Lifecam HD-3000 Drivers only

Does anyone know how, on a large scale, to only install the drivers and leave out the lifecam software? We have roughly 300 of these to deploy and have already grabbed the drivers only from the install but when you plug the camera in it still
tries to go install the software. We do not want to turn off all windows update driver installations.

Hi,
I just would like to know how you grabbed the driver from the installer.
The installer I can find is below, and I can't find the driver file like inf file after unziping it:
http://www.microsoft.com/hardware/en-in/p/lifecam-hd-3000#support
And it's just a web installer, it was installed with downloading at the same time.
I don't think the driver can be seperated from the software installer.
I agree with Pranda, let us know how you grabbed the driver out.
To manage the device and make it work fine, we have to install the software.
Kate Li
TechNet Community Support

Similar Messages

WIN 8.1 and MICROSOFT LIFECAM HD-3000 compatibilty - Preview screen "blacked-out"

It seems that there are hundreds of Users with Webcam issues since WIN 8.1 has been downloaded. I have trawled sites and Forums for procedures to ensure that my LIFECAM HD-3000 will work otherwise it a waste of £14.99. No solution has worked. Drivers and
software have been re-loaded from official MS site, and/or Safe Starts undertaken, and/or uninstalling and then re-installing and nothing works.
I think that the problem is that the CAMERA APP built-in with WINS 8 or 8.1 is "always on" in the background and stops other programs/programmes using the webcam output. Is one definitive answer to get webcams working in WINS8.1. Even the MANYCAM
software fails to work with WIN8.1.
Help. Thank you.

Hi,
This could be driver issue. Please contact the manufacturer to ask for the latest driver for your Webcam in Windows 8.1, and reinstall it to check the results. If there is not, we need wait for the updates from manufacturer.
Meanwhile, to use webcam, we need to get it properly set.
Set Windows 8.1 Apps that May Use the Webcam, Microphone & other devices
http://www.7tutorials.com/set-windows-81-apps-may-use-webcam-microphone-other-devices
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
Hope these could be helpful.
Kate Li
TechNet Community Support

Why can't skype identify my camera - "lifecam HD-3000 microsoft ?

why can't skype identify my camera - "lifecam HD-3000 microsoft ?

Hi,
I would recommend you to perform the steps mentioned below and check if it helps:
1. Temporarily disable all the third party security programs and boot in
Clean Boot to exclude 3rd party factor’s effect.
2. Update your video card drivers and BIOS to the latest version.
Hope it helps.
Tracy Cai
TechNet Community Support

Lifecam HD 3000 problem

Hi Forum, I hope someone out there can help with this one. I have just installed a Microsoft Lifecam HD 3000 and when video calling, my guests can hear me but not see me yet I can see and hear them perfectly. The camera is supposedly configured for use with Skype and to enable video chat and video recording. Have I set things up properly or is their something further I need to do?
Mindarie22 (thats in Australia)
Best regards
Frederick

Ross-12 wrote:
I have exactly the same problem as described above. Microphone works well, I can see the person I'm talking to but they cannot see me. It works once then not again even though I can see myself when I go into options. When I check options during the conversation there no recognition of the cam in the camera box.
Can anyone recommend another brand of webcam, as it seems to me the driver software is faulty and if Microsoft are interested in fixing it I'll go elsewhere ?
Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Memory upgrade for Lenovo 3000 V200 - only 2Gb seen :(

I bought 2 Transcend DDR2 800 SO-DIMM modules 2Gb each to upgrade memory on Lenovo 3000 V200 notebook.
When I installed them, BIOS (and Windows) sees only 2Gb instead of 4Gb (i use x64 OS so no prob with OS here).
When I install one of new modules and original 1Gb that was in notebook initially - only 1Gb seen instead of 3.
I already checked that all memory modules are OK, both memory slots (if used only one) are OK too.
But when both slots used together only lowest volume memory module is seen.
BIOS update to latest awailable (6th release, ...60WW) didn't help.
In specification stated that this model support up to 4Gb memory but I can't force it to support even 3Gb, only 1 or 2.
Is it possible to do something in this situation?

Probably the Transcend memory is not compatible, it does happen.

Microsoft LifeCam HD-3000 crashes application on exit

Hello! Crash is reproducable on Windows 8 ( on Windows 7 can't reproduce ). I used slightly modified version of AvCAPWPF. Steps to reproduce:
Play any sound using WPF _before_ initializing HD-3000.
Capture some video with HD-3000 either with DirectShow or with Media Foundation.
Exit application and see this crash. It's not crashing always but quite often.
Please, can you give me some hints on this? I can give you the app if you want. If you capture video _before_ playing a sound everything is ok. If you play a sound using DirectShow instead of MediaPlayer everything is ok.
> ntdll.dll!TppRaiseInvalidParameter() Unknown
ntdll.dll!TpAllocWork() Unknown
KernelBase.dll!CreateThreadpoolWork() Unknown
RTWorkQ.dll!WorkItem::Alloc(class COsTPWorkQueue *,struct _TP_CALLBACK_ENVIRON_V3 *,void (*)(struct _TP_CALLBACK_INSTANCE *,void *,struct _TP_WORK *),void (*)(struct _TP_CALLBACK_INSTANCE *,void *,struct _TP_WAIT *,unsigned long)) Unknown
RTWorkQ.dll!COsTPWorkQueue::PutWorkItem(struct IMFAsyncResult *,long,__int64,unsigned __int64 *) Unknown
RTWorkQ.dll!CPlatform::InvokeCallback_NoPlatformLock(struct IMFAsyncResult *) Unknown
RTWorkQ.dll!COsTPWaitQueue::CancelWorkItem(unsigned __int64) Unknown
RTWorkQ.dll!CPlatform::CancelWorkItem(unsigned __int64) Unknown
RTWorkQ.dll!RtwqCancelWorkItem() Unknown
mfplat.dll!MFTEnumCache::FreeRegListener(void) Unknown
mfplat.dll!MFDeleteMFTCache(void) Unknown
mfplat.dll!CPlatformPools::ShutdownStart(void) Unknown
RTWorkQ.dll!CPlatform::FinalShutdown(void) Unknown
RTWorkQ.dll!CPlatform::Shutdown(void) Unknown
RTWorkQ.dll!RtwqShutdown() Unknown
mfcore.dll!CDevProxy::Shutdown(void) Unknown
mfcore.dll!CDeviceSource::Shutdown(void) Unknown
mfcore.dll!CMFDeviceSourceActivate::ShutdownObject(void) Unknown
CAL2.dll!00007ff893a85f7d() Unknown
CAL2.dll!00007ff893a35523() Unknown
CAL2.dll!00007ff893a3435d() Unknown
CAL2.dll!00007ff893a36f75() Unknown
CAL2.dll!00007ff893a4105c() Unknown
CAL2.dll!00007ff893a4115c() Unknown
CAL2.dll!00007ff893a3a7f3() Unknown
CAL2.dll!00007ff893a3adaf() Unknown
CAL2.dll!00007ff893a4066f() Unknown
CAL2.dll!00007ff893a3ad25() Unknown
CAL2.dll!00007ff893a36fc4() Unknown
CAL2.dll!00007ff893a7cc58() Unknown
CAL2.dll!00007ff893a7ce60() Unknown
CAL2.dll!00007ff893a7d0ee() Unknown
ntdll.dll!LdrpCallInitRoutine() Unknown
ntdll.dll!LdrShutdownProcess() Unknown
ntdll.dll!RtlExitUserProcess() Unknown
kernel32.dll!ExitProcessImplementation() Unknown
mscoreei.dll!00007ff8c0172d6f() Unknown
mscoreei.dll!00007ff8c0172ee8() Unknown
mscoreei.dll!00007ff8c0167cfd() Unknown
mscoree.dll!_CorExeMain_Exported() Unknown
kernel32.dll!BaseThreadInitThunk() Unknown
ntdll.dll!RtlUserThreadStart() Unknown

I think you need help from AvCAPWPF, I have no LifeCam now, so I can't help you to reproduce it
Best Regards,
Please remember to mark the replies as answers if they help

Need hardware drivers (Only!) for NI PCI-DNET card, P/N 184726E-11. Do not need Labview run-time, Silverlight etc.

I need to install just the Windows XP hardware device drivers for my PCI-DNET card, P/N 184726E-11. Ordered under P/N 777358-01, the card is boxed with an installation CD-ROM. CD-ROM is NI-DNET for windows Ver 1.6.7. When the install app runs, it is trying to install all sorts of stuff I do not need - Labview Runtime, Microsoft Silverlight, Development Support, Automatic Updaters, etc. This card is being installed in a "production" machine. We have our own software, already developed, that talks to the card via the O/S. The hardware/device drivers are most certainly on the CD-ROM, I just need them identified and instructions for installing them.
Thanks,
Ed

Thank yor for the reply. However, it is not what I am looking for. The suggested download is 406MB. That's everything but MS Silverlight and the kitchen sink - overkill for our needs. We only need to install the Windows system driver for the card. We do not need Labview RT and the other development/support stuff for this installation. We have our own communications software that talks directly to the hardware, via the windows system driver. I have the 1.6.7 software CD-ROM, and need to know where the Windows sytem hardware driver/driver installer is located and what is the preferred method for installing only the hardware driver.
Thanks,
Ed.

? Wireless Drivers - Only connects with Ethernet connection.

Hello!
Thinkpad Edge 0578 14 -
I have to reinstall win 7. Now the wireless won't turn ( I tried the wireless button already). Wired Will work.
troubleshooting I did and did not work:
- downloaded drivers from site http://support.lenovo.com/us/en/downloads/ds014964 put it on usb drive and transferred
- Click it update drivers device, did not work.
Device manager display:
On network adapters display the hardware is working: Realtek PCIe Family Controller
Other devices display: Network controller, PCI Data Acquisition and signal, PCI Simple communication and SMS Bus controller with a yellow mark - Drivers not installed.
PLEASE need your advise. Where i can find the correct driver what can i do to update it.
Thank you! Michael

Thanks for all the comments (most of them anyway :)). Since my first problem was that I couldn't identify what the thing is called, so I didn't get stuck with a transmit only device, I called Belkin. I was told that their product was a Wireless G Gaming Adapter (F5D7330). The rational was that XBox, etc. may not have USB ports, but they all have ethernet ports.
I then asked about my busted wireless adapter. She looked it up and said the replacement was due to be shipped out shortly. She then volunteered to switch the product to the Gaming Adapter (list price $100), so I said fine.
I then went to Amazon.com and looked up the reviews of the F5D7330. 80% loved it, 14% hated it, and the difference said they liked it after all the setup hassle.
BTW, all this started about 5 years ago when I bought a Belkin Wireless adapter for my PMG3. It looked like a mouse with one antenna sticking out. I got a rehab unit for about $20 ($70 new). It was bad, so 4 months later they sent me another one. It lasted a while and went bad, so they sent me the new one shaped like a stick of gum. It has now gone bad, so they are sending me the Gaming unit that looks like a mouse with antenna sticking out. Round and round. At least I keep getting the newest thing for my original $20 investment.
Mini(CD2), Imac(CD2), G5 PM Mac OS X (10.4.8)

Installing Printer drivers ONLY?

so... when i installed leopard i figgered i'd save some drive space by not installing ALL those printer drivers, just the hp's (i only ever owned hps). recently i inherited a brother hl 1440 (a monochrome laser). i went to the brother web site to find the driver, and the site says that the driver is on the leopard install disk.
so i went into the installer, and as far as i can tell, there is NO way to just install drivers without doing a re-install of the OS. i thought you USED to be able to quit the installer and just find the package, but leopard doesn't seem to allow that anymore.
any ideas on how to get the brother drivers off the leopard install disk??
TIA

Here's the driver for 10.4, which you could try to see if it works:
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/002100/d lf002189.html?reg=us&c=us&lang=en&prod=hl1440_all&type2=1&os=26&flang=4&dlid=dlf 002189
My guess is that it should work fine, especially since it's the CUPS driver, which is an open source driver that's not platform-specific. CUPS is built into 10.4 and 10.5.

Killer's network drivers only [without software suite]

>>Killer_E220x_Wireless-N_INF_Win7_Win8_Win8.1.zip<<

Okay. I see the confusion. He is using the drivers that Svet recommended. Which are slightly newer than your own, but are also without the Killer Network Manager and must be installed manually. (10.0.1.263 for the Wireless and 8.0.2.42 for the e2200)
My issues with the wireless seemed to go away with Svet's drivers - which was essentially a newer download pinned to the forums of what Warner gave to you. He could give Warner's a try but they basically are the same. I assumed my issue didn't go away as I was having another BSOD issue that didn't exactly specify which device was causing the BSOD.
As for my issue - I have uninstalled the Logitech software and haven't had a crash within the past day and a half. I noticed the longer I have the laptop on, the more likely the BSOD. So, I am leaving it on all day playing games off and on.
I did notice that SetPoint does install software that is meant for keyboards. Simply because Logitech has a unified driver suite between their mice and keyboards able to use a single wireless dongle, eliminating the need to use one for each device. This could, in theory, be causing an issue with the MSI SCM. Most people think of the SCM as a control app, but it also installs a service (called Micro Star SCM) which handles event communication between several different driver packages/software. This is why when the SCM is uninstalled, the keyboard light manager fails to start up as well as Hybrid Power and a few other MSI apps. If uninstalling the Logitech software does work, then it could be that the keyboard manager in SetPoint is intercepting events that should be going to the SCM service.
If it crashes again, I will swap out the mouse itself. I'll update my thread on this issue on the next crash or in a few days if I have no further issues. I'm crossing my fingers and thanks for the tips.

Microphone on Lifecam VX-3000

Hiya,
Does Mac Mini support the USB microphone on VX-3000? Maccam gets the video bits to work,
however, not the sound input...
Thanks!
E.

Ah, I forget to mention, there is a "USB camera" at sys pref/sound input, yet it doesn't seem to work...
Cheers,
E.

Restoring OS and Drivers ONLY

I want to use DriveScrubber 2 to wipe down my entire hard drive and reload the OS and drivers. I have a Satellite R25-S3503, and was able to successfully perform the operation on my girlfriend's Toshiba laptop. However, in re-loading the OS and Drivers from the recovery disk, all the other programs (trialware and freeware) were re-loaded also automatically without option given. When I reload my system, I don't want this information on there. How can I reload the OS and Drivers from the recovery disk without all the other junk? Thanks - Steve

No. The recovery disk contains an image of the hard drive as it came from the factory, and a program to write this image to the hard drive. This, by design, puts everything, including all of the 'junk' you refer to, back on the drive. There is no option to just install 'bits and pieces'.
You can try the PC Decrapifier - http://pcdecrapifier.com/ - to remove much of what you object to.

Lifecam Hd 3000 not working with skype

I have a new Surface pro 3, (Microsoft) and a new HD3000 camera (Micorsoft) It works on the screen but when I use it with Skype (Microsoft) whilke it shows up in the set up, the program will not allow me tro send a video message,

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Microsoft LifeCam VX-3000 not supported

Since upgrading(?) to Win8, my webcam not longer works with skype. I have tried every possible option, including using the Microsoft support desk to see if there is a compatible driver for this camera. Apparently it is not supported by Microsoft (at this time ... and probably won't be). The same thing happened in "upgrading" to Win 7. I'm not willing to give up yet and buy another camera. Anyone experiencing the same problem? Is there any other solution?

You are very welcome.
Sorry, i have no idea. Please See this thread:
http://community.skype.com/t5/Windows-8/Webcam-not-working-Check-here/td-p/1161082
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Re: Apple AirPort drivers only support a WEP key index of 1

This article may be published at Apple's leisure.

Are you entering the WEP key in ascii (just a word) or hex pairs? If you were using ascii, try switching to hex pairs and see if that works (just click the menu in the password window and it should appear as something like "128 bit WEP hex"). I know you said the password is correct, but if using ascii, sometimes the keys don't match on the router and computer (or something like that), so the router thinks the password you gave is wrong. When this happens for me, it just cites "problems joining network" or something similar, rather than citing an incorrect password. Hex pairs bypass this problem.
Also make sure that you are using the same bit encryption as your router, so 64 or 128 bit WEP, when you enter it.

Lifecam HD-3000 Drivers only

Similar Messages

Maybe you are looking for