Life Proof Case- Maybe not so Life Proof?

My sister has an Iphone 5s and she bought a lifeproof case 3 months ago to protect it. Last week she dropped it on the concrete floor while it was in the lifeproof case and the whole screen smashed. It still works but about 75% of the screen is cracked. Is there anyway she can get her phone fixed for free or anything to help it because it was in the case when it fell? She is heartbroken as she paid with her own money for both the case and the phone. And it is ridiculously expensive to get it fixed properly.
The case is meant to protect the phone from getting smashed isn't it? Anything we can do about it?

From their warranty document:
the limited warranty does not, under any circumstances, cover the replacement or cost of any electronic device or personal property inside or outside of the LifeProof product.
Sorry.

Similar Messages

The sound quality of my speaker suddenly got really poor when playing music or videos. Sounds like an old AM radio or Sputnik. Pretty sure it's hardware related but maybe not. Thoughts on what the problem might be and if it can be repaired?

The sound quality of my speaker suddenly got really poor when playing music or videos. Sounds like an old AM radio or Sputnik. Pretty sure it's hardware related but maybe not. Thoughts on what the problem might be and if it can be repaired?

The batterys the ipods come with are very sensetive somtimes they dont react right to the first couple of charges. Try fully charging it and then leaving it on until its completely drained a few times. If that doesnt work it might be a lemon.

Account determination for entry CASI DIF not possible.

Hi Friends,
While doing Invoice (MIRO) against PO, I have encountered below error.
IR Error:
Account determination for entry CASI DIF not possible.
Please help to how to resolve.
Warm regds,
Raman,

Hi,
If you click on the message you will get help, it will show you exactly which entry in the auto account assignment table is missing. Note the details (COA valuation area etc.) then at the bottom of the message is a link to take you into the transaction where you can make the appropriate settings (assuming that you have access and this is not your production live system).
CASI may well be yyour chart of accounts and DIF is the transaction event key. The system needs to know which GL to post to in this situation.
Steve B

Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

I recently upgraded to itunes 11.0.1.12 and that fixed the CD Jewel Case Insert song titles problem. Thanks itunes. It's working great!!.

HT1338 My MacBook Pro (running Leopard 10.5.8) won't allow keyboard to type an upper case 'C' using the shift key...works fine with caps lock, or, with my Typinator workaround using double-typed lower case c (not always best). Any ideas?

My MacBook Pro keyboard won't type an upper case 'C' using the shift key... only with caps lock. Workaround has been to use Typinator by typing a double lower case c, not always the best solution. Mac is a refurbished model, which initially was fine. Apple tech helped me correct the quirk when it first appeared, but now it has returned and refuses fixes. Any ideas?

I'm willing to bet that this has something to do with iCloud. I've been facing a frozen computer nearly every time I go into it.
In Activity Monitor I have seen two programs associate with iCloud that take up about 2.5 GB of memory (I only have 4 in the computer) -- causing everything to freeze. One of these is called "iCloud Helper" and the other one is something like "Address Book Sync helper" -- I see parts of these names in the stuff you have posted.
I am at my wits' end with these and have written to Apple asking them to do away with these or fix them. To get rid of the Address book sync thing I have gone into system preferences for iCloud and unchecked Contacts -- but then spontaneously it gets rechecked. And oftentimes after I Force Quit the iCloud helper, it spontaneously turns on again. My conclusion --- the iCloud is basically unusable. It turns a Mac into the most useless, clogged, sluggish PC. If this is happening to a lot of people's computers -- and I see no reason why yours or mine should be an exception -- these programs just might destroy Apple itself.
So -- I'm about to completely give up on iCloud, and I suspect that others will too unless this gets fixed.
Cheers,
Bob

False/True Case is not working. Please Help!

Dear all,
I attached my block diagram, one attachment refers to true case and the other refers to false case.
My program runs like this: when i run the vi , after homing the motor (there is home.vi), DAQ is collecting the values in the while loop, and according to the DAQ's value, motor should run the False/True case but it does not
As a result: true/false case is not working which is located at the outside of the loop(bottom side of the block diagram)
When i put the the True/false inside the Loop(DAQ's loop) , then it is working. But this brings lots of problem, two of them is:
1-) When the DAQ values goes below to "50" then it turns to true case again,
2-) The false case has stop.vi which cause to motor stop every iteration of the loop.
So that is why i put True/False case out of the loop but now it is not working at all.
Please answer, waiting response.
Thank you,
Have a nice day,
Kind Regards.
Attachments:
OutloopTrueMode.pdf ‏432 KB
OutofLoopNotWorking.pdf ‏443 KB

Salander wrote:
Dear GerdW,
Thank you for reply, You can see my answers written with red.
"As long as the case structure is located outside the loop it will not be called before the loop stops. THINK DATAFLOW!"
- The case structure need to run same time with the loop, because as you can see from the attachments the case structure is also integrated with DAQ values.. loop is continuous till i press the stop button. So what i understand that this case structure will not work because loop is continuous?? Cant we upgrade the vi. or do smthg that it can be able to work same time with the loop??
Kind Regards.
You have to place the case structure inside the while loop ( Any significance is there on placing the case outside the loop? ).
Salander wrote:
Dear GerdW,
Btw. it would be much more useful to attach real pictures or, even better, the VI...
Because most of the people dont have my "motor controller's labview drivers" I attached as a PDF file which is very popular.
Not Really * .png file ( vi snippet ) is much more popular here in Discussion Forum
The best solution is the one you find it by yourself

Dispute case does not get updated with subsequent partial payment

Hi Experts
I am now still testing the Dispute management .. but it's my first time to see that some times created dispute case does not get updated with the payment posted against the invoice which the dispute case has been raised .. when i trying to add open item to the current dispute case i face this Error..
Process step 004: Change not possible, process step 003 missing
Message no. UDM_MSG037
Diagnosis
The dispute case is to be changed by process step 004 from accounting. However, there is at least one process (for example, clearing transaction from payment or credit memo) that was performed before the current step and that has not yet updated the dispute case. The changes to the dispute case must be carried out in the correct order.
System Response
The dispute case could not be changed.
Procedure
In an asynchronous change to dispute cases using IDoc, make sure that all IDocs of the previous process have been posted. Then you can carry out the required action (for example, post the current IDoc from process step 004 or include further items). The immediate previous process step is 003.
Your kind feed back is highly appreciated..
Regards
Mahmoud EL Nady

Hi
Thanks for straight forward solutions its now working properly after run the program.. thanks too much..
also do i need to run this program periodically or once i notice that one dispute case it not getting updated?
Regards
Mahmoud El Nady

Exchange 2013 or SP1 Installaing Single CAS Role not installaing EWS virtual directory in mixed environment

Hi Experts,
I am facing issue while installing exchange 2013 sp1 in mixed(2007, 2010 and 2013) environment, the issue is: CAS role not installing/configuring "Echangeweb" (ews) virtual directory if i install only CAS role. If i install CAS role and mailbox
role then there is no issue, everything is fine.
In single CAS role installation, "EWS" folder is creating inside "Exchangeweb" folder but it shows empty folder.
If any one have any idea please let me know, why this is happening? was i am doing anything wrong while installing?
Regards,
Ravi Nalla
Hewlett-Packard
ravinalla

Hi Ravi,
Agree with Martina. I install Exchange 2013 CAS server and Mailbox server separately. "exchweb" folder exists on Mailbox server only. Here is the exchweb folder information on Mailbox server for your reference.
Here is the ews folder information on CAS server for your reference.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Case #0184579519 not resolved. How do you intend to fix my situation for a product i have purchased?

Case #0184579519 not resolved. How do you intend to fix my situation for a product i have purchased?

Contact Adobe direct http://helpx.adobe.com/contact.html
These are user-to-user forums frequented by Adobe customers.
Only Adobe Staff can assist you with a case number and they only visit these forums occasionally.

My sim got stuck in Iphone 4 S, Sim case is not opening it got stuck

my sim got stuck in Iphone 4 S, Sim case is not opening it got stuck

Hi Mehrabi,
Thanks for using Apple Support Communities. This article has steps you can take when you're not able to update, including what to do if your device isn't recognized by iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Ari

Case Statement Not returning resutlset Varbinary

Declare @val varbinary
set @val = cast('123456789' as varbinary)
select @val as value -- Varbinary Value Result
Declare @check bit
set @check= 1
--THis Case Statement Not returning Result set in Varbinary .
select case @check when 1 then @val else 1 end as value

See the below part from MSDN documentation reg return type
Returns the highest precedence
type from the set of types in result_expressions and
the optional else_result_expression.
http://msdn.microsoft.com/en-IN/library/ms181765.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

"case when not m[1] is present then" outputs ORA-03113

I find that "case when not m[1] is present then" outputs ORA-03113:
Why?
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
select * from dual model
dimension by(0 as d)
measures(1 as m)
rules(
m[any] = case when not m[1] is present then 1 end);
ORA-03113:Below one is alterNative solution.
select * from dual model
dimension by(0 as d)
measures(1 as m)
rules(
m[any] = case when presentv(m[1],1,0) = 0 then 3 end);
D M
0 3

I get:
ops$me%DB> select * from dual model
2    dimension by(0 as d)
3    measures(1 as m)
4    rules(
5    m[any] = case when not m[1] is present then 1 end);
select * from dual model
ERROR at line 1:
ORA-03002: operator not implemented
Elapsed: 00:00:00.03
ops$me%DB> select banner from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production

How to make oracle is case insentive ( not case sensitive)

SqlServer by default is NOT case sensitive (data content) while Oracle by default is case sensitive (data content).
please help me to give the solution
How to make oracle is case insentive ( not case sensitive)
if there is anyway to make Oracle behave like SqlServer changing NLS settings or any other Oracle settings?
I have solution for application level . it is working fine
Possible solutions:
1. You want to store data case insensitive: do an 'insert...
values(upper('Abcd'))...'.
This will put your data in upper case into the tables.
2. Your data will be mixed-case and you want to select them case
insensitive:
create 'function based indexes' on every column you want to use in
your where-clauses.
Then 'select ... where <column_name> = 'ABCD'.

What version of Oracle? Oracle 10g has a capability that can toggle this feature on and off at the session level. Prior versions do not.
For prior versions you usually have to make use of the upper and/or lower functions in your queries. Sometimes a function based index, FBI, is used to handle this.
HTH -- Mark D Powell --

Arch Manga Babe Wallpaper (maybe Not Safe For Work)

Hi All,
Some time ago I found the picture of a lovely manga babe somewhere in the net (can't remember where).
I did not like the ugly background, so I cut out the girl's silhouette with my primitive Gimp skills and put her in a more elegant and boring black background with the Arch logo.
Thumb link:
http://www.tastyrabbit.net/gfx/archMangaBabe-thumb.jpg
Full Resolution link:
http://www.tastyrabbit.net/gfx/archMangaBabe.jpg
I also tatooed the girl with the Arch logo!!
The image is 1920x1200, feel free to crop it to suit your resolution.
Hope you like it.
Enjoy.
Fnord.

moljac024 wrote:
molom wrote:
'Arch Manga Babe Wallpaper (maybe Not Safe For Work)'
Thanks to you I just got FIRED!!!
PS. Totally worth it though
Omg are you for real ?
EDIT: Off-topic, but what is the best way to cut out a silhouette in GIMP ?
I think so, not sure whether it was me being fired, or I got retrenched or got a redundancy, but it was worth it and that's all that matters. Who needs jobs? Wait... Aren't we facing a recession soon... CRAP!!!
BTW is this what you're looking for? - http://acedar.blogspot.com/2007/08/gimp … o-cut.html
Last edited by molom (2008-10-17 11:52:46)

FSCM- Dispute cases were not closed automatically for credit disputed amounts

Dear All,
We are creating the dispute cases for overpayment or un-applied cash payments (that is credit document) through FDM_AUTO_CREATE. But those credit dispute cases were not closed automatically after I cleared the documents through F-26 or F-32.
We are running FDM_PROCESS_BUFFER program through batch job for every hour. And we made correct configuration for automatic dispute case close in SPRO. Also the debit disputes were closed automatically.
Especially we are facing this issue for credit special g/l transaction (partial/residual/charge of difference clearing) documents.
Note : I can see two changes automatically in credit dispute cases these are, 1) Disputed amount get zero 2) Disputed objects (that is credit document) is automatically removed (Attributes => Linked Objects => Disputed Objects) in the credit dispute cases
Can you please help me how to resolve this issue.
Thank you in advance.
Thanks & Regards,
KVP

Dear Experts,
Can I have solution for this issue.
Thanks & Regards,
KVP

Life Proof Case- Maybe not so Life Proof?

Similar Messages

Maybe you are looking for