Lighting cables and adapters are not working after the last iOS 7 update.

Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
I have an iPhone 5 funning iOS 7.0.2.
I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

I had the same bug. Powering off the phone and back on resolved the issue

Similar Messages

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • Why did AME stop working after the last Windows 7 update

    AME suddenly stopped working after the last Windows 7 update. After the initial splash screen, I get a message saying that AME is not working and the program will be closed. Then I get the windows message that it is searching for a solution, then nothing. I am using the Production CS6. This happens whether I try to start AME directly, or queuing through Premiere Pro. I have tried reinstalling the entire package and have implemented all available updates from Adobe. I have no clue why this happened, but AME is crucial to my workflow.

    Try to delete the following folders and then launch AME:
    %AppData%\Adobe\Adobe Media Encoder
    %AppData%\Adobe\Common
    Make sure to first make a backup of those folders.

  • Internet Don't work after the last IOS Upgrade. What can I do?

    Internet Don't work after the last IOS Upgrade. What can I do?

    Can you give us more details?
    Is Wi-Fi working, i.e. not greyed out in Settings/Wi-Fi?
    Can you go online by using the Mobile Network?
    Any error messages given?
    Problem with your router?
    See these articles for help with Wi-Fi issues:
    Issues with Wi-Fi networks and connection
    Wi-Fi or Bluetooth settings grayed our or dim
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • Alerts sounds are not working after upgrading to iOS 7.1.2

    Hi,
    I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
    I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
    Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

    I got this issue resolved.
    It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
    It has been fixed by cleaning the charger slot by toothbrush! with some
    drops of a cleaner.
    Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

  • Phone and Contacts APP not working after the upgrade 4.01 from 4.0

    Dear all
    after the upgrade to 4.01 my iphone stop to operate the phone and the contacts app
    when i open phone or contacts the app close(crash) after 1 sec.
    When i connect to the mac i have the following message from itunes:
    "iTunes could not sync to the iPhone"Christos" because contacts are being synced over-the-air."
    Trying to open and change the settings at: mail, contacts, calendar but also crash
    Please help
    Thanks for your support

    This happened to me after I upgraded to 4.0. While the iPhone update offers some great new features it has really done a number on some very basic functions and overall operation.
    I am no longer able to use the contacts app to place calls. I can pull up my contact list but when I select an individual contact, the phone seems to freeze for a second and then crashes. (It might be worth mentioning that I use Exchange to sync my contacts.) While the contacts are all on the phone, I can't access actual contact information for each individual.
    I'm also experiencing random freezes, touchscreen delays, etc.
    I can deal with some minor bugs but not being able to use your contacts to place calls is a huge problem.

  • Develop Module is not working after the latest 5.5 update.

    I have uninstalled and installed from the direct link.
    Cleaned up and optimized the catalog, etc.
    Images are visible in the library and develop module, but if I try to start editing - there are no changes visible, unless I go to Library and back to Develop.
    If I click "before/after" the blank screen appears.
    Help! This is a major work issue for me!

    Ok, I'm back!
    - apply develop settings (via preset), if so: is it a custom preset?
    I did apply a special preset (custom), just recently. Right now, uploading images without. Will see if that makes any difference. (Update) - NO difference. 
    - apply metadata
    Copyright and Creator, but has done so for a while
    - apply keywords
    Yes. Always
    - rename files
    No.
    Does Develop misbehave in the same way for all your images, or is it for a subset of the images? (Do you have any jpegs in your catalog? If so, does develop work for them?)
    Do have some JPG, but generally all raw and it misbehaves with them all.
    Have you tried making changes in Develop with the image zoomed in to 1:1? If so, is the behavior still the same?
    Yes. At different zoom levels. Same problem.
    Have you tried removing the *Previews.lrdata package that sits next to the catalog? Would need to do this while Lr is not running. (This will cause the need to regenerate previews, which can impact performance for a while.)
    Mmmmm... I removed a bunch of things last time, maybe it was part of it... Can't find it right now. Where would it be?
    Have you tried purging the Camera Raw cache, in the 'Camera Raw Cache Settings' of the 'File Handling' tab in the preferences?
    Yes. No change.

  • Safari , App store , Ibook and preview won't work after the last update!

    i bought my mac book pro since early 2011
    and after i did the last update safari , App store , Ibook and preview won't work
    when i  press on it the small light on the dock light up then it goes off
    and nothing open and there is no error massage show
    and the bar don't change, plus about my mac don't open too
    firefox and itunes work fine tho

    I also deleted Safari and tried to reinstall it from the Apple website but It would not let me install it. I got to "select location" section and it would not allow me to select any of my drives because it said it required10.5.2 or newer. I have 10.5.3. Any Help?

  • Airplay is not working after the last updates

    Hello,
    I've updated iphone, ipad air and ipad 4 to ios 8 and apple tv 3 (1469) to newest version (7?).
    After that it's absolutely a disaster.
    Mostly I using the apple tv for music streaming, sometimes for mirroring...
    But it can not be found, I can not select the apple tv on ios devices because it is not there!
    The airplay symbol comes after swiping the menu up after approx. 1 sec and theres only the Denon Cocoon to selcet but not the apple tv.
    The same on the iMac I can not choose the apple tv directly from the top bar for mirroring and not in itunes for music streaming (but the Cocoon is there), and this altough the imac is also via ethernet on the same router, no wlan connection is required for streaming in this case.
    The apple tv is connected by ethernet to the router and I see in the router menu that the apple tv is connected to the internet.
    I did a hard-reset but this did not help.
    I've tried also with blutooth on or off and rebootet the ios devices.
    From time to time one of the different devices shows the apple tv...this morning for example after I turn blutooth on at the iphone and waited 30 seconds, it was there and it worked - sometimes on device shows the apple tv without blutooth and if I connect, nothing happen and the music starts on the device itself.
    If I start the apple tv via remote, everything is fine, I find it at all devices including the imac!
    If I managed it to start the music streaming with an device (as written, from time to time it works) the apple tv is avaible on all other devices.
    For me theres no question that theres a bug in the new apple-tv software (because I can not find it on the imac as well, otherwise I would think the bug is in ios 8).
    It is not possible to wake up the apple tv via airplay from sleep mode, I think that is the problem - if I turn off the sleep mode everything is fine.

    the1sen wrote:
    There appear to be many others with the same issue on here.
    Nothing unusual in that after an update.
    Generally speaking it's fairly obvious from the volume of such posts if there's a problem with an update or not. On this occasion I'm not seeing the sort of numbers that indicate a widespread issue.

  • Isight camera not working after the last update

    After reboot of the last OS update
    Isight camera not working...
    i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
    just to give you a recap of what i've tried so far:
    * restarting (obviously)
    * resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
    * just shutting down my computer and taking the battery out for several hours
    any Help pls
    because i mast to use it as soon as possible in a conference

    *A few suggestions.........*
    Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
    my isight camera is not working-not recognized with photo booth or ichat
    To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

  • Airplay does not work after the last update on iMac

    Today I have instaled the last updates on my iMac and the AirPlay mirroring on my AppleTV does not work anymore. I can hear the sound but the video doesn't work. Somebody knows how to fix this? Really dissapponted with Apple products.

    Try resettng the SMC and PRAM each 2-3 times, then post back.
    Instructions are in Intel iMac SMC and PRAM resets

  • My photo affects are not working on the new ios 7 I have an iPhone 4

    My iphone has recently been unpadated to the ios7 and I have not go panorama or any of the photo affects that are displayed in the right corner of the screen. Also my airdrop and control centre are grey not multi coloured help.?

    The Control Center is the grey panel the appears when you SWIPE UP from the bottom of the screen.
    Airdrop is now included in Control Panel.
    The Camera App has new settings at the bottom of the screen.  Tap on
    Video   Photo   Square   Pano (Panorama)

  • Why does my Facebook newsfeed not work following the latest iOS software update?

    Hi all
    I've just upgraded the software on my iPad mini but I can no longer get my Facebook newsfeed. All it tells me is to add friends!! I can still view my timeline, friends pages and groups etc!
    It's just my newsfeed I can't see.
    I don't have the same problem on my iPhone though!!!
    Thanks

    That Site Advisor add-on duplicates features that are built into Firefox. <br />
    http://www.mozilla.com/en-US/firefox/phishing-protection/
    That said the Site Advisor 3.3.1 is blocklisted by Mozilla due to the Site Advisor extension being the #2 cause of crashing the Firefox 5.0 betas. McAfee was notified of the problem long before that extension was added to the blocklist. Now it is up to them to fix it. <br /> https://addons.mozilla.org/en-US/firefox/blocked/
    I have heard that SiteAdvisor 3.4 is now available, which should fix all FireFox 5.0 issues. It is available from siteadvisor.com . Not sure why McAfee isn't doing an automatic update for their users.

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • Tun miniport adapters are not working and the camera card reader is not working on a T61P.

    The Microsoft tun miniport adapters #4,2, and 3 are not working.  They display code 10 error message. Also the USB  mass storage device (camera card reader) is not working. 
    I have tried to uninstall and update the drivers to no avail.  I have used ThinkVantage Tool Box.  It only lets me know that they are not working.  It does say to reinstall them.  I have tried.  All effort has failed.
    All was find until I ran several updates via ThinkVantage.
    All suggestions would be appreciated.
    Thank you,
    Tom

    You will not lose data if you back up
    Worth doing the basic troubleshooting
    Reset
    Restore  best as new since you have issues ,then you will know if it has started to function correctly ,if not .....
    Visit Apple store since if it isn't software probably iPhone is on it's way out

Maybe you are looking for