Lifetime in xml forms - final users cannot see available docs

Hi, I have a News xml forms project integrated with Approval process, and I want to integrate lifetime too.
1) How do I to enable Lifetime??
What I did is the following: I`ve enabled Lifetime in the folder containing the docs, and I setup manually the validto and validfrom properties (Details->Settings->Properties->Lifetime) of every doc, and the only people who can see the docs are those that have write permission on the folder (and myself too).
I´ve read a lots of forums and I did everything that they say but successless.
Could anybody help me??
Well, Thanks in advance!!
Marcelo
ps: I didnt forget to publish every doc after I modified the valid to/from properties. ideas?

Hola Juan
In my case, i had no CM System selected on Task Scheduler.
So check System Administration -> System Configuration -> Knowledge Management -> Content Management -> Global Services -> Scheduler Tasks -> Check valid from -> TimeBasePublishingPublish
(idem for Check valid until -> TimeBasePublishingUnpublish)
At that point, you must check if you have selected any CM System, if not, select one. Help Sap says that that field is optional...but, well, as you can see, I had no cm system selected, and after I selected one, the lifetime began working very well.
check <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d1/5b6635f5e0ef428fb513336881679b/frameset.htm">Scheduler Tasks for Time-Dependent Publishing</a>
Hope it helps!!
Regards
Marcelo

Similar Messages

New Jabber user cannot see (only) one of the added buddies

Running ichat server, just a handful of OD users. OD is on the same machine as Ichat server. Nothing is limiting the use of Ichat by any of the OD users. Server G5 10.4.9, Clients managed Intel Imacs 10.4.9
Added a new user.
New user can add buddies in the Jabber List.
New user can see all but 1 of them in the List.
One of the buddies, lets say UserX, can see the new user in her Jabber List.
No matter what we have tried from within Ichat the new user cannot see UserX.
Both users are members of the same groups and have matching access abilities.
Any suggestions. Thanks for looking at this.

New user can see all but 1 of them in the List.
If I understand it this correctly, 'new user' can see all other buddies except one. And all the other users can see this buddy.
Lets call the new user "userX" and the one they cannot see "userY" and lets call your ichat server "jabber.myserver.com"
The configuration files for users buddylist is stored in the spool di rectorywhich you can find at /var/jabber/spool/. In there you will find a directory the matches the name of your ichat server. For me that is jabber.clayford.com. In this directory you will find one xml file for eash user of ichat server. Their file name is the OD logon name for the server.
Stop the ichat server service and make back up of any files you edit before you start.
Open the file for "userX.xml" In this file you will see some xml code that starts <item jid='[email protected]' subscription='xxxxxx'>. there will be a number of them, one for each buddy.
Mke sure the xxxxxx is the word 'both' [with the quotes] and if the text ask='subscribe' exists in that line before the >,remove it. So that definition should now be: <item jid='[email protected]' subscription='both'>.
Save the file and now open the file userY.xml and check that the item <item jid='[email protected]' subscription='both'> exists.
Restart the ichat server and the problem should be fixed...

Standart Portal User cannot see Website created with WPC?!?

Hi there,
just a new Question.
I created a Website with WPC as shown in this Blog:
https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5924
Web Page Composer u2013 how easy it is to create and publish a web page (Part III)
I created also a User that have rights:
Groups:
Everyone
Authenticated Users
Roles:
Testrole (That one i created for the Website)
But my user cannot see the Website after Logging in.. In the Menu there is a Menuentry called: Website
Thats correct. But the Site do not load.
After i put the User in: Group - Administrators i can see the Website... whats wrong here?
Regards
Bjoern

OK i am a step forward.
i checked help.sap.com and find a hint to the Security Zones.
Defining Permissions for Security Zones
1. Navigate to Security Zones ® com.sap.nw.wpc ® wpc.
2. In the context menu of the following folders, choose Open Permissions and define the permissions specified.
Permissions for Security Zones
Folders
Roles/Groups
Permissions
medium_safety
Site owners, editors, and authors (for example, the wpc_editor_role role)
Select the End User checkbox.
You can leave the default entry for the Administrator column as None.
no_safety
Visitors (for example, the everyone group)
Select the End User checkbox.
You can leave the default entry for the Administrator column as None.
I changed the no_safety (i added Group - Everyone)
Now i can see the Page.. but i also see at the top right of the page: EDIT PAGE
And a Standart EndUser should not see: Edit Page
What can i do here?
Regards
Bjoern

One user cannot see Inactive Addresses in Account Overview

One user cannot see Inactive Addresses in Account Overview in the CRM 7.0 IC.
This user has the same roles and authorizations as all the other users.
We have also performed a user comparison in CRM and ERP and have also reset the user buffers in both systems.
If I copy the user to another user in CRM and ERP the copied user can see the Inactive addresses. A user comparison shows that the user and copied user are identical.
Any ideas?
Aubrey Smith

Just a gamble, but check his user parameters in SU01.

User cannot see tax amount while creating PO

Hi All
My user cannot see tax amount while creating PO but on displaying the PO after saving he can see the tax amount in the PO.
Is there any authorisation issue or what is the proble

Please check the autorixation. Take the screen shot of /nsu53 and contact with BASIS person
regards

Why is it when I convert a Keynote show into HTML, PC users cannot see it properly? Using latest OS and Keynote versions.

Why is it when I convert a keynote show into HTML, PC users cannot see it properly on their computers?

JohnRobertBrown wrote:
It looks perfect using Google Chrome on my Mac. But doesn't work well on Explorer on a PC. It seems to be way off center.
There is never any guarantee that automatically generated html will look right on every browser, especially Explorer. For max compatibility with MS stuff it's best to use Office to start with instead of iWorks.
I don't know whether you could manually edit the Keynote html to make it work better with Explorer. It would be interesting to know whether it looks right in Windows Safari, Chrome, or FireFox so you could know whether only IE does it wrong.

I have a application installed in my apps folder but others users cannot see them

I installed an app on my imac using OSX Lion. The app is in the application folder of the admin account. The other standard users cannot see the app. Is there a way that they can use the app and see it in the application folder when they log in?

Then move it into their application folders as well.

Lion-Windows users cannot see attachments

I just upgraded to Lion, and now some Windows users cannot see/find attachments. I did all that was advised (clicking on the "Windows user friendly" list), but to no avail. I sent to several Windows users and no one can see attachments with the new Mail program. Also, one of the most important icons in the Mail toolbar ("Add Attachment") seems to be missing. This sometimes helped in previous Mail versions when sending to PCs, but I cannot locate it in Lion. Looks like I will have to use Microsoft Office Outlook for email. This is too bad, as I like the other features the new Apple Mail program has, but must use a trustworhty email program.

Scott,
The issue is one I am chasing, and is due to Lion's change to not send Plain Text (apparently). Although changed in the Compose window, when reviewed, it will have been sent with HTML, anyway.
While the actual problem is with MS and Outlook or Outlook Express, the work around once was to use the command to Make Plain Text before sending.
Ernie

My users cannot see my java applets

I have a few java applets on my web page, but most of the users cannot see them.
I have changed my html's with the HTML Converter, hoping to overcome the problem, and got the following codes in my html's:
In the <OBJECT> tag:
http://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-i586.cab#Version=1,4,0,0
In the <EMBED> tag:
http://java.sun.com/products/plugin/index.html#download
Questions:
1. Will these URL's in the html automatically download, or tell the user about the java installations he needs?
2. Is it the Java-Plugin or the Java Virtual Machine users have to download to view java programs?
Even if you don't have the answer I would be grateful if you can tell me if you are able see my java applet. If you can, you should see a flashing text reading "Mixed" in the middle of this page:
http://medlem.spray.se/kungsgarden/mixed_e.htm
Best regards,
Mona

Questions:
1. Will these URL's in the html automatically
download, or tell the user about the java
installations he needs?Yes, on most browsers, the URLs and html you have written will automatically download the plugin or tell them where to go to get it. As a rule of thumb, if your users are on IE the plugin will automaitcally be downloaded. If your users are on Netscape they will be directed to the url in the embed tag. Your page looks right. It could be the code has an error in it and it is not the html. See my previous reply. Looks for errors and post them for me to see.
2. Is it the Java-Plugin or the Java Virtual Machine
users have to download to view java programs?The Java plugin run the Java Virtual Machine. So, they have to download both to view applets, but they come together since the Java Virtual Machine is inside the Java Plugin.

Error after enabling lifetime on XML FORMS.

Hi all,
Ive created my article (XML FORMS) that was working fine. However, after add the lifetime properties (validfrom, validto) into the form, a message error Resource cannot be displayed with XMLResourceRenderer is showed when a new article is created. Does anyone know what could going wrong?
Any help will be appreciated,
Alcides Flach

Hi Alcides,
   In this folder, where you have created these xml files by mean form builder, do you have other kind of documents not created with form builder ?
   If you create other folder and then within it you create xml documents (form builder) after that display them using KM Navigation iview with a suitable layout set, do you have the same problem ?
   Have you tried to restart this server ?
   At last, you can enable debugging settings option in System Administration->System Configuration-KM-CM-User Interface-Settings-Advanced Options-Debuggings Options-edit and enter you user-id. After that refresh you browser.
   After that, when launch km navigation iview you are going to see a renderer link.
   Try with this link:
   https://www.sdn.sap.com/irj/sdn/thread?threadID=110919
Patricio.

Show lifetime in xml forms?

Hi ,
I have created forms for News using XML Form Builder.I have also put the ValidFrom and ValidTo Fields on my Edit form for the News Authir to set Life Time for the news he will create.
The Properties value for both ValidFrom and ValidTo Fields is as follows :
ValidFrom : /Properties/tbp:VALIDFROM
ValidTo : /Properties/tbp:VALIDTO
I have enable time-based publishing for my folder where these forms/news is being saved.
But the time-based publishing is not working.
I even tried setting properties in Details -> Lifetime for the news craeted directly but its not working.
I am using EP6 SP14.
Wht could be going wrong.
Pls help.
Regards
Saurabh

hi Patricio,
In Content Management,I have created a folder "abc" under the repository "document".This folder will hold the xml files created for the news items.
The document repository is predefined and has been assigned the Repository Service "tbp".
i have enabled the time-bound publishing for the folder "abc" in its Detail section.
For the news reader , I have made the folder "abc" as "read only".
But the news reader is not able to see the news.
My xml form for the news Author has fields for entering date and time for both "Valid from" and "Valid To".
On saving the news item ,i can actually see these values in the property "LifeTime" of the news document that has been created.
I even set these ValidTo and ValidFrom at the "LifeTime" property also.
But nothing is working.
Also could u pls elaborate on ur statement :
"time-dependent publishing service requires the application property service."
Nothing is working for me.
Pls help.
Regards
Saurabh

IRecruitment: New users cannot see jobs as candidates

Hi
I´m experiencing a problem with iRecruitment. All the people in my company have an Oracle user associated to their corresponding person. The ones created long before (i don´t know exactly when, maybe when iRecruitment was implemented), can connect using the employee candidate resp. and search for jobs without problem. The new created users also connect with the same responsibility, but they cannot see any job. I´ve run the following programs with no success:
- Synchronize WF LOCAL tables with the following values for the “Orig System” parameter:
1. PER_ROLE
2. FND_RESP
3. FND_USR
- Sync responsibility role data into the WF table
- Workflow Directory Services User/Role Validation
Any idea?
Thank you in advance

Thanks guys. I finally solved it. We have a security policy activated to prevent users to see certain info (such as salaries) thru the app or database. One of the tables was per_all_vacancies. So we granted the profile value associated to that policy to these users and now they are able to search for vacancies. Thank you all of you for your help and effort. I´ve noted down all your suggestions so i can solve future problems regarding irec.

User cannot see the "-" signs on amounts in ALV report

Hi all,
We have a problem with a user, who cannot see the signs on the amounts in an ALV report:
<a href="http://img66.imageshack.us/img66/1424/nataliabr9.jpg">Report without signs</a>
The user has tested this report with his user, and another test user, on his computer and on another computer. It does not change anything, he cannot see the signs "-" on the amounts.
But when I launch the same report on the same client, I cann see the signs:
<a href="http://img398.imageshack.us/img398/1203/moigl3.jpg">Report with signs</a>
So, I think it does not come from his user (he has tested with two different users), or from his computer (he has tested on two different computers).
Do you have any ideas?
Thanks for your help.

Having seen and "played" with an NB100-12a the other day I must agree that the grey letters on black keys
aren't a clever idea - its bad enough that the keys are so small also.
I currently own a satellite Pro with which I am very happy ( apart from the inclusion of Windows Vista which I
don't particularily like ) and found this machine easy to "drive" BUT due to the keyboard size and lettering
I won't be buying one ( unless they do a redesign - an acer aspire one keyboard and touchpad or NC10 style
design ) and I think that the price of these machines has recently dropped from approx £300 to approx £270
due to poor take up by the public mainly for the above reasons.
Sorry Toshiba looks like i'll be buying an NC10 - unless I hear of a possible redesign.#
Mike

Please help: User cannot see webi report data

Hi,
I've got a wired problem here in my webi report. Basically I am located in Singapore and produced a webi report for our user in UK. The report looks totally fine with all the data shown correctly. But when our report user logged into the dashboard from UK, she could only see partial data and some of the information are missing(blank cells in the report).
To verify the cause I've done the following test:
1. I remote control her computer and log into dashboard using my account, the result is I get same problem and I cannot see some of the data.
2. I let her remote control my pc and log into dashboard using her account, she no longer has this problem and can see complete data.
We use same version of IE, same JAVA version. And the report data is not time sensitive, so different time zone might not the possible cause.
This problem is killing me. Can anyone please help and let me know any possible solution? Thanks so much.
Edited by: Sinsin Tan on Jul 14, 2010 5:59 AM

Hi Sinsin, what version of BusinessObjects are you using? Is it XI 3.1?
I don't know if it is the same problem or not, but I have seen that before when a user cannot view the data, change the font and/or background color and the data becomes visible. Reinstalling the client fixed that problem. If you couldn't figure out the root cause, you might want to consider this option.
If you are using the BusinessObjects tool, you should join [ASUG|www.asug.com]

Project Lite user cannot see tasks assigned ...

Hi
I have assigned tasks to a user Project 2013 and linked the project to Project Online.
As the administrator, I see all my tasks in the Timesheet view in PWA but the users that use Project Lite canot view their tasks and cannot see them in their Timesheet.
I am quessing it is a permissions issue but cannot find where to set the right permissions.
Any solutions out there?
Thanks.

Hi,
Have you correctly published the assignment of the user from the project (either PWA or MS Project Pro)?
Is the user looking at the right period?
Is the publish job successful?
Is the booking type committed and not proposed?
Is the resource the assignment owner of the assignment?
Have you assigned an enterprise resource and not a local resource? When you go to the resource center, select the resource, can you see the assignment?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Lifetime in xml forms - final users cannot see available docs

Similar Messages

Maybe you are looking for