Lightning Connector and Accessories Made for Lightning Connector

Hi all--
I have an iphone 5 and a speaker dock made for the lightning connector. My problem is that with my phone in its case, it will not fit onto the dock. I know there were products available for iphone 4 that solved this problem -- dock extenders, and cords that had the male and female ends both as 30 pin on them, etc. I have yet to find any similar products for iphone 5 that will enable me to leave my phone in the case and still use the dock. Does anyone know if something like that is out there yet and/or when something like this might become available? I'm concerned that my case will not fit properly if I am continually removing my phone from it to use the dock. Thanks for your help!

I was able to find a docking/charging base with lightning connector on Ebay which has a removeable inner sleeve to accomodate the Iphone case. See http://www.ebay.com/itm/281020397977 for the one I got.

Similar Messages

Are parts and accessories available for H series 30000

Greetings to all, Is it possible to parts and accessories for H series 30000 H210 57088764 ? Thank you.

hey Ldxrunner2015,
i suggest calling the support team :
http://www.lenovo.com/contact/au/en/
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Is there any way to adapt and connect an AppleTV to 30pin Digital Audio with Certified and Made for Ipod/Iphone only declared HiFi like Panasonic SC-PMX5EG-S to listen via Airplay my Digital Audio content only?

Please advice. I do not like to wire up this box by RCA-Audio jack or any other analog technology
btw.: Cheap Bluetooth modules do not work on this HiFi reciver and will be detected like: "unsupported device", because it is made for Apple* only...
Thank you in advanced,
Kind regards,
EinerMehr

The ATV does not connect to dock or lightning connectors. It connects to a TV or AV receiver.

Cases and Accessories for 5G iPods

Ok, so ever since I purchased my Black 60GB iPod I started reading about how easily it scratched and realized I needed to get a case for it immediately. I was also surprised to discover that my old iTrip and other top docking accessories no longer worked with the 5G iPods. So I began to research my options for cases and accessories, and here's what I came across:
This is a silicone case from zCover that seems to be the only 5G specific case that is available and shipping now.
http://www.zcover.com/zCoverProduct_iPod_G5Original.htm
Here are 6 different options for cases offered by Speck sometime in mid-November.
http://www.speckproducts.com/for-video.html
Tunewear has several different options available for the 5G's. The silicone case (ICEWEAR 5G) can be found here: http://www.tunewear.com/english/product/icewear_5g/index.html
The wallet-sized leather case (PRIE TUNEWALLET 5G) can be found here: http://www.tunewear.com/english/product/tunewallet_5g/
And finally the leather case with belt clip and hook (PRIE Ambassador) can be found here: http://www.tunewear.com/english/product/ambassadoripod5g/index.html
All of these cases are shipping sometime in November and all come included with Tunewear's TUNEFILM 5G which can also be purchased separately, found here: http://www.tunewear.com/english/product/tunefilm_5g/index.html
Another leather case option is being offered by difusi. Here is their VideoValet case, stated to be shipping sometime this week: http://www.difusi.tv/hardware/casemini/videovalet.html
Since most of these cases haven't been released yet, I decided to fashion my own case for the time being. This option will probably only work for those of you who purchased the 60 GB iPods, because the 30GB 5G's are significantly thinner than their 20GB and 30GB 3G and 4G counterparts. But anyway, I purchased a cheap silicone case for a 20GB iPod from Best Buy (you can probably find one anywhere that sells iPod accessories for around $10-$15) and a pack of PDA screen protectors. Since the height and width of the new iPods are exactly the same (the thickness or depth of the new 60GB is close enough to the 20GB and 30GB 4G's) and the click wheel and dock connector seem to be in the same place, it was only the screen size that needed to be adjusted. So I cut the case to make the entire screen visible, used a small amount of heat with a lighter to melt the cut edges firm, and then cut a screen protector to fit. This is a crude option, but it has worked for me so far and I don't have a scratch on it yet.
As for other accessories available, allabouttheaccessories.com has nearly all accessories that are currently available and compatible with the 5G video capable iPods listed here: http://www.allabouttheaccessories.com/index.asp?PageAction=VIEWCATS&Category=193
As most of you know, the current incarnations of Griffin's t fit in the older case. Obviously the edges of the iTrip, perhaps the most popular FM transmitter for the iPod, are not compatible with the new 5G iPods. For some reason, Apple did away with the external power port on top of the new iPods, and therefore it is unlikely that there will be any accessories, including iTrip, iTalk, remotes, etc. that will dock on top of the iPod. Instead, most will use the dock connector port on the bottom of the iPod, which isn't all bad and actually offers some benefits. Griffin's new iTrip that will use this port can be found here: http://www.griffintechnology.com/products/itrip30/techspecs.php And with a simple mini USB to standard USB cable, you can charge your iPod using a number of car chargers that use the USB cable (including Griffin's PowerJolt of course).
Anyway, hope this post helps those of you searching for new stuff for your 5G iPods. Despite the criticism I've read, this device is a huge step for iPods and has a ton of potential. Sure there are a few things that need to get worked out, but the bottom line is they've added all t

I did a quick search on Best Buy and came up with the following...
http://www.bestbuy.com/site/searchpage.jsp?_dyncharset=ISO-8859-1&_dynSessConf=&id=pcat17071&type=pa...
I'm sure you can do the same on Google with the rest of the web.

HT1665 Hello. Is there any way of finding a list of accessories which hold "made for iPhone" certification?

Hello. There are a lot of new accessories available for iPhone 5 and iPhone 4 / 4S. Is there any way of finding a list of accessories which hold "made for iPhone" certification? I do not want to buy any accesories which may be harmful for my iPhone.

Here is the start of the setup:
Click on the Wi-Fi Options button and provide the needed info:
Click on the OK button. Now check the Internet Sharing box to turn it all on. If the port box you checked is no longer checked, then uncheck Internet Sharing, check the port box again, then check the Internet Sharing box again.

My Iphone 4 has a cracked screen and has made it impossible for me to unlock my pin. I an giving the phone to a friend but want to know if there is a way I can ensure all my data is wiped off it before I do. Can anyone help?

My Iphone 4 has a cracked screen and has made it impossible for me to unlock my pin. I an giving the phone to a friend but want to know if there is a way I can ensure all my data is wiped off it before I do. Can anyone help? I have upgraded to a iPhone 5 so Im not sure if the old one would have automatically wiped the old phone. I have lots of emails and messages I wouldnt want peo

Have you synced this phone, with iTunes, while the passcode was enabled? If so, plug it in, iTunes running, & hit the Restore button on the Summary Pane. This will also erase the phone.
However, if you have not synced, while the passcode was enabled, you will not be able to do this without first enereting the passcode. If that's the case, try recovery mode:
http://support.apple.com/kb/HT1808

My Apple Earphones with Remote and Mic White For iPhone says: made in vietnam. i want to know if they are OEM?

My Apple Earphones with Remote and Mic White For iPhone says: made in vietnam right in the cord. i want to know if they are OEM? here my email: [email protected], thanks.

Accidental damage is not covered under the warranty but if possible to reset the screen without causing additional damage, the Apple Store should do this without charging for it.

64 Bit Installer says it's made for 32 bit and tells me to install 64 bit

I used PC Mover to clone my previous XP laptop so the version of iTunes wasn't really made for the 64-bit OS of my new laptop and hasn't worked since. I try every couple of months to fix the problem before giving up out of pure exhaustion! I download the new 10.1 for 64 bit operating systems and during install it tells me that this installer is for 32 bit systems and I need to install the 64 bit installer!!! Nothing works!!! Does anyone have a clue how to make iTunes work again or where I can get a 64 bit installer that my computer will recognize as a 64 bit installer???

I download the new 10.1 for 64 bit operating systems and during install it tells me that this installer is for 32 bit systems and I need to install the 64 bit installer!!!
Yeah, it's actually the 32-bit version that PC Mover has wedged into the new 64-bit PC that is returning that 32-bit message. (When you try to install the later version, the installer tries to remove the previous version which suddenly realises it is on a 64-bit system, and everything turns to custard.)
In the best of all possible worlds, I'd prefer to remove the 32-bit iTunes by undoing the migrstion (using the PC Mover undo function). Unfortunately, my understanding is that you can only completely undo the entire migration.
If you aren't keen on that, there's an alternate strategy described in the following post:
http://discussions.apple.com/thread.jspa?messageID=12712585&#12712585
You may not need to search for a copy of Windows Installer CleanUp. In his/her reply to that post cmcmd reports:
Fantastic! I contacted PC Mover and they sent me a link to the Microsoft Clean Up utility. I deleted all of the Apple files, installed teh 64 bit iTunes and all appears to be working.
So you could perhaps try your luck with PC Mover too. Fingers crossed the support person you get through to will also have the link to the CleanUp download.

Help - i recently made put together a high quality movie for a relative, it has taken me months to complete and it goes for a total of 9 hours and 43 minutes ,however, it won't let me export the video at all! please help - its taken ages to make it!

Help - i recently made put together a high quality movie for a relative, it has taken me months to complete and it goes for a total of 9 hours and 43 minutes ,however, it won't let me export the video at all! please help - its taken ages to make it!

9 hours??!
Twice the length of a cinema epic?
How are you expecting to distribute it?
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

I used a GarageBand loop in a video I made for youtube. I want to submit this video for revenue. First, is this legal? Second, youtube requires written permission to use songs, and provides a comment box for proof of permission. What do I put in this box?

I used a GarageBand loop in a video I made for youtube. I want to submit this video for revenue. First, is this legal? Second, youtube requires written permission to use songs, and provides a comment box for proof of permission. What do I put in this box to prove It's ok for me to make ad revenue from my video?

Yes, you can use GarageBand loops for commercial purposes. Here's the Apple Doc:
http://support.apple.com/kb/HT2931
(Basically the only thing it excludes is to re-distribute the loops as loops.)
I don't know about the YouTube form, maybe you just fill in "Apple Loops", they certainly have come across this before.

Payment made for lightroom and photoshop joint package, still prompted for serial number

payment made for lightroom and photoshop joint package, still prompted for serial number which I have not been given. what do i do next?

Hi ,
I think you have downloaded the program directly from adobe. As you have the Photography plan, then you have to download this from Creative Cloud Desktop then they will be activated through with your email address. Then it will not ask for serial number.

Hi, I followed the instructions to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple. How to track the application progress? Can someone help?

Hi, I followed the instructions from Apple MFI website, to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple for couple weeks. How to track the application progress? Can someone help? < Edited by Host >
Thank you.
Best Regards,
Gerald

Hi Gerald
This is a user-to-user forum, and your message will not be received by Apple. You will need to sign into your Developer/MFI account, and contact Apple that way. This can be done here.
P.S Please do not post your e-mail address here.
Taylor

When i was waiting for an hour for itunes to grading my 2nd generation ipod touch to a 4.2.1 and it was about done, it suddenly said the network connection timed out and that made the upgrading a fail. Why does it do that? and what does it mean?

When i was waiting for an hour for itunes to grading my 2nd generation ipod touch to a 4.2.1 and it was about done, it suddenly said the network connection timed out and that made the upgrading a fail. Why does it do that? and what does it mean?

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

HT5621 I got iphone 4s secondhand and i made restore then its asking me for apple Id which i don't have it even the first owner i ask him about it but he don't have? please i need your HELP

I got iphone 4s secondhand and i made restore then its asking me for apple Id which i don't have it even the first owner i ask him about it but he don't have? please i need your HELP

No one here can help you, nor can/will Apple. If you don't know the Apple ID/Password that was originally used to activate this phone, you won't be able to re-activate it. And, if the previous owner tells you that he/she doesn't know it, you're out of luck. You simply won't be able to use the phone for anything other than a paperweight.
Called Activation Lock.

I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?

I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?

Is a version of Mac OS running on this Mac? Reboot and hold down the option key.

Lightning Connector and Accessories Made for Lightning Connector

Similar Messages

Maybe you are looking for