Lightening to 30 Pin Connector- Accessory not Supported

My Lightening to 30 PIN Apple connector is having issues with my ipod nano- 7th generation.
It keeps saying "accessory not supported"
It will randomly work (not very often anymore) and I have tried cleaning it but to no avail.
Does anyone have any other suggestions?
Thanks!

If you are referring to this: http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=f00a66cd157507dae0a6a8a00d9d478a2e1ba3… it does not work with iPod Nano at all.

Similar Messages

  • HT1454 I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem

    I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
    i am getting the same error with my rf transmitter that i use in my car

    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • Car stereo - 3GS "accessory not supported"

    Anyone else got this? My 08 Subaru STI has a ipod connector that charged my 1st Gen Iphone and allowed me to play music from it on my car stereo. Now I got the 3GS and it says the same thing as before "accessory not supported" but this time it says it won't be able to charge.
    Anybody with something similiar? Has this been a change for 3GS that non supported accessorys won't charge now?
    Thanks

    This was changed with the last generation iPhone and iPods. They are using the usb pin on the dock connector to charge the phone now instead of the firewire pin as used on your old first gen iphone. There are companies that do make adapters though. Search for "ipod 5v adapter" in google.

  • Camera kit accessory not supported

    Hi,
    I have an iPad 1 and a camera connection kit that works fine. It was working up to a week ago on a new ipad2. I updated my mac to 10.7.1 and synced my ipad2 for the first time in a while before going on a trip. During the trip I tried to use the camera kit but the ipad2 is now saying accessory not supported. The camera connector still works fine with my old ipad1
    Any help or ideas?
    Paul

    Thanks for the reply
    - Both are the same version 4.3.5
    - The reset has not worked
    - Both the SD card reader and the USB device when plugged in will cause the ipad2 to say "This accessory is not supported by this iPad"
    - They both work on the old iPad and I can download the images
    Interestingly, I also had a problem sync'ing some jpegs to the ipad2 and had to delete the latest folder so the sync could complete. iTunes was just saying that the ipad could not display those files, yes they're just straight jpegs.
    I've backed up the device, I'm going to try a full reset

  • "This accessory not supported" in car

    2012 Nissan Xterra - plugged in phone to listen to music and recieved "This accessory not supported".  What do i do?

    Check the pins on the car kit are clean and not damaged.
    Also check phone connectionnport again for FUD or minor damage.

  • This Accessory Not Supported: HDMI Adapter on iPad2

    When I attach my Digital AV (HDMI) adapter to my iPad, an error message appears saying "This Accessory Not Supported". Is there a problem with the adapter? Or with my iPad.

    For the 4G
    Try:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    For the iPhone, try another cable.

  • Accessory not supported

    ipod syas accessory not supported when i put it to my car adapter and headphones

    Yes it will cause you grief. Go tot the Apple store and get them to replace the keyboard, as that is the same message I got just prior to 2 keyboard failures. The iPad puts too much stress on the keyboard connector tab, and it eventually becomes loose and non functional.

  • Every time I plug in av adapter to my iPad mini it says accessory not supported my ipad

    I am trying to use my digital av adapter with my iPad mini and it says accessory not supported by iPad

    Are you using the lighting digital AV adapter or a 30 pin digital AV adapter through a lightning to 30 pin adapter?

  • I have an iPhone 4S. I'm using a Belkin tune-cast F8Z498 FM transmitter. Has worked fine for several months. Now I'm getting an "accessory not supported" message.  Any help out there?

    I have an iPhone 4S. I'm using a Belkin tune-cast F8Z498 FM transmitter. Has worked fine for several months. Now I'm getting an "accessory not supported" message.  Any help out there?

    people repport dirt in the connector can cause this
    guess a broken connector could too

  • Accessory not supported by iphone just appeared.  HUH?!?

    I have an iphone 4 and for several accessories i get "this accessory not supported by iphone"  I cleaned the contacts and still get it - any ideas?  It never happened until recently and it happens in teh car adapter and other adapters.

    Clean the dock connector with a soft dry brush.
    In the future, try a search before posting... this issue is discussed regularly.

  • Accessory not supported by iphone message keeps appearing . . .  .

    This morning, my iPhone began to randomly display a "accessory not supported by this iPhone" message and keeps asking if I want to go into Airplane mode. On more than one occasion, the phone was not plugged into ANY accessory and was simply sitting on the table.
    On another, it was playing music via the headphone jack into my car stereo.
    I'm running V. 3.1.3, upgraded when it came out and have had no incident until today.
    Any ideas? Not a big problem, just more of an annoyance.

    Check your phone's dock connector and make sure it is free of lint and other pocket debris.
    http://www.apple.com/iphone/how-to/#help.this-accessory-is-not-supported-by-ipho ne-appears

  • TS2634 when i plug in my supra ekey adapter i get the message "accessory not supported by iphone" and i've had the adapter checked. it's ok

    When i plug my supra ekey adapter into my iphone, I get the message "accessory not supported by iphone". I know the adapter works because I took it back to my realtor association and they checked it.

    Try cleaning out the phone's dock connector. A soft dry toothbrush or similar.

  • My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays .

    My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.

    That message is usually due to a bad cable.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    If you can’t charge your iPhone, iPad, or iPod touch
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    or send it in to Apple. See:     
    Service Answer Center - iPod

  • This Accessory Not Supported by iPod Touch---Philips Dock

    When I connect my iPod touch to my Philips dock, a window saying "This Accessory Not Supported by iPod Touch." The dock will no longer charge nor play music. It only started happening after the latest update.

    For the 4G
    Try:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    For the iPhone, try another cable.

  • Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone".  Sound comes through and it charges but NO Video???

    Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone".  Sound comes through and it charges but NO Video???  I have verified the cable, I can play video with sound from iPod Nano 4th gen.

    composite don't support mirror so it will only display on the tv when the app being used support tvout option
    the build in video app does so it should display on the tv at least my composite cable does with my iphone4
    the audio always works it's pretty much works like a headset

Maybe you are looking for

  • Re: Portege M800 - can't get bluetooth installed in Windows 7

    Hi, I have a portege M800 PPM81C-07602D. It came with windows vista but I have reinstalled it to windows 7, and now I can't get the bluetooth drivers to install. I've tried the old vista drivers as well as the newer windows 7 drivers, but whenever I

  • My playlists in iOS6/iPhone 5 is not updated

    iTunes Match ***** sometimes. I added some songs into my playlist from my Mac mini. Immediately, songs/playlists were synced in the other computer (iMac). HOWEVER, nothing was updated in my iOS devices (with iOS6)!!!!!! Both my iPhone and iPad are st

  • Testing oracle apps security in reports

    Hi, I have a report which is running fine in Report builder 6i and also in Oracle apps(this is a customized report for oracle apps). Now I need to test the security in Oracle apps. As per the advice provided in metalink I added 1) added a user parame

  • Re: Runaway memory usage in Access Connections AcSvc.exe on Windows Vista (SP1).

    Wow... They deleted my previous message where I complained about AC and suggested to use Windows built-in functions for Wi-Fi switching instead. Well, I have Vista Business 64 on Thinkpad T61p and this piece of software just never worked properly out

  • Error when sending message(e-mail) from Process Chain ?

    Hello SDN s, How ya all ? I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ? The following is the Job Log Entries.... 30.06.2006 18:05:53