
    Harshavardhan

    Hi Harshavardhan,
    Assumption: You have Chinese entries in table ADRC with ADRC-LANGU_CREA = EN
    Now you have to distinguish two problems:
    1) Chinese texts are stored in ADRC fields, which are NOT used for search help texts (most of the fields - e.g. ADRC-NAME1):
    These texts can be handled in two ways:
    a) Change LANGU_CREA = EN to LANGU_CREA = ZH for these entries (e.g. where ADRC-COUNTRY = CN) before the Unicode conversion (by the way, I would not use ADRC-LANGU, since this is the communication language, which does not necessarily comply with the code page of the entry).
    This needs to be done in a similar way as shown in z-reports described in  SAP Note 634839 ( although this specific fool-the-system case is not covered there - you have to adapt those examples)
    b) Use SUMG to repair the entries using language ZH (as you already did)  
    My favourite would be a), as this can be done before the conversion (Note that SUMG ineeds to be executed during downtime !)
    2) Chinese texts are stored in ADRC fields, which are used for search help texts (e.g. ADRC-MC_NAME1):
    a) If these entries were inserted / changed with logon language ZH, then point 1) applies
    b) If users logged on with logon language EN and created the entries, then most of these texts are destroyed already in Non-Unicode system. Then there is no automatic repair possible (at least point 1 does not work). Here my statement from before is valid:
    Those entries need to be generated again - e.g. if you do a dummy change on the name.
    According to my knowledge, this is a manual effort (either before or after the conversion) - but maybe it can be automized ...
    Best regards,
    Nils Buerckel
    SAP AG

  • Corrupted Number Ranges After Unicode Conversion

    Hello Gurus,
    Has anyone had corrpted number ranges after UC conversion
    After a Unicode conversion the number ranges are no longer valid?
    We are doing a Unicode conversion from Informix to DB6 unicode on AIX.
    Kind Regards
    Lawrence Brown

    Hi Lawrence,
    I never heard from any Unicode conversion customer that number ranges did not work anymore after the Unicode conversion. Maybe the DB migration plays a role here ?
    Best regards,
    Nils Buerckel
    SAP AG

  • After unicode conversion Variant missing

    Dear All,
    After unicode conversion in transaction S_ALR_87013611 and
    S_ALR_87013613 variant is missing.
    We checked in table VARIT - "Variant Texts" data is missing.
    Kindly suggest.
    Thanks and regards,
    Joseph

    Hello
    Did you discover the reason for this? We are now facing the same issue and we cannot find the reason.
    I don't think that note 987914 can be the answer.
    Can it be something connected to the procedure for conversion or caused by a wrong-executed step?
    Every suggestion can help,
    Thanks
    Luca

  • Making ABAP sources Unicode compliant ... after Unicode conversion

    Hi,
    I was asked by a customer if there is any problem with the following scenario :
    A system must be converted to unicode. Unfortunately, not all the ABAP source codes will be unicode enabled on-time for the conversion.
    The development team wanted to know if they can assign priorities to ABAPs and focus their manpower on these ABAPs only.
    The rest of the ABAPs will be made unicode compliant AFTER the conversion of the system.
    I am well aware that if ABAPs don't have the Unicode flag checked, the system won't allow their execution but will it still be possible to edit the source code of those non unicode ABAPs and enable them afterwards ? From a technical point of view, I can't find any reason why it shouldn't be possible but who knows ...
    Thanks for your answers,

    Hi,
    Yes during upgade the unicode check comes into picture..
    The first unicode version is 4.7,so from 4.7 to higher versions unicode is thre...below 4.7 say 4.c is non unicode .
    one example is u can dclare a variable of type X in non-unicode system(4.6c) but not possible in unicode system(ECC6.0).
    Check the below links for understanding of unicode.
    [UCCHECK downporting;
    [UCCHECK;
    [http://www.sap.com/korea/Company/Events/techday05/img/data_01.pdf]
    [http://www.sap-press.de/download/dateien/1240/sappress_unicode_in_sap_systems.pdf]
    [Re: ECC 6.0 Upgrade & changes required in programs;

  • Job logs from the original system after Unicode conversion.

    Dear Globalization experts,
    We are doing Unicode conversion and would like to know, if the Job logs from the batch jobs, executed before conversion (system with a 1100 code page), would be readable  in the Unicode system after the conversion.  We will move job log files from the source to the target  system. I .  Thank you in advance for your help.
    Best regards,
    Alik Shapiro

    Hi Alik,
    I have strong doubts that this will work ...
    From SAP notes 842767 and 901004 you can see, that spool data will not be converted properly by default.
    In general this is valid for data stored in TemSe, as this is by definition temporary data (see for example http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/content.htm ).
    However I actually did not test it, so I am not 100% sure.
    Best regards,
    Nils Buerckel
    SAP AG

  • I Have been getting BAD battery life after the ICS UPDATE !! on the DROID RAZAR MAXX have this happen to any one else ??????

    i have been getting really bad battery life after install ICS on my droid razar maxx i can only go 1 day and 3 hours where i used to be able to go 2 day easy have this happen to anyone else can someone tell me how i can make my battery life better??????/ and do i need to let my phone go complete dead before fully chargeing it again ??????
    before install the ICS update i had 30 percent of battery life remaining so i pluged it in and let charged for a little bit while it updated my phone and ever thing after it updated i unplug my phone and started playing on my phone to see what ICS was all about but when it got to 15 and said " connect to your changer so i did !!!!! should i haved let my phone going complete dead since i unplug without it fully changer or does it matter ?????????????? if someone could please help me !!!!:)

    What was your battery reading right after the update when you unplugged the phone? I have never let my Maxx drain further than 20% battery ever before I charge it. Yesterday after the update I also played more with the phone trying to learn the OS, as did most everyone on this forum. Give it a few days of your normal use before you decide your battery life has decreased. I took my phone off charger today at noon, it was 100%, and now it's 80%, with about 30 min talk time, and mostly standby. that's about normal batt life for me, maybe a little better than before the update. I'm still going to watch it for a few days before I make a conclusion about battery life.

  • Wireless driver triggers warm/hot macbook and low battery life after OS 10.8 mountain lion upgrade

    Hello frustrated Macbook users.
    I have tried to get help on other Apple discussions but no one seems to want to help, they aren't actually reading my posts, or they hate me for some reason. 
    No matter.
    If you have a warm Macbook that has 2.5 hours of battery life where you used to have 4 or more, please do this simple procedure and write the result below.
    Turn OFF Airport wireless networking
    Perform an SMC reset (Power Manager)
    Connect an ethernet cable and use your Macbook normally. (but do NOT turn on wireless networking again)
    How is your battery life after doing this?
    I have a user over here who reclaimed decent battery performance if he doesn't use his Airport wireless.
    I need confirmation.
    If so, I may get a USB wireless adapter and see if the battery life stays good.
    Bonus points:  If you have a Mac compatible USB wireless adapter and got good results by turning off the built-in adapter, want to test it for me and report the results?
    Thanks and good luck!
    meta:  short time install snow leopard hours overheating shorter shortened lower

    UPDATE:
    Problem persists when using Recovery Partition.
    Chance sthat it is third party softwae or updates is more or less eliminated.
    Update 10.8.3 beta fixed the problem for one lucky early adopter.
    Hypothesis: New battery charging algorithms programmed into Mountain Lion OS10.8 triggered problems from design flaws that were NOT an issue for OS 10.7 and before.
    Battery replacements were successful where the replacement battery was built within tolerances that did not fail under 10.8's new charging algorithms. Other bateries did not meet those tolerances so you would get spotty results from battery replacements.  It worked sometimes, but not always.
    OS 10.8.3 may have adjusted these algorithms to be less demanding on the features of the battery that were failing.
    Official word from Apple is 'mum'.

  • How can i maximize my battery life after its been damaged

    how can i maximize my battery life after its been damaged?

    Just like it had nevr been damaged; fully dischagre and charge monthly, minimize battery drain so you minimize charge/dischare cycles.

  • Battery 79% life after 72 recharge cycles and Amperage -1356

    Hi to all, this is my story, I've bought a macbook pro 15'' on November 2007 and in about 4 months battery was at 50% of life after 92 recharge cycles, after one year from purchase, apple store has changed battery, megasafe and the connector on the macbook, now the situation isn't changed and I have a battery, like in object, with 79% of life after 72 recharge cycles and the Amperage in the information window is (-1356) very strange!!! Why there's a negative amperage? and why my battery works so bad? I always charge the battery when is completely discharged and when i do this the macbook is off, sometimes I use macbook with megasafe connected but in this situation I remove the battery. Can i have a new battery from apple in free substitution?

    Hi alby_mo and welcome to the forums.
    The amperage figure you mention will ALWAYS be negative when running from the battery and be positive when the battery is actually charging.
    Your battery life is not uncommon, (many people only get about 18 months life out of these batteries, I'm afraid) but you are going about the charging process all wrong!
    You should avoid completely discharging Lithium batteries as much as possible, and use them regularly and lightly if possible. Discharging them completely all the time reduces their lives substantially. THis used to be a good idea in the past with NiCad batteries that would develop a "memory" problem otherwise, but it is not so with Lithium batteries.
    The only time that you really need to completely discharge your MacBook Pro battery is when you "calibrate" it, which you should do every month or two. See http://support.apple.com/kb/HT1490 for instructions.
    See http://discussions.apple.com/thread.jspa?threadID=1764220 for a good FAQ with information about how to look after your battery, together with Apple's own comments at http://www.apple.com/batteries/notebooks.ht
    You should stop running the computer without a battery installed, too, for the reasons set out at http://support.apple.com/kb/HT2332. It has little effect on the battery because charging is disabled once the battery reaches 100% and doesn't start again until it has dropped to the mid 90's. Better , instead, to get into the habit of running the computer on battery for an hour or so each day, and just leaving it on the charger the rest of the time, whether you are using it or not.
    The "health" of your battery seems to reduce when the charge gets low because dying Lithium batteries build up increasing internal resistance, which becomes more apparent as the voltage drops.
    You can ask Apple service in Italy (or an AASP) about a free replacement, but I wouldn't get your hopes up. Many people with 2007 MBps are already on their second and third batteries, and Apple generally will only replace them during the warranty period. Some people seem to get lucky, though, and you can't lose anything by asking!
    Cheers
    Rod

  • Firewire 800 Port back to life after power shutdown?

    I experienced a strange event and would like to share it with you for feedback and comments.
    During several days the external hard disk connected to the Firewire 800 port of my IMAC caused me increasingly problems, and eventually the disk would not mount at all on the desktop. I connected the disk to the FW800 port of my portable and the disk worked quite fine. I concluded that the FW800 port of the IMAC was damaged. I was preparing myself to contact Apple to get the IMAC repaired.
    Then recently we had a general shutdown of power in our town, for several hours.
    When the power came back, I had the idea to reconnect the external disk to the FW800 port, and miracle, the disk mounted immediately and has been working fine since.
    Is is possible that the ports of the computer come back to life after a power shutdown? How is this possible?
    Can I conclude that it is recommended to disconnect a computer from time to time, just to reset some parameters?

    Yep, both USB and Firewire ports can get in into a "bad state" and only complete removal of power will reset those chip sets.
    Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes powering the ports to do stuff like detect when a device is plugged in or wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, locks up, etc., simply power cycling (shutdown & restart) the computer won't work.
    So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac). Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chipset alive. Now let it sit for a minute (give those big power caps in there time to discharge). Now plug stuff back in & start up the Mac. Now see if your USB or Firewire ports work any better.
    Even Apple acknowledges this occasional issue...
    What to do if your computer won't recognize a FireWire or USB device
    http://support.apple.com/kb/HT1317?viewlocale=en_US
    Best of luck!
    Patrick

  • HT201365 Hello . I have an iphone for which is currently IOS 7 updated. I have had some trouble with its batery life after IOS 7 update. I advised from the phone shop that I need to give it a factory restart and I made it. Now i have icloud activation loc

    Hello . I have an iphone for which is currently IOS 7 updated. I have had some trouble with its batery life after IOS 7 update. I advised from the phone shop that I need to give it a factory restart and I made it. Now i have icloud activation lock and I have no idea when I create an icloud account. I donr remember any related email or password. I am completely losttt
    Any help guys ? ( I am currently stuck with Nokia 2210

    Welcome to the Apple community.
    Unfortunately, unless you know the Apple ID, there is absolutely nothing that can be done, you cannot use your mobile device. You may be able to find your Apple ID at Look up your old and forgotten Apple ID

Maybe you are looking for