Light keeps blinking

I have had my Ipod shuffle 2nd gen pluged in for approx 6hrs and it is not charging. Keeps blinking orange. Do I need to regester it. Actually I have 3 that have the same problem. santa Claus brought them for boys all three of the same and all have the same problem

Actually the blinking light does mean that it is
still charging. Read the "Quick Start" guide again.
I'm having the same problem and even after "Safely"
disconnecting it my iPod won't work because it is not
charged.
Ummm... since you are aware that it's charging WHILE even while the orange LED is blinking, are you allowing it to do so for 4-6 hours, or more? The 4 hour charge time Apple quotes is a rather optimistic estimate... To actually check battery charge status you must remove it from the dock AND cycle the ON/OFF switch; the status LED will show green, orange, red, or nothing to indicate charge level.
I can't believe so many people are having the same
problem. I find it hard to believe this many people
have the same problem and Apple doesn't post a
solution for it. Is their product just that crappy???
I won't go there...

Similar Messages

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • HT1551 after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

    after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

    The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

  • Laptop won't start quickly but power wifi and caps lock light keeps blinking

    Hi, it has happened before too but rarely but nowadays it happens on daily purposes.
    When I switch on my laptop after leaving it for 8-9 hrs, it won't start up but instead power, wifi and caps lock light keep blinking. I tried removing battery and pressing power button for few minutes but nothing happens. Then i left it like that with lights blinking and after 15 20 minutes it booted. I did same yesterday too. I left it like that it booted after 20 minutes..so My question is "why is this happening? Is it a motherboard issue or is it because of cold moisturous weather here and laptop takes time to get warm up?" Should I show it to HP Service center?

    Hi @Nishant5788
    Welcome to the HP Support Forums. I see that you are having a problem getting your notebook to boot up normally. As for what is causing the problem the blinking Caps Lock should tell us what is causing the problem as it should be blinking in a pattern. This HP document Computer Does Not Start and LEDs blink has a chart that will tell you what the blink codes mean.
    This is most likely a hardware issue and you can give us a call regarding repair options.  You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Amber Light Keeps Blinking

    Amber light keeps blinking. I have been unable to set up wireless and never get a green light. Connection to internet works via cable to the Airport base station. I have done numerous resets and with power on off cycle per instructions on page 29. This is a brand new unit, arrived today, so it has never been working. I have hit the reset button both with power on and while powering up. Did a firmware update too. Still no luck. Is this a defective unit since it will not reset? I have also done complete resets with the DSL modem cycled off and back on, Base station off and brought back to power, and MacBook Pro cycled on and off too.
    Should I call the vendor and ask for a replacement?
    Popadave

    Hello popadave. Welcome to the Apple Discussions!
    A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:
    o The base station has not yet been configured because it is new, or the reset switch has been set.
    o You have selected a security configuration that is not recommended.
    o One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.
    (ref: http://docs.info.apple.com/article.html?artnum=305101)
    If you run the AirPort Utility, it will show an amber circle on the summary page next to the area(s) causing the problem. Click on this amber circle and it should provide an explanation.
    Please post back what you find.

  • ISight camera green light keeps blinking.

    using a macbook pro with retina display.
    The green light keeps blinking when not in use. 
    The camera is still able to function.

    If you are concerned about the blinking although your camera works, contact Apple Support or  an Apple Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • HT1551 the led light keeps blinking after restarting it

    The apple tv light keeps blinking after restartin it with remote.

    You will need to restore it on a computer using iTunes.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support
    Scroll down to the section titled:If your Apple TV still does not respond or if you were unable to follow the above steps

  • My keyboard light keeps blinking and a message on computer says connect keyboard with bluetooth

    My keyboard light keeps blinking and the computer has a grey screen with picture of the keyboard with message saying connect your keyboards bluetooth to computer...but it doesnt do anything even when i shut computer off then turn it back on.

    Sounds like a pairing issue. See if this article helps http://support.apple.com/kb/HT1809

  • Z10 Red Light Keeps Blinking

    my bbz10 red light just keep blinking wat should i do

    you have either a email, miss call or some type of text notification.

  • BEFW11S4 - Internet light keeps blinking

    I recently had to format my PC due to a hard drive issue. I Have Comcast internet service (CABLE INTERNET) and my router hooked up to my workstation,. I first unplugged my router before the format. Reformatted my PC and plugged my router back in. When I plugged it back in I saw a static bolt come from the plug head but it still powered on fine. The "Wireless" part works fine. My laptop can see the router BUT my internet lite keeps blinking when I tried to use the router from my wired PC. I checked all the setup but IM not sure what’s going on? Everything seems set up fine. The "internet" light is blinking erratically and I don’t remember it ever doing that. Is my router shot? PLEASE HELP! Ryan

    well if the internet light is blinking that means modem and router is communicating with each other... if internet is not working through the router try following steps...connect modem >> router >> hardwired pc, reset the router by pressing reset button on router about 30 seconds, release the reset button and power cycle the n/w, power down the router and modem, wait for couple of minutes and power up the modem first once modem is rebooted, power up the router check whether it works or not, if it still doesn't work logon to router's setup page, open I.E. and in the address bar type 192.168.1.1, it would ask for username and password, put "admin" as password without any username, click on MAC address clone, enable it and click "clone" save the settings, power cycle the n/w... check whether it works for you, if you have any problem let me know.

  • WRV200 Wireless light keeps blinking, no clients connected.

    Hi,
    Sorry if this is a silly question, but im wondering why my linksys wrv200 wireless light on the router keeps blinking even though my wireless laptop is not turned on?  I checked the router status and no other clients are connected so im puzzled as to why the wireless activity light is blinking which shows activity as per the manual.
    Is this normal??  
    Thanks

    The DHCP client table only contains the computers which requested an IP address from your router. Any device/computer with a static IP address will never appear in that list. You cannot tell if a wireless client with a static IP address is still connected or not.
    Wireless clients may (more likely) appear in the wireless client list. I don't know if the WRV200 has it or not. Usually you'll find the wireless client list by going to the wireless MAC filter setup tab. Enable the filter if it is not enabled (no need to save the setting), press edit filter list, and it pops up a window where you have another button "wireless client mac list". That button shows you a window of active and inactive wireless clients with their IP address. Any static IP address client should appear there, too. (If the list is not there, search the manual for it...)
    You could make another test: change the SSID temporarily on the router to something else. A longer random string. Setup WPA2 with a random preshared key. Save the settings. Disconnect all computers from the router. Still blinking? Unplug the modem connection from the router. Still blinking? If the router is still blinking with nothing wired to it and a wireless network that nobody knows (yet), well, that should clearly indicate a router problem (or at least a wireless light problem). If that is the case it should not be too hard to bring the router back to the shop and show them what is happening.Message Edited by gv on 12-18-200605:43 PM

  • E51 notification light keeps blinking

    Hi, I have a E51 phone. The problem is that the notification  light will not stop blinking as long as the phone is on, even if there is no sim inside and the notification light blinking is disabled. It blinks at iregular but very short intervals. Has someone encoutered this problem before? 
    Thank you very much.
    Solved!
    Go to Solution.

    try removing battery for ten minutes
    this light is also known as a breathing light
    you can turn this off
    Notification lightYou can set the notification light on the cover of your device
    to blink when you have received a new message or when you
    have missed a phone call.
    To set the length of time you want the notification light to
    blink, select Notification light > Blink light for. 
    here is the user guide the online version which may contain more info than the book provided with phone
    http://nds1.nokia.com/files/support/apac/phones/guides/Nokia_E51_APAC_UG_en.pdf
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Apple tv light keeps blinking and never connects

    My Apple TV keeps blinking as soon as it has power and never stops. It worked the last time I used it. I tried unplugging and reconnecting, etc. Finally in desparation I hooked my older apple tv to the same tv using the in place cords and it worked. Now how to make this newer one work. Help!

    You need to restore
    Restore your Apple TV (2nd and 3rd generation) - Apple Support

  • Keyboard lights keep blinking?

    My MacBook Pro keep blinking on & off

    Try a SMC reset:
    http://support.apple.com/kb/HT3964
    Ciao.

  • Red light keeps blinking

    I recently purchased the new 1gb i pod shuffle. the problem is that i left it plugged in to my computer to charge but when i safely removed it, the i pod shuffle went really hot and ten minutes later the red light started blinking and so i don't know what is wrong with it

    My question is not necessarily that there is a red
    light, but a series of green and orange flashing
    light, followed by no sound of any sort. I've
    upgraded the ipod and tried to down load new songs
    and it simply won't play them. That is when it
    flashes green and orange dots.
    Alternating green and orange means no playable content (ERROR: No music loaded). Alternating green and two orange (10 seconds) means ERROR: iPod shuffle must be restored
    Which are you experiencing? If the first, then you need to select one of the songs and click on File>Get Info>Summary and let us know what it says.

Maybe you are looking for