Lightning port adapter for midi?

What midi interface device do I use with the lightning connector? I just purchased the IPAD Retina display to connect to my midi keyboard and all force me to use a female USB connector to connect to midi interfaces that use the old IPAD2 connectors. is there a direct connect to lightning port? thx Hotllama

Cable Win Technology has them. Can't help you with the other questions.
Tony.

Similar Messages

Need a mini display port and audio to HDMI adapter for mid 2009 13" macbookpro

Can some body recomend an adapter cable that plugs into the audio (mid 2009 MacBookPro 13") and mini display port and outputs to HDMI with audio and video all together for a TV? I would rather not run a separate audio cable in addition to the HDMI cable.

http://www.kanexlive.com/iadapt51 - 5.1-channel surround sound from sources that provide such a signal
http://www.kanexlive.com/iadapt20 - 2-channel stereo sound

Mini DisplayPort to DVI-D Dual Cable/Adapter for mid-2010 iMac?

Hi . . .
Sorry to pester with a question that's been covered from various angles before, but I'm new to the Mac world. Am a musician in BC, Canada doing a project remotely with people in Ontario. Decided to ditch my PC-based recording rig and went with a 2010 iMac and Logic Pro X (hallelujah!) because the other people are using Logic Pro X. So . . . I'm just learning the ropes.
Anyway . . . I have a spare monitor I want to run in dual setup extended desktop, and I'm not 100% certain of the cable and/or adapter I'll need. I'm also not sure why the adapters are bigger and seem to contain more internal components, whereas the cables just look like a simple "Plug 1" connected to "Plug 2" cable in a variety of lengths (in the same way you'd have a XLR to 1/4" phono cable).
Here's the info on my system, and any help would be greatly appreciated (will a cable suffice or do I need an separate adapter, DVI type, etc).
My iMac (mid-2010 21" Core i3 with Firewire running Moutain Lion 10.8.5):
http://www.everymac.com/systems/apple/imac/specs/imac-core-i3-3.06-21-inch-alumi num-mid-2010-specs.html
My monitor I want use as an extended desktop (Acer 22" X223W LCD):
http://reviews.cnet.com/lcd-monitors/acer-x223w-lcd-monitor/4507-3174_7-32627876 .html
So, it appears I'll need a male Mini DisplayPort to a male DVI-D Dual adapter and/or cable. Do I need to specifically buy a DVI-D Dual cable? Will a simple cable function properly or do I also need an adapter? I'm pretty sure a DVI-I cable won't work because it would have extra pins that aren't present in the DVI-D.
Thanks again . . . the assistance is appreciated.
Suds . . .

You are overthinking this.
"DVI dual link support" is concerned about the resolution of the display, not the number of displays.   A dual-link adapter or cable basically has double the number of wires to carry extra data to support higher resolutions than a single-link cable. Of course, both the computer and the external display must also support the higher resolutions in order to take advantage of the capabilities of dual-link.
You want to use two displays ... your iMac's buit-in display + your Acer display as a second monitor (what you called "dual monitors"). You can do this, as I explained earlier.
Your Acer monitor's maxiumum resolution of 1680 x 1050 is not high enough to require a dual-link connection.
"In single-link mode, the maximum pixel clock frequency is 165 MHz that supports a maximum resolution of 2.75 megapixels (including blanking interval) at 60 Hz refresh. For practical purposes, this allows a maximum 16:9 screen resolution of 1920 × 1080 at 60 Hz (1915 × 1436 at a 4:3 ratio).
To support higher-resolution display devices, the DVI specification contains a provision for dual link. Dual-link DVI doubles the number of TMDS pairs, effectively doubling the video bandwidth. As a result, higher resolutions up to 2560 × 1600 are supported at 60 Hz [via dual-link DVI]."   (See Digital Visual Interface, Wikipedia)
You can connect almost any VGA, DVI or HDMI display to your iMac, using the appropriate cable and/or adapter. Of course, you always have to make sure that your cable has the correct gender plug on each end.   The Apple adapter I recommended has a female connector, so you will need a cable with a male DVI-D plug on one end. As for the other end of the cable, check the input on your Acer display to see what it has and select a cable that has an appropriate gender connector on the end that will plug into your Acer monitor.
In extended desktop mode, you can set separate (independent) resolutions for your iMac display and your external Acer display, taking advantage of the maximum resolution of each.   (For example, that's why the MacBookPro example you cited works, it's because that model MacBook Pro can support higher resolutions on an external display than it's built-in LCD panel can.)

Best Mini Display to DVI adapter for 2011 17" MBP w/no blocked ports!

I am looking to get a Mini Display to DVI adapter for my 2011 17" MBP.
+(Preferably it would even be one with a 6' cord.)+
It is not clear which one I should buy. Apple's (adapter only, no cord), is $30, while I can see others for far less on Amazon.
I have read that some of these adapters actually block the FW800 and USB ports on either side.
A blocked, or displaced FW800 port is a deal breaker.
1. Can someone with a 2011 17" MBP tell me that they have either one of these adapters, or the one with the cord, and that it doesn't block their FW800 port? (I'll pay the $30 (albeit grudgingly) if its the only one that works.)
2. This may be a dumb question, but the specs on these adapters say that they are capable of 1080p resolution. Would that mean they would work with a 1920x1200 monitor?

You might want to try the "MBP Display" discussion threads, might be able to find what you are looking for in there or get better support there.
I don't think I can help very much, but I have the Apple's adapter (no cord) and it doesn't block my usage of FW.

I have a belkin 7 adapter for additional USB slots for my Mac Pro. It was working well till just recently I am getting a message that says the usb port on the Mac Pro is shutting down due to a very high power drain. Then it shuts the usb port down.

I have a belkin 7 adapter for additional usb ports for my mac pro. It worked fine without problems till recently when the message regarding usb port drawing too much power and the computer shuts the port on the mac pro down. The strip comes with its own power supply adapter. The attachments are additional hard drives used as backups and independent data. Other than disconnecting it are there any fixes?

You're getting the message because you're exceeding the available current, probably as a result of bus-powered drives. The power sources for hubs are rather small. Try using drives with their own power supplies.

Can i use the lightning to usb camera adapter for sony cybershotdsc-w380

DDoes anyone know how to use a lightning to sub camera adapter for a Sony cyber shot doc-w830

This discussion may help.
It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards.

I recently bought a lightning to 30 pin adapter for my new iPad so that I could continue to use my 30 pin to VGA cord, but when I plug the VGA cord into it it says it is not supported. They are all apple products, so why doesn't it work?

I recently bought a lightning to 30 pin adapter for my new iPad so that I could continue to use my 30 pin to VGA cord, but when I plug the VGA cord into it it says it is not supported. They are all apple products, so why doesn't it work?

If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

USB adapter for docking port Screen hp split x2

Hi! I would like to know if there is a USB adapter to connect to the expansion port on the bottom of the screen Hp Split x2 m121sa. The USB adapter for HP Elite h n46aa pad is compatible with my HP Split x ? I thank

Hi, No. The product says: Expand what you can do with a suite of accessories designed specifically for the HP ElitePad and turn a true business tablet into a total business solution.Simply connect one end of the adapter to the HP ElitePad, and connect to your USB device on the other end. Then pack and go when you’re ready to disconnect.Get the peace of mind of a one-year limited warranty. Additional support is available (North America only) seven days a week, 24 hours a day by phone as well as through online support forums. and your machine: http://support.hp.com/us-en/product/HP-Split-13-x2-PC/5401170/model/5442928/document/c03944512/ Regards.

Can i get an adapter for macbook to make hdmi port?

can i get an adapter for macbook to make hdmi port?

Yes, but the one you need depends on the specific MacBook you have.
Earlier MacBooks use a Mini-DVI and later ones use a Mini DisplayPort for their video output. To find out which MacBook you have, go to the  (Apple menu) and choose About This Mac. Click More Info... and in the System Profiler window that opens, choose Hardware. Your Model Identifier will be shown.
For MacBook1,1 though MacBook4,1 choose a Mini-DVI to HDMI Adapter
For MacBook5,1 and later choose a Mini DisplayPort to HDMI Adapter
Either one is commonly available for less than $10.

Cheap lightning to 30pin adapter for charging only?

I don't really care about the A2D chips for analog audio, I just want to use my many 30pin charging cables to charge my iPhone 5 around the house. Does anyone make a cheaper lightning to 30pin adapter for charging purposes only? Is this even possible?

I don't really care about the A2D chips for analog audio, I just want to use my many 30pin charging cables to charge my iPhone 5 around the house. Does anyone make a cheaper lightning to 30pin adapter for charging purposes only? Is this even possible?

Lightning Adapter for dsx-s100?

I have a DSXS100 Head Unit that I have been enjoying for years. Recently I replaced my iPod Touch with a new one. I am wondering if there is a lightning-USB adapter that will work with it in the Tune Tray.(to replace the 30 pin XA50-ip that it came with. I'm currently using the apple cable, but it's a bit of a squeeze.
Solved!
Go to Solution.

Only the supplied iPod XA-50IP USB connector was designed to work with the DSX-S100 Car Stereo. We currently do not have any adaptor that will work with the newer iPods.
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/LapMagWin

Ac adapter for Linksys model # EZXS88W 10/100 8-Port workgroup Switch

Please, need help finding and obtaining an AC Adapter for Linksys model3 EZXS88W 10/100 8-Port Workgroup Switch. what info do I need to narrow my search, any websites? be blessed and keep looking up!
(\O/)
/_\ ANGEL!!
Jay Paul Wilder,RN _
Be Blessed and Keep Looking Up! (\O/)
*************************************** /_\ Angel*

Try to check on this link to check the power specs of the adapter.

Will there be a composite av adapter for the lightning plug

They have the composite av adapter for the 30 pin connectors so you can hook the older phones to a TV with the yellow, red and white cables.
Will they come out with one for the lightning?
Or is is best to use the lightning to hdmi and get a hdmi to composite cable if they are available

The best solution I've found so far is using an Apple Lightning Digital AV Adapter -> HDMI cable -> Mini HDMI2AV Converter -> AV composite cables. I haven't used it myself but people over at the MacRumors forum have reporeted success.

Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it?

Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it? Just in case it makes a difference I am trying to hook up an Avid Mbox Pro for Pro tools.

What is the part number and model of Firewire adapter?
I have used them in the past without any problems whatsoever.
Allan

I have the old skool Monster car cable--i tune in the channel on the Monster cable and my old iPod plays. I bought the adapter for Lightning to accommodate the new iPod i just bought. But it won't play. ***?

I have the old skool Monster car cable--i tune in the channel on the Monster cable and my old iPod plays. I bought the adapter for Lightning to accommodate the new iPod i just bought. But it won't play. ***?

It could just be a compatibility issue. Have you tried resetting the Nano with everything connected to see if that makes a difference?
To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock

Lightning port adapter for midi?

Similar Messages

Maybe you are looking for