Light aura,glow,beam help needed...please?

I am almost done with this project but have been stymied on one of the last things I need to do.
There are four light fixtures in this photo. Two of them need to have a "glow" around them and one needs beaming light effect. One of the lights, the round one on the right has the look I am going for regarding the "glow" or "aura." (Although I'd be pleased if I could make it a little bigger.) The round spotlight fixture to the far left should have the beam of light. And the oblong light at the rear has a little glow around it but it defintely needs to be bigger.
I have tried copying the glow around the right round light and playing with it to place around the other lights but it's just not working out. I found a "beam" of light on the web that I tried to incorporate into the photo. It seemed that if I could get the color of the "beam" adjusted to the same color of the "glow" around the far right light that would work but I can't seem to get that done either.
I have tried working with the effects and styles but apparently I'm doing something wrong. I have tried to find plug-ins to help but I'm lacking the knowledge on how to find the right plug-in because the one I finally installed is not helping me.
Does anyone have any guideance they can provide me?
Thank you so much.
Phoebe

What you are thinking of doing will invalidate your warranty and as a result cannot be discussed here.
The only option available to you which won't invalidate your warranty is to send it to a Nokia Care Point which will fix it for you. Unfortunately, it will mean having to send it to Asia.
I know you have started multiple threads on this issue but telling you anymore then we already have will break the forum rules and be deleted by the moderators. You could however try asking the same question at some of the other unofficial boards.

Similar Messages

Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Account Information > http://support.apple.com/kb/HT1918

Help needed please, with Iphone stuck with apple picture and progress bar after software update attempted

Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help

ljm17 wrote:
...This keeps happening, everytime I do this type of update, I...
Then you should know what you need to do... If you don't remember...
See Here > http://support.apple.com/kb/HT1808

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

Have you guys been able to activate your iphone yet? I bought an iphone 4s from eBay and it worked fine, but the previous user had left some data on it, so last night I used the "erased all content and settings" to restore it to factory setting so I can start fresh and restore my backup. But now I'm stuck at the activation screen (I get the same "the activation server is temporarily unavailable") and can't get it to activate, even if I use my old deactivated AT&T sim card (I'm on straighttalk now).
I might try activating it with an active AT&T sim card from my fiancee's phone when she gets home, so I'll let you know how that works outs.
If it's true that the server is down; anyone know when it will be back up again? Thanks in advance.
iPhone 4s iOS 5.1.1 (9B206)
Carrier AT&T 12.0
Modem Firmware 2.0.12

New Hard drive, can't access certain aspects. Help needed please

Hi everyone.
I have an HP Pavilion dv6-6052ea laptop.
I've been having problems with the hard drive so got a new one installed.
My main issues are since getting it back, I can't access any of the original HP installations etc (I've downloaded all the drivers I know about through HP).
The 2 main things I'm missing are 2 things that came with the laptop.
1: Beats Audio sound system
2: Video Graphics: AMD Radeon HD 6490M (1 GB DDR5)
and I have no idea how to get them back. Can anyone help. Do I need to install specific drivers? I can't find any trace that they exist on my laptop now apart from the stickers on the laptop! Any help is greatly appreciated.
I never had any CD back ups for the laptop. I do have the old HP back up etc saved on a USB but I don't know enough about the folders and files to know what I need to look for. (I still have the old hardrive.)
Again, any help is massively appreciated. Thank you!
Tony

If you used your HP Recovery Media, all factory install drivers and software would have been installed. If you didn't create your HP Recovery Media when you first setup your computer, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
If a generic Windows 7 installation disc was used, you will need to install all HP specific driver for your computer. Please try IDT High-Definition (HD) Audio Driver, Intel High-Definition (HD) Graphics Driver, and AMD High-Definition Graphics Driver to resolve your missing drivers issues. Windows 7 64-bit driver for your computer can be found on the HP Pavilion dv6-6052ea Entertainment Notebook PC Drivers page.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HELP NEEDED PLEASE

Hi everyone
Programming help needed here. Any advice would be greatly appreciated!!!
I have been assigned some work for a program called Processing 1.0 availale at http://processing.org/download
I was give the 9 individual programs I needed to make however they were converted to Java files from .pde files. The program is based on Java but only runs .pde files and NOTHING else!
I decompiled the files and got the source code, but it is a slight variation of the original someone made in processing, and needs some tidying to get it to run.
I think the programs are very simple for a programmer, although I AM NOT.
CODE is BELOW
// Decompiled by DJ v3.10.10.93 Copyright 2007 Atanas Neshkov Date: 02/05/2009 13:15:00
// Home Page: http://members.fortunecity.com/neshkov/dj.html http://www.neshkov.com/dj.html - Check often for new version!
// Decompiler options: packimports(3)
// Source File Name: Assign2_1.java
import processing.core.PApplet;
public class Assign2_1 extends PApplet
public Assign2_1()
SquareSide = 20;
Rank = Nums.length;
Side = SquareSide * Rank;
Green = color(0, 255, 0);
Yellow = color(255, 255, 0);
BG = Yellow;
public void setup()
size(Side, Side);
background(BG);
fill(Green);
for(int i = 0; i < Rank; i++)
rect(i * SquareSide, 0.0F, SquareSide, SquareSide * Nums);
public static void main(String args[])
PApplet.main(new String[] {
"--bgcolor=#ece9d8", "Assign2_1"
int Nums[] = {
6, 14, 8, 9, 2, 3, 4, 2, 8, 3,
9, 2, 0, 5
int SquareSide;
int Rank;
int Side;
int Green;
int Yellow;
int BG;
Edited by: chevy1 on May 2, 2009 7:32 AM

HELP NEEDED PLEASEShouting is a good way ensure you don't get help. Also you should give a meaningful subject.
Any advice would be greatly appreciated!!!I suggest you ask a question after providing enough information to be able to answer it.
Also use CODE tags when posting code as it make the code more readable.
We are more likely to help people who are trying to learn Java rather than someone who might be looking for an easy way out of doing an assignment.

ITunes corrupt file message - urgent help needed please

I have an iPod video 30GB, i downloded the latest iTunes & Quicktime version, and updated my iPod also to the latest update. When i connect my iPod and start downloading music from the library in iTunes, the iPod keeps on disconnecting and restarting by itself, and i get a message that the file iTunes.exe is corrupt. I tried Apple support and did all what they said by downloading the latest updates and versions, and also did the Chkdsk utility on Windows, but still it did not work, the iPod keep on restarting and i cannot download anything on it, i had it now for a week and did not use it at all because of this problem, can somebody with a technical background help me please, i use Windows XP.

I have an iPod video 30GB, i downloded the latest iTunes & Quicktime version, and updated my iPod also to the latest update. When i connect my iPod and start downloading music from the library in iTunes, the iPod keeps on disconnecting and restarting by itself, and i get a message that the file iTunes.exe is corrupt. I tried Apple support and did all what they said by downloading the latest updates and versions, and also did the Chkdsk utility on Windows, but still it did not work, the iPod keep on restarting and i cannot download anything on it, i had it now for a week and did not use it at all because of this problem, can somebody with a technical background help me please, i use Windows XP.

MP3 burning help needed please

Hi,
I'm hoping someone can help me please.
I'm wanting to burn a mp3 cd but with the songs in separate folders so that when i play them in my car i can flick between the albums instead of having to go through all the singles one after another.
Does anyone know of a good mp3 burner that can do this, and where to get it from too.
All and any help in this matter is greatly appreciated
Cheers
Paul

You want them in separate Album folders?
Put the songs into the playlist.
Sort the playlist by Album then burn it as MP3* disc.
This will put the songs into Album folders.
Likewise, if you sort by Artist, songs will be put into Artist/Album/ folders.
* Note that only MP3 files will be burned to the disc. If the files are not already MP3 format, they will be skipped.
If you burn it as a DataCD, it wil work the same except it will copy the files regardless of format. I do this as my CD player will work with both AAC & MP3 formats.

WLC Logs!!! Quick Help needed please!

Hello,
My client want to check who owned a certain IP address on the WLC and from which AP he was associated. I looked at the system logs in the GUI but couldn't get beyond 6 hours. Is there a place I can download last day logs from CLI/GUI? Or Can I login via SSH and extract the logs via CLI?
Please this is vital and I appreciate your help,
Regards,

Please note that the customer is using Pass-Through Web Authentication for the Guest WLAN.
Thanks,

I Beam HELP NEEDED!

Hello,
I'm in desparate need of some help. I have a flash input text
field that is embedded in Director as a flash sprite. I'm using the
most recent build of Director which apparently fixes the "Know I
Beam" issue and it does seem to work...
BUT,
My projector does a little bit more. At the very beginning I
run the following script.
on prepareMovie me
screenWidth = baScreenInfo("width")
screenHeight = baScreenInfo("height")
stageHeight = screenHeight
stageWidth = screenHeight * 1.25
stageCentreWidth = (screenWidth - stageWidth) / 2
_movie.stage.rect = rect(stageCentreWidth, 0, screenWidth -
stageCentreWidth, stageHeight)
end
All this code does is sets up the screen to scale to
fullscreen at a 3:4 aspect ratio. Once this is accomplished, there
is a behavior that scales the Flash sprites in the frame to the
appropriate size. So what happens?
Well, on my Desktop 1600X1200 screen resolution... I can see
the I Beam in the input text field... but my laptop which is
1280X720 It does not exist... If I set my desktop to 1280X1024, the
can still see the I Beam. The client requires the I Beam and this
is only an issue when the Director stage has been scaled and only
on machines other than the development system? I've even tried
using Verdana as the font but to no avail.
Everything in my projector works perfectly except for the I
Beam disappearing???
Please help? I'm at a loss on this one!

1) create an I-beam graphic using an image, vectorShape or
anything that can have it's registration point changed.
2) edit the member in Director's paint or vectorshape (or
other) window or use code to change the registration point of the
member to the bottom of the member (instead of the center as in
bitmap images and vectorshapes, for example).
3) You may consider creating a gif or filmloop of the I-beam
to get the animated blinking effect as well as setting it's sprite
ink to reverse.
4) Create a behviour script member and paste the code below
into it and then attach the behavior to your I-beam sprite.
property spriteNum, sp, mem
property pOffPos
on beginSprite me
sp = sprite(spriteNum)
mem = sp.member
pOffPos = point(the stage.rect.width + 10, the
stage.rect.height + 10)
sp.loc = pOffPos
end
on prepareFrame me
spNum = the keyBoardFocusSprite
if spNum > 0 then
txtSp = sprite(spNum)
sp.locZ = sprite(spNum).locZ
txtMem = txtSp.member
sel = txtMem.selection
if sel[1] = sel[2] then
selPoint = txtMem.charPosToLoc(sel[1] + 1) - point(0,
txtMem.scrollTop)
if selPoint.locV < 0 or selPoint.locV > txtSp.height
then
sp.loc = pOffPos
exit
end if
if selPoint.locH > txtSp.width then selPoint.locH =
txtSp.width
ibeamPoint = txtSp.mapMemberToStage(selPoint)
sp.height = getDefaultFixedLineSpace(txtMem, max(1,sel[1]))
sp.loc = ibeamPoint
else
sp.loc = pOffPos
end if
else
sp.loc = pOffPos
end if
end
on getDefaultFixedLineSpace (theMem, theChar)
theRef = theMem.char[theChar].ref
theField = new(#field)
theField.text = theRef.text & RETURN
theField.font = theRef.font
theField.fontSize = theRef.fontSize
theLineHeight = theField.lineHeight - 1
theField.erase()
return theLineHeight
end
** Note: the above code will function reasonably well, but
there are some things that haven't been taken into consideration:
1) if a line gets cut off at the top or bottom then the
I-beam height won't adjust to accommodate that.
2) setting no wrap on the text member has it's own inherent
issues, but the I-beam will work with it just not absolutely
perfect.
3) you may need to add some modifiers or adjustments to the
positioning of the I-beam to fine tune it if you can't or don't set
the member's registration point to the bottom (left, center or
right horizontal registration is you own choice).

Restore help needed please.

I need help. I got a new iPhone today and I went to iTunes, pressed restore, because I didn't know what else to do.
And now because it was logged in under my boyfriends apple ID my iPhone is my boyfriends iPhone too.
How do I turn it back to mine!? I need urgent help please!

Go to Settings > General > Reset > Erase All Contents and Settings. Now this time, select Set Up as New iPhone rather than Restore from Backup.

Error in database reading ! help needed please.

My project involves monitoring of ovens.
The temperature from the oven are obtained using advantech ADAM module.
Each material enters the oven and an alert is given to take it out after the desired time inside the oven.
When i execute this program. an error pops up exactly 1 our after the start of the program.
Kindly help me.
I have attached the source code including the DB files and the error screen shot.
username: 123456
pass: 123456
Thank you ina advance.
Please help figure out the error.
Regards
Grugh Mike
Success is Everything !!
Solved!
Go to Solution.
Attachments:
New Microsoft Word Document (2).doc ‏151 KB
source.zip ‏4529 KB

The biggest problem in your code is architectural. You need to learn about a few things like event-driven programming. As but one example you have an administrative operations VI that would be much smaller and much more efficient if it were built around an event structure and not multiple case statements. Your main application uses sequence structures - which are never necessary. As I recall, the last sequence structure I used in deliverable code was in the spring of '88.
You also are not handling any of errors - which I suspect might be the source of your problem. It's possible that due to an error (which is going unreported) that a connection is being left open when you think it is being closed. But at this point that is just a guess.
Fix the structural problems and you'll then be able to troubleshoot your DB problem. Shoot, in the process of fixing the structural issues, you may fix the DB!
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

IReader installed but wont open Urgent help needed please!

I have installed Acrobat Reader X.
When i try to open files I get a problem saying Microsoft and Adobe have encountered a problem and need to close.
I get an option to Debug, Send error report or Dont send.
The information which comes up when I look for more information is the following::
error signature
Appname. Acrord32.exe. Appver 10.0.1.434 Modname acrord32.dll
Modver 10.0.1.434 offset 001869666
It was previously working then the next time I came to use it I got this.
Desparately need help

1. camera loading - have you tried updating or reinstalling your firmware?
2. keyboard - define strange
3. slow - how much is phone memory and what apps are running in background (see taskmanager, hold menu key until it shows)? turn off theme animations. it helps.
4. handwriting - have you set the handwriting recognition to recognize your particular penmanship? Go to menu>settings>phone>touch input. Set writing speed to very fast, calibrate your screen and take handwriting training so the phone will recognize your handwriting.
5. qwerty - what things? how so? have you set it to qwerty?
6. cannot scroll in file manager - its not a problem. Thats normal for the OS. Use Nokia Photobrowser or the Gallery for viewing pictures. File manager is for managing files, not viewing them.
7. Motion sensors - read #3
8. Phone feels hot - how hot? Batteries heat up when charged. Its normal. However it depends on how hot exactly.
9. Depends maybe on how long the video is. My 5800 feels hot when watching an entire movie. Also this would be reflected on #3 as well, as the phone may be working overtime.
10. Music when unplug headset - Its normal for almost all Nokia phones (heck even some other brands this is normal), try to use an alternative player if you like
11. Back cover - Its the design
12. Yotube - use youtube app
13. Use Nokia Photo Browser download from ovi store. It shows pics only and looks real cool. Anyway, you can put all your videos in the gallery into a virtual folder so that it is separate. Its the way the gallery is designed, to show both pics and video. As you can see, it is written Images and Videos, so they're supposed to be together in there.
14. Adobe still hasnt caughtup its mobile solutions for its PC solutions. Its their fault not Nokia's or anyone else's.
15. Depends on extension. Built in office reader only reads .doc, not .docx.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

? symbol in Keynote - Help Needed please !!!!

Hi,
New to Mac and even newer to keynote.....
when i open a new slide there are ? symbols on the slide which appear also when i play the slides....
is this an error or not ?
If its an error what does it mean and if not how do i remove them ?????
Please help as my daughters homework needs doing (by her obviously, not me)
Thanks
Nick

Here are a few things you can do to troubleshoot the problem:
- Have you tried re-recording the entire song playlist? This would be the first thing to try.
- If it still skips, does it play OK in the Editing mode (not in Presentation mode)? If so, there may be a problem with the way you Recorded the Soundtrack.
- Try recording just "Beautiful Day" as a Soundtrack and see if it still skips. If so, then this track itself may have some "glitches" and need to be replaced with a new copy.
- What is the processor speed of your playback computer? With some presentations the audio will skip on slower machines, but not faster ones. (e.g. Some audio tracks will skip on my G5 desktop but not on my MacBook Pro.)
Good luck

IWeb 09 and Go Daddy...Help Needed Please!

I have read many of the posts on this question and still don't know the answer:
Is it possible to use iWeb 09 and use the built-in FTP to upload directly to my Go Daddy site?
I've tried and keep getting a "Testing failed. The directory/path couldn't be found."
So, my question is, can someone who has successfully uploaded from iWeb 09 to Go Daddy please tell me what to enter in the FTP Server Settings of iWeb? I would like to know the following:
SERVER ADDRESS (do you just use your site name, such as www.mysitehere.net or ??)
DIRECTORY PATH (some folks say "http://" but this doesn't work for me)
Also, do we just use PROTOCOL "FTP" or another?
I am very appreciative of any help here! I basically bought iLife 09 so I could update my site directly from iWeb. In the past I used Fetch, which worked but is a bit of a rigamarole. So, if we can do it directly with iWeb 09 it would be great.
Thanks for any help here! I'm very grateful!

I just did this last night for the first time. Watch the FTP loading tutorial for iweb, it helped.
Publish to FTP
Put your site name in (what ever you want to put down)
Server address is your domainname.com (no www)
User name
password
no directory/path
FTP
Put your full website URL www.yourdomainname.com
This will get it onto your go daddy site. It will put all of the files in a folder called whatever you called your site name above. Your website will look funny but that is iWeb FTP for you. It will look like www.yourdomainname.com/www.yourdomainname.com/home.html
To fix that (I was told last night by go daddy) that I needed to log into godaddy and go to hosting on the left menue. then to manage account highlighted next to your domain name you want to manage. Then go into the folder with the site name you put in iweb and move everything in that folder to the root directory. Copy over anything in the root directory. When I did that the duplication of domain names went away and you are left with www.yourdomainname.com/home.html
If you have problems call godaddy. They can walk you through it. Only do that after you tested successfully.
Roger

Light aura,glow,beam help needed...please?

Similar Messages

Maybe you are looking for