Life after InfoPath - seeking advice

So we currently have a SP2010 environment where we have made extensive use of InfoPath forms. Some basic, some are centrally published with lots of code. Our new Director is hot on SharePoint Online and wants us to investigate moving to the cloud. Hoping
to get some direction/advice here.
If we were to ignore that InfoPath is going away, and keep using it while we can, forms with code cannot be published to SharePoint online, right?
If we decide to do everything in aspx, will our devs who have worked primarily in InfoPath need to ramp up on asp.net, html, css, javascript, all without the benefit of a visual editor?
Can we use asp.net technologies like webforms or mvc in SharePoint 2013 Apps?
Am I missing other options?
Thanks

First piece of advice.  Don't panic.  InfoPath is guaranteed to be around for the next 10 years.  At this point Microsoft is working on several alternative products and until they announce the completion of the alternatives its too early to
stop using InfoPath if you have been using it.  The alternatives aren't ready yet. The answers to your other questions below:
If we were to ignore that InfoPath is going away, and keep using it while we can, forms with code cannot be published to SharePoint online, right?  - Correct, no code behinds for forms in SharePoint Online
If we decide to do everything in aspx, will our devs who have worked primarily in InfoPath need to ramp up on asp.net, html, css, javascript, all without the benefit of a visual editor? - For 2013 I think that is a fair statement.  If they use
Visual studio there is the ability to do a Visual Web part, which includes a visual editor, but I think you get a better result without it.
Can we use asp.net technologies like webforms or mvc in SharePoint 2013 Apps?
Yes.  Its just that Apps are basically going to be limited to client side code like javascript and won't be able to use server side code like C# code behinds (except for provider hosted apps which don't run on the SharePoint server so they can't use SharePoint
server API anyway.)
Hope that helps
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

  • Seeking advice on SAP/cloud

    Hello all,
    Will be doing proof-of-concept on SAP on cloud, installing ERP and seeking advice/feedback.
    Based on the criteria of easier installation and faster delivery (and of course success story), what will be the recommended combination of platform (LINUX, Windows) and database (Oracle, MS SQL, MAXDB, DB2).
    Thanks in advance.
    Regards,
    Terry

    There are lots of  documents in SDN and other forums which will give much better idea ... but these are my observation
    Installation - Once you have gone past the access process to the cloud environment, after that you can hardly differentiate whether you are on doing a install on cloud or non-cloud. Though definately the time to get the infrastructure for install is much faster.
    Windows or Linux - I would put it as windows or Unix, not sure how many providers offer other flavors of Unix apart from Linux. But obviously the Product itself to some extent will govern what you choose, as has been the case in non-cloud env.
    Database - Again have seen Oracle and DB2 being mostly used. Not sure why, may be stuff like doing system refresh in 15 min ,  etc  are easier to achieve with products like Oracle and DB2.
    Regards,
    Neel
    I dont have any exposure to windows on cloud. So i am not aware of specific positives it might have in cloud.
    Edited by: Neelabha Banerjee on Nov 22, 2011 3:40 PM

  • Seeking advice on moving up to HDV editing

    I appreciate folks on this forum who have assisted me in the past when I’ve had questions about iMovie, editing, burning DVDs etc. Karsten, Lennart, Bengt and others from around the world have been very kind and helpful. I am now seeking advice from anyone regarding “moving up” to the HDV world of video editing.
    I recently "retired" my 2003 iMac G4 800 MHz flat screen and replaced it with an iMac 2.8 GHz Intel core 2 duo with a 320 GB hardrive and 4 GB of upgraded RAM. I have a 250 GB external drive as well. I also replaced my old Sony TRV-30 digital camcorder (a great old workhorse which is still going strong after 8 years) with a Canon Vixia HV40 that has high definition recording capability (uses mini DV tape).
    I had been using iMovie HD 06 to edit my video projects along with iDVD and Toast 6 to burn them to DVD. I would like to start shooting HDV video with the new Canon, edit and burn the projects to Blu Ray high definition discs. MCE Technologies (among others, I believe) offer both internal and external Blu Ray burners. I don’t believe that the internal Blu Ray burner would work in my new iMac, but I may be wrong on that. (Does anyone know the answer?)
    I believe that the MCE external Blu Ray burner would work with my equipment if attached to one of the Firewire ports or possibly through one of the USB 2 ports. (there is both a 400 and 800 Firewire port on this iMac model.) I was planning to acquire Final Cut Express as the editing program with Toast 10 Pro (plus the Blu Ray plug in) to burn the edited projects.
    Will this work? Is there anything I should know before I plunge “headlong” into HDV editing? Any advice would be most welcome. Thanks in advance.
    Message was edited by: scooper

    scooper wrote:
    .. iMac 2.8 GHz Intel core 2 duo with a 320 GB hardrive and 4 GB of upgraded RAM. I have a 250 GB external drive .. Canon Vixia HV40 .. external Blu Ray burner .. Final Cut Express .. Toast 10 Pro (plus the Blu Ray plug in)
    Will this work?
    I'm jealous.. wow! MY set-up..
    HDV is supported by IMHD6.. just to mention that. so, HDV-editing is same as SD..
    iMHD6 Export 'FullQuality' creates a file, which is HiDef too, for your Toast/BR workflow ..
    HDV creates on import (IMHD6/FCE) huuuuuge files, 40-60GBs/h .. 250 extHDD = 6h, full..
    actual price for extHDD with 1TB <100€ ..
    keep in mind: internal harddrive has to offer any time 10-20GBs free..
    not every BR-standalone-player accepts homebrewn disks..don't be disappointed...
    Toast and iDVD can burn DVDs (=which offer SD only) from HiDef projects.. no need to 'convert'.. both apps downsize automatically...
    FCE has a (very) steem learning curve.. totally different to iMovie.. no one-click-only, no templates, no ready-mades.. but zillions of options, 101% control.. (simple example: ken burns with zoom-to-zil and rotation and moving out of frame...)
    buy a book of FC Mastermind and AppleDiscussions-Level5 supporter *Tom Wolsky* - he's a sensei, in-depth-knowledge, hands-on (=no tech blabla), easy to read and understand.
    don't start with a project, start with 'tests for the trashbin'..

  • HT4623 hello team i m not finding the contact numbers back up in my computer after sync please advice

    hello team
    i am not finding the contact numbers in my computer after sync please advice me what is wrong
    my mobile EMI NO 01 202600 303635 8

    PhotogYogi wrote:
    I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
    By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
    Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

  • Console does not comes back to life after screen blanking

    edited post on 2014-07-13:
    This problem has nothing to do with suspend-to-RAM and/or suspend-to-disk (hibernate).
    It is a screen blanking on the console triggered by a timeout in the kernel.
    It can be modified (or disabled) with the setterm command for the current session.
    The issue is still unresolved since the console doesn't comes back to life after hitting a key.
    See post#6 on 2014-07-13 for further details.
    Changed title accordingly.
    original post on 2014-07-09 titled "blank screen on resume after suspend but screen OK after hibernation" follows:
    Dell Inspiron 9400 (aka E1705) with Radeon X1400 (RV515) (confirmed by dmesg: loading R500 microcode)
    - arch x86_64 fully updated up to 07-JULY-2014
    - xf86-video-ati open source driver installed
    - no (additional; ie: explicitly) installed power management packages such as pm-utils
    - no X installed
    The problem:
    • hibernation works fine; ie: by closing (and waiting a few seconds) and re-opening the lid
    • however resume after suspend isn't working; ie: by pressing any key to resume ... it seems the screen never comes back to life
    After suspend activates (and after I hit a key to activate resume) I see no activity at all (blank screen) but ... if I type some commands (eg: timedatectl etc) and then I close the lid to activate the hibernation sequence re-opening the lid (say, a minute later) the machine comes back from hibernation as expected and I can see the commands (and output) I typed when the screen was blank so ... it seems to me either:
    • the backlight state is not restored on the resume sequence (first thought)
    • the machine shuts down the screen after (a 10 minute) timeout but never activates the suspend sequence (and will never activate resume then) (second thought while reading dmesg output)
    This problem was present on this laptop since my first (and subsequent) arch installations so it seems is not kernel/driver specific since I did many pacman --sysupgrades in between while learning arch.
    The testing sequence (with related entries on included dmesg output):
    - typed timedatectl ... showing 23.29.04
    - now allowing idle time for the machine to suspend
    - suspend starts at 23.39 (ie: after 10 minutes) ... tag it as event1#1
    - after 30 seconds resuming with the space key and after a few seconds typing (blindly) timedatectl ... tag it as event1#2
    - after 60 seconds closing the lid allowing time for hibernation ... tag it as event2#1
    - after 30 seconds opening the lid ... tag it as event2#2
    - now I can see the output for timedatectl (typed blindly on event1#2) and it shows 23.40.11
    As you can see in attached dmesg output (at the bottom of this post) there are (to me) no evident entries for event1#2 (resuming after suspend):
    ... event#1-1 ... suspend starts here:
    [Mon Jul 7 23:40:12 2014] perf interrupt took too long (2504 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
    ... event#1-2 ... resume from suspend should show some entries here:
    no entries at all
    And the next entry after entering the suspend sequence is the starting of the hibernation sequence (when closing the lid):
    ... event#2-1 ... hibernation starts here:
    [Mon Jul 7 23:41:30 2014] PM: Syncing filesystems ... done.
    [Mon Jul 7 23:41:30 2014] smpboot: CPU 1 is now offline
    ... event#2-2 ... coming back from hibernation (I think) starts here:
    [Mon Jul 7 23:41:30 2014] ACPI: Low-level resume complete
    [Mon Jul 7 23:41:31 2014] Restarting tasks ... done.
    [Mon Jul 7 23:41:31 2014] video LNXVIDEO:00: Restoring backlight state
    So the machine shuts off the screen (and/or backlight) but never enters suspend mode because "restoring backlight state" appears once and should appear twice in my testing.
    Why isn't working then ?
    Because the signal to enter suspend mode is never sent/received by the OS ?
    Which brings me to a key question: is the acpi package (which it is not installed) (or something like that) required for such signaling ?
    In the following post a user claims a similar problem but he can see some activity (after resuming from suspend) by directing a bright light to the screen so the problem there seems to be the backlight not powered up again: it is not my case, when I did the same I saw no activity at all.
    https://bbs.archlinux.org/viewtopic.php?id=183580
    Following is full dmesg output (edited with a couple of lines inserted to keep track of mentioned events):
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuset
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpu
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuacct
    [Mon Jul 7 22:52:56 2014] Linux version 3.15.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jul 1 07:32:45 CEST 2014
    [Mon Jul 7 22:52:56 2014] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
    [Mon Jul 7 22:52:56 2014] e820: BIOS-provided physical RAM map:
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000100000-0x000000007fed33ff] usable
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000007fed3400-0x000000007fffffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f0000000-0x00000000f4006fff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f4008000-0x00000000f400bfff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
    [Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [Mon Jul 7 22:52:56 2014] NX (Execute Disable) protection: active
    [Mon Jul 7 22:52:56 2014] SMBIOS 2.4 present.
    [Mon Jul 7 22:52:56 2014] DMI: Dell Inc. MP061 /0YD479, BIOS A10 08/26/2009
    [Mon Jul 7 22:52:56 2014] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [Mon Jul 7 22:52:56 2014] e820: remove [mem 0x000a0000-0x000fffff] usable
    [Mon Jul 7 22:52:56 2014] No AGP bridge found
    [Mon Jul 7 22:52:56 2014] e820: last_pfn = 0x7fed3 max_arch_pfn = 0x400000000
    [Mon Jul 7 22:52:56 2014] MTRR default type: uncachable
    [Mon Jul 7 22:52:56 2014] MTRR fixed ranges enabled:
    [Mon Jul 7 22:52:56 2014] 00000-9FFFF write-back
    [Mon Jul 7 22:52:56 2014] A0000-BFFFF uncachable
    [Mon Jul 7 22:52:56 2014] C0000-CFFFF write-protect
    [Mon Jul 7 22:52:56 2014] D0000-EFFFF uncachable
    [Mon Jul 7 22:52:56 2014] F0000-FFFFF write-protect
    [Mon Jul 7 22:52:56 2014] MTRR variable ranges enabled:
    [Mon Jul 7 22:52:56 2014] 0 base 000000000 mask F80000000 write-back
    [Mon Jul 7 22:52:56 2014] 1 base 07FF00000 mask FFFF00000 uncachable
    [Mon Jul 7 22:52:56 2014] 2 disabled
    [Mon Jul 7 22:52:56 2014] 3 disabled
    [Mon Jul 7 22:52:56 2014] 4 disabled
    [Mon Jul 7 22:52:56 2014] 5 disabled
    [Mon Jul 7 22:52:56 2014] 6 disabled
    [Mon Jul 7 22:52:56 2014] 7 disabled
    [Mon Jul 7 22:52:56 2014] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [Mon Jul 7 22:52:56 2014] Scanning 1 areas for low memory corruption
    [Mon Jul 7 22:52:56 2014] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x00000000-0x000fffff] page 4k
    [Mon Jul 7 22:52:56 2014] BRK [0x01b3e000, 0x01b3efff] PGTABLE
    [Mon Jul 7 22:52:56 2014] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [Mon Jul 7 22:52:56 2014] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x7fc00000-0x7fdfffff] page 2M
    [Mon Jul 7 22:52:56 2014] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x7c000000-0x7fbfffff] page 2M
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00100000-0x7bffffff]
    [Mon Jul 7 22:52:56 2014] [mem 0x00100000-0x001fffff] page 4k
    [Mon Jul 7 22:52:56 2014] [mem 0x00200000-0x7bffffff] page 2M
    [Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fe00000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] [mem 0x7fe00000-0x7fed2fff] page 4k
    [Mon Jul 7 22:52:56 2014] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [Mon Jul 7 22:52:56 2014] RAMDISK: [mem 0x3729a000-0x37944fff]
    [Mon Jul 7 22:52:56 2014] ACPI: RSDP 0x00000000000FC1B0 000014 (v00 DELL )
    [Mon Jul 7 22:52:56 2014] ACPI: RSDT 0x000000007FED39CD 000040 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: FACP 0x000000007FED4800 000074 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: DSDT 0x000000007FED5400 004841 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: FACS 0x000000007FEE3C00 000040
    [Mon Jul 7 22:52:56 2014] ACPI: HPET 0x000000007FED4F00 000038 (v01 DELL M07 00000001 ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: APIC 0x000000007FED5000 000068 (v01 DELL M07 27D9081A ASL 00000047)
    [Mon Jul 7 22:52:56 2014] ACPI: MCFG 0x000000007FED4FC0 00003E (v16 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: SLIC 0x000000007FED509C 000176 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: BOOT 0x000000007FED4BC0 000028 (v01 DELL M07 27D9081A ASL 00000061)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3A0D 0004DC (v01 PmRef CpuPm 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
    [Mon Jul 7 22:52:56 2014] No NUMA configuration found
    [Mon Jul 7 22:52:56 2014] Faking a node at [mem 0x0000000000000000-0x000000007fed2fff]
    [Mon Jul 7 22:52:56 2014] Initmem setup node 0 [mem 0x00000000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] NODE_DATA [mem 0x7fece000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
    [Mon Jul 7 22:52:56 2014] Zone ranges:
    [Mon Jul 7 22:52:56 2014] DMA [mem 0x00001000-0x00ffffff]
    [Mon Jul 7 22:52:56 2014] DMA32 [mem 0x01000000-0xffffffff]
    [Mon Jul 7 22:52:56 2014] Normal empty
    [Mon Jul 7 22:52:56 2014] Movable zone start for each node
    [Mon Jul 7 22:52:56 2014] Early memory node ranges
    [Mon Jul 7 22:52:56 2014] node 0: [mem 0x00001000-0x0009efff]
    [Mon Jul 7 22:52:56 2014] node 0: [mem 0x00100000-0x7fed2fff]
    [Mon Jul 7 22:52:56 2014] On node 0 totalpages: 523889
    [Mon Jul 7 22:52:56 2014] DMA zone: 64 pages used for memmap
    [Mon Jul 7 22:52:56 2014] DMA zone: 21 pages reserved
    [Mon Jul 7 22:52:56 2014] DMA zone: 3998 pages, LIFO batch:0
    [Mon Jul 7 22:52:56 2014] DMA32 zone: 8124 pages used for memmap
    [Mon Jul 7 22:52:56 2014] DMA32 zone: 519891 pages, LIFO batch:31
    [Mon Jul 7 22:52:56 2014] ACPI: PM-Timer IO Port: 0x1008
    [Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [Mon Jul 7 22:52:56 2014] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [Mon Jul 7 22:52:56 2014] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [Mon Jul 7 22:52:56 2014] ACPI: IRQ0 used by override.
    [Mon Jul 7 22:52:56 2014] ACPI: IRQ2 used by override.
    [Mon Jul 7 22:52:56 2014] ACPI: IRQ9 used by override.
    [Mon Jul 7 22:52:56 2014] Using ACPI (MADT) for SMP configuration information
    [Mon Jul 7 22:52:56 2014] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [Mon Jul 7 22:52:56 2014] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [Mon Jul 7 22:52:56 2014] nr_irqs_gsi: 40
    [Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
    [Mon Jul 7 22:52:56 2014] e820: [mem 0x80000000-0xefffffff] available for PCI devices
    [Mon Jul 7 22:52:56 2014] Booting paravirtualized kernel on bare hardware
    [Mon Jul 7 22:52:56 2014] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
    [Mon Jul 7 22:52:56 2014] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s87168 r8192 d23424 u1048576
    [Mon Jul 7 22:52:56 2014] pcpu-alloc: s87168 r8192 d23424 u1048576 alloc=1*2097152
    [Mon Jul 7 22:52:56 2014] pcpu-alloc: [0] 0 1
    [Mon Jul 7 22:52:56 2014] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515680
    [Mon Jul 7 22:52:56 2014] Policy zone: DMA32
    [Mon Jul 7 22:52:56 2014] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
    [Mon Jul 7 22:52:56 2014] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] Checking aperture...
    [Mon Jul 7 22:52:56 2014] No AGP bridge found
    [Mon Jul 7 22:52:56 2014] Calgary: detecting Calgary via BIOS EBDA area
    [Mon Jul 7 22:52:56 2014] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [Mon Jul 7 22:52:56 2014] Memory: 2043836K/2095556K available (5224K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 51720K reserved)
    [Mon Jul 7 22:52:56 2014] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [Mon Jul 7 22:52:56 2014] Preemptible hierarchical RCU implementation.
    [Mon Jul 7 22:52:56 2014] RCU dyntick-idle grace-period acceleration is enabled.
    [Mon Jul 7 22:52:56 2014] Dump stacks of tasks blocking RCU-preempt GP.
    [Mon Jul 7 22:52:56 2014] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    [Mon Jul 7 22:52:56 2014] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [Mon Jul 7 22:52:56 2014] NR_IRQS:8448 nr_irqs:512 16
    [Mon Jul 7 22:52:56 2014] Console: colour dummy device 80x25
    [Mon Jul 7 22:52:56 2014] console [tty0] enabled
    [Mon Jul 7 22:52:56 2014] allocated 8388608 bytes of page_cgroup
    [Mon Jul 7 22:52:56 2014] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [Mon Jul 7 22:52:56 2014] hpet clockevent registered
    [Mon Jul 7 22:52:56 2014] tsc: Fast TSC calibration using PIT
    [Mon Jul 7 22:52:56 2014] tsc: Detected 1997.384 MHz processor
    [Mon Jul 7 22:52:56 2014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3996.21 BogoMIPS (lpj=6657946)
    [Mon Jul 7 22:52:56 2014] pid_max: default: 32768 minimum: 301
    [Mon Jul 7 22:52:56 2014] ACPI: Core revision 20140214
    [Mon Jul 7 22:52:56 2014] ACPI: All ACPI Tables successfully acquired
    [Mon Jul 7 22:52:56 2014] Security Framework initialized
    [Mon Jul 7 22:52:56 2014] Yama: becoming mindful.
    [Mon Jul 7 22:52:56 2014] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [Mon Jul 7 22:52:56 2014] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [Mon Jul 7 22:52:56 2014] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys memory
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys devices
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys freezer
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys net_cls
    [Mon Jul 7 22:52:56 2014] Initializing cgroup subsys blkio
    [Mon Jul 7 22:52:56 2014] CPU: Physical Processor ID: 0
    [Mon Jul 7 22:52:56 2014] CPU: Processor Core ID: 0
    [Mon Jul 7 22:52:56 2014] mce: CPU supports 6 MCE banks
    [Mon Jul 7 22:52:56 2014] CPU0: Thermal monitoring enabled (TM2)
    [Mon Jul 7 22:52:56 2014] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
    tlb_flushall_shift: -1
    [Mon Jul 7 22:52:56 2014] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
    [Mon Jul 7 22:52:56 2014] ftrace: allocating 20226 entries in 80 pages
    [Mon Jul 7 22:52:56 2014] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [Mon Jul 7 22:52:56 2014] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (fam: 06, model: 0f, stepping: 06)
    [Mon Jul 7 22:52:56 2014] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
    [Mon Jul 7 22:52:56 2014] perf_event_intel: PEBS disabled due to CPU errata
    [Mon Jul 7 22:52:56 2014] ... version: 2
    [Mon Jul 7 22:52:56 2014] ... bit width: 40
    [Mon Jul 7 22:52:56 2014] ... generic registers: 2
    [Mon Jul 7 22:52:56 2014] ... value mask: 000000ffffffffff
    [Mon Jul 7 22:52:56 2014] ... max period: 000000007fffffff
    [Mon Jul 7 22:52:56 2014] ... fixed-purpose events: 3
    [Mon Jul 7 22:52:56 2014] ... event mask: 0000000700000003
    [Mon Jul 7 22:52:56 2014] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [Mon Jul 7 22:52:56 2014] x86: Booting SMP configuration:
    [Mon Jul 7 22:52:56 2014] .... node #0, CPUs: #1
    [Mon Jul 7 22:52:56 2014] TSC synchronization [CPU#0 -> CPU#1]:
    [Mon Jul 7 22:52:56 2014] Measured 3679205328 cycles TSC warp between CPUs, turning off TSC clock.
    [Mon Jul 7 22:52:56 2014] tsc: Marking TSC unstable due to check_tsc_sync_source failed
    [Mon Jul 7 22:52:56 2014] x86: Booted up 1 node, 2 CPUs
    [Mon Jul 7 22:52:56 2014] smpboot: Total of 2 processors activated (7992.43 BogoMIPS)
    [Mon Jul 7 22:52:56 2014] devtmpfs: initialized
    [Mon Jul 7 22:52:56 2014] pinctrl core: initialized pinctrl subsystem
    [Mon Jul 7 22:52:56 2014] RTC time: 1:53:00, date: 07/08/14
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 16
    [Mon Jul 7 22:52:56 2014] cpuidle: using governor ladder
    [Mon Jul 7 22:52:56 2014] cpuidle: using governor menu
    [Mon Jul 7 22:52:56 2014] ACPI: bus type PCI registered
    [Mon Jul 7 22:52:56 2014] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [Mon Jul 7 22:52:56 2014] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [Mon Jul 7 22:52:56 2014] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [Mon Jul 7 22:52:56 2014] PCI: Using configuration type 1 for base access
    [Mon Jul 7 22:52:56 2014] dmi type 0xB1 record - unknown flag
    [Mon Jul 7 22:52:56 2014] mtrr: your CPUs had inconsistent variable MTRR settings
    [Mon Jul 7 22:52:56 2014] mtrr: probably your BIOS does not setup all CPUs.
    [Mon Jul 7 22:52:56 2014] mtrr: corrected configuration.
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Module Device)
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Device)
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(3.0 _SCP Extensions)
    [Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Aggregator Device)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4134 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3EE9 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4378 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED40AF 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
    [Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    [Mon Jul 7 22:52:56 2014] ACPI: Interpreter enabled
    [Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
    [Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
    [Mon Jul 7 22:52:56 2014] ACPI: (supports S0 S3 S4 S5)
    [Mon Jul 7 22:52:56 2014] ACPI: Using IOAPIC for interrupt routing
    [Mon Jul 7 22:52:56 2014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [Mon Jul 7 22:52:56 2014] PCI host bridge to bus 0000:00
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [bus 00-ff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf4007000-0xf4007fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf400c000-0xfebfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfed00400-0xfed1ffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xffafffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: reg 0x10: [mem 0xefffc000-0xefffffff 64bit]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80000-0xffa803ff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x10: [io 0x01f0-0x01f7]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x14: [io 0x03f4-0x03f7]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x18: [io 0x0170-0x0177]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x1c: [io 0x0374-0x0377]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x20: [io 0xbfa0-0xbfaf]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: PME# supported from D3hot
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: [1002:7145] type 00 class 0x030000
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x14: [io 0xee00-0xeeff]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x18: [mem 0xefdf0000-0xefdfffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x30: [mem 0xefe00000-0xefe1ffff pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: supports D1 D2
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
    [Mon Jul 7 22:52:56 2014] acpiphp: Slot [1] registered
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: [14e4:170c] type 00 class 0x020000
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: reg 0x10: [mem 0xef9fe000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: supports D1 D2
    [Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf4007000-0xf4007fff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf400c000-0xfebfffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfed00400-0xfed1ffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xffafffff] (subtractive decode)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
    [Mon Jul 7 22:52:56 2014] ACPI: Enabled 3 GPEs in block 00 to 1F
    [Mon Jul 7 22:52:56 2014] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [Mon Jul 7 22:52:56 2014] vgaarb: loaded
    [Mon Jul 7 22:52:56 2014] vgaarb: bridge control possible 0000:01:00.0
    [Mon Jul 7 22:52:56 2014] PCI: Using ACPI for IRQ routing
    [Mon Jul 7 22:52:56 2014] PCI: pci_cache_line_size set to 64 bytes
    [Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
    [Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x7fed3400-0x7fffffff]
    [Mon Jul 7 22:52:56 2014] NetLabel: Initializing
    [Mon Jul 7 22:52:56 2014] NetLabel: domain hash size = 128
    [Mon Jul 7 22:52:56 2014] NetLabel: protocols = UNLABELED CIPSOv4
    [Mon Jul 7 22:52:56 2014] NetLabel: unlabeled traffic allowed by default
    [Mon Jul 7 22:52:56 2014] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [Mon Jul 7 22:52:56 2014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [Mon Jul 7 22:52:56 2014] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [Mon Jul 7 22:52:56 2014] Switched to clocksource hpet
    [Mon Jul 7 22:52:56 2014] pnp: PnP ACPI init
    [Mon Jul 7 22:52:56 2014] ACPI: bus type PNP registered
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00100000-0x7fed33ff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7fed3400-0x7fefffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffa80000-0xffa83fff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4000000-0xf4003fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4004000-0xf4004fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4005000-0xf4005fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4006000-0xf4006fff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4008000-0xf400bfff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0xf400-0xf4fe] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0x1080-0x10bf] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0x10c0-0x10df] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: [io 0x0809] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0c80-0x0cff] could not be reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0910-0x091f] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0920-0x092f] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0cb0-0x0cbf] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0930-0x097f] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:08: [dma 4]
    [Mon Jul 7 22:52:56 2014] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
    [Mon Jul 7 22:52:56 2014] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [Mon Jul 7 22:52:56 2014] system 00:0a: [mem 0xfed00000-0xfed003ff] has been reserved
    [Mon Jul 7 22:52:56 2014] system 00:0a: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [Mon Jul 7 22:52:56 2014] pnp: PnP ACPI: found 11 devices
    [Mon Jul 7 22:52:56 2014] ACPI: bus type PNP unregistered
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03]
    [Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 8 [mem 0x80000000-0xefffffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 9 [mem 0xf4007000-0xf4007fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 10 [mem 0xf400c000-0xfebfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 11 [mem 0xfec10000-0xfecfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 12 [mem 0xfed00400-0xfed1ffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 13 [mem 0xfee10000-0xffafffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 1 [mem 0xefd00000-0xefefffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 1 [mem 0xefa00000-0xefcfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 2 [mem 0xe0000000-0xe01fffff 64bit pref]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 1 [mem 0xef900000-0xef9fffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 8 [mem 0x80000000-0xefffffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 9 [mem 0xf4007000-0xf4007fff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 10 [mem 0xf400c000-0xfebfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 11 [mem 0xfec10000-0xfecfffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 12 [mem 0xfed00400-0xfed1ffff]
    [Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 13 [mem 0xfee10000-0xffafffff]
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 2
    [Mon Jul 7 22:52:56 2014] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [Mon Jul 7 22:52:56 2014] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [Mon Jul 7 22:52:56 2014] TCP: Hash tables configured (established 16384 bind 16384)
    [Mon Jul 7 22:52:56 2014] TCP: reno registered
    [Mon Jul 7 22:52:56 2014] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 1
    [Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: Boot video device
    [Mon Jul 7 22:52:56 2014] PCI: CLS 64 bytes, default 64
    [Mon Jul 7 22:52:56 2014] Unpacking initramfs...
    [Mon Jul 7 22:52:56 2014] Freeing initrd memory: 6828K (ffff88003729a000 - ffff880037945000)
    [Mon Jul 7 22:52:56 2014] Simple Boot Flag at 0x79 set to 0x1
    [Mon Jul 7 22:52:56 2014] Scanning for low memory corruption every 60 seconds
    [Mon Jul 7 22:52:56 2014] futex hash table entries: 512 (order: 3, 32768 bytes)
    [Mon Jul 7 22:52:56 2014] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [Mon Jul 7 22:52:56 2014] zbud: loaded
    [Mon Jul 7 22:52:56 2014] VFS: Disk quotas dquot_6.5.2
    [Mon Jul 7 22:52:56 2014] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [Mon Jul 7 22:52:56 2014] msgmni has been set to 4005
    [Mon Jul 7 22:52:56 2014] Key type big_key registered
    [Mon Jul 7 22:52:56 2014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [Mon Jul 7 22:52:56 2014] io scheduler noop registered
    [Mon Jul 7 22:52:56 2014] io scheduler deadline registered
    [Mon Jul 7 22:52:56 2014] io scheduler cfq registered (default)
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: device [8086:27a1] has invalid IRQ; check vendor BIOS
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: device [8086:27d0] has invalid IRQ; check vendor BIOS
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: device [8086:27d6] has invalid IRQ; check vendor BIOS
    [Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
    [Mon Jul 7 22:52:56 2014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [Mon Jul 7 22:52:56 2014] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [Mon Jul 7 22:52:56 2014] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
    [Mon Jul 7 22:52:56 2014] vesafb: scrolling: redraw
    [Mon Jul 7 22:52:56 2014] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [Mon Jul 7 22:52:56 2014] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004400000, using 7552k, total 7552k
    [Mon Jul 7 22:52:56 2014] Console: switching to colour frame buffer device 200x75
    [Mon Jul 7 22:52:56 2014] fb0: VESA VGA frame buffer device
    [Mon Jul 7 22:52:56 2014] intel_idle: does not run on family 6 model 15
    [Mon Jul 7 22:52:56 2014] GHES: HEST is not enabled!
    [Mon Jul 7 22:52:56 2014] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [Mon Jul 7 22:52:56 2014] Linux agpgart interface v0.103
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: RTC can wake from S4
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [Mon Jul 7 22:52:56 2014] ledtrig-cpu: registered to indicate activity on CPUs
    [Mon Jul 7 22:52:56 2014] TCP: cubic registered
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 10
    [Mon Jul 7 22:52:56 2014] NET: Registered protocol family 17
    [Mon Jul 7 22:52:56 2014] registered taskstats version 1
    [Mon Jul 7 22:52:56 2014] Magic number: 6:49:862
    [Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: setting system clock to 2014-07-08 01:53:00 UTC (1404784380)
    [Mon Jul 7 22:52:56 2014] PM: Hibernation image not present or could not be loaded.
    [Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
    [Mon Jul 7 22:52:56 2014] Write protecting the kernel read-only data: 8192k
    [Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
    [Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
    [Mon Jul 7 22:52:56 2014] random: systemd urandom read with 1 bits of entropy available
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
    [Mon Jul 7 22:52:56 2014] systemd-udevd[50]: starting version 214
    [Mon Jul 7 22:52:56 2014] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [Mon Jul 7 22:52:56 2014] serio: i8042 KBD port at 0x60,0x64 irq 1
    [Mon Jul 7 22:52:56 2014] serio: i8042 AUX port at 0x60,0x64 irq 12
    [Mon Jul 7 22:52:56 2014] [drm] Initialized drm 1.1.0 20060810
    [Mon Jul 7 22:52:56 2014] ACPI: bus type USB registered
    [Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver usbfs
    [Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver hub
    [Mon Jul 7 22:52:56 2014] usbcore: registered new device driver usb
    [Mon Jul 7 22:52:56 2014] SCSI subsystem initialized
    [Mon Jul 7 22:52:56 2014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [Mon Jul 7 22:52:56 2014] uhci_hcd: USB Universal Host Controller Interface driver
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
    [Mon Jul 7 22:52:56 2014] ehci-pci: EHCI PCI platform driver
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: debug port 1
    [Mon Jul 7 22:52:56 2014] [drm] radeon kernel modesetting enabled.
    [Mon Jul 7 22:52:56 2014] checking generic (d0000000 760000) vs hw (d0000000 10000000)
    [Mon Jul 7 22:52:56 2014] fb: switching to radeondrmfb from VESA VGA
    [Mon Jul 7 22:52:56 2014] Console: switching to colour dummy device 80x25
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: irq 20, io mem 0xffa80000
    [Mon Jul 7 22:52:56 2014] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x1028:0x2002).
    [Mon Jul 7 22:52:56 2014] [drm] register mmio base: 0xEFDF0000
    [Mon Jul 7 22:52:56 2014] [drm] register mmio size: 65536
    [Mon Jul 7 22:52:56 2014] ATOM BIOS: ATI
    [Mon Jul 7 22:52:56 2014] [drm] Generation 2 PCI interface, using max accessible memory
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (128M used)
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
    [Mon Jul 7 22:52:56 2014] [drm] Detected VRAM RAM=256M, BAR=256M
    [Mon Jul 7 22:52:56 2014] [drm] RAM width 64bits DDR
    [Mon Jul 7 22:52:56 2014] libata version 3.00 loaded.
    [Mon Jul 7 22:52:56 2014] [TTM] Zone kernel: Available graphics memory: 1026556 kiB
    [Mon Jul 7 22:52:56 2014] [TTM] Initializing pool allocator
    [Mon Jul 7 22:52:56 2014] [TTM] Initializing DMA pool allocator
    [Mon Jul 7 22:52:56 2014] [drm] radeon: 128M of VRAM memory ready
    [Mon Jul 7 22:52:56 2014] [drm] radeon: 512M of GTT memory ready.
    [Mon Jul 7 22:52:56 2014] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [Mon Jul 7 22:52:56 2014] [drm] radeon: power management initialized
    [Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [Mon Jul 7 22:52:56 2014] hub 4-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 4-0:1.0: 8 ports detected
    [Mon Jul 7 22:52:56 2014] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
    [Mon Jul 7 22:52:56 2014] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: WB enabled
    [Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffff8800370f4000
    [Mon Jul 7 22:52:56 2014] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [Mon Jul 7 22:52:56 2014] [drm] Driver supports precise vblank timestamp query.
    [Mon Jul 7 22:52:56 2014] [drm] radeon: irq initialized.
    [Mon Jul 7 22:52:56 2014] [drm] Loading R500 Microcode
    [Mon Jul 7 22:52:56 2014] [drm] radeon: ring at 0x0000000010001000
    [Mon Jul 7 22:52:56 2014] [drm] ring test succeeded in 10 usecs
    [Mon Jul 7 22:52:56 2014] [drm] ib test succeeded in 0 usecs
    [Mon Jul 7 22:52:56 2014] [drm] radeon atom DIG backlight initialized
    [Mon Jul 7 22:52:56 2014] [drm] Radeon Display Connectors
    [Mon Jul 7 22:52:56 2014] [drm] Connector 0:
    [Mon Jul 7 22:52:56 2014] [drm] VGA-1
    [Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [Mon Jul 7 22:52:56 2014] [drm] Connector 1:
    [Mon Jul 7 22:52:56 2014] [drm] LVDS-1
    [Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] LCD1: INTERNAL_LVTM1
    [Mon Jul 7 22:52:56 2014] [drm] Connector 2:
    [Mon Jul 7 22:52:56 2014] [drm] SVIDEO-1
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] TV1: INTERNAL_KLDSCP_DAC2
    [Mon Jul 7 22:52:56 2014] [drm] Connector 3:
    [Mon Jul 7 22:52:56 2014] [drm] DVI-I-1
    [Mon Jul 7 22:52:56 2014] [drm] HPD1
    [Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [Mon Jul 7 22:52:56 2014] [drm] Encoders:
    [Mon Jul 7 22:52:56 2014] [drm] CRT2: INTERNAL_KLDSCP_DAC2
    [Mon Jul 7 22:52:56 2014] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
    [Mon Jul 7 22:52:56 2014] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: detected 2 ports
    [Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
    [Mon Jul 7 22:52:56 2014] hub 5-0:1.0: USB hub found
    [Mon Jul 7 22:52:56 2014] hub 5-0:1.0: 2 ports detected
    [Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: version 2.13
    [Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    [Mon Jul 7 22:52:56 2014] scsi0 : ata_piix
    [Mon Jul 7 22:52:56 2014] scsi1 : ata_piix
    [Mon Jul 7 22:52:56 2014] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
    [Mon Jul 7 22:52:56 2014] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
    [Mon Jul 7 22:52:56 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
    [Mon Jul 7 22:52:56 2014] ata1.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8860, max UDMA/133
    [Mon Jul 7 22:52:56 2014] ata1.00: 62500000 sectors, multi 8: LBA48 NCQ (depth 0/31)
    [Mon Jul 7 22:52:56 2014] ata1.00: configured for UDMA/133
    [Mon Jul 7 22:52:56 2014] scsi 0:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5
    [Mon Jul 7 22:52:56 2014] ata2.00: configured for UDMA/33
    [Mon Jul 7 22:52:57 2014] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [Mon Jul 7 22:52:57 2014] hub 4-1:1.0: USB hub found
    [Mon Jul 7 22:52:57 2014] hub 4-1:1.0: 4 ports detected
    [Mon Jul 7 22:52:57 2014] [drm] fb mappable at 0xD00C0000
    [Mon Jul 7 22:52:57 2014] [drm] vram apper at 0xD0000000
    [Mon Jul 7 22:52:57 2014] [drm] size 9216000
    [Mon Jul 7 22:52:57 2014] [drm] fb depth is 24
    [Mon Jul 7 22:52:57 2014] [drm] pitch is 7680
    [Mon Jul 7 22:52:57 2014] fbcon: radeondrmfb (fb0) is primary device
    [Mon Jul 7 22:52:57 2014] Console: switching to colour frame buffer device 240x75
    [Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: registered panic notifier
    [Mon Jul 7 22:52:57 2014] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 0
    [Mon Jul 7 22:53:18 2014] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [Mon Jul 7 22:53:18 2014] scsi 1:0:0:0: CDB:
    [Mon Jul 7 22:53:18 2014] cdb[0]=0x12: 12 00 00 00 60 00
    [Mon Jul 7 22:53:18 2014] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 2 dma 96 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [Mon Jul 7 22:53:18 2014] ata2.00: status: { DRDY }
    [Mon Jul 7 22:53:23 2014] ata2: link is slow to respond, please be patient (ready=0)
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] 62500000 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write Protect is off
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [Mon Jul 7 22:53:27 2014] sda: sda1 sda2 sda3 sda4
    [Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Attached SCSI disk
    [Mon Jul 7 22:53:28 2014] ata2: device not ready (errno=-16), forcing hardreset
    [Mon Jul 7 22:53:28 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:28 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:28 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:28 2014] ata2.00: limiting speed to UDMA/33:PIO3
    [Mon Jul 7 22:53:33 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:33 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:33 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:33 2014] ata2.00: disabled
    [Mon Jul 7 22:53:38 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:38 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
    [Mon Jul 7 22:53:38 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:38 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:38 2014] ata2.00: limiting speed to UDMA/33:PIO3
    [Mon Jul 7 22:53:43 2014] ata2: soft resetting link
    [Mon Jul 7 22:53:44 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
    [Mon Jul 7 22:53:44 2014] ata2.00: revalidation failed (errno=-19)
    [Mon Jul 7 22:53:44 2014] ata2.00: disabled
    [Mon Jul 7 22:53:44 2014] ata2: EH complete
    [Mon Jul 7 22:53:44 2014] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
    [Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): re-mounted. Opts: data=ordered
    [Mon Jul 7 22:53:44 2014] systemd-udevd[150]: starting version 214
    [Mon Jul 7 22:53:44 2014] ACPI: acpi_idle registered with cpuidle
    [Mon Jul 7 22:53:44 2014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [Mon Jul 7 22:53:44 2014] ACPI: Battery Slot [BAT0] (battery present)
    [Mon Jul 7 22:53:44 2014] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    [Mon Jul 7 22:53:44 2014] ACPI: AC Adapter [AC] (on-line)
    [Mon Jul 7 22:53:44 2014] acpi device:2d: registered as cooling_device2
    [Mon Jul 7 22:53:44 2014] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2a/LNXVIDEO:00/input/input2
    [Mon Jul 7 22:53:44 2014] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
    [Mon Jul 7 22:53:44 2014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [Mon Jul 7 22:53:44 2014] ACPI: Lid Switch [LID]
    [Mon Jul 7 22:53:44 2014] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [Mon Jul 7 22:53:44 2014] ACPI: Power Button [PBTN]
    [Mon Jul 7 22:53:44 2014] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
    [Mon Jul 7 22:53:44 2014] ACPI: Sleep Button [SBTN]
    [Mon Jul 7 22:53:44 2014] wmi: Mapper loaded
    [Mon Jul 7 22:53:44 2014] thermal LNXTHERM:00: registered as thermal_zone0
    [Mon Jul 7 22:53:44 2014] ACPI: Thermal Zone [THM] (25 C)
    [Mon Jul 7 22:53:44 2014] intel_rng: FWH not detected
    [Mon Jul 7 22:53:44 2014] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [Mon Jul 7 22:53:44 2014] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [Mon Jul 7 22:53:44 2014] leds_ss4200: no LED devices found
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: autoconfig: line_outs=3 (0xf/0xe/0x11/0x0/0x0) type:speaker
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: mono: mono_out=0x0
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: dig-out=0x9/0x0
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: inputs:
    [Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: Mic=0x10
    [Mon Jul 7 22:53:44 2014] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
    [Mon Jul 7 22:53:44 2014] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
    [Mon Jul 7 22:53:44 2014] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [Mon Jul 7 22:53:44 2014] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [Mon Jul 7 22:53:44 2014] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [Mon Jul 7 22:53:44 2014] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [Mon Jul 7 22:53:44 2014] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
    [Mon Jul 7 22:53:44 2014] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
    [Mon Jul 7 22:53:44 2014] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
    [Mon Jul 7 22:53:44 2014] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
    [Mon Jul 7 22:53:44 2014] kvm: disabled by bios
    [Mon Jul 7 22:53:44 2014] input: Dell WMI hotkeys as /devices/virtual/input/input9
    [Mon Jul 7 22:53:44 2014] iTCO_vendor_support: vendor-support=0
    [Mon Jul 7 22:53:44 2014] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [Mon Jul 7 22:53:44 2014] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
    [Mon Jul 7 22:53:44 2014] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [Mon Jul 7 22:53:44 2014] gpio_ich: GPIO from 206 to 255 on gpio_ich
    [Mon Jul 7 22:53:44 2014] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
    [Mon Jul 7 22:53:44 2014] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
    [Mon Jul 7 22:53:44 2014] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:15:c5:4b:f3:24
    [Mon Jul 7 22:53:45 2014] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
    [Mon Jul 7 22:53:45 2014] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
    [Mon Jul 7 22:53:45 2014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [Mon Jul 7 22:53:45 2014] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 128333
    [Mon Jul 7 22:53:45 2014] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [Mon Jul 7 22:53:45 2014] mousedev: PS/2 mouse device common for all mice
    [Mon Jul 7 22:53:46 2014] random: nonblocking pool is initialized
    [Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
    [Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
    [Mon Jul 7 22:53:48 2014] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [Mon Jul 7 23:11:28 2014] b44 ssb0:0 eth0: Link is down
    [Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
    [Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
    [Mon Jul 7 23:12:54 2014] PM: Syncing filesystems ... done.
    [Mon Jul 7 23:12:54 2014] PM: Preparing system for mem sleep
    [Mon Jul 7 23:12:55 2014] Freezing user space processes ... (elapsed 0.047 seconds) done.
    [Mon Jul 7 23:12:55 2014] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
    [Mon Jul 7 23:12:55 2014] PM: Entering mem sleep
    [Mon Jul 7 23:12:55 2014] Suspending console(s) (use no_console_suspend to debug)
    [Mon Jul 7 23:12:55 2014] b44 ssb0:0 eth0: powering down PHY
    [Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Stopping disk
    [Mon Jul 7 23:12:55 2014] PM: suspend of devices complete after 393.015 msecs
    [Mon Jul 7 23:12:55 2014] PM: late suspend of devices complete after 0.713 msecs
    [Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
    [Mon Jul 7 23:12:55 2014] PM: noirq suspend of devices complete after 15.766 msecs
    [Mon Jul 7 23:12:55 2014] ACPI: Preparing to enter system sleep state S3
    [Mon Jul 7 23:12:55 2014] PM: Saving platform NVS memory
    [Mon Jul 7 23:12:55 2014] Disabling non-boot CPUs ...
    [Mon Jul 7 23:12:55 2014] smpboot: CPU 1 is now offline
    [Mon Jul 7 23:12:55 2014] ACPI: Low-level resume complete
    [Mon Jul 7 23:12:55 2014] PM: Restoring platform NVS memory
    [Mon Jul 7 23:12:55 2014] Enabling non-boot CPUs ...
    [Mon Jul 7 23:12:55 2014] x86: Booting SMP configuration:
    [Mon Jul 7 23:12:55 2014] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [Mon Jul 7 23:12:55 2014] CPU1 is up
    [Mon Jul 7 23:12:55 2014] ACPI: Waking up from system sleep state S3
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
    [Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
    [Mon Jul 7 23:12

    I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
    I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
    The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
    IdleActionSec=9min
    IdleAction=suspend
    Will check it and report back.

  • Cant find i i life after installing it and iphoto has stopped working

    cant find i i life after installing it and iphoto has stopped working

    If it is a new Mac then iLife came preinstalled on it
    As to searching for iLife - it is not an application - it is a suite of five applications - iPhoto - iMovie - IDVD - iWeb - Garage Band  --  http://store.apple.com/us/product/MC623Z/A/iLife-11?fnode=NDQ5MDg0MA&mco=MjA4Nzk 4OTQ
    Do you have these five applications in your applications folder?
    what happens when you launch them?
    LN

  • [svn:osmf:] 10991: Fix bug FM-119, where the playhead time doesn' t get updated until after the seek has completed.

    Revision: 10991
    Author:   [email protected]
    Date:     2009-10-17 22:52:28 -0700 (Sat, 17 Oct 2009)
    Log Message:
    Fix bug FM-119, where the playhead time doesn't get updated until after the seek has completed.  The bug is actually in Flash Player (FP-1705), and the workaround is to wait until NetStream.time gets updated before dispatching the seek completion event.  This changelist also updates the unit tests and NetMocker to verify the fix.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-119
        http://bugs.adobe.com/jira/browse/FP-1705
    Modified Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/net/NetStreamSeekableTrait.as
        osmf/trunk/framework/MediaFramework/org/osmf/traits/SeekableTrait.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/audio/TestAudioSeekableTrait.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/media/TestMediaPlayer.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/net/TestNetStreamSeekableTrait.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestISeekable.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestSeekableTrait.as
        osmf/trunk/libs/adobe/NetMocker/org/osmf/netmocker/MockNetStream.as
        osmf/trunk/libs/adobe/NetMockerTest/org/osmf/netmocker/TestMockNetStream.as

    Revision: 10991
    Author:   [email protected]
    Date:     2009-10-17 22:52:28 -0700 (Sat, 17 Oct 2009)
    Log Message:
    Fix bug FM-119, where the playhead time doesn't get updated until after the seek has completed.  The bug is actually in Flash Player (FP-1705), and the workaround is to wait until NetStream.time gets updated before dispatching the seek completion event.  This changelist also updates the unit tests and NetMocker to verify the fix.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-119
        http://bugs.adobe.com/jira/browse/FP-1705
    Modified Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/net/NetStreamSeekableTrait.as
        osmf/trunk/framework/MediaFramework/org/osmf/traits/SeekableTrait.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/audio/TestAudioSeekableTrait.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/media/TestMediaPlayer.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/net/TestNetStreamSeekableTrait.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestISeekable.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestSeekableTrait.as
        osmf/trunk/libs/adobe/NetMocker/org/osmf/netmocker/MockNetStream.as
        osmf/trunk/libs/adobe/NetMockerTest/org/osmf/netmocker/TestMockNetStream.as

  • I Have been getting BAD battery life after the ICS UPDATE !! on the DROID RAZAR MAXX have this happen to any one else ??????

    i have been getting really bad battery life after install ICS on my droid razar maxx i can only go 1 day and 3 hours where i used to be able to go 2 day easy have this happen to anyone else can someone tell me how i can make my battery life better??????/ and do i need to let my phone go complete dead before fully chargeing it again ??????
    before install the ICS update i had 30 percent of battery life remaining so i pluged it in and let charged for a little bit while it updated my phone and ever thing after it updated i unplug my phone and started playing on my phone to see what ICS was all about but when it got to 15 and said " connect to your changer so i did !!!!! should i haved let my phone going complete dead since i unplug without it fully changer or does it matter ?????????????? if someone could please help me !!!!:)

    What was your battery reading right after the update when you unplugged the phone? I have never let my Maxx drain further than 20% battery ever before I charge it. Yesterday after the update I also played more with the phone trying to learn the OS, as did most everyone on this forum. Give it a few days of your normal use before you decide your battery life has decreased. I took my phone off charger today at noon, it was 100%, and now it's 80%, with about 30 min talk time, and mostly standby. that's about normal batt life for me, maybe a little better than before the update. I'm still going to watch it for a few days before I make a conclusion about battery life.

  • Seeking advice: moving universe between systems

    Hi all,
    I've been spending some time trying to work through the Business Objects documentation to try and understand what's involved in migrating a Universe from a non-SQL Server based system to a SQL Server based system.
    I'm seeking advice not having used Business Objects as I am attempting to estimate the work involved for a customer who currently uses BO. I don't know whether it's just a simple exercise of changing the database connection, or whether more work is involved. I've tried to get this information through SAP formally, but not currently being a BO customer they've refused to answer any questions.
    During the course of the migration of the underlying data tables, some columns in some tables have changed their data-type (e.g., from smalldatetime to datetime, or changes in length/precision). I'm also not sure if the tables have changed name: in the old system, they are named in a SQL type manner (i.e. <prefix>.<tablename>) however in SQL Server the objects will be placed in a database named <prefix> with each table being named <tablename>.
    Would this potentially require a full drop of every object in the Universe, or could this exercise be achieved without having to remove and re-add any objects by saying "this object in the Universe is now this object in the database".
    Any advice welcome.
    Cheers,
    Chris...

    Hi Chris,
    The universe is quite a simple tool in that it maps the sql directly to objects. So if the universe points to a table name that is no longer present, you wil get an error in the report, or when you check the integrity of the universe (tools, check integrity)
    The standard formats will move accross without an issue, however it is possible to use vendor specific code in objects. So for instance I could write
    nvl(my_table.my_col, 0) in Oracle
    or
    IsNull(my_table.my_col, 0) in MS SQL.
    If you objects contain these defintions then your job is going to get harder.
    Regards
    Alan

  • Seeking advice ABAP With BW

    Hi Friends/Professional,
    I am working as ABAP Consultant, i would like to learn new technology in sap, i am seeking advice please help me.
    As a abaper shall i select BW or XI or ABAP HR
    which is best acording to industry india/us market.
    i am not interested in coding, please advice,
    few friends giving advice BW.
    shall i go BW or any other module.
    please give advice asap.
    Thanks in advance
    Manisha

    Hi,
    If ur good at ABAP, learn BI/BW, it is the best combination to prefer. Usaully ABAP''ers learn BW very fast( seen this practically). so go ahead & learn BI/BW.
    The  BI BOOKs /Material's which is provided bySAP:
    TBW10 (BI – Enterprise Data Warehousing)
    TBW20 (BI – Reporting & Query Design)
    TBW41 (BI – Extraction with UDI & XI and APD)
    TBW42 (BI – Advanced Enterprise Data Warehousing & Reporting)
    TBW45 (BI – Integrated Planning
    For syllabus details....check the following link...
    http://www.sap.com/services/education/certification/certroles/certificationtest.epx?context=FFC760B8923D16BB5150DAE63E7C1A6B331AF0B9E3A8F73CE3A9B7046E051044503600C911DBA13DCE978D3AC9057626D2B68111A7CD2D707E2EEC31213097E46EB790DD0106435EE0756F7B22F3FA4B4FF0645C06954BF3A150E023B4164DA2C3943DE02E599735DB9B4334B30B38FF20A1DC779D8F55E5F7A6893BDBFA38B94CF455E2A3E0E6851014966C90C80E173937CF7C2372A6FC%7cDA891B3C877030D9765B85CAE6AC82FC3EB6BC7DA10B7335
    Hope this helps,
    regards
    CSM Reddy

  • Wireless driver triggers warm/hot macbook and low battery life after OS 10.8 mountain lion upgrade

    Hello frustrated Macbook users.
    I have tried to get help on other Apple discussions but no one seems to want to help, they aren't actually reading my posts, or they hate me for some reason. 
    No matter.
    If you have a warm Macbook that has 2.5 hours of battery life where you used to have 4 or more, please do this simple procedure and write the result below.
    Turn OFF Airport wireless networking
    Perform an SMC reset (Power Manager)
    Connect an ethernet cable and use your Macbook normally. (but do NOT turn on wireless networking again)
    How is your battery life after doing this?
    I have a user over here who reclaimed decent battery performance if he doesn't use his Airport wireless.
    I need confirmation.
    If so, I may get a USB wireless adapter and see if the battery life stays good.
    Bonus points:  If you have a Mac compatible USB wireless adapter and got good results by turning off the built-in adapter, want to test it for me and report the results?
    Thanks and good luck!
    meta:  short time install snow leopard hours overheating shorter shortened lower

    UPDATE:
    Problem persists when using Recovery Partition.
    Chance sthat it is third party softwae or updates is more or less eliminated.
    Update 10.8.3 beta fixed the problem for one lucky early adopter.
    Hypothesis: New battery charging algorithms programmed into Mountain Lion OS10.8 triggered problems from design flaws that were NOT an issue for OS 10.7 and before.
    Battery replacements were successful where the replacement battery was built within tolerances that did not fail under 10.8's new charging algorithms. Other bateries did not meet those tolerances so you would get spotty results from battery replacements.  It worked sometimes, but not always.
    OS 10.8.3 may have adjusted these algorithms to be less demanding on the features of the battery that were failing.
    Official word from Apple is 'mum'.

  • Seeking advice for backing up Xserve G5 w/ RAID PCI card

    Hello all!
    I'm a newbie to Macs and server admin, and I have inherited the job of setting up a server at work for file storage. I'll do my best to give a concise description of our set-up - I'm looking for some advice on the last few odds and ends... mainly how we can backup the system.
    We bought an Xserve G5 with an option RAID PCI card. We have 3 500GB drives in the Xserve, configured to RAID 5 (giving us effectively 1TB of storage space). We will be using the server for data storage. About 20 computers will access the server over a network; we are using an assortment of Macs and PCS.
    I am seeking advice on backup systems for the server. In the event that the RAID5 fails, we don't want to lose our data. We just need a snapshot of the server; we don't need to archive data or to take the HD offsite. Our old server just used Retrospect to run incremental backups every night (with a complete clean backup once a month). Our current thought is to attach large external hard drive to our admin computer (not the server directly) and run nightly backups as before.
    The major points I have are:
    -Any thoughts on reliable 1 TB external drives?
    -Any recommendations on software that can backup from a RAID over a network? I found info for Retrospect Server 6.0 - it seems to do what we want, but is rather pricey.
    Thanks in advance for any advice! I really appreciate it!
    Xserve G5 Mac OS X (10.4.2)

    Greetings-
    We all started out as newbies at one time or another-no worries. That is why we are here.
    I personally use the Lacie branded drives. They are sturdy and reliable. My only thoughts here are to have at least three external drives-one for today's backup, one for a backup stored securely nearby, and one to be securely stored off-site. Rotate the drives daily so that your worst-case scenario will be a catastrophe that requires you to use a three-day old backup, depending upon how old your off-site backup is. Not ideal but better than the alternative. External drives are cheap enough these days to allow you to do this at a reasonable cost. Plus it is easy enough to throw one in a briefcase and tote it home for safety (just don't lose it!)
    I would stay away from Retrospect. If you search these forums you will find several instances of folks having some serious issues with the program. I use a program called Carbon Copy Cloner that does the job nicely for my basement server. There are ways to do the backups via the command line interface as well but I am not so familiar with those commands. You may have to dig a little deeper to find something that works for you.
    One of the other advantages of the FW external drive is that you can share it with other users, so perhaps you can set things up to have your network backups to go to that drive. Tis a thought.
    Luck-
    -DaddyPaycheck

  • How can i maximize my battery life after its been damaged

    how can i maximize my battery life after its been damaged?

    Just like it had nevr been damaged; fully dischagre and charge monthly, minimize battery drain so you minimize charge/dischare cycles.

  • Battery 79% life after 72 recharge cycles and Amperage -1356

    Hi to all, this is my story, I've bought a macbook pro 15'' on November 2007 and in about 4 months battery was at 50% of life after 92 recharge cycles, after one year from purchase, apple store has changed battery, megasafe and the connector on the macbook, now the situation isn't changed and I have a battery, like in object, with 79% of life after 72 recharge cycles and the Amperage in the information window is (-1356) very strange!!! Why there's a negative amperage? and why my battery works so bad? I always charge the battery when is completely discharged and when i do this the macbook is off, sometimes I use macbook with megasafe connected but in this situation I remove the battery. Can i have a new battery from apple in free substitution?

    Hi alby_mo and welcome to the forums.
    The amperage figure you mention will ALWAYS be negative when running from the battery and be positive when the battery is actually charging.
    Your battery life is not uncommon, (many people only get about 18 months life out of these batteries, I'm afraid) but you are going about the charging process all wrong!
    You should avoid completely discharging Lithium batteries as much as possible, and use them regularly and lightly if possible. Discharging them completely all the time reduces their lives substantially. THis used to be a good idea in the past with NiCad batteries that would develop a "memory" problem otherwise, but it is not so with Lithium batteries.
    The only time that you really need to completely discharge your MacBook Pro battery is when you "calibrate" it, which you should do every month or two. See http://support.apple.com/kb/HT1490 for instructions.
    See http://discussions.apple.com/thread.jspa?threadID=1764220 for a good FAQ with information about how to look after your battery, together with Apple's own comments at http://www.apple.com/batteries/notebooks.ht
    You should stop running the computer without a battery installed, too, for the reasons set out at http://support.apple.com/kb/HT2332. It has little effect on the battery because charging is disabled once the battery reaches 100% and doesn't start again until it has dropped to the mid 90's. Better , instead, to get into the habit of running the computer on battery for an hour or so each day, and just leaving it on the charger the rest of the time, whether you are using it or not.
    The "health" of your battery seems to reduce when the charge gets low because dying Lithium batteries build up increasing internal resistance, which becomes more apparent as the voltage drops.
    You can ask Apple service in Italy (or an AASP) about a free replacement, but I wouldn't get your hopes up. Many people with 2007 MBps are already on their second and third batteries, and Apple generally will only replace them during the warranty period. Some people seem to get lucky, though, and you can't lose anything by asking!
    Cheers
    Rod

  • Firewire 800 Port back to life after power shutdown?

    I experienced a strange event and would like to share it with you for feedback and comments.
    During several days the external hard disk connected to the Firewire 800 port of my IMAC caused me increasingly problems, and eventually the disk would not mount at all on the desktop. I connected the disk to the FW800 port of my portable and the disk worked quite fine. I concluded that the FW800 port of the IMAC was damaged. I was preparing myself to contact Apple to get the IMAC repaired.
    Then recently we had a general shutdown of power in our town, for several hours.
    When the power came back, I had the idea to reconnect the external disk to the FW800 port, and miracle, the disk mounted immediately and has been working fine since.
    Is is possible that the ports of the computer come back to life after a power shutdown? How is this possible?
    Can I conclude that it is recommended to disconnect a computer from time to time, just to reset some parameters?

    Yep, both USB and Firewire ports can get in into a "bad state" and only complete removal of power will reset those chip sets.
    Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes powering the ports to do stuff like detect when a device is plugged in or wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, locks up, etc., simply power cycling (shutdown & restart) the computer won't work.
    So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac). Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chipset alive. Now let it sit for a minute (give those big power caps in there time to discharge). Now plug stuff back in & start up the Mac. Now see if your USB or Firewire ports work any better.
    Even Apple acknowledges this occasional issue...
    What to do if your computer won't recognize a FireWire or USB device
    http://support.apple.com/kb/HT1317?viewlocale=en_US
    Best of luck!
    Patrick

Maybe you are looking for

  • Did Lenovo update, Windows 8.1 won't load. BSOD

    I did an update from Lenovo which included video drivers, BIOS, and other stuff. Now my computer won't start. I get a BSOD and then the computer loops into the Automatic Repair menu (Windows 8.1). I did a System Restore Point and even though the OS s

  • How can I improve quality of photos in In Design Brochure?

    Hi, I'm trying to create an In Design Brochure but am finding that many of the photos are pixellated despite being of high res 300 dpi.  Is it better to use photos with a higher or lower resolution that I want to be for example a sixth of A4 on a pag

  • 9.0.3 Upgrade Moved the Navigation Box from Top to Side How can I Fix this?

    In all my previous version of itunes (5+ years worth), I've used the navigation bar on top of the master library list, I'm sure what the official name is, but it opened on top of the library and I could sort my artist, album or genre. I just upgraded

  • Vendor Country field attribute

    Hi, I am setting attributes to certain fields on Vendor master to swith to DISPLAY mode for a certain accoutn groups. Under general data , i dont see "COUNTRY" field. If I want to make the country field to DISPLAY mode for certian account group , how

  • Define main objects for Drag & Relate between BW 3.1 and EP6

    hi all. We are trying to implement Drag & Relate between BW 3.1 and EP6. We have 2 different BW reports based on the same object "0MATERIAL". One of them should be a source and the other is the target. When creating the iViews for these reports the "