Light room 1 raw files

I am currently a new lightroom 1 user. It apparently does not support raw camera files. Is there a plug in that I can download so that I can handle these files.

First ensure you update to the final version of LR version 1, which was 1.4.1. You can do this via the help button.
If the particular camera you are using was introduced after LR 1 was replaced by LR 2 (around a year or so ago) your cameras RAW format may not be supported by LR 1.4.1. Unless you wish to upgrade (which will cost you) to LR 2, you will have to first convert your RAW files to DNG's for LR to be able to work with them. Fortunately ADOBE supply a free DNG converter that will allow you to do this.
That can be downloaded here
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4520

Similar Messages

  • Light room "offline files"

    Some of my pictures in Lightroom read "offline or missing"  I am able to view the picture but unable to develope it in anyway.  Not sure why this is happening???  All the pictures were fine a week ago.

    that means LR can not find the images on your harddisk. you just see the previews rendered by LR.
    have you moved or renamed you image folders or files?
    or are these files on a USB harddrive you may have disconnected?
    check if these images are in the place (in the correct folder on your harddisk) LR thinks they are.

  • Why does lightroom 5 do not read or can't find my raw files when I'm trying to import my images from my camera to light room

    It just started happening out of the ordinary. I had a photo shoot done today. I came home plugged my camera usb to my mac lap top and tried to import my raw files as i usually do into light room 5 to edit my images. This time the same error message popped up stating it couldn't read or my files weren't found over and over again. Neither the new ones nor the old pictures was able to import them. Please Help!

    I just bought Lightroom and have the same problem - MacBook Pro with OS X 10.10.1. LR actually displays the photos properly when previewing but fails when starting the import. Also, a couple of times it would start but would hang up. I think it may be a Yosemite problem. I was having trouble importing with Aperture too. The fail message from LR was:
    The following files were not imported because they could not be read. (6)
        IMGP7941.JPG
        IMGP7942.JPG
        IMGP7944.JPG
        IMGP7943.JPG
        IMGP7945.JPG
        IMGP7946.JPG
    I can copy the folder from the camera to my desktop and then import. That works but of course I shouldn't have to do that.

  • In case my input RAW/DNG files are already applied white balance , is there a way to cancel the white balance in light room ?

    Hello I am new to lightroom and I am verifying this tool  as a tool for raw converter (for image quality team)
    In case my input RAW/DNG files are already applied white balance gain
    Is there a way to cancel the white balance in light room ?
    Thanks
    Ron

    Make sure that Develop Settings being applied during import is set to "None".

  • How to open Nikon d600`s raw file in Light room 5.3 ?

    I resently downloaded Light Room 5.3 for try after joining Webinar.I want to open Raw file of my DSLR D600 of Nikon .But Light Room do not identified Raw file,tells me Light Room is not identifying the files,please update software from help,I try to update then dilog comes your software is up to date.Then I downloaded Adobe Raw DNG Converter 7.3 and try to convert Raw file but not identified.
    I do not know what to do , please help me to solve the problem.
    Thanks.
    Pravinkumar Dal [ Pro.Photographer]
    [email protected] 

    Lightroom 5.3 should be able to open D600 RAW photos.
    The problem is most likely that you used some version of Nikon software to transfer the photos to your computer. This interferes with Lightroom's ability to read the files. If the files are still on your camera card, use Lightroom to directly access them from the camera card. If they are not on your camera card, you can still fix the files, see http://forums.adobe.com/message/6181267#6181267

  • Why are my digital raw files changing color when imported in photoshop and light room?

    when I open my raw files in photoshop, the whites get blown out and the images have green/ yellow tint. I've tried using color sync utilities to correct the issue, but I keep getting this message when I try to repair profiles:
    Searching for profiles...
    Checking 65 profiles...
    /Library/Application Support/Adobe/Color/Profiles/RedBlueYelllow.icc
       Tag 'pseq': Required tag is not present.
    /Library/Application Support/Adobe/Color/Profiles/Smokey.icc
       Tag 'pseq': Required tag is not present.
    /Library/Application Support/Adobe/Color/Profiles/TealMagentaGold.icc
       Tag 'pseq': Required tag is not present.
    /Library/Application Support/Adobe/Color/Profiles/TotalInkPreview.icc
       Tag 'pseq': Required tag is not present.
    Verify done - found 4 bad profiles.

    here is the screen shot of image open in Bridge.

  • Have a new Sony SLT77 II - Light room (4.4) won't recognise RAW files. Downloaded add-on 6.5 but it won't work

    Why can't Adobe and others make things straightforward for those who aren't computer nerds?
    And why can't you contact PERSON to give help?

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Alpha SLT-A77 II (ILCA-77M2)
    ARW
    8.5
    5.5
    The SLT77 II requires Camera Raw 8.5 or later which is only compatible with Lightroom 5.5 and later.
    Lightroom 4.4 will never be able to open Raw files from that camera.
    Why doesn’t my version of Photoshop or Lightroom support my camera?
    You can either:
    Upgrade to Lightroom 5.5, or
    download the free Adobe DNG converter, convert all Raw files from your camera to DNG format then open the DNGs in Lightroom 4.4.
    Photoshop Help | Digital Negative (DNG)

  • Light room 3.6 Raw file

    I have Lightroom version 3.6. I just took some raw file photographs of an item in preparation for selling online. Lightroom will not allow me to open this. Can anyone give me some assistance?

    That camera was not added until Lightroom 5.4. You can download the DNG converter, latest version is 8.7.1, and use it to create DNG copies that you can open with Lightroom 3.6.

  • I noticed that when I develop in light room 5 that the raw files are larger and the finished product is 80 percent smaller

    anybody have an idea why or is that the norm
    my raw file was 11,2 and my JPEG was 1.26

    The RAW files are the same size as the camera made them. Lightroom doesn't change the file size or image size.
    The JPG size depends on a dozen or so things, some of which you can control and some of which you cannot control, but almost always the JPG is smaller than the corresponding RAW.. I see no particular problem with a JPG that is smaller, depending on the export options you chose, and I have never yet seen Lightroom produce an incorrect size JPG
    By the way, normally numbers have units, you did not mention any units, so I really can't comment further without knowing the units for the numbers you show

  • How to open a Camera Raw Alias open in Photoshop or Light room or Bridge?

    Please Help.
    I have about 20 images that I was trying to Burn in a DVD but , I ended up getting CR2 Alias  files with an arrow at the bottom left corner.
    I want to open the images either in Photoshop CS6 or in Light Room 4 or in Bridge. PLEASE HELP me open the images in jpg. or in RAW.
    Thanks .

    Thank you for your prompt feed back. Here are the details:
    CAMERA USED Canon 5D mark II
    MAC BOOK PRO 10.6.8
    Shot tethered in Light room 4  in RAW
    I was shooting tethered in LR in RAW  , and after the shoot, I was trying
    to burn the RAW files on a DVD R. After a while
    the DVD was rejected by the  built in Optical Drive of my laptop and I am
    left with a folder ( containing all the images) on my desktop and each
    image icon looks like a folded envelope with a small arrow going up from
    the left hand corner  . I erased my CF  card before that, thinking I had
    all the images in my Light room. BUT that was the beginning of the DISASTER
    !! My external Lacie drive, which I was using for storage of my tethered
    photos in LR, also froze.NOW , I am left with only the Alias CR2 icons. I
    dragged them in Photo shop CS 6 , but won't open.
    PLEASE help me open them in any format.
    Thank you very much for your time.
    Regards.

  • My light room 5 can't read my files on my iMac and MacBook Pro any help pls

    my light room 5 can't read my file on my MacBook Pro and my iMac I already update my camera raw on ps cs6  any help with this issue pls

    If the error message is “files cannot be read” then this is usually a problem with the destination at the right of the destination import panel.
    If the issue is something different than not being able to import then please give a more detailed description.

  • Light Room 4 does not recognize my Raw Images (NEF) for my nikon D810.  Is there a fix to this problem?

    Light Room 4 does not recognize my Raw Images (NEF) for my Nikon D810.  How do I correct this issue so that I can import NEF files into lightroom 4

    The D810 requires Lightroom 5.6 or newer. There is no way to import the NEF files into Lightroom 4. You can download the latest DNG converter and use it to create DNG copies that can be opened with Lightroom 4. Or, you can upgrade to Lightroom 5.

  • Where i can dowload camera Raw 8.8 because update don't rub on Light room 5 or CC2014

    HI
    where i can dowload camera Raw 8.8 because update don't rub on Light room 5 or CC2014??
    Thanks
    Samsam

    You can get the camera raw 8.8 updater from here for photoshop cc 2014
    Camera Raw plug-in installer
    There is as of yet no update for lightroom 5
    http://blogs.adobe.com/lightroomjournal/2015/03/camera-raw-8-8-now-available.html
    You would need to convert the files to dngs first before lightroom would read them.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.8
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.8

  • Raw images are not opening in photoshop nor tiffs with light room adjustment

    raw images are not opening in photoshopcs5 nor tiffs with light room adjustment from lightroom3. need help have client dead line for today and monday..please help. thank you nancy

    I am too tired to go through all this again with an other forum, I also do not have the time, I must hand in my images monday morning...I will wait till you get back to me...it 8pm brussels time..I will continue working in capture one in the mean time... and hope you can find the answer...thank you for you help. sincerley
    nancy

  • I have LR 4 and now I cannot open the software because I get this warning: light room cannot start because it cannot create files in the temp file location.. C:/windows/temp. How do I fix this? I have removed and downloaded LR and even used by disc and st

    I have LR 4 and now I cannot open the software because I get this warning: "light room cannot start because it cannot create files in the temp file location. C:\windows\temp\". I think I need to have LR open in a different place but I have no idea how to do that. Any help is most appreciated.
    Alex

    Jim
    Thank you for your prompt reply. Unfortunately I am not that tech oriented and
    cannot easily find that folder. I did notice when I was booting up the LR software
    that I could accept the site where LR usually is set up or choose a place. I am
    thinking that the standard location for LR software is corrupted and that if I
    chose a different place it would work. I say this because whether I use my
    original disc or download from adobe I get the same warning. I have 100GB of
    memory on the hard drive and I have cleaned the computer with Mcaffee and free
    software. What should I do next? I can't use this software and I doubt LR 5
    would open up with my current problem.
    Alex

Maybe you are looking for

  • How do I get a field to automatically select a value and change color based on another automatic field?

    Here is the situation: I have a row on a form called Finding Risk Rating. In this row are four fields: Probability, Severity, Risk Rating, Color. Probability is a drop down menu with the following values: 1, 2, 3, 4, 5 Severity is a drop down menu wi

  • File created in InDesign CS5.5 appears blank in InDesign CC.

    When I open a file originally created in CS5.5, the pages appear blank. Moving my mouse over the page boxes highlight, showing that the original elements are still there but not showing. Links and text are there but do not show unless zoomed out to 2

  • PO Wise material Consumption

    Hello All, I  want to know how to find out the quantity consumed in subcontracting order in component overview for different material in any purchase order. E.g Purcase order 450000000 we have 2 items. and both are "aaaaaaaaa". But in these 2 line it

  • Aggregation Table Question

    Guys, Firstly let me say hello to the community. I am relatively new to OBIEE and can I apologise up front if some of my questions seem a little too straight forward. I am trying to setup some aggregation on my tables. I have 4 tables: Actual Summary

  • IPhoto Movies marked as 1904

    I've seen a few other posts about this but they are archived for some reason so I cannot reply to those threads. I just upgraded to iLife 09/iMovie 09 hoping this might be addressed, no such luck! Is there anyway you can force iMovie to recognise the