Light around adapter is red when the battery is fully charged

The subject basically says it all. My battery is fully charged, it has been for a while, but the ring is red. Under the battery icon in the upper right is says calculating until full, but it also says 100%, clearly something is wrong. Any suggestions.
Thanks,
Aaron

This sometimes happens when the actually battery status and what your PowerBook thinks you battery stus is gets a little out of sync. This is normal so don't worry too much about it. As long as you calibrate on a regular basis you'll be fine.

Similar Messages

  • Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged?

    Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged? or does it continue charging?In which case,is it better for the battery life to switch off the power supply or leave it on while using the macbook?

    Yes, and the pilot light on the MagSafe2 connector changes from orange to green. If you unplug, you will start draining the battery again, whereas if plugged the Mac will take power from the brick and leave the battery in a charged state.

  • Should I disconnect my iphone lightining connector when the battery is fully charged? or i can connected always?is there any issue using iphone powered in?

    Should I disconnect my iphone lighting connector when the battery is fully charged? or i can connected always?is there any issue using iphone powered in?

    It can stay connected fully charged without any problems.
    No issue using the iPhone while charging.

  • My iPhone has started buzzing or beeping for unknown reasons.  It seems to happen when the battery is fully charged as well.

    My iPhone has started buzzing or beeping for unknown reasons.  It seems to happen when the battery is fully charged as well.

    you cannot overcharge the iPhone battery.  You can leave it plugged in with a full charge for as long as you want.  It will not affect the battery at all.

  • How can you tell when the battery is fully charged?

    when done syncing, i have a totally green large battery icon- but thats what i always have- any other indication- or am i misreading the large green battery as an indicator to charge completness?
    the little white battery icon never seems to change when using touch 2g?
    what am i missing please
    thank you very much
    bob donchez

    The small battery symbol has a lightning bolt symbol when the battery is charging and a electrical plug symbol when it is completely charged.
    There are pictures in the users guide, page 27: http://manuals.info.apple.com/enUS/iPod_touch_2.1_UserGuide.pdf

  • Can i use the charger all the time or should i unplug it when the battery is fully charged??

    Dear Freinds,
    What do you think better for maintaing the battery performance?
    keeping it charging all the time or unpluge the charger when it become fully charged, decharge it and then charge it again?

    "Apple recommends charging and discharging its battery at least once per month."
    From here >  Apple - Batteries - Notebooks

  • How do I know when the battery is fully charged?

    I use my computer to charge it, but there's never any indication that it's fully charged, so whenever I take it off, it's just a guess, and I'd like to get the maximum battery life possibly out of a charge. Any way to tell?

    Don't rely on the icon to indicate battery issues. It is trying to predict how long your iPod will run under the current operating conditions (as I understand things), so it is not so much of a gas gauge as a range indicator.
    If the indicator is not all the way up to the tippy top, I wouldn't sweat it. Keep track of how long your iPod plays - that's the real indicator of battery condition.

  • HT201210 when the battery is fully charged,always after spending a few percent battery iPad2 freezes

    please help me!
    i using ipad2
    - ios 6.0.1
    itunes 11.0.1
    after spending a few percent battery ipad freezes then it shows a black screen and then itunes conect.
    i must always restor and update ipad.
    i reset ipad in many ways.
    i regularly closing applications.
    my ipad has never been jailbreak.
    thanks

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?

    My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?

    Take it back to the Apple Store for repair since it's still in warranty.

  • My Iphone4 charges when The battery has fully died but when its on the lighting bolt does not appear. "Help"!

    My Iphone4 charges when The battery has fully died but when its on the lighting bolt does not appear. "Help"!

    Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.  If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    Suggest that you take full advantage of the above.

  • When my battery is fully charged and i remove the power lead the computer shuts down

    When my battery is fully charged and i remove the power lead the computer shuts down, evan when the power lights are fully green on the charger and the battery pack indercating lights.
    Regards

    I have exactly the same problem, which started again yesterday; coincidentally the day my warranty ran out!
    The situation is complicated for me because I live in rural lincolnshire, but was in London all summer and had a new logic board replaced under warranty last month at the London- Stratford store.
    It seems the £400 logic board replacement didn't fix it. When I try to get support, the website just laughs at me and holds out the cup for more money.  I had a chat with somebody in the store this evening and I've got to take it into a store AGAIN!
    Perusal of the 'Support' pages turns up literally thousands of people who have this or similar faults, all the way back to 2006, and I've not seen anything yet indicating that Apple have got a grip of it.
    I've been using Apple kit for 16 years now and I've never had any trouble until now, but this bloody laptop, which is no better than my iMac now for portability  has let me down badly several times in the last 6 weeks.
    I'm really hacked off with this, get your **** together Apple!

  • Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! They said it should be pulsating but it's not

    Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! I already read some reviews and discussion about this. They said that the lightning bolt should pulsate when charging but it's not!

    Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
    A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
    I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
    What is using data, unsolicited, every 6 hours?
    Why does it change?
    Why does it only happen on the iPhone 5 series and not the 4?
    Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
    I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ...

  • I am unable to tell when the battery is completely charged.  I have showing the battery symbol with the bolt-this is present even when the device is not being charged.  And it is always showing 2% charge.

    I am unable to tell when the battery is completely charged.  I have showing the battery symbol with the bolt-this is present even when the device is not being charged.  And it is always showing 2% charge.

    Are you using the AC wall charger?
    To check status, I use System Activity Monitor app http://itunes.apple.com/us/app/system-activity-monitor/id306192663?mt=8 and System Status Lite app http://itunes.apple.com/us/app/system-status-lite-device/id407752428?mt=8
     Cheers, Tom

  • I work from my truck. I use my iPhone almost continuasly. Is it ok just to leave it plugged into the charger all day? So the battery is fully charged when I leave my truck.

    I work from my truck. I use my iPhone almost continuasly. Is it ok just to leave it plugged into the charger all day? So the battery is fully charged when I leave my truck.

    Yes. Charging automatically stops when your battery is full, & you can't overcharge.

  • I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    The battery is fully charged so it is not the problem.
    What happens when you use the MagSafe?

Maybe you are looking for

  • BSOD Error while booting Thinkpad L440

    Link to image Hi All,  I'm getting a BSOD Error while booting my Lenovo Thinkpad L440 system.  Please help. Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

  • InDesign CS6 not compatible with InCopy CS5?

    Hi, We've recently upgraded our designer to have the latest edition of the creative suite (CS6), but we've left our editors with their versions of InCopy CS5.... and we've run into a problem. We get an error message when the editor is trying to open

  • Single quotes around a variable

    Hi, I have values that are being passed into a variable with single quotes around. for eg: 'test'. So the value in variable v_empname will hold the value 'test' But then below sql statement returns null: select empid into v_empid from emp where empna

  • Prob with FM ----- ME_DIRECT_INPUT_SOURCE_LIST, Urgent

    Hi , Iam using the Fm  "ME_DIRECT_INPUT_SOURCE_LIST" to update a Source List for the TCODE : ME01. I have passed the parameters : I_MATNR      I_WERKS      and T_EORD. And even sy-subrc  is ZERO after Fm execution, the Source list is not getting Upda

  • Sync Error 53 after 3.1.3 update

    I saw one asnwer to this - which was change your operating system from XP to Vista so that it would work - Really, that;s the sort of answer you expect from Microsoft. Why does apple need to make a copy all my photos anyway so that is can copy them o