Lifecycle for SD project

Hello Gurus,
please what is the steps and details for lifecycle of SD project? or please show me where I can find relevant document for that?
Many thanks,
cindy

post from the last user in the below link will make you understand process/roles/steps well.
sap SD implemtnation issue
Regards

Similar Messages

Do we have a separate forum for SAP Project Systems?

hi
do we have a separate forum for SAP Project Systems?
regards
kish

hi all
i got the answer
its the PLM forum ie. product life cycle management
Expert Forums » SAP Solutions » Product Lifecycle Management (PLM)
cheers
kish

Manual creation of Project Site for a project is taking old project site template.

Dear All,
I have modified the project site and save it as a template to associate it with an EPT so that the modification will reflect in new project sites.
For existing projects, I am deleting the old project sites (after taking backup) and recreating so that new modifications will be there for existing projects and I am able to do so.
But, for 1 of the project, when I have deleted the project site and recreated, still it is taking the old template (i.e. new modifications has not been seen).
Kindly advice in some areas so that I can jump in and around and can find out a solution so that the project site will take modified project template.
Example to get the issue in an easy way:
ProjectA:
Project Site: http://epm/pwa/ProjectA
Issue List:
Column: Category [data type as Choice: Cat1, Cat2, Cat3]
Have saved 1 project site as a template and associated with an EPT with the following changes:
Column: Category [data type as Choice: Choice1, Choice2, Choice3]
Then, deleted the project site: http://epm/pwa/ProjectA and recreated.
So, it should take the modifications in the project site.
But, it is showing as Column: Category [data type as Choice: Cat1, Cat2, Cat3].
Regards,
Shravan

Dear Guillaume,
Thanks for your response.
Please seem my comments inline:
Which Project Server version do you use?
PS 2010
It is working well and as expected for all projects except for 1 specific project?
Yes. It is working well for other projects except 1 project.
Has this project something particular?
Nope. It is similar as other projects.
How do you proceed to create the new project site? Do you go to the site actions, then new site and pick up your new template?
First I have modified 1 of the project site and saved that site as a template.
Then, I have deleted the existing project site (from Project Sites under Operational Policies) and recreated so that project site will gets created from the new template. But, it's not happening.
Regards,
Shravan

Provident fund configuration for coal project

Dear all
my requirement is to maintain pf rates for our coal mines.we have already maintained pf rates for our organization i.e plant .but now we have created new pf id for coal project.and we have different calculations for coal project employees whom we have assigned new pf id.
ex:empcode 102184
    pa30->infotype->587->Provident Fund Trust ID (Now its RCMP) from macrh 01.2014
    pa30->infotype->587->Provident Fund Number (New pf code number)   ex-YZZZZ
before this we have
   pa30->infotype->587->Provident Fund Trust ID (Now its RPCL) from macrh 01.2014
    pa30->infotype->587->Provident Fund Number   (old different pf code number) ex- XTRYY
A/C Number
Emp Name
EMP CODE
S/W
salary
PF CONTRIBUTION (12%)
PENSION CONTRIBUTION
VOL. CONTRIBUTION (2%)
TOTAL ADDI. PENSION CONTRIBUTION (ONE INCREMENT DIVIDED BY 12 MONTHS )
ADMIN. CHARGES (3%)
Employee (10.84%)
Employer (10.84%)
Employee (1.16%)
Employer (1.16 %)
CMPF/123/456
XYZZZZZ
1102184
173,830
18843
18843
2016
2016
3477
2188
1252
how can i configure these in my system.
we have already differnt calcualtion for RPFC emp of our company.
please guide .
thnxs
gaurav

i have done it with separate trust id-RCMP.but i have assigned same wage type as i did for older one.(RPFC case).should i need to create new wage type and create PCR for separate pf trust id.
trust master details:pleas tell me .what to do for this issue and how it can be resolved.
RCMP
CMPF
RPFC (Regional Provident Fund Commsioner)
/3F1
/3F2
/3F3
/3F4
/3F7
/3F8
/3F9
RPFC
RPFC Govt
RPFC (Regional Provident Fund Commsioner)
/3F1
/3F2
/3F3
/3F4
/3F7
/3F8
/3F9

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media.

Searching for a Project status = CLSD and open purchase orders?

Hi,
I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
This staus should allowed to process with open orders BUT not allowed to add new orders after setting this status.
Have somebody any idee? Or it is impossible?
Tahnk you in advanced for your Help.
Regards Baldy

Hi TV-kid,
while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
To whom shall I write?
Thanks
Cheers
Cheers

Can you use SQL as a data source for a project in the same way you can in Excel?

Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
the data from the stored procedure as a series of tasks?
Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

No, You can not use sql as a data source for a project.
You have 3 options to achieve it:
1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
kirtesh

Report for Goods Issued for a Project

Dear Friends,
I want a report for a goods issued for a project.can any body convey the T Code Please...
Regards,

use mb51 and select q-special stock and enter wbs no. for which you want to see the details.
if you have more than one wbs then also you can paste no.s of wbs in mb51
regards

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

Final Cut won't open for a project

I can open Final cut Pro HD But I cannot open my project After adding 10 Livetype titles. Every time I try to open the project the application crashes at 13% of reading the project. I can open other projects but not this one. The Project is only 30 minutes long. I Tried going into my library and deleting the Com apple final cut pro plist and the data folder but it did not help. I also deleted the livetype titles that I created off of my hard drive and I have have the same problem. Does anyone Know how to delete Livetype titles from a project without openng Final cut pro or how to resolve this problem. Please Help.

Should I delete all of the render files for that project. One thing that I did do, since I worked on the project from my G4 laptop on a Lacie External drive, I tried opening the project up on my g5 desktop computer where there was no render files and the project still would not open. Is there any kind of way to delete livetype titles from the project without opening it.

How Do I Use a SINGLE Custom CSS for My Project?

How do I set a single CSS for a project?
Currently, I have linked (I checked, they are actually linked) FM files. The project is Responsive HTML 5 Single Source Layout. It is set up this way:
Project Files
Each FM file has a folder that contains a CSS, an FPJ, any baggage (PNG, for example) and an HTM.
So, for my project, I have 31 such folders.
Above them is RHStyleMapping.css.
That's it
To map my project to a custom CSS, I did this:
1) Created the custom CSS (let's call it TheSingleCSS-sb01.css) and put it in the same location as RHStyleMapping.css.
2) Right-clicked Responsive HTML5 (Primary Layout) in the Single Source Layouts pane.
3) Selected Properties. The Responsive HTML5 Properties dialog box opens.
4) Click Content, select the Apply to all Topics check box, select CSS, and choose my CSS, TheSingleCSS-sb01.css.
5) Click Save and Generate. Generating happens.
6) When prompted, click View Result.
7) Double-click one of the resulting topics, and choose the HTML tab.
8) Notice the following CSS files are referenced, NOT the one I want:
<link rel="stylesheet" href="Configuration_ChangeWorkflow.css" type="text/css" />
<link rel="stylesheet" href="..\..\RHStyleMapping.css" type="text/css" />
<image>
So:
1) How can I replace 32 individual CSSes with one single custom CSS?
2) Also note that Project Manager does not display my custom CSS, even though it is in the same location as RHStyleMapping.css and referenced in the Properties dialog box.
Thanks all,
Sean

Hi, so as I mentioned before, I have used Apply to all and this doesn't work. The resulting HTML still uses a specific CSS for that one HTML file.
1) I put the CSS I want to use, Sean01.css, in the top level of my project using Windows Explorer.
2) I Save and Generate.
3) But, my settings for styles in the CSS are not used. For example, FM_GlossaryDefinition is defined with a 0 left indent but actually uses a 144pt indent (that mirrors the print FM document and that I do not want).
4) And, you can see from the actual HTML, that the Sean01.css file that I applied to all topics (see the first image) is not referenced. What am I doing wrong?
What am I doing wrong? Again, these are imported FM files; this is not linked.
Thanks,
Sean

[svn] 3120: When you point Flex Builder at a local sandbox trunk build, it couldn' t generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build

Revision: 3120
Author: [email protected]
Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
Log Message:
When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/webapps/webtier/build.xml
Added Paths:
flex/sdk/trunk/templates/client-side-detection/
flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection/index.template.html
flex/sdk/trunk/templates/client-side-detection-with-history/
flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
flex/sdk/trunk/templates/express-installation/
flex/sdk/trunk/templates/express-installation/AC_OETags.js
flex/sdk/trunk/templates/express-installation/index.template.html
flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
flex/sdk/trunk/templates/express-installation-with-history/
flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
flex/sdk/trunk/templates/express-installation-with-history/history/
flex/sdk/trunk/templates/express-installation-with-history/history/history.css
flex/sdk/trunk/templates/express-installation-with-history/history/history.js
flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
flex/sdk/trunk/templates/express-installation-with-history/index.template.html
flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
flex/sdk/trunk/templates/metadata/
flex/sdk/trunk/templates/metadata/AC_OETags.js
flex/sdk/trunk/templates/metadata/readme.txt
flex/sdk/trunk/templates/no-player-detection/
flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection/index.template.html
flex/sdk/trunk/templates/no-player-detection-with-history/
flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
Removed Paths:
flex/sdk/trunk/templates/html-templates/

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
Sander

Hi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How to add a new tab for the project?

Dear All Experts,
    Could you tell me how to add a new tab for the project?
    Pls refer to the screenshot as below:
Thanks!
Xinling Zhang

Hi,
    The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
    And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling

Can you spot any glitches in this workflow for my projects

I have been going back and forth on this topic of what format to use for my projects and have proposed various solutions which have not worked out because of some issue I overlooked. After much thought and a lot of reading, I came up with this one: I want to produce dvds for computer viewing only, using FCP HD and DVDSP 3. I'm using graphic sources ONLY, created in Motion 2 and Photoshop CS2 with music files created in Logic Pro 7, no footage. I plan to use the DVPro HD 720p 24 for the format in FCP and Motion. Since I am not using captured footage in the projects, I thought I could use just the portion of the area of the 720p screen that I would need for DVD output, which is 720 x 480, by marking it off with guides. All of the graphics from Photoshop and Motion would be brought in at the regular 720p dimensions but the content would be only in the same 720 x 480 area of the screen. When the project is done I would export it as a Quicktime movie at full size and bring it into Compressor 2. I would then use the setting for preparing it for DVDSP but I would crop the size to just that same 720 x 480 area where I limited my content. My hope is that because the dimensions are those for NTSC DV, that my pixel aspect ratio will remain square and not getsquished, and with progressive scanning it will look fine on a computer screen. Does this plan sound like it will accomplish the result I'm looking for?

The lumina shifts out of the wipes are a result of the H.264 encoding...it isn't on the original footage. I can't figure that one out...I tried exporting out of FCP, converting with QT AND Compressor and got the same result. Scratching my head there...
The 3-way CC was good in many cases, but when it came to the marsh grasses, it had some difficulty. Mainly in separating the blues and greens, and getting rid of the general haze of the shot. MB and CF were able to dig out the colors, but yes, Magic Bullet had more...vivid sepiad colors. That is a result of using the Color Reversal template and futzing with it, and my inexperience with MB. Color Finesse was much more familiar to me, and I was able to get STUNNING results. This is why I chose that shot for CC, because it appeared to need the most work.
I was able to get better results with the 3-way with other footage. Most of the other footage was shot with a distinct blue tint to it, but that is easily fixable.
I don't fault my DP too much. I asked for test footage to play with, and he did a days work, on his own time, for me to work on. The other stuff I was previously working on was for a project I am just wrapping up, and the footage was not allowed to be posted.
All in all I feel this footage has a very cinematic feel. It is easy to work with at full resolution, doesn't take up all that much space and very very pretty to look at. The big issue that will arise is the fact that the 23.98 timeline offers ONLY NDF timecode...not DF. I have to deliver a 59.94 d5 at 10-bit uncompressed, and that allows for DF, but my timing will have to be adjusted. Just how it will is something I will be exploring as the projects plods on.
Shane
"There's no need to fear, UNDERDOG is here!"

Lifecycle for SD project

Similar Messages

Maybe you are looking for