Lifelog is not registering as it should

The last days, lifelogs registrates my cyclings as driving and also my walking. This isn't correct.What could be reason of bad registration? Thank you for your comment.With kind regards, Ilse

 Settings > location > how accurate is your GPS?

Similar Messages

  • Working w/adobe cs6 - it now won't update adobe acrobat. Adobe found that I am not registered in a sudoer file and said that I had to call Apple. They said I should submit it to this forum.

    I have installed Adobe cs6. After doing so, Adobe Acrobat will not update. I have been trying to solve this problem with Adobe now for 3 months. Today they say they discovered that I was not in a file named "sudoers file." They told me they could not solve that but that I had to call Apple for a solution. I called Apple and they told me that they could do nothing about it (I'm still not sure whether or not they even admitted that it is one of their files). They suggested coming to this forum for a solution.

    Their latest is that my file is not registered in sudoers, whatever that is
    There are two files named sudoer.vim on my drive (each in a different folder). They're text files. Both are very well hidden and the contents of either would mean little to anyone not versed in terms used in the text. What Adobe could possibly mean by "your name not being in the file" is anyone's guess. My actual name or user account name isn't in any of the files, either, and my apps work just fine.
    There is another text file named sudoers (no file extension) that appears to be a list of who has sudo privileges. But again, it's well hidden, requires an admin password just to open it, and means nothing without knowing what to modify, or how without ruining the file.
    Which kind of leads back to this:
    "Adobe Acrobat application was modified."
    Have you run Monolingual or other utility that removes foreign languages from the drive? If so, you can't let it touch certain apps (like anything from Adobe) or you will run into problems like this. Usually, Acrobat won't even launch if pieces of it have been removed, even if those pieces are completely unimportant.
    If nothing else, just reinstall Acrobat from the original disk or downloaded .dmg purchase.

  • My I phone got stolen in Cuba and I did not register the phone with the apple.what should I do?

    My I phone got stolen in Cuba last week,and I did not register it with the apple. Is there
    any thing I can do?

    no. not unless "find my iPhone" was installed before it was stolen.  If you were visiting Cuba abd are now back home in another country you have no hopes of recovering it.

  • Gateway error - Program not registered

    Hello,
    We were getting the following error while doing a "Connection test" of a TCP/IP RFC destination:
    LOCATION    SAP-Gateway on host gisrxx / sapgw00
    ERROR       program SBCX not registered
    It's an ECC 6.0 system.
    I found SAP note - - 353597 - Registering a RFC program
    I executed the following command as sidadm
    rfcexec -aSBCX -ggisrxx -xsapgw00
    But the command keeps on running on teh command prompt.
    And for that duration the RFC works.
    But after sometime the command ends and comes back to command prompt and the RFC doesn't work any more.
    Could you tell what needs to be done to resolve this issue?
    Regards,
    Gautam.

    Hi Gautam,
    Please run the program in background (Unix) or as a service (Windows).
    Please go through the following forum post. This should help.
    Run rfcexec as service on windows
    Br,
    Venky

  • Error 'Program not registered' while testing RFC

    Hi
    I have created a RFC with type T. When I am testing the same through SM59, I am getting error:
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: program <program name>not registered
    Error Details     LOCATION: SAP-Gateway on host xxxxxx / sapgw01
    Error Details     DETAIL: TP <program name> not registered
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 6268
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1694
    Error Details     RETURN CODE: 679
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Tue Jan 27 00:56:55 2009
    Error Details     VERSION: 2
    Can anybody help me in this?
    Thanks in advance

    Something helpful related to this
    The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
    To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
    rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
    rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
    The connection will fail once this command is terminated or the user executing this command logs off
    To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
    To do this, execute the following command
    sudo su - <sid>adm
    rfcexec u2013D<destination name>
    <destination name> is the RFC destination name in SM59
    So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
    In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered)

  • Error 'Program not registered' while testing RFC - SRM to MDM / TCP/IP conn

    Hello All,
    While testing RFC connection in SRM, we are getting this error. This connection between SRM to MDM. Any inputs will be highly appreciated.
    Error Details LOCATION: SAP-Gateway on host <hostname> / sapgw<instance no>
    our server OS : windows 2008 server
    We are getting error while doing connection test in SRM.
    This is sm59 connection (TCP/IP ) connection.
    Connection Type: T / RFC destination Name: MDM_API_CATALOG
    Registered server program: hostname.MDS
    I checked smgw transaction ..Logged on clients...Program id is not showing. Any hint will be helpful.
    I Checked this MDM setup also.
    MDS setup
    In mdm server go to folder F:\usr\sap\DM1\MDS00\config
    Open MDM.ini file in notepad
    Add the below 2 entries.
    SAP RFC Gateways= GWHOST=XXXX.hostnamexxx.xxx GWSERV=sapgw00
    Trusted SAP Systems= XXD
    This will enable gateway connection between SRM and MDM and will enable trusted connection.
    For trusted connections to work, we created a service user called SRM_MDM_API with SAP_ALL in SRM  and also created the same user in MDM with Default role.
    Error message:
    Logon  Connection Error
    Error Details    Error when opening an RFC connection
    Error Details    ERROR: program XXXXXXXXPRD.MDS not registered
    Error Details    LOCATION: SAP-Gateway on host XXXXXXXXprd.xx.xxxxxxhostname.xxx / sapgw00
    Error Details    DETAIL: TP XXXXXXXXPRD.MDS not registered
    Error Details    COMPONENT: SAP-Gateway
    Error Details    COUNTER: 77326
    Error Details    MODULE: gwr3cpic.c
    Error Details    LINE: 1778
    Error Details    RETURN CODE: 679
    Error Details    SUBRC: 0
    Error Details    RELEASE: 700
    Error Details    TIME:
    Error Details    VERSION: 2
    Procedure Tried
    1)  This procedure is for Linux OS - Similarly we tried in Windows OS ( If any procedure is wrong also, Please correct us)
    To register the program login into the OS level as sudo su u2013 <sid>adm and execute the following command.
    rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
    rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
    The connection will fail once this command is terminated or the user executing this command logs off
    2)
    To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
    To do this, execute the following command
    sudo su u2013 <sid>adm
    rfcexec u2013D<destination name>
    <destination name> is the RFC destination name in SM59
    In order to do above step 2,  we could not find saprfc.ini in windows 2008 server. Please let us know path where it will be usually?
    3) Already checked the notes sapnote_0000684841
    I know that it is generic error..This is happening to specific one of system only.
    Thanks
    Edited by: saptest2011 on May 20, 2011 5:36 PM

    Hello SM,
    Thanks for your quick reply.
    Thanks for sharing link for document ie Configure the MDM Administration_cockpit. It is helpful. I read that document.
    But still issue remain there.
    The same RFC connection works between SRM sandbox to MDM sandbox.
    Only issue with SRM Prod to MDM Prod (newly built system)
    difference between MDM Prod and MDM sandbox.
    MDM Prod runs: Windows server 2008 OS
    MDM Sandbox runs: Windows server 2003 OS
    Landscape: PI7.1, MDM 7.1 and SRM 5.5, SRM-MDM Catalog 3.0
    Even i did os01 tcode ping test using host name (specific IP address) from SRM prod to MDM prod, it is fine.
    Thanks a lot for your help.
    I checked these notes also
    Note 353597 - Registering a server program
    Note 44844 - No connection to registered RFC program
    Note: in smgw tcode in SRM system, the required program id is not showing in logged on clients
    Thanks
    Edited by: saptest2011 on May 23, 2011 5:00 PM
    Edited by: saptest2011 on May 23, 2011 5:39 PM

  • Program IGS.BW not registered  in IGS_RFC_DEST

    Hello,
    I want to enable Internet graphics display for my BW system for which i have already installed IGS on my system and created RFC Destination as IGS_RFC_DEST and entered relevant parameters,when i test this rfc connection following error message is displayed:
    ERROR        program IGS.BW not registered 
    LOCATION     SAP-Gateway on host BIWDEV / sapgw00       
    DETAIL       TP IGS.BWD not registered                  
    COMPONENT    SAP-Gateway                                
    COUNTER      18                                         
    MODULE       gwr3cpic.c   
    Can someone tell me wt might be the possible cause of this error and how to rectify it.Kindly revert at earliest.My Email Id is [email protected]
    Thanks,
    Saumya

    please ensure all the steps explained in the following link are followed.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/72d43ac66e1f08e10000000a114084/frameset.htm
    particularly you should use the same program ID used in IGS in the RFC destination.
    Regards
    Raja

  • Program ID not registered

    Hi,
    I am trying to test RFC connection but it is saying  " program ID not registered"  at gateway.
    I  registered in saprfc.ini file at gateway but still its not working.
    Please let me know if you have any idea where should I register it.
    Best Regards,
    Tushar

    I am not dure what is the setup you have in your env .
    To register a progid
    1.you have to have two separate applications
    say one is sap and second is xxx
    2.You have to register xxx applications prog id in sap.
    3.you have to have both applications up and running.
    4.It shall be a TCP/IP connection and register program id option in SAP system , define the gateway host and gateway service using sm59 .
    5.The application xxx shall have information about sap system.
    and then it works properly.
    Hope it helps.
    Amit

  • RFC error: SLD_UC program not registered

    Hello,
    I am having a problem connecting my Abap system to SLD.
    When I test the SLD_UC RFC connection, I get the error that the program is not registered.
    I did see other postings on this, but no real answers that I can tell.
    How can I troubleshoot the problem to get this program registered?
    Thanks
    Doug

    Hi Doug,
    Can you confirm the parameters specified under tab Technical setting --> Gateway Options(This should be your ABAP system gateway and host)
    Also check whether server name and gateway host you can see using tcode smgw.
    Hope this will help.
    -Pinkle

  • Showmount: new-host: RPC: Program not registered

    I always have problem shutting down my solaris system, anytime i issue the shutdown command i always get this error "showmount: new-host: RPC: Program not registered" and the system dows not shutdown instead reboots.
    bash-3.00$ su
    Password:
    # shutdown
    Shutdown started.    Wednesday, March  5, 2008 12:03:30 PM EST
    Broadcast Message from root (pts/3) on new-host Wed Mar  5 12:03:30...
    The system new-host will be shut down in 1 minute
    showmount: new-host: RPC: Program not registered
    Broadcast Message from root (pts/3) on new-host Wed Mar  5 12:04:00...
    The system new-host will be shut down in 30 seconds
    showmount: new-host: RPC: Program not registered
    Do you want to continue? (y or n):

    I think the shutdown command executes "showmount" as part of its execution process and if the nfs deamon is not running at that time, it produces this error. If you just execute "showmount", you'll see the same problem. Check this page:
    http://access1.sun.com/FAQSets/Solarisx86FAQs.html#14
    You should execute shutdown with some parameters:
    # shutdown -i0 -g0 -y
    -y : non-interactive shutdown
    -i0 : init state 0 (for shutdown)
    -g0 : grace period in seconds (0 for immediate, 60 by default)

  • Help with error program not registered CPI-C error CM_ALLOCATE_FAILURE_RETR

    I have the following connection error in SM59 ...
    Connection error        program ZCCCOM_NZ_PMH01 not registered / CPI-C error CM_ALLOCATE_FAILURE_RETRY. 
    I have deleted and re-registered the program but still no connection. Any ideas as to what/where I am going wrong would be fantastic!!
    RFC Destin = CCCOM
    Type = T
    Gateway Host = ntchsapqas
    Gateway service = sapgw00
    ERROR                program ZCCCOM_NZ_PMH01 not registered      
    LOCATION             SAP-Gateway on host ntchsapqas / sapgw00    
    DETAIL               TP ZCCCOM_NZ_PMH01 not registered           
    COMPONENT            SAP-Gateway                                 
    COUNTER              19364                                       
    MODULE               gwr3cpic.c                                  
    LINE                 1593                                        
    RETURN CODE          679                                         
    SUBRC                    0                                       
    RELEASE              46D                                         
    TIME                 Tue Jun 10 14:47:28 2008                    
    VERSION              2

    Something helpful related to this
    The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
    To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
    rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
    rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
    The connection will fail once this command is terminated or the user executing this command logs off
    To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
    To do this, execute the following command
    sudo su - <sid>adm
    rfcexec u2013D<destination name>
    <destination name> is the RFC destination name in SM59
    So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
    In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered)

  • You are not registered to use this service

    We have everything with BT including a new TV box with netflix etc, which is currently at the end of the 14 day cooling off period. If the following problem isn't resolved today I will be considering cancelling the TV contract and leaving BT all together.
    Our phone was working ok on the 15/4/2015. I tried to dial a local number last night (16/4/2015) to hear 'you are not registered to use this service please contact your service provider'. I dialled again with the area code, same thing. Also with national and mobile calls. We can receive incoming calls. I rang the Indian call centre who said there is no problem with the line or the account (which is in credit) it must be the handset. I am waiting for them to ring me back but having searched the problem online I think this will be to no avail. I have read about prefixing phone numbers with 1280 and this has worked when trying to ring my own mobile, so it can't be a problem with the handset, can it?
    I've seen it could be a problem with Indirect Access IDA being removed from my account (no idea how this might happen). I also know that there was a major outage last week (around 6/4/2015) in our area which led to the freeview HD channels not being available. I had to reset our router which cleared the problem but were Openreach in our area doing something to the exchange boxes etc?
    I need this problem sorting out A.S.A.P. please.

    The fact that if you use 1280 it allows successful calls suggests your line is set as CPS , carrier pre select, if this has just happened it suggests a CPS provider has taken your 'line' for calls if not for line rental, but it's not properly set up otherwise calls would terminate it would just be billed by the mystery CPS provider
    Have you had any approach by company's that sell this product ?, sometimes ISP's who's product includes calls can use CPS, if not, and you haven't been 'slammed' you need BT to set your line as non CPS , so BT handle your calls automatically without using 1280
    This should be easy to get done, but the drones that answer the calls probably won't have a clue, hence the 'it must be your handset' nonsense they come up with, report the line faulty,don't accept an appointment, and insist they sent the problem to what was once called BT Operate, they look after the telephone exchange equipment and it's 'data',

  • Error occured at Class not registered... Because Excel is not installed?

    I received the following error while trying to run an application built with LV 7.1:
    Error -2147221164 occured at Class not registered in Open_Excel.vi > Report_generation_excel_Tbeta WITH new layout.vi > Mirror_Cycling_Main tbeta-2.vi
    Could this be because Excel is not yet installed on the computer?  Will there be a problem if Excel is installed after the 7.1 Runtime Engine and LabVIEW drivers?
    Also, should I stay away from installing higher versions of Excel than what was originally used?
    Would it be possible to create a VI like this with the base version of 8.2?  I'm not certain what some of the controls on the front panel are and 7.1 does not give me additional information in the help dialog- if someone could give me the names of the various components circled in red in the attached JPG I would appreciate it. 
    Thanks,
    Dave
    Solved!
    Go to Solution.
    Attachments:
    excel_vi.JPG ‏79 KB

    I'm using excel 2003 with labview 2009 v9.0f2. I have attached the VI here. Basically, Im just using the"excel get all data.vi" to read an excel file to create an array and that's where the error occurs.
    Max
    Message Edited by MaxXx on 12-07-2009 10:33 AM
    Attachments:
    Excel Get All Data.vi ‏26 KB
    Excel Get Data Specified Field.llb ‏209 KB

  • How can I get the serial number for CS6 - I did not register it on my adobe account and I don't have the invoice/email from Aug 2012 nor the box anymore. I need the number to move software to a new computer.

    I am trying to move Indesign CS6 to a new computer.
    To do this I need the serial number of the license.
    It seems I did not register the number on my Adobe account as nothing is there.
    I bought the software in August 2012 - and no longer have the invoice.
    i think we got the software by box but am not sure.
    Please help!

    Hello Karen,
    in this case you should search for Adobe's staff members by writing a personal message. They can often help better than we, we the users like you. Please have a look in the forum to persons with this icon under their avatar:
    Hans-Günter
    P.S.
    Very often Preran works as the "good spirit".

  • The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine (Windows Server 2008 R2 (64) vs MS Office 2007)

    We just have switched our local server from 32-bit to 64-bit machine and now we have Windows Server 2008 R2 Service
    Pack 1 with MS Office 2007. On server we are running an application in ASP.Net 3.5 using visual studio
    2008. All users have 32-bit windows 7 and MS Office 2007.
    when user tries to import data from Excel to Database (SQL Server 2005), error comes as
    "microsoft.ace.oledb.12.0 provider is not registered on local machine".
    I have tried a solution by installing Access Database Engine 2007 Office System Driver on the Server, but the error
    was same. Now what should I do to resolve this problem??? Should we install Office 2010 64-bit on the Server or is there any other solution???

    Hi,
    Thanks for your posting.
    the file can be made in excel 2007, try to install:2007 Office System Driver: Data Connectivity Components
    http://www.microsoft.com/en-us/download/details.aspx?id=23734
    Regards.
    Vivian Wang
    TechNet Community Support

Maybe you are looking for