Lightning (F) to 30 pin (M) adapter

I have an older i-pod, 30 pin. I just received a new docking station that has the lightning pin(?) for the i-phone 5. I need an adapter that goes from the lightning pin to the 30 pin (female lightning and male 30 pin.) Has anyone heard of this?  Thank you

Have been trying to locate a lightning female to 30 pin male adapter for a friend with a mix of iOS devices and have had limited success.
MiniInTheBox.com has a corded-style adaptor which might work:
http://www.miniinthebox.com/lightning-female-connector-to-30-pin-male-connector- cable-15cm_p693543.html?currency=USD&litb_from=paid_adwords_shopping&gclid=CMin6 qXD4LsCFfBcMgodKBYADA#prod_description
I have no experience with this vendor so cannot offer any comment regarding them. As with all third-party Apple adaptors, this adaptor could support only power as no details as to operational support are shown.
Another adaptor by Sandberg has been discontinued by the manufacturer but might still be found somewhere.
http://www.sandberg.it/product/Adapter-30pin-M-to-Lightning-F
This was offered on Amazon UK but they are currently out of stock - which is likely permanent if the manufacturer had discontinued the adaptor.
http://www.amazon.co.uk/Sandberg-Adapter-30pin-Lightning-440-45/dp/B009KZZ3LC
When I called my local Apple Store, I received a very polite but suspiciously contrived answer that Apple is "focused on forward planning" so did not offer a reverse Lightning to 30-pin adaptor. It had the quality of an official talking point given to employees for use in such circumstances.
From the rumors on the Web about Apple disallowing new iOS docking offering both a Lightning and 30-pin adaptor, the lack of a reverse Lightning to 30-pin adaptor could be related?
So while one of the above devices COULD do the job (if you could obtain it!), you would be taking a chance that everything would work correctly!
Good luck!

Similar Messages

  • How can you utilise the 30 pin VGA adapter used on the iPad 3 and iPhone 4S on the iPad 4 which uses a lightning connector?

    How can you utilise the 30 pin VGA adapter used on the iPad 3 and iPhone 4S on the iPad 4 which uses a lightning connector?

    See the following. Also take note below and from the linked page above that video mode is NOT supported:
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
    *Note below and from the linked page above that video mode is NOT supported*
    "This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported."

  • I need a female lightning to 30 pin male adapter

    I have a ihome stereo that has a male lightning dock, I need adapter to make that a male 30 pin so I can dock my 4s without using a cable.

    I think you are describing the exact opposite of the guidance above
    You have a dock with a lightning plug and you want a adapter to use a device with a 30 pin socket
    The only one I have found is made by sandberg and is available on Amazon in Uk certainly so likely elsewhere
    I have one does exactly as you would expect Sound,charge and sync
    Sandberg 440-45

  • IPad mini with 30 pin HDMI adapter

    Hi,
    I have iPad mini and "lightning to 30 pin converter". I want to buy 30 pin HDMI Adapter (for iPad 2). I want to know that if I connect that 30 pin HDMI adapter to my iPad mini with the help of "lightning to 30 pin converter", will it work on my device?
    Thanks in advance...

    Cleaning the docking port didn't help. My other accessories still work.

  • 30 pin lightening adapter

    Can you use a ipad mini 30 pin lightening adapter with a  camera adapter to download pictures to the mini

    No.
    Buy a lightning camera adapter.

  • HT1665 Why when I put my 30 pin lightening adapter to a charger it comes up with "30 pin lightening adapter is not supported by this device "  how do I support it

    The 30 pin lightening adapter is apparently not supported by my ipod 5th generation how do I support it

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • Can I connect my lightning to USB to a travel adapter?

    I have a travel adapter model: TC28SA. I used it to charge older iPods with a 30-pin charger. Can I also use it with my lightning to USB?

    I do not know what adopter you are talking about. However, if the adopter has a standard USB port then that can be used to charge your iPod via the Lightning/USB plug.

  • IPhone 5 Lightning to old 30 Pin Connector with FireWire Power implementation

    I've been searching the Web and specialized Shops for a Adapter or Cable-Hack Solution.
    Here the Challenge:
    I am using a Car Audio Connector (Becker Indianapolis 7953 + Remote Kit for iPhone).
    It's connected to my iPhone 5 using a Lightning to 30-Pin Adapter.
    Connection Works great, regarding to Music and iPhone Control.
    Problem is the Connector is using a old implementation which is using the FireWire Pins for charging, which obviously doesn't work with iPhone 3G and later - so iPhone doesnt Charge.
    I am wondering if there is a Solution like: Cut the Cable and put it together in the right Way? Or an Lightning Adapter to old 30-Pin?
    I've found a old 30-Pin FireWire implementation to 30-Pin Adapter, but I don't want to use a Adapter-Adapter-Solution. :-(
    Any ideas or experiences? Thanks alot!

    Hi
    I have the Becker Cascade with the iphone adapter.
    The only solution I could find then was with the adapter. I found some info on rebuilding the iphone adapter but in essence it does the same as the firewire to usb power adapter.(I use the Scosche adapter)
    So don’t worry about the adapter adapter solution regarding the firewire problem. It works great for me.
    I use the iPhone 4 dock in the creditcard compartment (Audi A4), The only problem i got was that the dock does not pass thru all 30 pins. it splits out the audio to the Stereo jack. That i solved whit replacing the 30 pin connector with an angled one.
    This alone makes me think twice about changing to iPhone 5. Cant se any solution regarding the cradle. I love the hidden installation in the Creditcard compartment. Just a click and i can insert my phone.

  • Mac mini: VGA (HD-15) monitor & pin-switch adapter

    My daughter is thinking of buying a Mac mini for her young daughter. I have a Samsung 172V 17" monitor, which has a VGA (HD-15) connector, which I have given them. The Mac mini specs. say that with its own adapter, one can use a VGA monitor, but do not specifically say that the HD-15 pin configuration is correct. Will it work?
    I used to use the Samsung monitor myself with an old beige tower G3 Mac, and I had to interpose a Lindy adapter with 5 pin-switches. No-one could tell me the right switch positions; the ones specified by Lindy, and even the one recommended by Lindy's technical advisor, did not work. I finally found the right switch-combination by extensive trial and error (1 and 5 on, in case anyone wants to know), but I wonder whether anyone out there knows (a) whether the Lindy adapter will be needed if the Samsung monitor can be used with the Mac mini, and (b) what the right switch combination would be, if so.
    I should be very grateful for any advice.

    It will work with your HD15 cable directly in the Apple adapter shipped with the mini.
    Old Macs had different video ports requesting adapters with lots of switches (mine had 8 !)
    My old VGA monitor works very well with my mini.

  • Lightning to HDMI/& 30 pin stopped working since OS update

    Purchased lightning to HDMI & lightning 8 pin to 30-pine adapters & since I updated to 7.1.2 they don't work on my iPhone 5s or iPad Air. But my lightning to SD Card does work.  Anyone else?  Anyone with support?

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    2) Reboot
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • D10 power help -- psu power supply 10-pin power adapter

    i have a d10 motherboard, and i've fit it into an intel server chassis.
    the PSU installed has an aux-power adapter, but it is a 4-pin used for intel server boards.
    i need to convert some of the extra cables from the PSU in my chassis to work with the 10-pin connector on the motherboard (next to the 24-pin connector).
    if someone could help me out and maybe provide me with adapter information, voltage information, any information.....that would be a great help.  a diagram of sorts would be greatly appreciated.  or maybe even a picture of the actual 10-pin cable going from the PSU to the motherboard??
    thank you!!

    Quote from: Mummy on 23-November-13, 14:32:52
    Hi
    Yeah take the MB out of case and plug in only: CPU, PSU, 1 Memory stick (to secend slot from CPU) and monitor to MB back.
    If it dont boot up after that and show error for not finding KB, then what code it has on debug led?
    Hope this helps  Cheers Mummy
    Disconnected everything from motherboard except CPU + cooler & second RAM DIMM, set it on a cardboard box, plugged in 20+4 main power connector and the 8 and 4+4 CPU power connectors, then tried powering up again. Couldn't connect a display because I don't have an HDMI display handy - but I figure that doesn't matter much if power isn't even on long enough for BIOS to begin loading anyway. Nothing new happened. Unfortunately, a debug code never comes up. 

  • IEEE 1394 six pin to four pin firewire adapter

    Does anyone know where I can find an adapter to go from IEEE 1394 six pin (ipod cable) to IEEE 1394 four pin (on my laptop)? It's mentioned in my U2 owners manual, but I can't find one. Thanks.
    Oops... wrong catagory-sorry-I put this question under Ipon connecting to Windows.
    Message was edited by: i4st8

    here is a variety:
    http://fwdepot.com/thestore/default.php/cPath/2_29

  • Anyway to get 4-pin - 8-pin SSI adapter (for K8N-Master2)

    I have a 550W Yesico Fanless PSU (with +12VDC/18A rail), and it lacks the 8-pin SSI connector which is used on the board as PWR2 connector. Is there a 4-pin -> 8-pin adapter available in somewhere?
    At the moment I have used a two 4-pin connectors, one standard and one carved with a knife to match the holes on the connector (works fine, it just your standard +12V). And atleast at my setup, I need to hook up all three PWR connectors + PCI-E graphics connector just to power it up. (2*DP240 + GTX7800).

    Quote from: fafner on 17-November-05, 01:37:16
    Yes any big computer store should have the adaptor you need.  I have one in one of my systems.
    Ok,  have to check out few places then. I haven't seen any on those places I usually shop with. And if anyone knows a place in Finland where to get one, I'd appreciate that.
    And for the other suggestions. Do not worry, the PSU has several +12V rails, it has -5V and all the sounds are fine =)

  • 30 pin vga adapter

    just bought a 3rd generation iPad running iOs 6.1.2. i purchased the vga adapter so i could continue to run ppt for my class without lugging around a laptop. however, i cannot get the adapter to work. i've tried many suggestions as far as unplugging/replugging it in and refreshing the source input. Still nothing. Is it true that ios 6 doesn't support vga when apple's sti

    How are you viewing the PPT? The dock video output is not a generic feature in iOS.  Rather, individual applications must support it, and many don't.  For example, the video app does, but (I've learned), the Xfinity app doesn't.
    Test it with the video app to see if it works at all, then start investigating PPT viewers to find one that will work.

  • 30-pin hdmi adapter stopped working

    I have a 3rd generation ipad with a 30-pin connector. I bought an hdmi adaptor and it worked fine for a dozen or so times. After a reboot it stopped working. ipad running iOS 6.1.3. My iphone is on the same version of ios but the adaptor works on my phone.

    Cleaning the docking port didn't help. My other accessories still work.

Maybe you are looking for