Life & Work Events (Guided Procedures)

Is there a configuration document or any other material on how to set up the Life & Work Events and Guided Procedures Process in ESS?
Thanks
WB

Refer to the following link:
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm
Hope it helps.
Shikhil

Similar Messages

  • LIFE & WORK EVENTS UNDER ESS

    Dear Experts,
    We are using ECC 6.0 EHP4, portal is version 7 EHP1 .
    My concern is how to activate life & work events in , i tried with customizing GP using life & workevents US standard , but still it is throwing some error.
    Can any one give the links or inputs  for activation of life & work events with GP.
    soonest reply is highly appreciable.
    Thanks
    naga
    naga

    check here
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/80/7d6641df6c7f47e10000000a1550b0/frameset.htm
    check the guided procedures!

  • Life & Work Events

    Hi Experts
    I am using the Internation version (99) and want to use the Life & work events functionality. In the standard package I am not able to see any 99 related Iview for this functionality.
    Please help me how to do it in 99 version.
    I had copied the US (10) service and make it to 99 but no success..
    Thanks
    Sheetal Gupta

    There is no version for 99, You need to make it a country specific applicaiton ie reuse refer here
    should be easy  to do if you folow the path in spro and wiki
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99

  • Life work events and Guided Procedure

    Hi,
    We have installed ESS business package on EP7 portal and connected to ECC 6.0. We want to configure Life and Work Events (LWE). When a user clicks on Life and Work Events Tab > First Day, Marriage, Benefit for that matter any link on that page, It takes users to Folder selection page of guided procedure to select the process.
    The question is that is it suppose take a user to respective guided procedure as First Day or etc. rather than asking user to select the guided procedure process from folder.
    Thanks,
    Guest user
    Edited by:  on Mar 21, 2008 12:40 AM

    If default configuration takes to actual process that make us feel we are missing something in configuration.
    Lakshmi, Do you have any clue as what is missing to be configured since it is taking us to folder selection page?
    Thanks for your help,

  • Guided Procedures Life & Work Events Help Needed

    Our HR Department recently saw an SAP demo of the ESS Life and Work Events, which uses Guided Procedures.  We are now struggling with the decision to use Guided Procedures for the On-Boarding or if this same type of functionality can be delivered with HCM Processes and Forms.  The biggest draw for the Guided Procedures is the u201Cchecklistu201D type delivery.  Does anyone know if it would be possible to use HCMPF and have a similar u201Cchecklistu201D that the new hire can work through.  I heard somewhere that SAP is moving away from recommending the use of Guided Procedures and is instead recommending using HCMPF.

    did you follow this http://wiki.scn.sap.com/wiki/display/ERPHCM/Reusing+ESS+Java+applications+in+ESS+ABAP+Role?original_fqdn=wiki.sdn.sap.com As such work events are not delivered as such in new releases, you can reuse it however,check above.

  • Dynamically adding a repeating subform is not working in Guided Procedures

    Hi,
    I created an Adobe XML form file (.xdp) with a button and a subform. In the button click event I wrote javascipt to add a new subform. This is working fine from the PDF preview with in the Adobe Live Cycle Designer. 
    Then I used this template in an interactive from Callable object and generated a PDF from the server. The button click is not adding a new subform from this PDF. What could be the problem? Do I have to enable something on the server side?
    Thanks
    Ram

    the credential file is a certificate that Adobe creates allowing different kind of hidden features in Reader. Now as far as I remember a dynamic AND interactive PDF like ability to add/delete rows to a line items table on a PDF requires certified forms which is a special certificate not the one offered for free by SAP for
    - interactive PDF
    - non-interactive PDF
    - dynamic AND non-interactive PDF
    Maybe Matthias Zeller from Adobe or Markus Meisl from SAP in the Interactive Adobe Form forum can tell you where to get that special key

  • PCUI frame work please guide procedure to create field group varient

    hi ,
    I am eagerly waiting for the steps to create field group varient.
    i will appreciate a small help also.
                                                                   With Regard's,
                                                              Sunil Kumar.Bethinedi

    can any one give sumirized steps for calling an url by clicking a custom button on pcuiframe work.
    When i click a custom button in one of the application that call the url (webdynpro ) application .
    please give some summarized steps.
    i will appreaciate that help
    Edited by: sunil kumar on Jan 30, 2008 10:49 AM

  • How to make attachments work in Guided procedures

    Hi,
    I have created a simple application in GP where there is an input and the same user can see the output.During the process we can see an attachment symbol. when i attach a file and send it the other screen or the other user doesnt recieve that attachment. why is it so..and how can i send attachments during process

    Attachments need to be configured at a high enough level that they flow through the process.
    See help at: http://help.sap.com/saphelp_nw04s/helpdata/en/de/e4544262fe1f56e10000000a1550b0/frameset.htm
    -Cindy

  • Life Events - P&F Replacing Guided Procedures (GP)?

    Hi,
    I have seen that SAP replaced some of the Life and Work Events Guided Procedures with Processes and Forms. Is this the direction that SAP is going? I am asking so that we will develop any customer specific LWE's with the appropriate technology.
    Thank you,
    JP (Jari) Sallasvaara

    I found that SAP is replacing Guided Procedures with a new product.

  • Life Events - P&F Replacing Guided Procedures

    I have seen that SAP replaced some of the Life and Work Events Guided Procedures with Processes and Forms.  Is this the direction that SAP is going?  I am asking so that we will develop any customer specific LWE's with the appropriate technology.
    Thank you,
    JP (Jari)

    I found that SAP is replacing Guided Procedures with a new product.

  • Life and work event for any country other than US.

    Hello,
    I have to implement ESS for UAE.
    In ESS we did all country specific settings and thus our "Address" application in Personal Information section is working fine now.
    Now we have to implement the life work event section "My first days".
    There we are getting "Address" application in left panel.
    Now when I am clicking in this application it shows me error :
    Country/Structure do not match application country
    So which means it requires some settings in guided procedure end in portal.
    I am assuming ....Because our address application is already working fine in Personal Information section so same should also work in My first days section using existing configuration settings of R/3.
    So I went through below wiki page :
    http://wiki.sdn.sap.com/wiki/display/profile/LifeandWorkEvents(LWE)-Other+Countries
    In the above page there is a section to update parameters in guided procedure process for address.
    GP Context = X
    PT Family Service = EMPLOYEEPERSINFO_FAMMEMBER_PT_05 - this parameter is going to be created in the backend (transaction PTARQ)._
    I am making changes to existing Life and Work events - US only. (for testing purposes)
    In my case I only updated the Address service :
    sap_xss_service
    sap_xss_menusrv
    With the address service from R/3 which is in my case running under personal information section.
    But still I have been receiving the same error under My First Days address section.
    In the above wiki page there is a line as below :
    VERY IMPORTANT: the parameters need to give in action, after in the block, after in the main block, and after in the process (THIS IS CRUCIAL).
    I feel this is where I am missing something.
    What does this line mean...
    Can anybody help me out with the same...if you have implemented life and work event for any country other than US.
    Edited by: Saurabh Agarwal on Apr 10, 2011 3:03 PM

    Hello,
    In continuation of my question I have also been following below sap Note :
    929447 - Adopting Life and work events for countries other than US
    In the above note there us a section which confuses me :
    Page 3 - Home and Area page customizing
    Step2 - In this step they say that we have to make an entry in
    IMG node access: Cross-applicaiton components -> Homepage framework ->Services -> Define Country-Specific Services (Add Entries) - (Table:V_T7XSSSERSRVCG)
    as
    Service Key:EMPLOYEE_LIFEWORK_FIRSTDAYS
    Country grouping: 01
    Link Resource:EMPLOYEE_LIFEWORK_FIRSTDAYS_DE_SERVICE
    I believe it should not be for FIRSTDAYS....it should be about service which is actually throeing the error "Countr/structure does not match"
    i.e. in this note case it should be :
    EMPLOYEE_PERSINFO_ADDRESS05

  • SAP Workflow vs. Guided Procedures

    Hello experts,
    could anyone explain the differences between SAP workflow and Guided Procedures???
    I know that workflows are just compatibel with a ABAP Stack. Is there a document which compares both process technologies???
    Can I use CAF for SAP workflow???
    Can I use the Visual Composer to create the UI for a workflow???
    Thank you very much
    Regards
    Marco
    Edited by: Marco Gennari on Aug 28, 2008 4:25 PM

    Hi Martin!
    Because my tutor and my professor want to know, if it's possible to start a GP-process from SAP WebFlow automatically if a certain step is reached in WebFlow.
    I have a process as an example and in that process company A works with Workflow and company B, who is responsible for maintenance of a machine works with Guided Procedures.
    When a machine is damaged a Guided Procedure process of company B should be started and after reparing and end of GP the SAPWorkflow should continue.
    The normal way via iporting a WSDL file isn't possible because SAP WebFlow doesn't support SOAP Binding which is necessary for Guided Procedures.
    However in Guided Procedure it's possible to create an URL of a process instantiation. And if you call that URL in your Browser with parameters "process.template.id = xxxxx" and "process.autostart=t" the process will be started automatically.
    So for the first, I just want to call the URL from SAP WebFlow to trigger the GP process. (the handler customizing is done correctly) So I thought with transaction "wf_extsrv" it's possible if you refer to the URL of the process instantiation with process.template.id and process.autostart=t.
    Then generate a task and start the GP-process with the activity referring to the task. That would be a first step to show if it's possible.
    If yes.
    Then I can attend to pay attention to the export and import parameters.
    Can you follow me?
    I hope so.
    I think that post is much too long.
    If you want I can write you my ideas exactly via email.
    null

  • SAP Workflow to Guided Procedures

    Hi Gurus!
    Is it possible to start a browser with the URL of a Guided Procedure process instantiation form SAP WebFlow to start the Guided Procedure process automatically?

    Hi Martin!
    Because my tutor and my professor want to know, if it's possible to start a GP-process from SAP WebFlow automatically if a certain step is reached in WebFlow.
    I have a process as an example and in that process company A works with Workflow and company B, who is responsible for maintenance of a machine works with Guided Procedures.
    When a machine is damaged a Guided Procedure process of company B should be started and after reparing and end of GP the SAPWorkflow should continue.
    The normal way via iporting a WSDL file isn't possible because SAP WebFlow doesn't support SOAP Binding which is necessary for Guided Procedures.
    However in Guided Procedure it's possible to create an URL of a process instantiation. And if you call that URL in your Browser with parameters "process.template.id = xxxxx" and "process.autostart=t" the process will be started automatically.
    So for the first, I just want to call the URL from SAP WebFlow to trigger the GP process. (the handler customizing is done correctly) So I thought with transaction "wf_extsrv" it's possible if you refer to the URL of the process instantiation with process.template.id and process.autostart=t.
    Then generate a task and start the GP-process with the activity referring to the task. That would be a first step to show if it's possible.
    If yes.
    Then I can attend to pay attention to the export and import parameters.
    Can you follow me?
    I hope so.
    I think that post is much too long.
    If you want I can write you my ideas exactly via email.
    null

  • Reg: Guided Procedure

    Hi,
    I am new to work with guided procedures. I had tried some sample application form SDN. When i try to trigger new process, it is fine and i am able to see the action items in the UWL of respective users. But when i click on that action, it is giving me error "Could not retrieve process instance: Contact system administrator". Kindly suggest me what could be the problem.
    Thanks,
    Prasanthi.

    Check the below notes
    SAP Note 1026119 Error by opening GP work items from UWL
    SAP Note 1104652 UWL-GP configuration xml file
    Raghu

  • CMDM using Guided Procedures

    Hi All,
    Can anybody help me with the list of files and their versions that needs to be deployed on the server to start working with Guided Procedures??
    We are working on MDM 5.5 SP06 Patch 2. Please provide me the details regarding what all files are required on the Portal side to start working with Guided Procedures??
    Has any one worked on something similar then please help...
    Regards,
    Becky.

    Hi Jitesh,
    I think you din't get my question properly. My question was, for enabling Guided Procedures on Enterprise Portal there are some installations that needs to be made on the portal server.
    I am not very sure what all installations needs to be made before starting to work on GP.
    Any help??
    Regards,
    Becky.

Maybe you are looking for