Lightning effects going black?

Hey everyone!
I have photoshop CC and when I enter lightning effects my image goes black and the lightning effects are not doing much. Will add screenshot.
What am I doing wrong?
Kind regards,
Noc

I did update it now and it is still the same problem. Maby my videocard is to bad? Got Nvidia GEforce DT 740M is that enough?
This is really bugging me since I work alot with the light in my pictures...

Similar Messages

  • MSI Lightning 7970 3 Screen setup, 1 goes black (no signal)

    Hello!
    I'm having some troubles with my msi 7970 lightining card.
    The first problem appeared 2 months ago where one of my screens went black all of a sudden(no signal was showing on the screen).
    At this time i had all monitors connected to my XFX minidp to dvi (active). After alot of testing i figured out that one of the adapters was the problem.
    This specific adapter was tested on all of my monitors and the problem of a screen going black was changing monitor. Remember the problem wasnt a blank screen all the time but after maybe 10-15 minutes in windows. Sometimes it went blank directly and not even a reboot would solve the problem.
    So the setup i had working after this troubleshooting was that i was runing 2 minidp to dvi and one in the regular dvi. This worked fine up untill this morning.
    I also have to say that during this time i did some overclocking with msi afteburner however i always did a stability test with kombustor to see that the card was stable. Now the overclock i had was only 30 mhz over stock (1070) so i would be VERY surpriced that if this would be the reason for why the gfx card is acting wierd again.
    However since i got this problem again i did reset on the gfx to ensure that this wasnt the problem.
    The problem still resided so started the regular troubleshooting with the minidps and i pretty much did what i had done before.
    The conclusion was that one of the adapters that i had left had become faulty.. But however what are the odds that 2 adapters goes bad within 2 months?
    So now im sitting here at work writing this post since i am at an end to what i should do and i would like to ask for some advice from you guys
    //Martin

    Quote from: zorgin on 07-November-12, 20:59:42
    That, Sir, I am not entirely sure of. I cannot answer this to be honest since i never figured that one of the ports would be the problem.
    About the ground line im not really sure what you mean, cant say that i am an electrician :P
    my first thinking about your problem is it may be from one of the mini dp ports or from one of the monitor. so if you had know about it we might have been solved the issue.
    from the ground i mean is your electric line grounded. if had see some situations where electric drains from graphics cards ports when the line is not grounded.

  • How to hold the Lightning effect still?

    Basically,the Lightning effect keeps "wriggling" from side to side - not the fixed end and start points, but the actual middle part. Is there any way to stop it moving to create a "glowing stick" ? (Premiere 11)

    NYinperth
    I have something for you to try in order to create your "still" glowing stick. It is not a freeze frame as I was suggesting before. Something else.
    1. Open Premiere Elements 11 and go to Text Menu/New Text/Default Text to bring up the Titler.
    2. The Titler has 4 sections: Text, Style, Animation, and Shapes.
    In the Text section, click on the Selection Tool to use for selecting the Add Text on screen. Hit Delete on the keyboard to get rid of Add Text.
    3. Go the Shape section of the Titler. Use the Rectangle Tool to draw out a rod. Then go to Style section.
    Find the Style named Bell Gothic Ice 26 and double click that Style. The rod that is selected on the screen should look like
    In the Titler, you can experiment with different Styles applied to the Shape if you want. To close out of the Titler, click on those two tiny triangles pointing right at the top right of the Adjustment Palette. If you want to re-edit the stick after you close the Titler, just double click the Title on the Expert workspace Timeline where you are working.
    That is just a rough starting point.
    Please let us know how that goes. You might even explore applying the Lightning Effect to a title  created in the Titler? Then freeze frame, then ChromaKey to get replace the black color that you are seeing with transparency so that that your image below shows.
    Or, you just might want to invest your time in some Photoshop tutorials on glowing rods that are all over the Internet.
    ATR
    Add On...Here is an example of Lightning captured via the Titler as I roughly mentioned.

  • Screen goes black for 3 seconds in premiere CS5 every time I click

    This is the first time I run Premiere CS5... On a fresh system install.
    I suspect it's not playing well with my video card, a Radeon HD 4870 with 1GB Ram... Very standard stuff.  I am running window 7 64 bit with 12 gb RAM, a week old build. I have all the updates and latest drivers, sigh. After Effects CS5 runs fine, Maya 2010 runs fine, Quicktime runs fine... What gives.
    Here's what happens: I only need to launch Premiere, right away I get the problem. The screen goes black 3 seconds before the prompt to create a new project. Once I create the project, the application workspace comes in, but if I click any menu, drag a tool window (whatever they are called), the screen goes black 3 seconds then comes back. Its basically impossible to work...Huge drag.
    Update:
    The problem stopped after I went into the 'device settings' in preferences and set the device to 'none'....When I clicked on the device settings panel, my monitor went black, and there was a 'no signal' warning that came up, as if the DVI-D  signal was dead. I was able to restore the signal by hitting ctrl-alt-del which switched me out of Premiere onto the desktop. Clearly, there is some issue with video. I switched back into Premiere and was able then to set to no devices.
    I'm not doing any capture at the moment, but I can only pray that it's some sort of bug related to not having a device connected? I plan on bringing footage from a RED in the next month. I upgraded to CS5 specifically so that I could use more than 4 gigs of RAM and for the new features.

    THank you for sending this.
    I followed the benchmark directions, and I get an error at the final step
    when I run the script:
    line 99
    Error: path not found
    I tried for an hour different things, namely to re run the whole test
    procedure, deleting the output files, etc... he script is looking for
    something in the preview files that it is not finding. I think the procedure
    was written for a previous version, because the metadata settings are
    different in my version of AME, and I don't know how much that affects it.
    Also, AME increments the file names when it renders them so that I did not
    get the right output file names at the first render. I had to turn off
    incrementing and manually name each clip before rendering. The vb scricpt
    looks for these names, so I understand it is important. I can't figure out,
    however, what the script is looking for in the preview folder and not
    finding.
    After spending almost two hours trying to troubleshoot the script, I gave
    up. I can tell you tho that it takes about 6-7 minutes on my box to encode
    all the videos.

  • My screen on my MacBook Pro keeps going black

    I got my MacBook in September of 2010. It's a 2.66 GHz Intel Core i7 with 4 GB 1067 MHz DDR3. I have had great luck with it, until recently. This problem has been going on since like August now and it's time I should quit ignoring it. For some reason when I am just using my computer normally my screen goes black. Everything seems to be disabled but the keypad still lights up. The only way to get my macbook working again to to forcefully shut it off and turn it back on. Sometimes when i use the mouse a certain way (such as sliding 3 fingers to view other open windows) it shuts off. I have also updated my software from Snow Leopard to OS X Lion. I don't know what could be causing it. I have had some issues sending in laptops before to get fixed but I have a feeling it's going to come down to that. I'm a college student and use my computer daily and being a broadcasting major I need this computer for everything I do. Can somebody please help?

    I had similar problem with my MacBook Pro. Login window goes black in 4 seconds, but it is not turned off. Push power and screen comes back but goes black again in 4 seconds. I can type in password, but before it logs me in, it goes black.   If I connect to external monitor, the screen stays up, and I can use extermal mouse but keyboard input is ignored.  This was obviously display problem of the Mac, at the least. (no clue why keyboard does not work when connected to external monitor.
    I have solution: Reset PRAM
    1. Power down Mac compeltely.
    2. Hold down Option, Command, P and R keys (four keys total) while you press power button to boot up Mac
    3. Mac will restart at least twice. Listen to noise.  After 2nd power up, lift all keys.
    I kept holding down the keys and Mac restarted like 5 times before I released keys, then rebooting stopped. Mac now works. The article I read said "wait for 2nd reboot". I though it would stop after twice.
    In my case, I think use of extranal monitor confused Mac Book Pro eventually. I see no other side effects (such as loss of data on hard disk, resetting clock, resetting default settings etc) while I do reset, so I think this is relatively safe thing to try.

  • Mac pro turns on but screen goes black after a while what could be wrong please help!!!

    Hello mac community, I am new,
    I updated a program today everything was working fine yesterday and now today I was updating PLAY a music engine program it seems to have caused the mac to go crazy. I also updated VE PRO 5 another music program. Everything has gone crazy. It turns on but then then the screen goes black after a while 5-10mins. I managed to get the crash report.
    Why is the graphics card all of a sudden effected by program updates.
    Sat Sep 28 10:49:06 2013
    panic(cpu 20 caller 0xffffff7f80f4775c): "ATICLASS::detectPowerDown: GPU is not found. PCI config access fails!!!\n"@/SourceCache/GraphicsDrivers/GraphicsDrivers-6.36.10/Common/IONDRV/ ATI/IOFramebuffer/ATIFramebuffer/Controller/Sources/R800/EvergreenClocks.cpp:825
    Backtrace (CPU 20), Frame : Return Address
    0xffffff83d2693a90 : 0xffffff8000204d15
    0xffffff83d2693b90 : 0xffffff7f80f4775c
    0xffffff83d2693bb0 : 0xffffff7f80f493dc
    0xffffff83d2693bd0 : 0xffffff7f8158cbe5
    0xffffff83d2693c00 : 0xffffff7f8158677c
    0xffffff83d2693c40 : 0xffffff7f80d9ac80
    0xffffff83d2693cc0 : 0xffffff7f80d99750
    0xffffff83d2693d00 : 0xffffff80005281dd
    0xffffff83d2693d70 : 0xffffff8000553deb
    0xffffff83d2693de0 : 0xffffff80002ba770
    0xffffff83d2693e50 : 0xffffff8000205536
    0xffffff83d2693e80 : 0xffffff80002029eb
    0xffffff83d2693ef0 : 0xffffff8000274176
    0xffffff83d2693f60 : 0xffffff80002c3095
    0xffffff83d2693fa0 : 0xffffff80002e4894
    Kernel Extensions in backtrace (with dependencies):
    com.apple.kext.ATIFramebuffer(6.3.6)@0xffffff7f81585000->0xffffff7f81598fff
                dependency: com.apple.iokit.IOACPIFamily(1.3.0)@0xffffff7f80800000
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0xffffff7f80804000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0xffffff7f80d88000
                dependency: com.apple.kext.ATISupport(6.3.6)@0xffffff7f80e02000
    com.apple.kext.ATI5000Controller(6.3.6)@0xffffff7f80f30000->0xffffff7f80f5afff
                dependency: com.apple.iokit.IOACPIFamily(1.3.0)@0xffffff7f80800000
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0xffffff7f80804000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0xffffff7f80d88000
                dependency: com.apple.kext.ATISupport(6.3.6)@0xffffff7f80e02000
    com.apple.iokit.IOGraphicsFamily(2.2.1)@0xffffff7f80d88000->0xffffff7f80daffff
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0xffffff7f80804000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
    System model name: MacPro5,1 (Mac-F221BEC8)
    System uptime in nanoseconds: 12612076511
    unloaded kexts:
    (none)
    loaded kexts:
    com.audinate.dante.driver.DanteVirtualSoundcard     0.9.3
    com.paceap.kext.pacesupport.snowleopard       5.8
    com.Areca.ArcMSR  1.3.3
    com.apple.filesystems.autofs    2.1.0
    com.apple.driver.AppleTyMCEDriver 1.0.2d2
    com.apple.driver.AGPM    100.12.31
    com.apple.driver.AppleHWSensor     1.9.3d0
    com.apple.driver.AudioAUUC    1.57
    com.apple.driver.AppleUpstreamUserClient       3.5.7
    com.apple.driver.AppleMCCSControl 1.0.20
    com.apple.driver.AppleMikeyHIDDriver      1.2.0
    com.apple.kext.ATIFramebuffer        6.3.6
    com.apple.driver.AppleIntelPenrynProfile   17
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AppleMikeyDriver    2.0.5f14
    com.apple.ATIRadeonX3000     6.3.6
    com.apple.driver.AppleIntelNehalemProfile        11
    com.apple.driver.AppleHDA      2.0.5f14
    com.apple.driver.AudioIPCDriver       1.1.6
    com.apple.driver.AirPortBrcm43xx     423.91.27
    com.apple.driver.Intel82574L    2.1.8b1
    com.apple.driver.AppleIntelMeromProfile   19
    com.apple.driver.AirPortBrcm43224  428.42.4
    com.apple.driver.ACPI_SMC_PlatformPlugin     4.7.0a1
    com.apple.driver.AppleLPC       1.5.1
    com.apple.driver.AppleIntel8254XEthernet 2.1.3b1
    com.apple.filesystems.ntfs        3.4
    com.apple.iokit.SCSITaskUserClient  2.6.8
    com.apple.iokit.IOAHCIBlockStorage 1.6.4
    com.apple.driver.AppleUSBHub 4.2.4
    com.apple.driver.AppleFWOHCI        4.7.3
    com.apple.driver.AppleUSBEHCI       4.2.4
    com.apple.BootCache       31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.driver.AppleAHCIPort       2.1.7
    com.apple.driver.AppleUSBUHCI       4.2.0
    com.apple.driver.AppleEFINVRAM    1.4.0
    com.apple.driver.AppleRTC       1.3.1
    com.apple.driver.AppleHPET     1.5
    com.apple.driver.AppleACPIButtons  1.3.6
    com.apple.driver.AppleSMBIOS        1.7
    com.apple.driver.AppleACPIEC 1.3.6
    com.apple.driver.AppleAPIC      1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient  142.6.0
    com.apple.security.sandbox      1
    com.apple.security.quarantine   0
    com.apple.nke.applicationfirewall       2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement   142.6.0
    com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8 - last loaded 12365095188
    com.apple.driver.AppleProfileReadCounterAction       17
    com.apple.driver.AppleProfileTimestampAction  10
    com.apple.driver.AppleProfileThreadInfoAction  14
    com.apple.driver.AppleProfileRegisterStateAction      10
    com.apple.driver.AppleProfileKEventAction        10
    com.apple.driver.AppleProfileCallstackAction     20
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
    com.apple.iokit.IOSerialFamily  10.0.3
    com.apple.driver.AppleHDAHardwareConfigDriver     2.0.5f14
    com.apple.driver.DspFuncLib    2.0.5f14
    com.apple.iokit.IONDRVSupport        2.2.1
    com.apple.iokit.IOAudioFamily  1.8.3fc2
    com.apple.kext.OSvKernDSPLib       1.3
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.iokit.IOFireWireIP     2.0.3
    com.apple.kext.ATI5000Controller     6.3.6
    com.apple.kext.ATISupport       6.3.6
    com.apple.iokit.AppleProfileFamily     41
    com.apple.driver.AppleHDAController        2.0.5f14
    com.apple.iokit.IOGraphicsFamily     2.2.1
    com.apple.iokit.IOHDAFamily    2.0.5f14
    com.apple.iokit.IO80211Family  320.1
    com.apple.driver.AppleSMC      3.1.0d5
    com.apple.driver.IOPlatformPluginFamily   4.7.0a1
    com.apple.driver.AppleSMBusPCI     1.0.10d0
    com.apple.iokit.IONetworkingFamily  1.10
    com.apple.driver.BroadcomUSBBluetoothHCIController     2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController    2.4.5f3
    com.apple.iokit.IOBluetoothFamily     2.4.5f3
    com.apple.driver.AppleUSBMergeNub       4.2.4
    com.apple.driver.AppleUSBComposite       3.9.0
    com.apple.driver.XsanFilter       402.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
    com.apple.iokit.IOBDStorageFamily   1.6
    com.apple.iokit.IODVDStorageFamily        1.6
    com.apple.iokit.IOCDStorageFamily  1.6.1
    com.apple.iokit.IOUSBUserClient      4.2.4
    com.apple.iokit.IOAHCISerialATAPI   1.2.6
    com.apple.iokit.IOFireWireFamily      4.2.6
    com.apple.driver.AppleFileSystemDriver    2.0
    com.apple.iokit.IOAHCIFamily   2.0.6
    com.apple.iokit.IOUSBFamily    4.2.4
    com.apple.iokit.IOSCSIParallelFamily        2.1.1
    com.apple.iokit.IOSCSIArchitectureModelFamily        2.6.8
    com.apple.driver.AppleEFIRuntime    1.4.0
    com.apple.iokit.IOHIDFamily     1.6.6
    com.apple.iokit.IOSMBusFamily        1.1
    com.apple.security.TMSafetyNet       6
    com.apple.kext.AppleMatch      1.0.0d1
    com.apple.driver.DiskImages    289
    com.apple.iokit.IOStorageFamily       1.6.3
    com.apple.driver.AppleACPIPlatform 1.3.6
    com.apple.iokit.IOPCIFamily     2.6.5
    com.apple.iokit.IOACPIFamily   1.3.0
    Cubase has this error
    Process:         Cubase 6 [222]
    Path:            /Applications/Cubase 6.app/Contents/MacOS/Cubase 6
    Identifier:      com.steinberg.cubase
    Version:         6.0.7.364 (6.0.7.364)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [144]
    Date/Time:       2013-09-28 10:50:35.845 +0100
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x000000012473fd9f
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   ???                             0x000000012473fd9f 0 + 4906548639
    1   dyld                             0x00007fff5fc0c839 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
    2   dyld                             0x00007fff5fc04d48 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
    3   dyld                             0x00007fff5fc08f68 dlopen + 490
    4   libSystem.B.dylib                 0x00007fff87a9be40 dlopen + 61
    5   com.apple.CoreFoundation          0x00007fff8223eef7 _CFBundleDlfcnLoadBundle + 231
    6   com.apple.CoreFoundation          0x00007fff8223de97 _CFBundleLoadExecutableAndReturnError + 1191
    7   com.apple.CoreFoundation          0x00007fff822cb30e CFBundleLoadExecutableAndReturnError + 14
    8   com.steinberg.cubase                  0x00000001011e8e55 CSOLOISTExtendedAnalysis::~CSOLOISTExtendedAnalysis() + 69941
    9   com.steinberg.cubase                  0x00000001011e93f0 CSOLOISTExtendedAnalysis::~CSOLOISTExtendedAnalysis() + 71376
    10  com.steinberg.cubase                 0x0000000100402690 0x100000000 + 4204176
    11  com.steinberg.cubase                 0x00000001011d8e77 CSOLOISTExtendedAnalysis::~CSOLOISTExtendedAnalysis() + 4439
    12  com.steinberg.cubase                 0x00000001011e86b7 CSOLOISTExtendedAnalysis::~CSOLOISTExtendedAnalysis() + 67991
    13  com.steinberg.cubase                 0x00000001011e892e CSOLOISTExtendedAnalysis::~CSOLOISTExtendedAnalysis() + 68622
    14  com.steinberg.cubase                 0x00000001011e8a64 CSOLOISTExtendedAnalysis::~CSOLOISTExtendedAnalysis() + 68932
    15  com.steinberg.cubase                 0x00000001007c68ab 0x100000000 + 8153259
    16  com.steinberg.cubase                 0x0000000100d149c0 0x100000000 + 13715904
    17  com.steinberg.cubase                 0x0000000101277b99 CSOLOISTExtendedAnalysis::~CSOLOISTExtendedAnalysis() + 654969
    18  com.steinberg.cubase                 0x0000000100d16dbd 0x100000000 + 13725117
    19  com.steinberg.cubase                 0x000000010116b048 0x100000000 + 18264136
    20  com.steinberg.cubase                 0x00000001000d39c4 0x100000000 + 866756
    Thread 1:  Dispatch queue: com.apple.libdispatch-manager
    0   libSystem.B.dylib                 0x00007fff87aaec0a kevent + 10
    1   libSystem.B.dylib                 0x00007fff87ab0add _dispatch_mgr_invoke + 154
    2   libSystem.B.dylib                 0x00007fff87ab07b4 _dispatch_queue_invoke + 185
    3   libSystem.B.dylib                 0x00007fff87ab02de _dispatch_worker_thread2 + 252
    4   libSystem.B.dylib                 0x00007fff87aafc08 _pthread_wqthread + 353
    5   libSystem.B.dylib                 0x00007fff87aafaa5 start_wqthread + 13
    Thread 2:
    0   libSystem.B.dylib                 0x00007fff87aafa2a __workq_kernreturn + 10
    1   libSystem.B.dylib                 0x00007fff87aafe3c _pthread_wqthread + 917
    2   libSystem.B.dylib                 0x00007fff87aafaa5 start_wqthread + 13
    Thread 3:  FThread
    0   libSystem.B.dylib                 0x00007fff87a95dce semaphore_timedwait_trap + 10
    1   com.steinberg.cubase                  0x00000001014f8437 CSOLOISTExtendedAnalysis::~CSOLOISTExtendedAnalysis() + 3278615
    2   com.steinberg.cubase                  0x00000001007c8be0 0x100000000 + 8162272
    3   com.steinberg.cubase                  0x00000001014f8eb0 CSOLOISTExtendedAnalysis::~CSOLOISTExtendedAnalysis() + 3281296
    4   libSystem.B.dylib                 0x00007fff87b7129a _pthread_body + 24
    Thread 4:
    0   libSystem.B.dylib                 0x00007fff87aafa2a __workq_kernreturn + 10
    1   libSystem.B.dylib                 0x00007fff87aafe3c _pthread_wqthread + 917
    2   libSystem.B.dylib                 0x00007fff87aafaa5 start_wqthread + 13
    Thread 5:
    0   libSystem.B.dylib                 0x00007fff87a95dda semaphore_timedwait_signal_trap + 10
    1   libSystem.B.dylib                 0x00007fff87ad4772 _pthread_cond_wait + 1015
    2   com.apple.CoreVideo                   0x00007fff82fbade6 CVDisplayLink::waitUntil(unsigned long long) + 252
    3   com.apple.CoreVideo                   0x00007fff82fba2a2 CVDisplayLink::runIOThread() + 644
    4   com.apple.CoreVideo                   0x00007fff82fb9fe3 startIOThread(void*) + 139
    5   libSystem.B.dylib                 0x00007fff87acefd6 _pthread_start + 331
    6   libSystem.B.dylib                 0x00007fff87acee89 thread_start + 13
    Thread 6:
    0   libSystem.B.dylib                 0x00007fff87aafa2a __workq_kernreturn + 10
    1   libSystem.B.dylib                 0x00007fff87aafe3c _pthread_wqthread + 917
    2   libSystem.B.dylib                 0x00007fff87aafaa5 start_wqthread + 13
    Thread 0 crashed with X86 Thread State (64-bit):
      rax: 0x00000001211f4000  rbx: 0x00007fff5fc43ae8  rcx: 0x00007fff5fc019df  rdx: 0x00007fff5fbfdd20
      rdi: 0x00000001211f4000  rsi: 0x00000001211f4000  rbp: 0x00007fff5fbfe170  rsp: 0x00007fff5fbfdce8
       r8: 0x0000000000000000   r9: 0x00007fff8abcf420  r10: 0x0000000000000000  r11: 0x00007fff8abcf420
      r12: 0x00000001224521e0  r13: 0x00000001211f4000  r14: 0x000000012473fd9f  r15: 0x00007fff5fbfdcf0
      rip: 0x000000012473fd9f  rfl: 0x0000000000010212  cr2: 0x000000012473fd9f
    Binary Images:
           0x100000000 -        0x1022a4fe7 +com.steinberg.cubase 6.0.7.364 (6.0.7.364) <CFFF5ABF-970D-896D-4A88-78FFF87878C1> /Applications/Cubase 6.app/Contents/MacOS/Cubase 6
           0x10268c000 -        0x1026dcff7  com.apple.audio.midi.CoreMIDI 1.7.1 (42) <E7DBCE93-A637-ABA2-B623-6A76B82EE243> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
           0x102704000 -        0x10270aff7  com.apple.agl 3.0.12 (AGL-3.0.12) <014CA38F-CB49-8214-4C16-DF73FC6EFCE1> /System/Library/Frameworks/AGL.framework/Versions/A/AGL
           0x105f00000 -        0x105f89ff2 +com.eLicenser.POSAccess-DLL ??? (1.12.1.0) <66A02345-5109-F38C-1262-D00D8189324C> /Library/Application Support/eLicenser/pos/Synsoacc.bundle/Contents/MacOS/Synsoacc
           0x1170a6000 -        0x1170ccfff  GLRendererFloat ??? (???) <38621D22-8F49-F937-851B-E21BD49A8A88> /System/Library/Frameworks/OpenGL.framework/Resources/GLRendererFloat.bundle/GL RendererFloat
           0x11a17a000 -        0x11a30dfe7  GLEngine ??? (???) <BCE83654-81EC-D231-ED6E-1DD449B891F2> /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
           0x11a33e000 -        0x11a730fff  com.apple.ATIRadeonX3000GLDriver 1.6.36 (6.3.6) <282E53E2-ABB3-B97D-F298-6A8FE21F3A5A> /System/Library/Extensions/ATIRadeonX3000GLDriver.bundle/Contents/MacOS/ATIRade onX3000GLDriver
           0x11b243000 -        0x11b249fe7  libFontStreams.A.dylib 545.0.0 (compatibility 64.0.0) <87272933-FB21-81D0-00E6-92BC3D7583FB> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libFontStreams.A.dylib
           0x1211f4000 -        0x121303fff +com.steinberg.omffilter 4.0.0.179 (4.0.0.179) <C05588E9-6173-ECEF-2BF1-92AE05B78913> /Applications/Cubase 6.app/Contents/Components/omffilter.bundle/Contents/MacOS/omffilter
        0x7fff5fc00000 -     0x7fff5fc3bdef  dyld 132.1 (???) <69130DA3-7CB3-54C8-ABC5-423DECDD2AF7> /usr/lib/dyld
        0x7fff80003000 -     0x7fff80059fe7  libTIFF.dylib ??? (???) <2DBEC120-DAA7-3789-36A2-A205BCDF2D72> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
        0x7fff8008f000 -     0x7fff8011ffff  com.apple.SearchKit 1.3.0 (1.3.0) <4175DC31-1506-228A-08FD-C704AC9DF642> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
        0x7fff80132000 -     0x7fff80179ff7  com.apple.coreui 2 (114) <923E33CC-83FC-7D35-5603-FB8F348EE34B> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
        0x7fff80453000 -     0x7fff8048dfff  libcups.2.dylib 2.8.0 (compatibility 2.0.0) <4F2A4397-89BD-DEAC-4971-EE838FFA0964> /usr/lib/libcups.2.dylib
        0x7fff80c2c000 -     0x7fff81626ff7  com.apple.AppKit 6.6.8 (1038.36) <4CFBE04C-8FB3-B0EA-8DDB-7E7D10E9D251> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
        0x7fff81627000 -     0x7fff816dcfe7  com.apple.ink.framework 1.3.3 (107) <8C36373C-5473-3A6A-4972-BC29D504250F> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
        0x7fff8189e000 -     0x7fff81938fff  com.apple.ApplicationServices.ATS 275.19 (???) <2DE8987F-4563-4D8E-45C3-2F6F786E120D> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
        0x7fff8199c000 -     0x7fff81c1efff  com.apple.Foundation 6.6.8 (751.63) <E10E4DB4-9D5E-54A8-3FB6-2A82426066E4> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
        0x7fff81c1f000 -     0x7fff81c1fff7  com.apple.Carbon 150 (152) <C0E61968-57F3-6EE1-8524-32A18955BAF0> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
        0x7fff81c20000 -     0x7fff81c26ff7  com.apple.CommerceCore 1.0 (9.1) <3691E9BA-BCF4-98C7-EFEC-78DA6825004E> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/Frameworks/C ommerceCore.framework/Versions/A/CommerceCore
        0x7fff81c7f000 -     0x7fff81c8cfe7  libCSync.A.dylib 545.0.0 (compatibility 64.0.0) <1C35FA50-9C70-48DC-9E8D-2054F7A266B1> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
        0x7fff81c8d000 -     0x7fff82196ff7  com.apple.RawCamera.bundle 3.14.0 (646) <75A96BFC-1832-808B-F430-C4C9379C5A98> /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
        0x7fff82197000 -     0x7fff821ecff7  com.apple.framework.familycontrols 2.0.2 (2020) <F09541B6-5E28-1C01-C1AE-F6A2508670C7> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
        0x7fff821ed000 -     0x7fff821f1ff7  libCGXType.A.dylib 545.0.0 (compatibility 64.0.0) <DB710299-B4D9-3714-66F7-5D2964DE585B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXType.A.dylib
        0x7fff821f4000 -     0x7fff8236bfe7  com.apple.CoreFoundation 6.6.6 (550.44) <BB4E5158-E47A-39D3-2561-96CB49FA82D4> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        0x7fff823b7000 -     0x7fff82482fff  ColorSyncDeprecated.dylib 4.6.0 (compatibility 1.0.0) <86982FBB-B224-CBDA-A9AD-8EE97BDB8681> /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ColorSync.f ramework/Versions/A/Resources/ColorSyncDeprecated.dylib
        0x7fff82483000 -     0x7fff824c1fe7  libFontRegistry.dylib ??? (???) <395D7C0D-36B5-B353-0DC8-51ABC0B1C030> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
        0x7fff824c2000 -     0x7fff82681fff  com.apple.ImageIO.framework 3.0.6 (3.0.6) <92882FD3-CB3F-D0BE-DDDA-43B4BEE10F58> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
        0x7fff82682000 -     0x7fff82686ff7  libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <95718673-FEEE-B6ED-B127-BCDBDB60D4E5> /usr/lib/system/libmathCommon.A.dylib
        0x7fff82687000 -     0x7fff82687ff7  com.apple.Accelerate 1.6 (Accelerate 1.6) <15DF8B4A-96B2-CB4E-368D-DEC7DF6B62BB> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
        0x7fff82688000 -     0x7fff82745fff  com.apple.CoreServices.OSServices 359.2 (359.2) <BBB8888E-18DE-5D09-3C3A-F4C029EC7886> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
        0x7fff82746000 -     0x7fff82747ff7  com.apple.audio.units.AudioUnit 1.6.7 (1.6.7) <49B723D1-85F8-F86C-2331-F586C56D68AF> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
        0x7fff827c6000 -     0x7fff827d7ff7  libz.1.dylib 1.2.3 (compatibility 1.0.0) <97019C74-161A-3488-41EC-A6CA8738418C> /usr/lib/libz.1.dylib
        0x7fff827d8000 -     0x7fff82842fe7  libvMisc.dylib 268.0.1 (compatibility 1.0.0) <AF0EA96D-000F-8C12-B952-CB7E00566E08> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
        0x7fff82843000 -     0x7fff82959ff7  libxml2.2.dylib 10.3.0 (compatibility 10.0.0) <3814FCF9-92B9-A6AB-E76A-F7021894AA3F> /usr/lib/libxml2.2.dylib
        0x7fff82cad000 -     0x7fff82ccdfff  com.apple.DirectoryService.Framework 3.6 (621.16) <0ED4A74A-F8FB-366D-6588-F13EA397326F> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
        0x7fff82da6000 -     0x7fff82e24ff7  com.apple.CoreText 151.13 (???) <5C6214AD-D683-80A8-86EB-328C99B75322> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
        0x7fff82e25000 -     0x7fff82f5afff  com.apple.audio.toolbox.AudioToolbox 1.6.7 (1.6.7) <F4814A13-E557-59AF-30FF-E62929367933> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
        0x7fff82fb5000 -     0x7fff82fb7fff  com.apple.print.framework.Print 6.1 (237.1) <CA8564FB-B366-7413-B12E-9892DA3C6157> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
        0x7fff82fb8000 -     0x7fff82fddff7  com.apple.CoreVideo 1.6.2 (45.6) <E138C8E7-3CB6-55A9-0A2C-B73FE63EA288> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
        0x7fff82fde000 -     0x7fff8311cfff  com.apple.CoreData 102.1 (251) <9DFE798D-AA52-6A9A-924A-DA73CB94D81A> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
        0x7fff8311d000 -     0x7fff831cdfff  edu.mit.Kerberos 6.5.11 (6.5.11) <085D80F5-C9DC-E252-C21B-03295E660C91> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
        0x7fff831ce000 -     0x7fff8328ffef  com.apple.ColorSync 4.6.8 (4.6.8) <7DF1D175-6451-51A2-DBBF-40FCA78C0D2C> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
        0x7fff832c0000 -     0x7fff8339dfff  com.apple.vImage 4.1 (4.1) <C3F44AA9-6F71-0684-2686-D3BBC903F020> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
        0x7fff8339e000 -     0x7fff8339eff7  com.apple.vecLib 3.6 (vecLib 3.6) <96FB6BAD-5568-C4E0-6FA7-02791A58B584> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
        0x7fff8339f000 -     0x7fff8369dfff  com.apple.HIToolbox 1.6.5 (???) <AD1C18F6-51CB-7E39-35DD-F16B1EB978A8> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
        0x7fff8369e000 -     0x7fff836c0ff7  libexpat.1.dylib 7.2.0 (compatibility 7.0.0) <8EC31253-B585-D05E-F35D-AE3292FB790B> /usr/lib/libexpat.1.dylib
        0x7fff83722000 -     0x7fff8376bfef  libGLU.dylib ??? (???) <B0F4CA55-445F-E901-0FCF-47B3B4BAE6E2> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
        0x7fff8376c000 -     0x7fff83851fef  com.apple.DesktopServices 1.5.11 (1.5.11) <39FAA3D2-6863-B5AB-AED9-92D878EA2438> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
        0x7fff8389f000 -     0x7fff838e2ff7  libRIP.A.dylib 545.0.0 (compatibility 64.0.0) <5FF3D7FD-84D8-C5FA-D640-90BB82EC651D> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
        0x7fff83904000 -     0x7fff83904ff7  com.apple.ApplicationServices 38 (38) <10A0B9E9-4988-03D4-FC56-DDE231A02C63> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
        0x7fff83914000 -     0x7fff83af6fef  libType1Scaler.dylib ??? (???) <7892C4D7-3E5E-D7DA-AA4E-8D4ACED143D9> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libType1Scaler.dylib

    I havent had the exact same problem as you but I am having a similar problem where lately I noticed when working in Pro Tools (mainly because I use my mac pro for audio work) or even when on the internet whatever it may be that my screen has been flickering a little bit or gets slightly glitchy.
    Yesterday upon startup for the first time the screen went black. Had to do a force shutdown. Unplugged all external devices. Reset everything as well. Slowly checked everything was on the phone with Apple even during the process. Seemed to correct the issue. Then of course I get off the phone, restarted my computer and it goes black randomly again.
    Rebooted fine. Checked all my hard disks internal and external, verified and repaired permissions on main drive and clone. Since then nothing yet...But I still feel its either the Video Card or the Monitor as everything else is fully operational.
    I plan on taking it in to look at as my applecare is up in November but I cant point my finger on it. And really am trying to avoid lugging the mac pro and monitor in at the same time...(Not the easiest thing with lack of parking in nyc..)
    If the display was dying I feel like it would have konked out already.
    The funny thing is I have had to replace video cards and monitors in the past but this time I cant quite figure out what the **** is going on.
    I am leaning towards the video card as I noticed it flickered a little when opening plug in windows in pro tools or multiple windows in sfari but it doesnt make sense.
    Worst part is I cant do a hardware test cause for some reason this computer doesnt have the software installed. It does nothing when I hold down the D button...
    I  totally baffled but the randomness of this.

  • The screen goes black.

    The screen goes black, but the system keeps running. I have to hold the power button to shut it down. This usually happens when Im running 2 -3 softwares at a same time. I work on softwares such as photoshop , adobe premier, after effects, and flash extensively. Its been happening since a year now. I have not upgraded my system yet, its still running on 4 gb ram. Please help me with your valuable information. Do I require to format or upgrade my system if yes then please specify. 

    Hello kbabb29:
              Sorry to hear about this but welcome to HP foium. Your computer comes with a one year warranty . So take advantage of it. Contact HP  Direct Support on line chat  and they will help you with troubling shooting and making adjustments to hibernation mode software. If they are not able to help you then repost. Most likely it was software not installed right. Like my computer was. I was missing some software completely and HP Direct Support gave me the links for the missing software.

  • HDX18T Monitor Goes Black

    For the past week or so, I've had to move the power plug around to get the laptop to charge. I determined that it's not the cable, but is the internal part. Today, when I opened the lid to bring the laptop out of sleep mode, my desktop displayed for a second or two, and then went blank. I've re-started several times, removed the battery and held the power button, but it doesn't help. Originally, it would go blank as soon as Windows started to load, so I tried Safe Mode, with the same result. Now, when I turn on the laptop, I might see the HP logo and/or the blinking cursor, and then the screen goes black.
    I hooked it up to an external monitor, which worked, until I tried to uninstall the display driver, in hopes that it would correct itself, now I don't get anything on the external monitor either.
    I suspect that it must be the graphics card, but not sure. One other thing that happened occasionally, if I bumped the side of the laptop, near the HDMI and USB ports on the left side of the laptop, against something metal, the screen would go black for a split second. Seemed like an electric short.
    Thank you for any help you can provide. I'm okay with replacing parts, although not my favorite. I did replace the keyboard with the lighted keyboard a  year ago.

    That's too bad that the lamps are gone, but here are some alternatives.
     http://www.laptopscreen.com/English/currency/USD/laptop-part-number/HP-Compaq/HP%20HDX%20X18-1000EO/
     http://cgi.ebay.com/18-4-LCD-Screen-Dual-Lamp-CCFL-Bulb-HP-HDX-X18-1114TX-/150610885160?pt=LH_Defaul...
     http://www.ameytech.com/data/ebay/kanni007/images/ccfl/instructions/ccfl-installation-instructions1....
     The new screen is probably the best way to go, but removing it from the bezel is a challenge, after the hinges are removed, the screen is still held in there with this double sides sticky tape. If you use a very hot hair drier, starting at one of the upper corners, the adhesive can be softened enough to begin prying the bezel away from the screen. It takes awhile for the hair dryer to soften the adhesive so give yourself lots of time for this procedure.
     When the new screen is installed it's very difficult to get every last crumb of debris out from under the bezel, so keep this in mind.
     Another option is to replace the bulbs, I tried this ounce on an old screen that I didn't care about and it did not go well. I could not separate the parts that were taped together without damaging them. This would be the least expensive way to go if you can remove the bulbs.
     I am also assuming that it's the 1920 X 1080 screen with the dual lamp arrangement _ some of them used screen with lower resolution with one CCFL lamp. (Yours is probably the dual lamp assembly) 
     There is also a used complete screen assembly available on e-bay, but eventually it may succumb to you fate in a few days or a few years, there is no way of knowing.
     The part number for the complete display assembly is 498166-001 and it is available from HP, but it's expensive.
     http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=F747349FA1494EEDA36B3303FEC30A7A&Searc...
     The other thing that I have not mentioned is that it may a faulty cable, perhaps the wires that supply the voltage to the inverter board have become internally frayed. This is a common occurrence, but usually this also effects the picture as well.
     Here is the part number for the cable 496876-001. These can be found on e-bay and some of them are new.

  • Nokia N8 screen goes black in sunlight

    I have this peculiar problem. Whenever i make a call walking in broad daylight (exposing the screen to the light) the screen goes black and it takes sometime before i am able to hold or end that particular call. This happens only when i make a call under sunlight. I have tried closing/opening the light sensor near the top end of the phone, but no effect anyway. Why does this happen?
    Solved!
    Go to Solution.

    ddexter wrote:
    Finally, I think i have found the solution! I noticed that this problem always happens when I recieve a call with the handset in a locked state. So, when i pressed the lock key on the side of the handset (during a call with 'screen blackout'), the screen came alive again!
    But, nokia should correct this bug. Hope this helps others...
    That ain't a solution. It's a work around, but a very annoying one.
    I have a question. When you swipe your nail on th screen from left to right or from the right to left and go over the frame, do you feel that the display is lower than the frame?
    On flawless N8's, you shouldn't hang with your nail at the frame.. 
    I say this is a hardware issue. I have two N8's and one has the same issue. Turning the Light Sensor down doesn't help. And the affected N8 has a display that is lower than the frame and you will hang at the frame with your nail when doing the swipe move on the display.

  • Hp2509m goes black too fast to use any of the fixes

    I have read, and tried to use, many of the previous forum answwers regarding an HP monitor screen going black.  For example resetting the MENU to FACTORY DEFAULT; correcting OCD display errors; power-cycling; tenacity and patience with repeatedly pressinfg MENU, +/-, and volume  et al.  My problem:  the screen will not stay lit long enough to effectively use/try any of the remedies mentioned!  One other forum mentioned he could 'see' the menu using a flashlight up tp the screen even when dark - well mine goes absolutely black!
    I hooked up an old monitor to be sure it wasn't a video card and the monitor works great.  
    It is an HP2509m that has worked great for years until trying to turn it on two days ago!  It is attached to my HP Pavilion p6267c that i have had since 2010.
    What else can I try?  Thanks in advance.

    Hi,
    Try the monitor and cable on a different PC to see if you have the same issues.
    Remove the power and data cables and hold down the power button for 60 seconds. Now give it a go.
    You might try Google "HP2509m repair" and see what others have said about repair issues.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Mac OS X 10.6.8 desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fixed?

    Mac OS X 10.6.8 statup problem: desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fixed?

    You need to fresh install 10.6, programs fresh form original sources and return only vetted files (no TM migrations) from a regular storage drive
    But this when erasing the drive use the Security Option: Zero All Data before installing 10.6
    What has happened your data got corrupted and it's corrupted on the TM drive too.
    So the Zero will map off bad sectors on your drive, the 10.6 install will be fresh, the programs will be fresh and only files will be returned, you'll find out in short order which ones they are.
    Reducing bad sectors effect on hard drives
    How to erase and install Snow Leopard 10.6
    Once you are back up, then consider making a option key bootable clone.
    Most commonly used backup methods explained

  • MBP Bad Display? Goes black randomly.

    I am having an issue with my Macbook Pro display which I have seen many variants of surfing the intertubes here. The screen goes black more or less at random. I am hoping to avoid having it serviced as my black tie service plan expired last november (bought this at Best Buy.) When the screen is black the computer is still running.
    This has been happening intermittently for a while now, and in the past week has rendered my MBP effectively unusable.
    Before making any suggestions, please read this list of commonly suggested ideas I've tried which did not solve the issue:
    The power saver/display sleep is set to 1 hour, it is not coming on.
    The screen saver is set to “never”.
    I ran a software update a couple days ago.
    Shutting the lid and waking the machine back up doesn’t matter.
    F2 (increase screen brightness) doesn’t matter.
    Dimming the screen (holding F1 for about 10 seconds) before increasing screen brightness also has no effect.
    My external display WORKS, I can shut my lid and use my computer normally with external display, keyboard, and mouse. I believe this rules out the display board issue: http://support.apple.com/kb/TS2377
    Holding a LED flashlight up to the screen does not seem to matter. I’ll try again in a darker setting (it’s very bright right now) to rule it out definitively but I don’t think the backlight is affected (you can see a slight glow in the dark.)
    I already reset the PRAM.
    I already reset the SMC.
    I already reset the PMU.
    I already attempted the MBP pro video update http://support.apple.com/kb/TS4088 which said it is not supported on my system (I was pretty sure it wasn't applicable but worth a shot.)
    I don't *THINK* it's the inverter cable as wiggling the display lid does not APPEAR to affect it, which leads me to believe the cable is still flexing without a problem.
    Doesn't seem like the display is bad as it comes sometimes on and the backlight still works, but I don't know. Since the MBP is no longer under warranty, I am not necessarily opposed to getting under the hood and replacing something as long as I know what to replace. The inverter cable looks easy (ish) but I don't know if that's the answer.
    Have I effectively ruled out everything other than the display? Any insight?

    Hello, I dont know if might be of help to you. The 17" early MBP had a problem with the onboard Graphics Processor overheating. A fix for this is to have the GPU remounted ( I think the tech term is "reballed") there are a number of companies who can do this for you, you will need to search for a local one to you. I dont know if this was a problem with the 15" version.
    Hope this helps
    David

  • Premiere CS4 timeline goes black - refresh problem?

    Every time I try to edit in premiere pro CS4, after a while (or straight away) the timeline goes black. Everything around the clips (not including the clips) goes black and I can see anything on the timeline except the clips. If I move the timeline off the screen and back on it refreshes normally? This problem in intermittent by persistent. I have done all the updates for premiere and my graphics card.
    My system is:
    OS: Win7 64Bit
    Intel core i7 920
    6GB Ram
    ATI HD5770 1GB GDDR5
    C drive is 200GB SATA1
    Thanks

    Hi,
    I had an almost identical problem.
    Windows 7 64bit
    Premiere Pro CS4 4.2.1
    Cineform neoscene
    Nvidia GT240 (latest driver 257.21)
    Premiere pro would work fine until I loaded up internet explorer, then the timeline would go black as soon as I dragged a clip around. I needed to completely log out of windows to get the timeline visible again after moving a clip.
    I switched to firefox, but that had the same effect.
    However I then tried the seamonkey browser and premiere now works fine!
    Hope this helps.
    Kerrin

  • Images going black

    I use a Dual G5 2.5GHz with 2 GB ram. I shoot my images with a Nikon D200 in raw format. The G5 has a ATI Rad9800 XT with 256 MB DDR using a 23 inch Apple display. I have two internal 250GB 7200rpm drives plus 3 external 250GB LaCie drives.
    I'm running the latest version of OSX.
    Ever since I upgraded to Aperture 1.2 I have been experiencing images going black after I have been working for 5-10 minutes and using the crop tool or even the exposure tool. I thought version 1.5 would eliminate the problem.
    Is it my system? Should I add more ram? De-frag the hard drive?
    Do I have to upgrade my video card?
    Could all of my external firewire drives be causing any problems?
    (Maybe I should try Aperture with all of the drives off ??)
    It's just getting a little frustrating having a lot of images to work with and then running into the blacked out image with high regularity.
    Any suggestions would be greatly appreciated !

    I also have the same problem (Dual 2.0GHz G5 with 2.5GB RAM and Radeon 9650 gfx card at 1920x1200 res screen - all my photos are RAW Canon 20D).
    It almost seems like a problem with how the graphics card handles it's image overlays. I find the black image will often appear if I try and switch between images before the previous one has completed its display adjustments (i.e. the status monitor is still showing heavy CPU usage). I find that clicking and slightly resizing the display window shows the photo again until I let go of the mouse button, at which point it goes black again. Sometimes instead of black I have a solid grey fill instead.
    Once the black image effect has started I also find that the handles when resizing an image or text area in the photo book editor disappear.
    I also find though that the loupe tool never seems affected so I often end up using that for a while rather than having to restart Aperture again!

  • Apple TV stops streaming via AirPlay when iPhone 6 Display goes black

    Hi,
    when my iPhone gets locked and the Display goes black (standby) after 2 Minutes, my AirPlay stream to my Apple TV 3. Gen stops playing. Only when i set the standby/lock time time to never instead of 2 Minutes (and the screen is on all the time) the Stream wont stop.
    Sometimes the stream does not stop, wenn my iPhone Screen goes black.
    This also happens with an iPad Mini or using an Lightning to HDMI Adapter instead the Apple TV.
    I have no idea why.
    Please help.
    Best regards
    Sebastian

    On a sidenote, I also have an ipad and normally homesharing with the ipad works fine, but after having an apple tv incident, I have to restart the mac for homesharing to work with the ipad

Maybe you are looking for

  • Job Schedule - Doesn't auto run at a given time.

    Hi I hope you can help. I have set up the job below: DECLARE X NUMBER; BEGIN [i] SYS.DBMS_JOB.SUBMIT ( job => X ,what => 'REPORTING_API_12_IR02;' ,next_date => to_date('13/02/2006 15:58:27','dd/mm/yyyy hh24:mi:ss') ,interval => 'TRUNC(SYSDATE+1)' ,no

  • How can I remove a mail account that does not show up in Internet Accounts?

    I have a Mail account that I cannot remove because it does not show up in System Preferences > Internet Accounts.  How can I remove this account permanently? Here is the account in Mail: Here is what I get when I try to remove it: Here is what shows

  • Should i store my .doc's in the database or not

    hi ! i've got a website and i want users to be able to upload and download ms word files (.doc) from the site.. right now i am using simple url's saved in the database and the files themselves reside in my OS's file system.. i know that i can put the

  • Opening layered files that flatten

    Why are my layered tiff files flattening when I open them? I do get this message when that happens: This image was generated from source data that Photoshop cannot read. That data will be discarded. Continue reading? My layers are vector files from I

  • Workforce Planning through Portal

    Hi All, Please help me out with the issue mentioned below, Users are accessing SAP through a portal and most of the project activities done by the Managers is through portal only. Managers are using the transaction CMP2 for workforce planning but off